

Juniper JN0-364 Exam Questions & Answers, Accurate & Verified By IT Experts
Instant Download, Free Fast Updates, 99.6% Pass Rate

69 Questions & Answers
Last Update: Oct 24, 2026
$69.99
Juniper JN0-364 Practice Test Questions in VCE Format
| File | Votes | Size | Date |
|---|---|---|---|
File Juniper.practiceexam.JN0-364.v2026-09-11.by.eva.7q.vce |
Votes 1 |
Size 35.21 KB |
Date Sep 11, 2026 |
Juniper JN0-364 Practice Test Questions, Exam Dumps
Juniper JN0-364 (Service Provider Routing and Switching, Specialist (JNCIS-SP)) exam dumps vce, practice test questions, study guide & video training course to study and pass quickly and easily. Juniper JN0-364 Service Provider Routing and Switching, Specialist (JNCIS-SP) exam dumps & practice test questions and answers. You need avanset vce exam simulator in order to study the Juniper JN0-364 certification exam dumps & Juniper JN0-364 practice test questions in vce format.
JN0-364 is the current Juniper Networks Certified Specialist, Service Provider Routing and Switching exam. Juniper introduced it on February 2, 2026 after retiring JN0-363. The live blueprint uses a 90-minute, 65-question format and lists Junos OS 25.2, with objectives spanning switching, OSPF, IS-IS, BGP, MPLS, IPv6, tunnels, protocol-independent routing, and high availability.
The exam sits between associate Junos fundamentals and the deeper JNCIP-SP level. Its value is the way it forces multiple control planes into one operating model. A service-provider engineer needs to know not only how a protocol works in isolation but how an IGP supports loopback reachability, how BGP expresses policy, how MPLS builds transport, and how failure mechanisms preserve service when part of that system changes.
Provider networks are routing-heavy, but Ethernet switching concepts still matter at aggregation and service edges. MAC learning, VLAN tagging, bridging domains, loop prevention, and link aggregation influence how customer or infrastructure traffic reaches the routed core. Candidates should be able to recognize when a problem is still Layer 2 rather than assuming every provider fault belongs to BGP or MPLS.
Verification should include the switching table, VLAN membership, interface encapsulation, and aggregate state. A clean routing table does not prove that frames can reach the next hop. This layered habit is one of the most transferable skills in the blueprint because it prevents higher-level protocol troubleshooting from beginning on a broken local segment.
Provider Ethernet services may involve more than local access switching. Even at specialist level, understanding how tagged services, aggregated links, and bridge domains interact with routed handoffs helps explain faults at the edge of the MPLS core. Build a small provider-edge scenario in which one customer VLAN is intentionally mis-tagged, then verify the symptom before changing any routing protocol.
The current specialist exam expects knowledge of both major link-state IGPs. For each, candidates should understand adjacency formation, database synchronization, metrics, hierarchy, and route installation. More importantly, they should be able to explain the operational symptoms of a failed neighbor, a topology inconsistency, or a metric change.
Service-provider labs become more realistic when loopbacks and point-to-point links are used as the core substrate. Build the IGP first, verify every loopback is reachable, and only then layer BGP or MPLS on top. If a higher protocol later fails, that baseline lets you decide quickly whether the fault is in the underlay or the overlaying control plane.
Equal-cost multipath is another useful link between the IGP and forwarding behavior. When several next hops have the same cost, traffic may be distributed across them, which affects capacity and troubleshooting. Candidates should know how to confirm the active next hops and how a metric change or failed link modifies that set. This makes the relationship between control-plane calculation and actual path diversity visible.
BGP carries customer, peer, and upstream reachability at scale, but its defining strength is policy. Local preference, AS path, MED, communities, next-hop handling, and import or export rules allow a provider to shape routing decisions deliberately. Candidates should practice explaining the best path and the advertisement policy separately because they are related but not identical decisions.
A useful scenario has two upstream paths and one customer prefix. Change one attribute, tag a community, and apply a policy that affects only selected routes. Then inspect received, active, and advertised information. This trains the candidate to see BGP as a sequence of transformations rather than a black box that mysteriously chooses one path.
Provider routing policies often depend on communities because they allow a route to carry operational meaning across many policy boundaries. Practice tagging a customer prefix and using that tag to influence advertisement or preference elsewhere. Then remove the community and observe the difference. This creates a direct connection between the abstract community value and the service-provider behavior it controls.
Route filtering should be tested with malformed or unexpected advertisements as well as the intended customer prefix. A provider policy is only trustworthy if it rejects what should never enter the network. Use a lab neighbor to advertise an extra test prefix and confirm that the import policy drops it while legitimate routes remain available. This adds a security and stability dimension to ordinary BGP practice.
The blueprint includes MPLS forwarding, RSVP-signaled paths, LDP-signaled paths, and shortest-path segment routing. Those technologies differ in how forwarding state is established, but they all depend on clear endpoint reachability and correct interface participation. Candidates should understand the relationship among the IP route, the label, and the forwarding entry rather than memorizing only protocol names.
Troubleshooting should compare the routing table with MPLS state and protocol sessions. If labels are missing, ask whether the relevant loopback is reachable, whether MPLS is enabled on the path, and whether the signaling or distribution mechanism is active. This sequence turns an abstract label-switched path into an observable chain of dependencies.
Segment routing deserves separate attention because it reduces reliance on per-LSP signaling while still steering traffic through a label-switched network. At specialist depth, understand how segments are represented and why an IGP can distribute information used to build a path. The operational comparison with RSVP or LDP is valuable because it highlights what state moves into the network and what is computed at the headend.
A path can also be operationally valid yet suboptimal. Compare the label-switched route selected before and after a metric or segment-routing change and explain why traffic moved. This is useful preparation for questions that combine protocol state with traffic engineering, because it requires the candidate to understand not just whether a path exists but why that particular path is active.
JN0-364 includes IPv6 routing and IPv6-over-IPv4 tunneling along with GRE. Candidates should be comfortable with IPv6 static routing, OSPFv3, IS-IS, and BGP behavior, then understand how a tunnel can carry one protocol across another transport. The key is to keep outer-path reachability separate from inner-payload reachability.
A troubleshooting worksheet can record outer source and destination, inner source and destination, MTU assumptions, route availability, and policy or filter effects. That simple structure prevents confusing a tunnel-establishment problem with a payload-routing problem and makes dual-stack operations more systematic.
The current objectives include LAGs, graceful restart, GRES, NSB, NSR, BFD, and VRRP. Instead of memorizing names, candidates should identify which device state is duplicated, which failure is detected, and which traffic path remains usable. BFD, for example, accelerates detection; it does not by itself create a redundant route or link.
The most informative lab captures before-and-after state during a controlled failure. Watch BGP and IGP neighbors, label state, routing entries, interface counters, and end-to-end traffic. The difference between control-plane recovery and actual service continuity becomes obvious when those signals are observed together.
Redundancy can also create hidden capacity assumptions. If two equal links normally share traffic, losing one may keep sessions alive while pushing the survivor close to saturation. A complete failure test therefore checks utilization and latency after convergence, not just reachability. This is a useful reminder that “up” is not the same as “healthy” in a production service-provider network.
Static and generated routes, aggregates, routing instances, and policy tools let a service provider implement requirements that do not map directly to one protocol. An aggregate can reduce advertisement scale, a routing instance can separate services, and a static route can provide a deterministic path for infrastructure traffic. Each choice should be tied to a clear operational intent.
Candidates should also ask where the route lives and how it reaches forwarding. Multiple routing tables or instances make it easy to inspect the wrong context. Knowing the table, next hop, policy history, and protocol origin is often the difference between a fast diagnosis and a long search through unrelated configuration.
A strong final lab begins with JNCIA-Junos-level configuration, adds an IGP, establishes BGP, enables MPLS, introduces IPv6 and a tunnel, then tests failover. The Juniper service-provider exam transition can add historical context, but live exam study should follow the current Juniper objectives and software references.
This integrated approach also makes the professional progression more natural. The specialist exam is not a collection of unrelated chapters; it is the operational middle layer of the Juniper certification program. If candidates can explain how a route becomes a labeled forwarding decision and how that decision survives a failure, they are studying at the right level.
A final scenario should combine policy and failure at the same time. For example, remove a preferred transit path and confirm that BGP, IGP, and MPLS state all converge to the intended backup while customer prefixes remain filtered correctly. Complex but controlled exercises are effective because real provider incidents often cross protocol boundaries rather than failing neatly within one exam objective.
Keep a simple incident journal during the integrated lab. For each injected fault, write the user symptom, the first useful command, the decisive piece of evidence, the root cause, and the verification after repair. Reviewing that journal before the exam is more valuable than rereading configuration syntax because it reinforces a repeatable diagnostic sequence across several technologies.
Go to testing centre with ease on our mind when you use Juniper JN0-364 vce exam dumps, practice test questions and answers. Juniper JN0-364 Service Provider Routing and Switching, Specialist (JNCIS-SP) certification practice test questions and answers, study guide, exam dumps and video training course in vce format to help you study with ease. Prepare with confidence and study using Juniper JN0-364 exam dumps & practice test questions and answers vce from ExamCollection.
Purchase Individually


Top Juniper Certification Exams
Site Search:
SPECIAL OFFER: GET 10% OFF

Pass your Exam with ExamCollection's PREMIUM files!
SPECIAL OFFER: GET 10% OFF
Use Discount Code:
MIN10OFF
A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.
Download Free Demo of VCE Exam Simulator
Experience Avanset VCE Exam Simulator for yourself.
Simply submit your e-mail address below to get started with our interactive software demo of your free trial.
Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests