Pass Your Juniper JN0-364 Exam Easy!

Juniper JN0-364 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

JN0-364 Premium VCE File

Juniper JN0-364 Premium File

69 Questions & Answers

Last Update: Oct 24, 2026

$69.99

JN0-364 Bundle gives you unlimited access to "JN0-364" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
JN0-364 Premium VCE File
Juniper JN0-364 Premium File

69 Questions & Answers

Last Update: Oct 24, 2026

$69.99

Juniper JN0-364 Exam Bundle gives you unlimited access to "JN0-364" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

Juniper JN0-364 Practice Test 54

Question 530

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: Core traffic uses the higher-delay OSPF path because its calculated sum of interface costs is lower than the intended low-delay path. Which narrowly targeted action best resolves the demonstrated condition without introducing unrelated changes?

  1. Add a tightly scoped OSPF export policy for the intended prefix, preserving loop and source restrictions.
  2. Correct the relevant OSPF interface costs in line with the approved traffic-engineering design and validate SPF selection.
  3. Assign and verify a unique stable OSPF router ID for each router, then refresh affected neighbor state.
  4. Set the LAN interface passive within the relevant OSPF area while retaining the intended prefix advertisement.

Explanation

Correct Answer

B:

Correct the relevant OSPF interface costs in line with the approved traffic-engineering design and validate SPF selection. In the controlled acceptance rehearsal, the reported evidence is: Core traffic uses the higher-delay OSPF path because its calculated sum of interface costs is lower than the intended low-delay path. The intervention follows the governing fact that OSPF chooses routes using accumulated link-state cost along the path; interface bandwidth alone does not guarantee the intended end-to-end metric. Closure requires the corresponding specific confirmation: Calculated path costs and the active next hop match the expected path, and failover still uses a valid alternate.

Incorrect Answers

A:

Add a tightly scoped OSPF export policy for the intended prefix, preserving loop and source restrictions. This action was designed for the separate OSPF export policy omission case, not the controlled acceptance rehearsal being assessed. The present observation is: Core traffic uses the higher-delay OSPF path because its calculated sum of interface costs is lower than the intended low-delay path. Its governing mechanism is: OSPF chooses routes using accumulated link-state cost along the path; interface bandwidth alone does not guarantee the intended end-to-end metric. The narrower applicable remedy is: Correct the relevant OSPF interface costs in line with the approved traffic-engineering design and validate SPF selection.

C:

Assign and verify a unique stable OSPF router ID for each router, then refresh affected neighbor state. This action was designed for the separate Duplicate OSPF router identifier case, not the controlled acceptance rehearsal being assessed. The present observation is: Core traffic uses the higher-delay OSPF path because its calculated sum of interface costs is lower than the intended low-delay path. Its governing mechanism is: OSPF chooses routes using accumulated link-state cost along the path; interface bandwidth alone does not guarantee the intended end-to-end metric. The narrower applicable remedy is: Correct the relevant OSPF interface costs in line with the approved traffic-engineering design and validate SPF selection.

D:

Set the LAN interface passive within the relevant OSPF area while retaining the intended prefix advertisement. This action was designed for the separate OSPF passive interface case, not the controlled acceptance rehearsal being assessed. The present observation is: Core traffic uses the higher-delay OSPF path because its calculated sum of interface costs is lower than the intended low-delay path. Its governing mechanism is: OSPF chooses routes using accumulated link-state cost along the path; interface bandwidth alone does not guarantee the intended end-to-end metric. The narrower applicable remedy is: Correct the relevant OSPF interface costs in line with the approved traffic-engineering design and validate SPF selection.

Question 531

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: A service requires the MPLS EXP/traffic-class indication to reach the egress but implicit-null PHP removes the outer transport label. Which narrowly targeted action best resolves the demonstrated condition without introducing unrelated changes?

  1. Reduce the justified bandwidth request or select a path with adequate RSVP-TE reservable bandwidth.
  2. Configure and validate supported RSVP link protection with a viable bypass for the affected protected link.
  3. Verify the intended node or prefix SID advertisement in the participating IGP and the label allocation on the source and transit routers.
  4. Apply supported explicit-null disposition where the QoS design requires a labeled packet to reach the egress.

Explanation

Correct Answer

D:

Apply supported explicit-null disposition where the QoS design requires a labeled packet to reach the egress. In the controlled acceptance rehearsal, the reported evidence is: A service requires the MPLS EXP/traffic-class indication to reach the egress but implicit-null PHP removes the outer transport label. The intervention follows the governing fact that Explicit-null can preserve an MPLS label header to the egress rather than relying on penultimate-hop implicit-null popping. Closure requires the corresponding specific confirmation: A captured or traced packet reaches the egress with the expected explicit-null label and traffic-class handling.

Incorrect Answers

A:

Reduce the justified bandwidth request or select a path with adequate RSVP-TE reservable bandwidth. This action was designed for the separate RSVP reservable bandwidth shortage case, not the controlled acceptance rehearsal being assessed. The present observation is: A service requires the MPLS EXP/traffic-class indication to reach the egress but implicit-null PHP removes the outer transport label. Its governing mechanism is: Explicit-null can preserve an MPLS label header to the egress rather than relying on penultimate-hop implicit-null popping. The narrower applicable remedy is: Apply supported explicit-null disposition where the QoS design requires a labeled packet to reach the egress.

B:

Configure and validate supported RSVP link protection with a viable bypass for the affected protected link. This action was designed for the separate RSVP link protection plan case, not the controlled acceptance rehearsal being assessed. The present observation is: A service requires the MPLS EXP/traffic-class indication to reach the egress but implicit-null PHP removes the outer transport label. Its governing mechanism is: Explicit-null can preserve an MPLS label header to the egress rather than relying on penultimate-hop implicit-null popping. The narrower applicable remedy is: Apply supported explicit-null disposition where the QoS design requires a labeled packet to reach the egress.

C:

Verify the intended node or prefix SID advertisement in the participating IGP and the label allocation on the source and transit routers. This action was designed for the separate Segment routing SID advertisement case, not the controlled acceptance rehearsal being assessed. The present observation is: A service requires the MPLS EXP/traffic-class indication to reach the egress but implicit-null PHP removes the outer transport label. Its governing mechanism is: Explicit-null can preserve an MPLS label header to the egress rather than relying on penultimate-hop implicit-null popping. The narrower applicable remedy is: Apply supported explicit-null disposition where the QoS design requires a labeled packet to reach the egress.

Question 532

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: After a provider switch reboot, the wrong access switch becomes the STP root because its bridge identifier is lower than the intended core root's ID. Which narrowly targeted action best resolves the demonstrated condition without introducing unrelated changes?

  1. Validate RSTP root and alternate port roles and point-to-point link conditions before testing rapid alternate-port transition.
  2. Set a lower appropriate bridge priority for the approved root switch and validate the redundant root hierarchy.
  3. Align the MSTP region name, revision and VLAN-to-instance mapping across intended region members.
  4. Choose and configure an appropriate supported per-VLAN STP approach with documented root assignment for each VLAN.

Explanation

Correct Answer

B:

Set a lower appropriate bridge priority for the approved root switch and validate the redundant root hierarchy. In the controlled acceptance rehearsal, the reported evidence is: After a provider switch reboot, the wrong access switch becomes the STP root because its bridge identifier is lower than the intended core root's ID. The intervention follows the governing fact that Spanning-tree root election chooses the lowest bridge ID, which includes configured priority and MAC address. Closure requires the corresponding specific confirmation: The intended core device is reported as root and a designated backup root is stable after an election test.

Incorrect Answers

A:

Validate RSTP root and alternate port roles and point-to-point link conditions before testing rapid alternate-port transition. This action was designed for the separate RSTP alternate port activation case, not the controlled acceptance rehearsal being assessed. The present observation is: After a provider switch reboot, the wrong access switch becomes the STP root because its bridge identifier is lower than the intended core root's ID. Its governing mechanism is: Spanning-tree root election chooses the lowest bridge ID, which includes configured priority and MAC address. The narrower applicable remedy is: Set a lower appropriate bridge priority for the approved root switch and validate the redundant root hierarchy.

C:

Align the MSTP region name, revision and VLAN-to-instance mapping across intended region members. This action was designed for the separate MSTP region mismatch case, not the controlled acceptance rehearsal being assessed. The present observation is: After a provider switch reboot, the wrong access switch becomes the STP root because its bridge identifier is lower than the intended core root's ID. Its governing mechanism is: Spanning-tree root election chooses the lowest bridge ID, which includes configured priority and MAC address. The narrower applicable remedy is: Set a lower appropriate bridge priority for the approved root switch and validate the redundant root hierarchy.

D:

Choose and configure an appropriate supported per-VLAN STP approach with documented root assignment for each VLAN. This action was designed for the separate Per-VLAN spanning-tree path case, not the controlled acceptance rehearsal being assessed. The present observation is: After a provider switch reboot, the wrong access switch becomes the STP root because its bridge identifier is lower than the intended core root's ID. Its governing mechanism is: Spanning-tree root election chooses the lowest bridge ID, which includes configured priority and MAC address. The narrower applicable remedy is: Set a lower appropriate bridge priority for the approved root switch and validate the redundant root hierarchy.

Question 533

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: PE-12 learns an OSPF route and a static route for the same destination; operations expect the dynamic path, but the static route wins because its Junos preference is lower. Which narrowly targeted action best resolves the demonstrated condition without introducing unrelated changes?

  1. Apply a narrowly matched ingress firewall filter action that selects the intended forwarding routing instance and verify its routes.
  2. Reorder or narrow filter terms so only the designated class receives the routing-instance action while all other classes use their intended forwarding path.
  3. Explain and verify per-flow hashing behavior, then test with multiple independent flows before considering a design change.
  4. Adjust the specific route's preference or remove the unintended static route after confirming the intended failover design.

Explanation

Correct Answer

D:

Adjust the specific route's preference or remove the unintended static route after confirming the intended failover design. In the controlled acceptance rehearsal, the reported evidence is: PE-12 learns an OSPF route and a static route for the same destination; operations expect the dynamic path, but the static route wins because its Junos preference is lower. The intervention follows the governing fact that For equal prefixes in the Junos routing table, the lower routing preference is generally selected as active ahead of a route with higher preference. Closure requires the corresponding specific confirmation: The selected active prefix shows the intended protocol, route preference, and forwarding next hop both before and after a controlled failover.

Incorrect Answers

A:

Apply a narrowly matched ingress firewall filter action that selects the intended forwarding routing instance and verify its routes. This action was designed for the separate Filter-based forwarding classification case, not the controlled acceptance rehearsal being assessed. The present observation is: PE-12 learns an OSPF route and a static route for the same destination; operations expect the dynamic path, but the static route wins because its Junos preference is lower. Its governing mechanism is: For equal prefixes in the Junos routing table, the lower routing preference is generally selected as active ahead of a route with higher preference. The narrower applicable remedy is: Adjust the specific route's preference or remove the unintended static route after confirming the intended failover design.

B:

Reorder or narrow filter terms so only the designated class receives the routing-instance action while all other classes use their intended forwarding path. This action was designed for the separate Filter policy overmatch case, not the controlled acceptance rehearsal being assessed. The present observation is: PE-12 learns an OSPF route and a static route for the same destination; operations expect the dynamic path, but the static route wins because its Junos preference is lower. Its governing mechanism is: For equal prefixes in the Junos routing table, the lower routing preference is generally selected as active ahead of a route with higher preference. The narrower applicable remedy is: Adjust the specific route's preference or remove the unintended static route after confirming the intended failover design.

C:

Explain and verify per-flow hashing behavior, then test with multiple independent flows before considering a design change. This action was designed for the separate Per-flow hash expectation case, not the controlled acceptance rehearsal being assessed. The present observation is: PE-12 learns an OSPF route and a static route for the same destination; operations expect the dynamic path, but the static route wins because its Junos preference is lower. Its governing mechanism is: For equal prefixes in the Junos routing table, the lower routing preference is generally selected as active ahead of a route with higher preference. The narrower applicable remedy is: Adjust the specific route's preference or remove the unintended static route after confirming the intended failover design.

Question 534

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: A newly restarted provider router is marked overloaded and therefore not used as transit despite an up adjacency; operations incorrectly call it an IP link failure. Which narrowly targeted action best resolves the demonstrated condition without introducing unrelated changes?

  1. Ensure appropriate L1/L2 router connectivity and default-reachability design toward the Level 2 backbone.
  2. Investigate LSP flooding and neighbor stability, repairing the actual control-plane loss and refreshing current topology information.
  3. Enable the supported ISO protocol family on the participating Junos interface and validate IS-IS neighbor formation.
  4. Verify why the IS-IS overload state is set and clear it only after topology and routing readiness are established.

Explanation

Correct Answer

D:

Verify why the IS-IS overload state is set and clear it only after topology and routing readiness are established. In the controlled acceptance rehearsal, the reported evidence is: A newly restarted provider router is marked overloaded and therefore not used as transit despite an up adjacency; operations incorrectly call it an IP link failure. The intervention follows the governing fact that An IS-IS node in overload advertises that it should not be used for transit SPF paths even while adjacencies can be up. Closure requires the corresponding specific confirmation: Overload state matches the operational plan, and transit path calculations include the router only after successful readiness checks.

Incorrect Answers

A:

Ensure appropriate L1/L2 router connectivity and default-reachability design toward the Level 2 backbone. This action was designed for the separate IS-IS Level 1 exit default case, not the controlled acceptance rehearsal being assessed. The present observation is: A newly restarted provider router is marked overloaded and therefore not used as transit despite an up adjacency; operations incorrectly call it an IP link failure. Its governing mechanism is: An IS-IS node in overload advertises that it should not be used for transit SPF paths even while adjacencies can be up. The narrower applicable remedy is: Verify why the IS-IS overload state is set and clear it only after topology and routing readiness are established.

B:

Investigate LSP flooding and neighbor stability, repairing the actual control-plane loss and refreshing current topology information. This action was designed for the separate IS-IS LSP lifetime anomaly case, not the controlled acceptance rehearsal being assessed. The present observation is: A newly restarted provider router is marked overloaded and therefore not used as transit despite an up adjacency; operations incorrectly call it an IP link failure. Its governing mechanism is: An IS-IS node in overload advertises that it should not be used for transit SPF paths even while adjacencies can be up. The narrower applicable remedy is: Verify why the IS-IS overload state is set and clear it only after topology and routing readiness are established.

C:

Enable the supported ISO protocol family on the participating Junos interface and validate IS-IS neighbor formation. This action was designed for the separate IS-IS ISO family missing case, not the controlled acceptance rehearsal being assessed. The present observation is: A newly restarted provider router is marked overloaded and therefore not used as transit despite an up adjacency; operations incorrectly call it an IP link failure. Its governing mechanism is: An IS-IS node in overload advertises that it should not be used for transit SPF paths even while adjacencies can be up. The narrower applicable remedy is: Verify why the IS-IS overload state is set and clear it only after topology and routing readiness are established.

Question 535

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: A downstream tenant switch begins sending superior BPDUs toward the provider's designated port and threatens to become root for the provider spanning tree. Which narrowly targeted action best resolves the demonstrated condition without introducing unrelated changes?

  1. Enable root protection on the designated administrative boundary port where superior BPDUs must not be accepted.
  2. Apply the supported BPDU protection policy on true edge ports and investigate the unauthorized bridge attachment.
  3. Choose and configure an appropriate supported per-VLAN STP approach with documented root assignment for each VLAN.
  4. Use loop protection where BPDU loss on non-designated ports could cause an unsafe transition, after verifying platform support.

Explanation

Correct Answer

A:

Enable root protection on the designated administrative boundary port where superior BPDUs must not be accepted. In the controlled acceptance rehearsal, the reported evidence is: A downstream tenant switch begins sending superior BPDUs toward the provider's designated port and threatens to become root for the provider spanning tree. The intervention follows the governing fact that Root protection blocks a port that unexpectedly receives superior BPDUs and prevents it from becoming the root path. Closure requires the corresponding specific confirmation: The port enters the documented root-prevented state for superior BPDUs and recovers when the rogue advertisement stops.

Incorrect Answers

B:

Apply the supported BPDU protection policy on true edge ports and investigate the unauthorized bridge attachment. This action was designed for the separate Unexpected BPDU on edge port case, not the controlled acceptance rehearsal being assessed. The present observation is: A downstream tenant switch begins sending superior BPDUs toward the provider's designated port and threatens to become root for the provider spanning tree. Its governing mechanism is: Root protection blocks a port that unexpectedly receives superior BPDUs and prevents it from becoming the root path. The narrower applicable remedy is: Enable root protection on the designated administrative boundary port where superior BPDUs must not be accepted.

C:

Choose and configure an appropriate supported per-VLAN STP approach with documented root assignment for each VLAN. This action was designed for the separate Per-VLAN spanning-tree path case, not the controlled acceptance rehearsal being assessed. The present observation is: A downstream tenant switch begins sending superior BPDUs toward the provider's designated port and threatens to become root for the provider spanning tree. Its governing mechanism is: Root protection blocks a port that unexpectedly receives superior BPDUs and prevents it from becoming the root path. The narrower applicable remedy is: Enable root protection on the designated administrative boundary port where superior BPDUs must not be accepted.

D:

Use loop protection where BPDU loss on non-designated ports could cause an unsafe transition, after verifying platform support. This action was designed for the separate Loop protection after BPDU loss case, not the controlled acceptance rehearsal being assessed. The present observation is: A downstream tenant switch begins sending superior BPDUs toward the provider's designated port and threatens to become root for the provider spanning tree. Its governing mechanism is: Root protection blocks a port that unexpectedly receives superior BPDUs and prevents it from becoming the root path. The narrower applicable remedy is: Enable root protection on the designated administrative boundary port where superior BPDUs must not be accepted.

Question 536

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: A trace shows the penultimate router removing a transport label before handing a packet to the egress, and an engineer assumes the missing final label is a fault. Which narrowly targeted action best resolves the demonstrated condition without introducing unrelated changes?

  1. Reduce the justified bandwidth request or select a path with adequate RSVP-TE reservable bandwidth.
  2. Verify the intended PHP behavior and distinguish an implicit-null advertisement from an actual forwarding failure.
  3. Configure and validate supported RSVP link protection with a viable bypass for the affected protected link.
  4. Configure supported LDP-over-RSVP tunneling for the intended LSP and validate the resulting label-stack and FEC resolution.

Explanation

Correct Answer

B:

Verify the intended PHP behavior and distinguish an implicit-null advertisement from an actual forwarding failure. In the controlled acceptance rehearsal, the reported evidence is: A trace shows the penultimate router removing a transport label before handing a packet to the egress, and an engineer assumes the missing final label is a fault. The intervention follows the governing fact that Penultimate-hop popping removes the top transport label before the egress when implicit-null is advertised, reducing label-processing work. Closure requires the corresponding specific confirmation: The egress receives the expected payload context and end-to-end service passes despite the absence of a top transport label.

Incorrect Answers

A:

Reduce the justified bandwidth request or select a path with adequate RSVP-TE reservable bandwidth. This action was designed for the separate RSVP reservable bandwidth shortage case, not the controlled acceptance rehearsal being assessed. The present observation is: A trace shows the penultimate router removing a transport label before handing a packet to the egress, and an engineer assumes the missing final label is a fault. Its governing mechanism is: Penultimate-hop popping removes the top transport label before the egress when implicit-null is advertised, reducing label-processing work. The narrower applicable remedy is: Verify the intended PHP behavior and distinguish an implicit-null advertisement from an actual forwarding failure.

C:

Configure and validate supported RSVP link protection with a viable bypass for the affected protected link. This action was designed for the separate RSVP link protection plan case, not the controlled acceptance rehearsal being assessed. The present observation is: A trace shows the penultimate router removing a transport label before handing a packet to the egress, and an engineer assumes the missing final label is a fault. Its governing mechanism is: Penultimate-hop popping removes the top transport label before the egress when implicit-null is advertised, reducing label-processing work. The narrower applicable remedy is: Verify the intended PHP behavior and distinguish an implicit-null advertisement from an actual forwarding failure.

D:

Configure supported LDP-over-RSVP tunneling for the intended LSP and validate the resulting label-stack and FEC resolution. This action was designed for the separate LDP tunneled over RSVP case, not the controlled acceptance rehearsal being assessed. The present observation is: A trace shows the penultimate router removing a transport label before handing a packet to the egress, and an engineer assumes the missing final label is a fault. Its governing mechanism is: Penultimate-hop popping removes the top transport label before the egress when implicit-null is advertised, reducing label-processing work. The narrower applicable remedy is: Verify the intended PHP behavior and distinguish an implicit-null advertisement from an actual forwarding failure.

Question 537

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: A route is active locally but a new eBGP customer cannot see it because the intended route has no matching BGP export acceptance. Which narrowly targeted action best resolves the demonstrated condition without introducing unrelated changes?

  1. Apply an export policy that permits precisely the required public prefix to the designated neighbor and rejects unrelated routes.
  2. Validate Junos MED comparison rules and the contributing neighbor AS, then apply an explicit policy only if required by traffic design.
  3. Inspect negotiated hold time, keepalive behavior and actual packet loss before applying an agreed stable timer policy.
  4. Configure an approved eBGP multihop arrangement with suitable TTL and reachable peer addresses at both ends.

Explanation

Correct Answer

A:

Apply an export policy that permits precisely the required public prefix to the designated neighbor and rejects unrelated routes. In the controlled acceptance rehearsal, the reported evidence is: A route is active locally but a new eBGP customer cannot see it because the intended route has no matching BGP export acceptance. The intervention follows the governing fact that BGP route advertisements are shaped by export routing policy and eligibility rather than the mere presence of a route in inet.0. Closure requires the corresponding specific confirmation: The authorized prefix appears in the neighbor's received-route view and unrelated infrastructure addresses remain absent.

Incorrect Answers

B:

Validate Junos MED comparison rules and the contributing neighbor AS, then apply an explicit policy only if required by traffic design. This action was designed for the separate BGP MED comparison scope case, not the controlled acceptance rehearsal being assessed. The present observation is: A route is active locally but a new eBGP customer cannot see it because the intended route has no matching BGP export acceptance. Its governing mechanism is: BGP route advertisements are shaped by export routing policy and eligibility rather than the mere presence of a route in inet.0. The narrower applicable remedy is: Apply an export policy that permits precisely the required public prefix to the designated neighbor and rejects unrelated routes.

C:

Inspect negotiated hold time, keepalive behavior and actual packet loss before applying an agreed stable timer policy. This action was designed for the separate BGP peer flap from mismatched hold timers case, not the controlled acceptance rehearsal being assessed. The present observation is: A route is active locally but a new eBGP customer cannot see it because the intended route has no matching BGP export acceptance. Its governing mechanism is: BGP route advertisements are shaped by export routing policy and eligibility rather than the mere presence of a route in inet.0. The narrower applicable remedy is: Apply an export policy that permits precisely the required public prefix to the designated neighbor and rejects unrelated routes.

D:

Configure an approved eBGP multihop arrangement with suitable TTL and reachable peer addresses at both ends. This action was designed for the separate EBGP multihop peering case, not the controlled acceptance rehearsal being assessed. The present observation is: A route is active locally but a new eBGP customer cannot see it because the intended route has no matching BGP export acceptance. Its governing mechanism is: BGP route advertisements are shaped by export routing policy and eligibility rather than the mere presence of a route in inet.0. The narrower applicable remedy is: Apply an export policy that permits precisely the required public prefix to the designated neighbor and rejects unrelated routes.

Question 538

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: On a shared broadcast LAN, a router configured with OSPF priority zero is expected to become designated router but never wins election. Which narrowly targeted action best resolves the demonstrated condition without introducing unrelated changes?

  1. Validate stub-area design and use the intended summary or default-route strategy rather than expecting type-5 LSAs in the stub.
  2. Set a nonzero eligible interface priority where DR candidacy is intended and re-evaluate election behavior with the network design.
  3. Correct the relevant OSPF interface costs in line with the approved traffic-engineering design and validate SPF selection.
  4. Coordinate compatible OSPFv2 authentication method, key identifier and active secret on both peers before cutover.

Explanation

Correct Answer

B:

Set a nonzero eligible interface priority where DR candidacy is intended and re-evaluate election behavior with the network design. In the controlled acceptance rehearsal, the reported evidence is: On a shared broadcast LAN, a router configured with OSPF priority zero is expected to become designated router but never wins election. The intervention follows the governing fact that OSPF priority zero makes a router ineligible to become designated or backup designated router on broadcast multiaccess links. Closure requires the corresponding specific confirmation: An appropriate eligible router becomes DR or BDR after a controlled election and neighbor adjacency remains stable.

Incorrect Answers

A:

Validate stub-area design and use the intended summary or default-route strategy rather than expecting type-5 LSAs in the stub. This action was designed for the separate Stub area external LSA expectation case, not the controlled acceptance rehearsal being assessed. The present observation is: On a shared broadcast LAN, a router configured with OSPF priority zero is expected to become designated router but never wins election. Its governing mechanism is: OSPF priority zero makes a router ineligible to become designated or backup designated router on broadcast multiaccess links. The narrower applicable remedy is: Set a nonzero eligible interface priority where DR candidacy is intended and re-evaluate election behavior with the network design.

C:

Correct the relevant OSPF interface costs in line with the approved traffic-engineering design and validate SPF selection. This action was designed for the separate OSPF metric path preference case, not the controlled acceptance rehearsal being assessed. The present observation is: On a shared broadcast LAN, a router configured with OSPF priority zero is expected to become designated router but never wins election. Its governing mechanism is: OSPF priority zero makes a router ineligible to become designated or backup designated router on broadcast multiaccess links. The narrower applicable remedy is: Set a nonzero eligible interface priority where DR candidacy is intended and re-evaluate election behavior with the network design.

D:

Coordinate compatible OSPFv2 authentication method, key identifier and active secret on both peers before cutover. This action was designed for the separate OSPF authentication key mismatch case, not the controlled acceptance rehearsal being assessed. The present observation is: On a shared broadcast LAN, a router configured with OSPF priority zero is expected to become designated router but never wins election. Its governing mechanism is: OSPF priority zero makes a router ineligible to become designated or backup designated router on broadcast multiaccess links. The narrower applicable remedy is: Set a nonzero eligible interface priority where DR candidacy is intended and re-evaluate election behavior with the network design.

Question 539

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: One peer permits only Level 1 and the other only Level 2 on a link, so neither forms an IS-IS adjacency despite reachable Ethernet. Which narrowly targeted action best resolves the demonstrated condition without introducing unrelated changes?

  1. Set and validate appropriate DIS priority on the LAN participant interfaces, then observe a controlled election.
  2. Configure a common allowed IS-IS level on the two interfaces in accordance with the area and backbone design.
  3. Investigate LSP flooding and neighbor stability, repairing the actual control-plane loss and refreshing current topology information.
  4. Allocate unique system identifiers in the NET on each router and refresh the affected IS-IS topology state.

Explanation

Correct Answer

B:

Configure a common allowed IS-IS level on the two interfaces in accordance with the area and backbone design. In the controlled acceptance rehearsal, the reported evidence is: One peer permits only Level 1 and the other only Level 2 on a link, so neither forms an IS-IS adjacency despite reachable Ethernet. The intervention follows the governing fact that An IS-IS adjacency needs compatible protocol levels as well as link reachability. Closure requires the corresponding specific confirmation: A shared Level 1 or Level 2 adjacency comes up and the right set of level-specific routes is exchanged.

Incorrect Answers

A:

Set and validate appropriate DIS priority on the LAN participant interfaces, then observe a controlled election. This action was designed for the separate IS-IS DIS election surprise case, not the controlled acceptance rehearsal being assessed. The present observation is: One peer permits only Level 1 and the other only Level 2 on a link, so neither forms an IS-IS adjacency despite reachable Ethernet. Its governing mechanism is: An IS-IS adjacency needs compatible protocol levels as well as link reachability. The narrower applicable remedy is: Configure a common allowed IS-IS level on the two interfaces in accordance with the area and backbone design.

C:

Investigate LSP flooding and neighbor stability, repairing the actual control-plane loss and refreshing current topology information. This action was designed for the separate IS-IS LSP lifetime anomaly case, not the controlled acceptance rehearsal being assessed. The present observation is: One peer permits only Level 1 and the other only Level 2 on a link, so neither forms an IS-IS adjacency despite reachable Ethernet. Its governing mechanism is: An IS-IS adjacency needs compatible protocol levels as well as link reachability. The narrower applicable remedy is: Configure a common allowed IS-IS level on the two interfaces in accordance with the area and backbone design.

D:

Allocate unique system identifiers in the NET on each router and refresh the affected IS-IS topology state. This action was designed for the separate Duplicate IS-IS system ID case, not the controlled acceptance rehearsal being assessed. The present observation is: One peer permits only Level 1 and the other only Level 2 on a link, so neither forms an IS-IS adjacency despite reachable Ethernet. Its governing mechanism is: An IS-IS adjacency needs compatible protocol levels as well as link reachability. The narrower applicable remedy is: Configure a common allowed IS-IS level on the two interfaces in accordance with the area and backbone design.

Question 540

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: An operations team expects a type-5 external route inside an OSPF stub area and reports the absence as an interface failure. Which narrowly targeted action best resolves the demonstrated condition without introducing unrelated changes?

  1. Investigate adjacency stability and LSA flooding, then restore consistent current link-state information before relying on SPF.
  2. Validate stub-area design and use the intended summary or default-route strategy rather than expecting type-5 LSAs in the stub.
  3. Coordinate compatible OSPFv2 authentication method, key identifier and active secret on both peers before cutover.
  4. Add a tightly scoped OSPF export policy for the intended prefix, preserving loop and source restrictions.

Explanation

Correct Answer

B:

Validate stub-area design and use the intended summary or default-route strategy rather than expecting type-5 LSAs in the stub. In the controlled acceptance rehearsal, the reported evidence is: An operations team expects a type-5 external route inside an OSPF stub area and reports the absence as an interface failure. The intervention follows the governing fact that OSPF stub areas intentionally restrict external LSAs and normally rely on appropriate default reachability from an ABR for external destinations. Closure requires the corresponding specific confirmation: Internal prefixes remain present, the designed default is learned, and external traffic follows that default without type-5 LSAs in the stub.

Incorrect Answers

A:

Investigate adjacency stability and LSA flooding, then restore consistent current link-state information before relying on SPF. This action was designed for the separate OSPF LSDB discrepancy case, not the controlled acceptance rehearsal being assessed. The present observation is: An operations team expects a type-5 external route inside an OSPF stub area and reports the absence as an interface failure. Its governing mechanism is: OSPF stub areas intentionally restrict external LSAs and normally rely on appropriate default reachability from an ABR for external destinations. The narrower applicable remedy is: Validate stub-area design and use the intended summary or default-route strategy rather than expecting type-5 LSAs in the stub.

C:

Coordinate compatible OSPFv2 authentication method, key identifier and active secret on both peers before cutover. This action was designed for the separate OSPF authentication key mismatch case, not the controlled acceptance rehearsal being assessed. The present observation is: An operations team expects a type-5 external route inside an OSPF stub area and reports the absence as an interface failure. Its governing mechanism is: OSPF stub areas intentionally restrict external LSAs and normally rely on appropriate default reachability from an ABR for external destinations. The narrower applicable remedy is: Validate stub-area design and use the intended summary or default-route strategy rather than expecting type-5 LSAs in the stub.

D:

Add a tightly scoped OSPF export policy for the intended prefix, preserving loop and source restrictions. This action was designed for the separate OSPF export policy omission case, not the controlled acceptance rehearsal being assessed. The present observation is: An operations team expects a type-5 external route inside an OSPF stub area and reports the absence as an interface failure. Its governing mechanism is: OSPF stub areas intentionally restrict external LSAs and normally rely on appropriate default reachability from an ABR for external destinations. The narrower applicable remedy is: Validate stub-area design and use the intended summary or default-route strategy rather than expecting type-5 LSAs in the stub.


Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests

Purchase Individually

JN0-364 Premium File

Premium File
JN0-364 Premium File
69 Q&A
$76.99$69.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.