Download Microsoft.BrainDump.70-643.v2011-12-07.by.Bobycar.274q.vce

Exam:	70-643 TS: Windows Server 2008 Applications, Configuring
Size:	13.16 MB
Posted:	07-Dec-2011
Votes:	113
Download:	Microsoft.BrainDump.70-643.v2011-12-07.by.Bobycar.274q.vce

Comments

* The most recent comments are at the top.

shatha from Kuwait - Feb 22 2012, 6:30 PM Report Spam

Valid passed with 800
15-20 new questions
Seo from Korea, Republic of - Feb 22 2012, 3:30 PM Report Spam

still valid 20 new question. 900/1000... pass... unexpectedly... ^^;;;
Dirk from United States - Feb 21 2012, 8:57 PM Report Spam

Dump is valid in the US as well. Same as everyone else has said, 80 questions with 50 counting.
Umer Azeem from Pakistan - Feb 21 2012, 3:28 PM Report Spam

933/1000.dumps still valid 100%. almost 20 questions were new. total questions was 80. but marking is done only on 50 questions.............................so enjoy guyz !!!!!!!
the lazy sysadmin from Romania - Feb 21 2012, 1:53 PM Report Spam

hello everybody! still valid. there are 30 questions that don't count for the final score. 900/1000 :)
shru from India - Feb 21 2012, 12:16 PM Report Spam

Hi
Exam contains 80 q's but some of them are not from dump still easy to manage if u have study this dump well
MCITP from Netherlands - Feb 21 2012, 12:03 PM Report Spam

MS exams never contains 80 questions that count for your score. Proberly you missed the text at the start what says that the 30 questions are not counting for your score...
DumbDump from Switzerland - Feb 21 2012, 11:30 AM Report Spam

Failed the test today. 80 questions. It's not sure, if there are counting now all questions. be aware...
Luk from Poland - Feb 21 2012, 10:10 AM Report Spam

If anyone could tell the subject of new questions on the exam. At least a few that are not in the dump. Perhaps even the real question?

thanks a lot everyone
Luk
Mr A from New Zealand - Feb 21 2012, 12:08 AM Report Spam

who has those 30 new questions? Please upload it. thanks
emad abdo from Egypt - Feb 20 2012, 8:30 PM Report Spam

this dump need update, more than 30 new question.
koena from Unknown - Feb 20 2012, 1:56 PM Report Spam

Koena From South Africa this exam is valid i did pass on 17 february with 800 score
n3tw0rk3r from Netherlands - Feb 20 2012, 1:03 PM Report Spam

Did exam last Friday, passed with 866/1000! 30 new questions but I guess they were not counting for the total score (i'd totally screw up if they would count)...

Thanks again bobycar and all the other!
shiko from Israel - Feb 20 2012, 1:00 PM Report Spam

the dump still valid 866/1000
Mohamed Zahran from Egypt - Feb 20 2012, 11:38 AM Report Spam

this dump need update, more than 30 new question.
Samet from Unknown - Feb 20 2012, 10:37 AM Report Spam

Passed w/ 966. 80qs. I can confirm at least 6 were diskpart and the rest were media services (drag and drop) and additional sharepoint "point and shoots". That being said, I only studied this dump...nothing else. It's very obvious the new questions aren't scored because I'm sure I missed at least 15 of the new ones. Don't freak out, just know this dump and you'll be fine. Thanks to bobycar and others who contributed.
mohamed mostafa from Egypt - Feb 20 2012, 8:18 AM Report Spam

The dumb is valid.My score is 866 .20 new questions.I advice any one to study the dump very hard before enter the test to be certain form success.
thanks allah
Kaban from Latvia - Feb 19 2012, 11:58 PM Report Spam

Pass with 800 - 80 questions
30-40 new questions - other questions from this dump.
Momen from Egypt - Feb 19 2012, 10:04 PM Report Spam

The dumbs is valid i scored 866 . but exam include about 15 new questions from 80 (Diskpart it is a new in this exam)
ahmed from Egypt - Feb 18 2012, 10:07 PM Report Spam

plz plz plz any one passed with 80 questions post these new questions watever 15 new or 30 new questions ?
tas from Spain - Feb 18 2012, 4:21 PM Report Spam

Spain : 800/100 - 80 questios
20-25 new questions - 60-55 questions of this dumb
Some questions has small changes that change the correct solution.
@SS from Unknown - Feb 18 2012, 2:34 PM Report Spam

Took the test today. Scored 966. The dump is still very much valid. About 20 new qs. 6 qs on diskpart. Cant really remeber the rest of the new qs. It does state in the beginning that there are a few new qs that will not be marked. So am assuming they dont count towards the final score. Good luck to all those yet to take.
Seo from Korea, Republic of - Feb 18 2012, 1:54 AM Report Spam

new questions... 665/1000...... watch out!
samani from Egypt - Feb 17 2012, 6:59 PM Report Spam

The dumbs is valid i scored 766 . but exam include about 15 new questions from 80
Samet from India - Feb 17 2012, 12:30 PM Report Spam

@sharpE
Good catch. You're right, I looked past the definition of the log file and thought of it as a system log file. Thanks for the clear input!
umer from Pakistan - Feb 17 2012, 10:41 AM Report Spam

886/1000 valid .but 80 questins.
fifa from China - Feb 17 2012, 2:10 AM Report Spam

n3tw0rk3r from Netherlands , the file is not valid,plz corect it. The size is 0.
Quality man from South Africa - Feb 16 2012, 10:43 AM Report Spam

100% valid passed today with 900 score mark, but the exam has 80 questions, thanx a lot guys keep
Kevern from Unknown - Feb 16 2012, 9:21 AM Report Spam

Wrote this today, passed with 733, about 20 new question, if i can give any advise know this exam really well, the new questions if i can remember some, were based on running command line tools for adding a drive to raid-5, mirroring a drive, basically know command line disk utilities. best of luck
sharpE from United Kingdom - Feb 16 2012, 5:39 AM Report Spam

@Samet: the answer there is "High".
It does not need Full - if you look closer, the requirement is to write to a specific log file, not the system eventlog.
And "medium" does not qualify, as the app needs permisions to write to a file OUTSIDE it's working directory (again, check the definition of the log file).
Sultan from India from Unknown - Feb 15 2012, 5:56 PM Report Spam

All thanks to Allah & beloved prophet & my peer o Mursheed
i Got 866/1000
80 questions 50 from this dump & 30 extra
mostly extra q depend on raid diskpart command & ftp
& ofcorse thanks Bobycar for ur effort
Samet from India - Feb 15 2012, 1:18 PM Report Spam

This question needs some clarification:

You install the Web Server (IIS) on a server that runs Windows Server 2008 R2.
You install a Microsoft .NET Framework application on a Web site that is hosted on the server in a folder named wwwroot.
The .NET Framework application must write to a log file that resides in the Program FilesWebApp folder.

You need to configure the .NET Framework trust level setting for the Web site so that the application can write to the log file.
What should you do?

Set the .NET Framework trust level to Full for the Web site.
Set the .NET Framework trust level to High for the Web site.
Set the .NET Framework trust level to Medium for the Web site.
Set the .NET Framework trust level to Minimal for the Web site.

The stated answer selects "Medium" as the trust level. Please reference this TechNet Article: http://technet.microsoft.com/en-us/library/cc754779.aspx

After examining the article, an easy way to digest it is to ask, "Okay, what's the difference between FULL and HIGH? What rights get taken away once I bump down to HIGH? By default, HIGH CANNOT write to the event log. Restrictions get even worse as you lower the trust level and more and more items are taken away by default. Therefore, the only way you can meet the stated requirement is to use a custom trust or select FULL! There is no option for custom trust in the provided answers so I'm defaulting to FULL as the answer. Comments?
Faheem South Africa from Unknown - Feb 15 2012, 9:37 AM Report Spam

Just passed with 833, 80 questions of which 50 are only taken forward to your exam count, dump is 100% valid!and thanks guys for all the help
raddon from Hong Kong - Feb 15 2012, 8:53 AM Report Spam

nobody update 70-643 the latest dump in here very long time.......so mournful and worry the exam>.<"
MCITP from Netherlands - Feb 14 2012, 10:20 PM Report Spam

I will take the exam on 16th of march. I studied the book en this dump and some technet documents. I give it a shot and hope I will pass on this one! No one knows when the new questions are shuffeled into the normal pool....
Muhras from United States - Feb 14 2012, 6:42 PM Report Spam

@Tamas @Oranges, I highly appreciate your valuable feedback, it is people like you and a website like ExamCollection who make the hard studdying for an exam worthwhile. Thanks a ton all!
Oranges from United States - Feb 14 2012, 3:59 PM Report Spam

Samet- You're very welcome. I tried to answer all the concerns I had going into the exam.
Oranges from United States - Feb 14 2012, 3:55 PM Report Spam

Faheem- Yes the 50 question that counted were from the dump.
Tamas from United Kingdom - Feb 14 2012, 2:25 PM Report Spam

Just passed this morning in the UK... Scored 833/1000... 80 questions, 2-3 Drag&Drops, 2 Point&Shoots... I'm only studied this dump, roughly 20 new questions, I reckon most of the new questions were some kinda research questions because I didn't have a clue about the answers and I still passed... I know I got a few answers wrong from this dump, I couldn't prepare well enough for this test... So this dump alone should be enough for a PASS...

Thanks a lot everyone, and keep this site rollin'...
Samet from India - Feb 14 2012, 12:41 PM Report Spam

@Orange Thanks for the detailed input, man. That pretty much sums up what I was wanting to know.
horizon from Unknown - Feb 14 2012, 9:30 AM Report Spam

elhmdullilah
Thx Bob for your efforts passed with 800 , 80 questions
thx for all
Faheem from Unknown - Feb 13 2012, 7:37 PM Report Spam

Hey Orange, were the 50 questions from this dump?
Oranges from United States - Feb 13 2012, 7:27 PM Report Spam

Took exam today and passed with 866 score. Total of 80 questions. If you read the screens before the test it tells you there are questions in the exam that do not count toward your score. Of the 50 questions that counted I did not have a drag and drop or a point a click. Best of luck to you all.
Sabirila from Brazil - Feb 13 2012, 6:22 PM Report Spam

Approved today 13/02/2012. I think that microsoft is updating their exams because I did a test with 80 questions. Dump valid.
Tuhafeni from India - Feb 13 2012, 3:20 PM Report Spam

I take my exm 2day but 30 new quetion 7 on remote Desktop, 10 diskprt... any way pass 800 bt i am sure miz 16 quetion
hesham nasr from Egypt - Feb 13 2012, 3:15 PM Report Spam

alhamed to Allah
Dump is 100% valid 80 q
pass today with 800/1000, but have 16-18 new questions
irshaad from South Africa - Feb 13 2012, 12:46 PM Report Spam

i just passed today with 700/1000 there were 10 new questions . bt thanks bobycr for the dump this dump is stilll valid .
D@$hti from Pakistan - Feb 13 2012, 9:06 AM Report Spam

Leabanon how many quiz were inside test.
Lebanon from Lebanon - Feb 13 2012, 8:17 AM Report Spam

passed the exam 2 days ago in beirut, got 933 :) , 1 or 2 new questions
subal from New Zealand - Feb 13 2012, 2:37 AM Report Spam

Last week passed this exam with 900 score. Used only this exam and technet. 80 questions (I think 30 questions were pilot questions).
Oranges from United States - Feb 12 2012, 11:03 PM Report Spam

TO- How did you score? Did the questions count toward your score? How many total questions did you have?
TO from United States - Feb 12 2012, 8:55 PM Report Spam

Took the test on 2/10. Couldn't tell you exactly how many new question there were, but it was around 20. Most of the new questions were on Windows Media Services. There were also about 5-6 questions on the diskpart command (ie: you have a RAID 5 config and need to replace a disk, what command do you run before replacing the disk). There were still a good number from this dump on the test, but you're going to have to do some extra studying on the Media stuff and need to learn all the diskpart commands.
sharpE from Czech Republic - Feb 12 2012, 6:42 PM Report Spam

well, I cannot tell if the new questions count or not to the final score. I made some educated guesses there, but was still guessing nevertheless...
from previous exams I took I know that if there are test-questions that are not rated this thing is notified in the pre-exam part. It might have been the case here as well, but I did not read that part, just next-next-next-start exam for me.
I got 966, fyi.
I just wanted to share the info about the new questions. How come that is a bad thing ?
Orkhan from Azerbaijan - Feb 12 2012, 9:27 AM Report Spam

80 questions, 30 new questions,,, this dump is valid in Azerbaijan,, 866/1000
Samet from India - Feb 12 2012, 8:56 AM Report Spam

@sharpE Don't get your panties in a wad. It just seemed strange that 30 new questions popped up all of the sudden and that people knew the count was 30. If you wanted to be helpful you could have posted your score so we can evaluate if those 30 new questions were weighted in the test at all. I'm assuming by your snarky attitude that you were too butt-hurt to admit you failed. I know the mods will censor this, lol.
Jarhead from Kuwait - Feb 11 2012, 5:15 AM Report Spam

I think the extra questions are getting ready for a new test. I did not have one question on diskpart but I had a lot of questions on Windows Media and WDS that were not in this dump
Peter from South Africa - Feb 10 2012, 4:18 PM Report Spam

Yes, I had 80 questions. maybe there wer not 30 new questions as i said earlier, but there were quite a few. about 6 or 7 on diskpart, so learn those. 682/1000 for me. bummer. In South Africa
Jarhead from Kuwait - Feb 10 2012, 4:15 PM Report Spam

Just took and passed test with 933. Had 80 questions but I don't think they count towards the grade. I'm pretty sure that I missed at least 15 questions.
drainbamage from United Kingdom - Feb 10 2012, 3:55 PM Report Spam

do these new questions count towards your exam result? i heard that microsoft were adding the questions, but they don't count towards your result.
sunet from Unknown - Feb 10 2012, 3:09 PM Report Spam

Dump is 100% valid.
pass today with 866/1000, but have 16-18 new questions.
Thank you. Bobycar
Marco from Hong Kong - Feb 10 2012, 2:33 PM Report Spam

Passed today with 860 score, but have 15 new questions.........
MCITP from Netherlands - Feb 10 2012, 2:18 PM Report Spam

hmmm, that is unfortunate. I am currently learning from the book and practice the questions. Is it true that the exam contains 80 questions? Exams usually count 50 questions. I hope the coming weeks, something more is known regarding the changes in the 70-643 exam.
sharpE from United Kingdom - Feb 10 2012, 1:42 PM Report Spam

well, mate, 3 people in a row are trying to help others. You can call it strange, but it's real. There were AT LEAST 30 questions that are not present in the dump.
Samet from India - Feb 10 2012, 12:34 PM Report Spam

All of the sudden there are 30 new questions? Can anyone else verify this? I find it strange that three people in a row can identify 30 is the count of new questions.
Peter from South Africa - Feb 10 2012, 8:32 AM Report Spam

At least 30 new questions. 6 on diskpart command.
Really difficult. Failed with 682, South Africa
Karam from Egypt - Feb 09 2012, 8:05 PM Report Spam

Pass the exam today, 80 questions, at least 30 new ones.
sharpE from United Kingdom - Feb 09 2012, 6:49 PM Report Spam

took the exam today, 80 questions, at least 30 new ones.
so beware :)
Cegano from Germany - Feb 09 2012, 1:59 PM Report Spam

dump 100% valid brothers. passed today
thank you brother bobbycar
kaddisch from Germany - Feb 09 2012, 10:18 AM Report Spam

Still valid in Germany, passed yesterday with 885. 2 new questions. Thanks Bobycar
tom from Israel - Feb 09 2012, 9:01 AM Report Spam

passed today with 900
still valid
Mohamed El-Shenawey from Egypt - Feb 07 2012, 8:32 PM Report Spam

This dump still valid , Passed to day with 1000/1000 -:)
Thanks GOD
Tech from United States - Feb 07 2012, 8:29 PM Report Spam

Here is what I read from the Microsoft 70-643 Training Kit book
boot image - a WIM file you can use to boot a bare metal computer (no OS)

capture image - a special boot image used to start a master computer (one with an OS) and upload an image of that computer to WDS

image group - it is a place where you store capture images.

Since the question reads you are trying to capture an image of a server that already has an OS, you don't need a boot image. Before you create a capture image, you need to create a place to store that image, that's why the first step is to create an image group.

I will verify tonight.
AME from Egypt - Feb 07 2012, 4:19 PM Report Spam

Passed today 1000 alhamed to Allah
thank you babyacar all Q from this dump
horizon from Unknown - Feb 07 2012, 12:29 PM Report Spam

Hi Folks,
some questions are Wrong
Exam I / 4: not B , it is A
Exam I / 16: not B , it is C
Exam C / 17: not D , it is B
mlindo from south africa from Unknown - Feb 07 2012, 8:52 AM Report Spam

Passed today...thank you bobcar
AME from Egypt - Feb 07 2012, 7:01 AM Report Spam

mayby The correct answer is Add image group

(not boot & not install)
Thanks be to Jesus my LORD and God from Australia - Feb 07 2012, 6:52 AM Report Spam

@David & Tech.

The correct answer is boot. Install is **wrong**.

As ednr said below: http://www.windows-noob.com/forums/index.php?/topic/261-how-can-i-capture-an-image-using-wds/

In WDS you can either add boot image OR discover image.

The actual image/install is done after the booting, so Boot as 1st step is correct. (also note the answer in the dump - where the answer is "install", there is no "explanation" when you show answer. In the question that has the answer as "boot", when you click show answer there, an explanation from technet pops up - again Boot is correct)
AME from Egypt - Feb 07 2012, 6:25 AM Report Spam

Tech you are right
Q :
You have a reference computer named Server1 that runs Windows 2008R2.
You need to capture an image of Server1 to WDS1.
What should you do first?
a) Start Server1 from Windows7 installation media
b) Add boot image to WDS1
c) Add image group to WDS1
d) Add install image to WDS1
answer : c) Add image group to WDS1 first after that Add boot image to WDS1

the answer in same dump in exam k (Q Build and Reorder)

but the Q: Build and Reorder:
Your network uses Multiple Activation key (MAX) licenses.
A network technician performs a Server Core installation of Windows Server 2008 R2.
During the installation, the technician dose not enter the licenses key.
you need to activata Windows Server 2008 R2 on the server.
What should you do?
the answer not correct maybe
my answer :
Run slmgr,vbs -ipk
Run slmgr,vbs -ato
Run shutdowm.exe /r
Tech from United States - Feb 07 2012, 4:15 AM Report Spam

David,
Here is a link from Technet. Correct answer should be image group.
http://technet.microsoft.com/en-us/library/dd363560(WS.10).aspx
It is in the second paragraph,
"To deploy .vhd images, follow the steps in this section. First, you will need to create an image group and add images to it. Then you create an unattend file and configure the server. After that, you will be ready to deploy and image. Note that configuring multicasting is optional."

First step is to create image group, then create install image.
Tech from United States - Feb 07 2012, 4:04 AM Report Spam

David,
I actually believe the correct answer is image group. That is the first step before you can do anything.
NK from Israel - Feb 06 2012, 6:45 PM Report Spam

100% valid. Passed 866 (just too stupid to get 1000..:-)
ednr from Egypt - Feb 06 2012, 6:10 PM Report Spam

As usual all the pride and cherished For Examcollection and it's subscribers

Today ,pass 966/1000 , 100% valid , all Questions From This Dump

Thank You All.
Haitham from Egypt - Feb 06 2012, 5:54 PM Report Spam

100% valid dump . scored 866/1000
yarab fadel two tracks w a7'alas
..... Haitham
Muhammmad Noshairwan from Pakistan - Feb 06 2012, 5:24 PM Report Spam

100% valid dumps got 933 marks today ...!
David from United States - Feb 06 2012, 5:13 PM Report Spam

Tech I wondered the same thing. I think the answer is install image so if the other question comes up just answer install image so you can memorize it and know that you got it right even if your score doesn't reflect it.

I wish someone would confirm the answer though just for both our peace of mind.
Raza from Pakistan - Feb 06 2012, 9:06 AM Report Spam

Dumps is 100% valid. I passed the test with 933 marks.
Ahmed from Egypt - Feb 05 2012, 9:54 PM Report Spam

100% valid...passed today in Egypt :)
Tech from United States - Feb 04 2012, 11:21 PM Report Spam

Please verify correct answer. On Windows Deployment Section, item #3 and #9 are the same question with different answers.

You have a reference computer named Server1 that runs Windows 2008R2.
You need to capture an image of Server1 to WDS1.
What should you do first?
a) Start Server1 from Windows7 installation media
b) Add boot image to WDS1
c) Add image group to WDS1
d) Add install image to WDS1

One question has add boot image to WDS1, the other question has add install image to WDS1.
Erkan from Unknown - Feb 04 2012, 6:35 PM Report Spam

100% valid dump...... passed today with 800. Thanks bobycar
Prince Varghese from India - Feb 04 2012, 6:07 PM Report Spam

100% valid dump...... passed today with 966. All Qs are from this dump only.
Its an amazing work by Bobycar. You are greate Bobycar..........................
Cosmo from Canada - Feb 04 2012, 4:46 PM Report Spam

Valid!
Scored 1000 this morning!
Thanks for the upload!!!!
Salar from Pakistan - Feb 03 2012, 1:17 PM Report Spam

It's valid. Today I got 933
Ashok kumar from India - Feb 03 2012, 11:09 AM Report Spam

Hi everyone,
100% valid in India passed today with 840. All Qs are from this dump.
It is really a great dump with explanations. Thank u Bobycar
Duffy from Canada - Feb 03 2012, 3:03 AM Report Spam

Hey guys thanks for all your comments as I'm gonna start tackling this one. I noticed two NEW QUESTIONS being experienced. One about WDS? The other I have no idea....

Could anyone PLEASE post exactly what the questions are, and the possible answers? That way we can update the dumps more accurate as well? Thanks so much for your input it's HUGE to all of us in the same struggle! Take it easy!
guy incognito from Germany - Feb 02 2012, 6:50 PM Report Spam

Passed also on today with 933 score.
And it is true, the Dump is still 100% valid, I had no new questions!
Gabriel from Uruguay - Feb 02 2012, 5:59 PM Report Spam

Passed today with 933 score. Dump 100% valid, no new questions
MCITP from India - Feb 02 2012, 2:54 AM Report Spam

Thanks Bobycar for your laudable efforts !!!

Passed with a great score. 2 New Questions !
qas from Pakistan - Feb 01 2012, 5:46 PM Report Spam

i pass today 883/1000 dump is valid in pakistan ,two or three question are new
Sadique from Kuwait - Feb 01 2012, 9:49 AM Report Spam

Alhamdulillah i passed two days back with 933 marks in Kuwait, only refered this dump.
Thanks Bobycar for your good effort.
md from Turkey - Feb 01 2012, 7:35 AM Report Spam

@irshaad,

only this dump enough to pass.. I passed two days ago..

Vote For This File

Add Comment

Site Search:

Download Microsoft.BrainDump.70-643.v2011-12-07.by.Bobycar.274q.vce

Comments

Vote For This File

Add Comment

How to Open VCE Files

How to Create VCE Files

Easy Way to Convert PDF to VCE

Upload Your VCE File

Stay Up With The Latest VCE Uploads