Pass Your Juniper JN0-364 Exam Easy!

Juniper JN0-364 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

JN0-364 Premium VCE File

Juniper JN0-364 Premium File

69 Questions & Answers

Last Update: Oct 24, 2026

$69.99

JN0-364 Bundle gives you unlimited access to "JN0-364" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
JN0-364 Premium VCE File
Juniper JN0-364 Premium File

69 Questions & Answers

Last Update: Oct 24, 2026

$69.99

Juniper JN0-364 Exam Bundle gives you unlimited access to "JN0-364" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

Juniper JN0-364 Practice Test 55

Question 540

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: An operations team expects a type-5 external route inside an OSPF stub area and reports the absence as an interface failure. Which narrowly targeted action best resolves the demonstrated condition without introducing unrelated changes?

  1. Investigate adjacency stability and LSA flooding, then restore consistent current link-state information before relying on SPF.
  2. Validate stub-area design and use the intended summary or default-route strategy rather than expecting type-5 LSAs in the stub.
  3. Coordinate compatible OSPFv2 authentication method, key identifier and active secret on both peers before cutover.
  4. Add a tightly scoped OSPF export policy for the intended prefix, preserving loop and source restrictions.

Explanation

Correct Answer

B:

Validate stub-area design and use the intended summary or default-route strategy rather than expecting type-5 LSAs in the stub. In the controlled acceptance rehearsal, the reported evidence is: An operations team expects a type-5 external route inside an OSPF stub area and reports the absence as an interface failure. The intervention follows the governing fact that OSPF stub areas intentionally restrict external LSAs and normally rely on appropriate default reachability from an ABR for external destinations. Closure requires the corresponding specific confirmation: Internal prefixes remain present, the designed default is learned, and external traffic follows that default without type-5 LSAs in the stub.

Incorrect Answers

A:

Investigate adjacency stability and LSA flooding, then restore consistent current link-state information before relying on SPF. This action was designed for the separate OSPF LSDB discrepancy case, not the controlled acceptance rehearsal being assessed. The present observation is: An operations team expects a type-5 external route inside an OSPF stub area and reports the absence as an interface failure. Its governing mechanism is: OSPF stub areas intentionally restrict external LSAs and normally rely on appropriate default reachability from an ABR for external destinations. The narrower applicable remedy is: Validate stub-area design and use the intended summary or default-route strategy rather than expecting type-5 LSAs in the stub.

C:

Coordinate compatible OSPFv2 authentication method, key identifier and active secret on both peers before cutover. This action was designed for the separate OSPF authentication key mismatch case, not the controlled acceptance rehearsal being assessed. The present observation is: An operations team expects a type-5 external route inside an OSPF stub area and reports the absence as an interface failure. Its governing mechanism is: OSPF stub areas intentionally restrict external LSAs and normally rely on appropriate default reachability from an ABR for external destinations. The narrower applicable remedy is: Validate stub-area design and use the intended summary or default-route strategy rather than expecting type-5 LSAs in the stub.

D:

Add a tightly scoped OSPF export policy for the intended prefix, preserving loop and source restrictions. This action was designed for the separate OSPF export policy omission case, not the controlled acceptance rehearsal being assessed. The present observation is: An operations team expects a type-5 external route inside an OSPF stub area and reports the absence as an interface failure. Its governing mechanism is: OSPF stub areas intentionally restrict external LSAs and normally rely on appropriate default reachability from an ABR for external destinations. The narrower applicable remedy is: Validate stub-area design and use the intended summary or default-route strategy rather than expecting type-5 LSAs in the stub.

Question 541

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: An eBGP peering is established for inet unicast but the provider cannot receive approved IPv6 prefixes because the IPv6 address family is absent. Which narrowly targeted action best resolves the demonstrated condition without introducing unrelated changes?

  1. Permit required ICMPv6 Packet Too Big signaling and align encapsulation MTU with the supported end-to-end path.
  2. Specify the intended outgoing interface together with the link-local next hop and confirm the route is usable.
  3. Enable and validate OSPFv3 link participation and neighbor exchange using the intended IPv6 link-local connectivity.
  4. Enable and verify the BGP inet6 unicast family with permitted IPv6 export/import policy and resolvable next hops.

Explanation

Correct Answer

D:

Enable and verify the BGP inet6 unicast family with permitted IPv6 export/import policy and resolvable next hops. In the controlled acceptance rehearsal, the reported evidence is: An eBGP peering is established for inet unicast but the provider cannot receive approved IPv6 prefixes because the IPv6 address family is absent. The intervention follows the governing fact that BGP address families carry IPv6 routes separately from IPv4 unicast NLRI; an IPv4 session alone does not guarantee IPv6 exchange. Closure requires the corresponding specific confirmation: Approved IPv6 prefixes are received, installed and reachable with the correct inet6.0 next-hop resolution.

Incorrect Answers

A:

Permit required ICMPv6 Packet Too Big signaling and align encapsulation MTU with the supported end-to-end path. This action was designed for the separate ICMPv6 packet-too-big handling case, not the controlled acceptance rehearsal being assessed. The present observation is: An eBGP peering is established for inet unicast but the provider cannot receive approved IPv6 prefixes because the IPv6 address family is absent. Its governing mechanism is: BGP address families carry IPv6 routes separately from IPv4 unicast NLRI; an IPv4 session alone does not guarantee IPv6 exchange. The narrower applicable remedy is: Enable and verify the BGP inet6 unicast family with permitted IPv6 export/import policy and resolvable next hops.

B:

Specify the intended outgoing interface together with the link-local next hop and confirm the route is usable. This action was designed for the separate IPv6 static link-local next hop case, not the controlled acceptance rehearsal being assessed. The present observation is: An eBGP peering is established for inet unicast but the provider cannot receive approved IPv6 prefixes because the IPv6 address family is absent. Its governing mechanism is: BGP address families carry IPv6 routes separately from IPv4 unicast NLRI; an IPv4 session alone does not guarantee IPv6 exchange. The narrower applicable remedy is: Enable and verify the BGP inet6 unicast family with permitted IPv6 export/import policy and resolvable next hops.

C:

Enable and validate OSPFv3 link participation and neighbor exchange using the intended IPv6 link-local connectivity. This action was designed for the separate OSPFv3 neighbor uses link-local case, not the controlled acceptance rehearsal being assessed. The present observation is: An eBGP peering is established for inet unicast but the provider cannot receive approved IPv6 prefixes because the IPv6 address family is absent. Its governing mechanism is: BGP address families carry IPv6 routes separately from IPv4 unicast NLRI; an IPv4 session alone does not guarantee IPv6 exchange. The narrower applicable remedy is: Enable and verify the BGP inet6 unicast family with permitted IPv6 export/import policy and resolvable next hops.

Question 542

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: A labeled packet reaches a transit router, but its advertised incoming label has no valid forwarding action in the label forwarding table. Which narrowly targeted action best resolves the demonstrated condition without introducing unrelated changes?

  1. Reduce the justified bandwidth request or select a path with adequate RSVP-TE reservable bandwidth.
  2. Provision and verify a separate return LSP or alternate reverse forwarding mechanism consistent with the service design.
  3. Check the label binding and route resolution and restore the correct MPLS forwarding entry for that FEC.
  4. Use appropriate segment choices or a supported SR policy when explicit path steering is required, rather than treating a node SID as an exact-hop instruction.

Explanation

Correct Answer

C:

Check the label binding and route resolution and restore the correct MPLS forwarding entry for that FEC. In the controlled acceptance rehearsal, the reported evidence is: A labeled packet reaches a transit router, but its advertised incoming label has no valid forwarding action in the label forwarding table. The intervention follows the governing fact that MPLS forwarding depends on matching the incoming label against label-switching entries that specify swap, pop or forwarding actions. Closure requires the corresponding specific confirmation: A lookup for the affected incoming label shows the expected output label and interface, and an MPLS trace reaches the egress.

Incorrect Answers

A:

Reduce the justified bandwidth request or select a path with adequate RSVP-TE reservable bandwidth. This action was designed for the separate RSVP reservable bandwidth shortage case, not the controlled acceptance rehearsal being assessed. The present observation is: A labeled packet reaches a transit router, but its advertised incoming label has no valid forwarding action in the label forwarding table. Its governing mechanism is: MPLS forwarding depends on matching the incoming label against label-switching entries that specify swap, pop or forwarding actions. The narrower applicable remedy is: Check the label binding and route resolution and restore the correct MPLS forwarding entry for that FEC.

B:

Provision and verify a separate return LSP or alternate reverse forwarding mechanism consistent with the service design. This action was designed for the separate RSVP LSP directionality case, not the controlled acceptance rehearsal being assessed. The present observation is: A labeled packet reaches a transit router, but its advertised incoming label has no valid forwarding action in the label forwarding table. Its governing mechanism is: MPLS forwarding depends on matching the incoming label against label-switching entries that specify swap, pop or forwarding actions. The narrower applicable remedy is: Check the label binding and route resolution and restore the correct MPLS forwarding entry for that FEC.

D:

Use appropriate segment choices or a supported SR policy when explicit path steering is required, rather than treating a node SID as an exact-hop instruction. This action was designed for the separate SR-MPLS node-SID shortest path case, not the controlled acceptance rehearsal being assessed. The present observation is: A labeled packet reaches a transit router, but its advertised incoming label has no valid forwarding action in the label forwarding table. Its governing mechanism is: MPLS forwarding depends on matching the incoming label against label-switching entries that specify swap, pop or forwarding actions. The narrower applicable remedy is: Check the label binding and route resolution and restore the correct MPLS forwarding entry for that FEC.

Question 543

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: An RSVP traffic-engineered LSP cannot establish on a required path because its signaled explicit route includes an unavailable transit hop. Which narrowly targeted action best resolves the demonstrated condition without introducing unrelated changes?

  1. Correct the constrained explicit path or restore its required hop and rerun RSVP path signaling.
  2. Verify the intended PHP behavior and distinguish an implicit-null advertisement from an actual forwarding failure.
  3. Reduce the justified bandwidth request or select a path with adequate RSVP-TE reservable bandwidth.
  4. Permit and verify LDP TCP 646 between the approved transport endpoints while retaining other filter controls.

Explanation

Correct Answer

A:

Correct the constrained explicit path or restore its required hop and rerun RSVP path signaling. In the controlled acceptance rehearsal, the reported evidence is: An RSVP traffic-engineered LSP cannot establish on a required path because its signaled explicit route includes an unavailable transit hop. The intervention follows the governing fact that RSVP-TE can signal explicit constrained LSP paths; missing or disallowed hops prevent a viable PATH and RESV exchange. Closure requires the corresponding specific confirmation: The RSVP LSP becomes operational on the authorized explicit route and reports a complete signaled path.

Incorrect Answers

B:

Verify the intended PHP behavior and distinguish an implicit-null advertisement from an actual forwarding failure. This action was designed for the separate Penultimate hop popping case, not the controlled acceptance rehearsal being assessed. The present observation is: An RSVP traffic-engineered LSP cannot establish on a required path because its signaled explicit route includes an unavailable transit hop. Its governing mechanism is: RSVP-TE can signal explicit constrained LSP paths; missing or disallowed hops prevent a viable PATH and RESV exchange. The narrower applicable remedy is: Correct the constrained explicit path or restore its required hop and rerun RSVP path signaling.

C:

Reduce the justified bandwidth request or select a path with adequate RSVP-TE reservable bandwidth. This action was designed for the separate RSVP reservable bandwidth shortage case, not the controlled acceptance rehearsal being assessed. The present observation is: An RSVP traffic-engineered LSP cannot establish on a required path because its signaled explicit route includes an unavailable transit hop. Its governing mechanism is: RSVP-TE can signal explicit constrained LSP paths; missing or disallowed hops prevent a viable PATH and RESV exchange. The narrower applicable remedy is: Correct the constrained explicit path or restore its required hop and rerun RSVP path signaling.

D:

Permit and verify LDP TCP 646 between the approved transport endpoints while retaining other filter controls. This action was designed for the separate LDP TCP 646 establishment case, not the controlled acceptance rehearsal being assessed. The present observation is: An RSVP traffic-engineered LSP cannot establish on a required path because its signaled explicit route includes an unavailable transit hop. Its governing mechanism is: RSVP-TE can signal explicit constrained LSP paths; missing or disallowed hops prevent a viable PATH and RESV exchange. The narrower applicable remedy is: Correct the constrained explicit path or restore its required hop and rerun RSVP path signaling.

Question 544

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: PE-11 has a configured static route to 198.51.100.0/24, but the specified next hop 192.0.2.14 is not reachable by any active route, and traffic drops. Which narrowly targeted action best resolves the demonstrated condition without introducing unrelated changes?

  1. Apply a narrowly matched ingress firewall filter action that selects the intended forwarding routing instance and verify its routes.
  2. Tie backup-route validity to a suitable reachability detection mechanism and test route withdrawal during downstream failure.
  3. Restore an active route to the specified next-hop address or replace it with a verified reachable next hop before relying on the static route.
  4. Configure and test the intended RIB group or specific controlled route import into the appropriate secondary routing table.

Explanation

Correct Answer

C:

Restore an active route to the specified next-hop address or replace it with a verified reachable next hop before relying on the static route. In the controlled acceptance rehearsal, the reported evidence is: PE-11 has a configured static route to 198.51.100.0/24, but the specified next hop 192.0.2.14 is not reachable by any active route, and traffic drops. The intervention follows the governing fact that A Junos static route is usable for forwarding only when its configured next hop can be resolved through an active route or appropriate interface. Closure requires the corresponding specific confirmation: The static prefix becomes active with a resolved next hop, and a sourced packet test reaches the destination through the intended interface.

Incorrect Answers

A:

Apply a narrowly matched ingress firewall filter action that selects the intended forwarding routing instance and verify its routes. This action was designed for the separate Filter-based forwarding classification case, not the controlled acceptance rehearsal being assessed. The present observation is: PE-11 has a configured static route to 198.51.100.0/24, but the specified next hop 192.0.2.14 is not reachable by any active route, and traffic drops. Its governing mechanism is: A Junos static route is usable for forwarding only when its configured next hop can be resolved through an active route or appropriate interface. The narrower applicable remedy is: Restore an active route to the specified next-hop address or replace it with a verified reachable next hop before relying on the static route.

B:

Tie backup-route validity to a suitable reachability detection mechanism and test route withdrawal during downstream failure. This action was designed for the separate Static backup blackhole case, not the controlled acceptance rehearsal being assessed. The present observation is: PE-11 has a configured static route to 198.51.100.0/24, but the specified next hop 192.0.2.14 is not reachable by any active route, and traffic drops. Its governing mechanism is: A Junos static route is usable for forwarding only when its configured next hop can be resolved through an active route or appropriate interface. The narrower applicable remedy is: Restore an active route to the specified next-hop address or replace it with a verified reachable next hop before relying on the static route.

D:

Configure and test the intended RIB group or specific controlled route import into the appropriate secondary routing table. This action was designed for the separate RIB group forwarding copy case, not the controlled acceptance rehearsal being assessed. The present observation is: PE-11 has a configured static route to 198.51.100.0/24, but the specified next hop 192.0.2.14 is not reachable by any active route, and traffic drops. Its governing mechanism is: A Junos static route is usable for forwarding only when its configured next hop can be resolved through an active route or appropriate interface. The narrower applicable remedy is: Restore an active route to the specified next-hop address or replace it with a verified reachable next hop before relying on the static route.

Question 545

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: Small IPv6 pings succeed over a provider path but larger sessions stall because an intermediate filter blocks Packet Too Big messages needed by IPv6 Path MTU Discovery. Which narrowly targeted action best resolves the demonstrated condition without introducing unrelated changes?

  1. Configure a supported IPv6-over-IPv4 tunnel with reachable outer IPv4 endpoints and correct IPv6 routing into the tunnel.
  2. Specify the intended outgoing interface together with the link-local next hop and confirm the route is usable.
  3. Enable and verify the BGP inet6 unicast family with permitted IPv6 export/import policy and resolvable next hops.
  4. Permit required ICMPv6 Packet Too Big signaling and align encapsulation MTU with the supported end-to-end path.

Explanation

Correct Answer

D:

Permit required ICMPv6 Packet Too Big signaling and align encapsulation MTU with the supported end-to-end path. In the controlled acceptance rehearsal, the reported evidence is: Small IPv6 pings succeed over a provider path but larger sessions stall because an intermediate filter blocks Packet Too Big messages needed by IPv6 Path MTU Discovery. The intervention follows the governing fact that IPv6 routers do not fragment transit packets; working Path MTU Discovery relies on ICMPv6 errors when packets exceed a path MTU. Closure requires the corresponding specific confirmation: Large IPv6 application transfers succeed and Packet Too Big messages reach the source when necessary.

Incorrect Answers

A:

Configure a supported IPv6-over-IPv4 tunnel with reachable outer IPv4 endpoints and correct IPv6 routing into the tunnel. This action was designed for the separate IPv6 over IPv4 transit tunnel case, not the controlled acceptance rehearsal being assessed. The present observation is: Small IPv6 pings succeed over a provider path but larger sessions stall because an intermediate filter blocks Packet Too Big messages needed by IPv6 Path MTU Discovery. Its governing mechanism is: IPv6 routers do not fragment transit packets; working Path MTU Discovery relies on ICMPv6 errors when packets exceed a path MTU. The narrower applicable remedy is: Permit required ICMPv6 Packet Too Big signaling and align encapsulation MTU with the supported end-to-end path.

B:

Specify the intended outgoing interface together with the link-local next hop and confirm the route is usable. This action was designed for the separate IPv6 static link-local next hop case, not the controlled acceptance rehearsal being assessed. The present observation is: Small IPv6 pings succeed over a provider path but larger sessions stall because an intermediate filter blocks Packet Too Big messages needed by IPv6 Path MTU Discovery. Its governing mechanism is: IPv6 routers do not fragment transit packets; working Path MTU Discovery relies on ICMPv6 errors when packets exceed a path MTU. The narrower applicable remedy is: Permit required ICMPv6 Packet Too Big signaling and align encapsulation MTU with the supported end-to-end path.

C:

Enable and verify the BGP inet6 unicast family with permitted IPv6 export/import policy and resolvable next hops. This action was designed for the separate IPv6 BGP NLRI family omitted case, not the controlled acceptance rehearsal being assessed. The present observation is: Small IPv6 pings succeed over a provider path but larger sessions stall because an intermediate filter blocks Packet Too Big messages needed by IPv6 Path MTU Discovery. Its governing mechanism is: IPv6 routers do not fragment transit packets; working Path MTU Discovery relies on ICMPv6 errors when packets exceed a path MTU. The narrower applicable remedy is: Permit required ICMPv6 Packet Too Big signaling and align encapsulation MTU with the supported end-to-end path.

Question 546

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: A provider-facing Ethernet port must carry multiple distinct tagged logical units, but one unit uses the wrong VLAN encapsulation and traffic enters the wrong service. Which narrowly targeted action best resolves the demonstrated condition without introducing unrelated changes?

  1. Verify unknown-unicast flooding within the VLAN, then confirm MAC learning limits later traffic to the learned egress port.
  2. Find the physical or logical loop and correct the CE's redundant attachment or approved multihoming design.
  3. Align intended native VLAN handling on both ends or require explicit tagging according to the approved design.
  4. Correct the interface's supported VLAN tagging and logical-unit encapsulation so each service is matched to the intended tag.

Explanation

Correct Answer

D:

Correct the interface's supported VLAN tagging and logical-unit encapsulation so each service is matched to the intended tag. In the controlled acceptance rehearsal, the reported evidence is: A provider-facing Ethernet port must carry multiple distinct tagged logical units, but one unit uses the wrong VLAN encapsulation and traffic enters the wrong service. The intervention follows the governing fact that Junos logical-interface tag matching and encapsulation determine which tagged frames are classified into a particular service unit. Closure requires the corresponding specific confirmation: Per-unit counters and a packet capture demonstrate each authorized VLAN tag reaches its mapped logical interface.

Incorrect Answers

A:

Verify unknown-unicast flooding within the VLAN, then confirm MAC learning limits later traffic to the learned egress port. This action was designed for the separate Unknown unicast flooding behavior case, not the controlled acceptance rehearsal being assessed. The present observation is: A provider-facing Ethernet port must carry multiple distinct tagged logical units, but one unit uses the wrong VLAN encapsulation and traffic enters the wrong service. Its governing mechanism is: Junos logical-interface tag matching and encapsulation determine which tagged frames are classified into a particular service unit. The narrower applicable remedy is: Correct the interface's supported VLAN tagging and logical-unit encapsulation so each service is matched to the intended tag.

B:

Find the physical or logical loop and correct the CE's redundant attachment or approved multihoming design. This action was designed for the separate MAC move instability case, not the controlled acceptance rehearsal being assessed. The present observation is: A provider-facing Ethernet port must carry multiple distinct tagged logical units, but one unit uses the wrong VLAN encapsulation and traffic enters the wrong service. Its governing mechanism is: Junos logical-interface tag matching and encapsulation determine which tagged frames are classified into a particular service unit. The narrower applicable remedy is: Correct the interface's supported VLAN tagging and logical-unit encapsulation so each service is matched to the intended tag.

C:

Align intended native VLAN handling on both ends or require explicit tagging according to the approved design. This action was designed for the separate Native VLAN mismatch case, not the controlled acceptance rehearsal being assessed. The present observation is: A provider-facing Ethernet port must carry multiple distinct tagged logical units, but one unit uses the wrong VLAN encapsulation and traffic enters the wrong service. Its governing mechanism is: Junos logical-interface tag matching and encapsulation determine which tagged frames are classified into a particular service unit. The narrower applicable remedy is: Correct the interface's supported VLAN tagging and logical-unit encapsulation so each service is matched to the intended tag.

Question 547

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: A blocking switch port abruptly stops receiving BPDUs after a one-way failure and risks moving into forwarding even though a redundant topology still exists. Which narrowly targeted action best resolves the demonstrated condition without introducing unrelated changes?

  1. Set a lower appropriate bridge priority for the approved root switch and validate the redundant root hierarchy.
  2. Validate RSTP root and alternate port roles and point-to-point link conditions before testing rapid alternate-port transition.
  3. Enable root protection on the designated administrative boundary port where superior BPDUs must not be accepted.
  4. Use loop protection where BPDU loss on non-designated ports could cause an unsafe transition, after verifying platform support.

Explanation

Correct Answer

D:

Use loop protection where BPDU loss on non-designated ports could cause an unsafe transition, after verifying platform support. In the controlled acceptance rehearsal, the reported evidence is: A blocking switch port abruptly stops receiving BPDUs after a one-way failure and risks moving into forwarding even though a redundant topology still exists. The intervention follows the governing fact that Loop protection guards against a blocked interface incorrectly forwarding when expected BPDUs vanish, distinct from blocking superior BPDUs with root protection. Closure requires the corresponding specific confirmation: The protected port remains safe during the simulated BPDU loss and returns to normal after signaling is restored.

Incorrect Answers

A:

Set a lower appropriate bridge priority for the approved root switch and validate the redundant root hierarchy. This action was designed for the separate Root bridge election priority case, not the controlled acceptance rehearsal being assessed. The present observation is: A blocking switch port abruptly stops receiving BPDUs after a one-way failure and risks moving into forwarding even though a redundant topology still exists. Its governing mechanism is: Loop protection guards against a blocked interface incorrectly forwarding when expected BPDUs vanish, distinct from blocking superior BPDUs with root protection. The narrower applicable remedy is: Use loop protection where BPDU loss on non-designated ports could cause an unsafe transition, after verifying platform support.

B:

Validate RSTP root and alternate port roles and point-to-point link conditions before testing rapid alternate-port transition. This action was designed for the separate RSTP alternate port activation case, not the controlled acceptance rehearsal being assessed. The present observation is: A blocking switch port abruptly stops receiving BPDUs after a one-way failure and risks moving into forwarding even though a redundant topology still exists. Its governing mechanism is: Loop protection guards against a blocked interface incorrectly forwarding when expected BPDUs vanish, distinct from blocking superior BPDUs with root protection. The narrower applicable remedy is: Use loop protection where BPDU loss on non-designated ports could cause an unsafe transition, after verifying platform support.

C:

Enable root protection on the designated administrative boundary port where superior BPDUs must not be accepted. This action was designed for the separate Root protection against rogue core case, not the controlled acceptance rehearsal being assessed. The present observation is: A blocking switch port abruptly stops receiving BPDUs after a one-way failure and risks moving into forwarding even though a redundant topology still exists. Its governing mechanism is: Loop protection guards against a blocked interface incorrectly forwarding when expected BPDUs vanish, distinct from blocking superior BPDUs with root protection. The narrower applicable remedy is: Use loop protection where BPDU loss on non-designated ports could cause an unsafe transition, after verifying platform support.

Question 548

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: A provider virtual-switch routing instance is configured but one interface remains attached to the default switching context, so tenant MAC learning is fragmented. Which narrowly targeted action best resolves the demonstrated condition without introducing unrelated changes?

  1. Move the intended logical interface into the correct virtual-switch instance and align its VLAN or bridge-domain membership.
  2. Verify unknown-unicast flooding within the VLAN, then confirm MAC learning limits later traffic to the learned egress port.
  3. Find the physical or logical loop and correct the CE's redundant attachment or approved multihoming design.
  4. Add only the authorized VLAN to the relevant tagged-trunk membership and verify tagging end to end.

Explanation

Correct Answer

A:

Move the intended logical interface into the correct virtual-switch instance and align its VLAN or bridge-domain membership. In the controlled acceptance rehearsal, the reported evidence is: A provider virtual-switch routing instance is configured but one interface remains attached to the default switching context, so tenant MAC learning is fragmented. The intervention follows the governing fact that Virtual switch instances maintain separate Layer 2 forwarding contexts; interface membership determines where MACs and VLANs are learned. Closure requires the corresponding specific confirmation: The customer MAC and VLAN appear in the correct virtual-switch instance with no leakage into default bridging context.

Incorrect Answers

B:

Verify unknown-unicast flooding within the VLAN, then confirm MAC learning limits later traffic to the learned egress port. This action was designed for the separate Unknown unicast flooding behavior case, not the controlled acceptance rehearsal being assessed. The present observation is: A provider virtual-switch routing instance is configured but one interface remains attached to the default switching context, so tenant MAC learning is fragmented. Its governing mechanism is: Virtual switch instances maintain separate Layer 2 forwarding contexts; interface membership determines where MACs and VLANs are learned. The narrower applicable remedy is: Move the intended logical interface into the correct virtual-switch instance and align its VLAN or bridge-domain membership.

C:

Find the physical or logical loop and correct the CE's redundant attachment or approved multihoming design. This action was designed for the separate MAC move instability case, not the controlled acceptance rehearsal being assessed. The present observation is: A provider virtual-switch routing instance is configured but one interface remains attached to the default switching context, so tenant MAC learning is fragmented. Its governing mechanism is: Virtual switch instances maintain separate Layer 2 forwarding contexts; interface membership determines where MACs and VLANs are learned. The narrower applicable remedy is: Move the intended logical interface into the correct virtual-switch instance and align its VLAN or bridge-domain membership.

D:

Add only the authorized VLAN to the relevant tagged-trunk membership and verify tagging end to end. This action was designed for the separate Trunk allowed VLAN omission case, not the controlled acceptance rehearsal being assessed. The present observation is: A provider virtual-switch routing instance is configured but one interface remains attached to the default switching context, so tenant MAC learning is fragmented. Its governing mechanism is: Virtual switch instances maintain separate Layer 2 forwarding contexts; interface membership determines where MACs and VLANs are learned. The narrower applicable remedy is: Move the intended logical interface into the correct virtual-switch instance and align its VLAN or bridge-domain membership.

Question 549

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: A redundant RE pair has GRES enabled but lacks stateful routing protocol synchronization, so an unplanned switchover causes avoidable routing churn. Which narrowly targeted action best resolves the demonstrated condition without introducing unrelated changes?

  1. Enable and verify supported Nonstop Active Routing with the necessary routing-state synchronization before a controlled switchover.
  2. Check VRRP virtual-address and group consistency, effective priority and owner/preemption conditions, then restore the intended priority policy.
  3. Tune supported preemption timing or tracking against actual upstream readiness so role recovery follows path health.
  4. Choose a supported BFD interval and detection multiplier appropriate for network scale and peer capacity, then test fault response.

Explanation

Correct Answer

A:

Enable and verify supported Nonstop Active Routing with the necessary routing-state synchronization before a controlled switchover. In the controlled acceptance rehearsal, the reported evidence is: A redundant RE pair has GRES enabled but lacks stateful routing protocol synchronization, so an unplanned switchover causes avoidable routing churn. The intervention follows the governing fact that NSR runs routing protocol state on the backup Routing Engine so failover can preserve adjacencies without depending on graceful-restart helpers. Closure requires the corresponding specific confirmation: The standby RE has synchronized routing state and peer sessions stay established through a tested RE switch.

Incorrect Answers

B:

Check VRRP virtual-address and group consistency, effective priority and owner/preemption conditions, then restore the intended priority policy. This action was designed for the separate VRRP master priority failover case, not the controlled acceptance rehearsal being assessed. The present observation is: A redundant RE pair has GRES enabled but lacks stateful routing protocol synchronization, so an unplanned switchover causes avoidable routing churn. Its governing mechanism is: NSR runs routing protocol state on the backup Routing Engine so failover can preserve adjacencies without depending on graceful-restart helpers. The narrower applicable remedy is: Enable and verify supported Nonstop Active Routing with the necessary routing-state synchronization before a controlled switchover.

C:

Tune supported preemption timing or tracking against actual upstream readiness so role recovery follows path health. This action was designed for the separate VRRP preemption oscillation case, not the controlled acceptance rehearsal being assessed. The present observation is: A redundant RE pair has GRES enabled but lacks stateful routing protocol synchronization, so an unplanned switchover causes avoidable routing churn. Its governing mechanism is: NSR runs routing protocol state on the backup Routing Engine so failover can preserve adjacencies without depending on graceful-restart helpers. The narrower applicable remedy is: Enable and verify supported Nonstop Active Routing with the necessary routing-state synchronization before a controlled switchover.

D:

Choose a supported BFD interval and detection multiplier appropriate for network scale and peer capacity, then test fault response. This action was designed for the separate BFD detect timer too aggressive case, not the controlled acceptance rehearsal being assessed. The present observation is: A redundant RE pair has GRES enabled but lacks stateful routing protocol synchronization, so an unplanned switchover causes avoidable routing churn. Its governing mechanism is: NSR runs routing protocol state on the backup Routing Engine so failover can preserve adjacencies without depending on graceful-restart helpers. The narrower applicable remedy is: Enable and verify supported Nonstop Active Routing with the necessary routing-state synchronization before a controlled switchover.

Question 550

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: A customer's MAC alternates rapidly between two provider ports after a redundant CE was cabled incorrectly, causing intermittent service loss. Which narrowly targeted action best resolves the demonstrated condition without introducing unrelated changes?

  1. Verify unknown-unicast flooding within the VLAN, then confirm MAC learning limits later traffic to the learned egress port.
  2. Find the physical or logical loop and correct the CE's redundant attachment or approved multihoming design.
  3. Move the intended logical interface into the correct virtual-switch instance and align its VLAN or bridge-domain membership.
  4. Add only the authorized VLAN to the relevant tagged-trunk membership and verify tagging end to end.

Explanation

Correct Answer

B:

Find the physical or logical loop and correct the CE's redundant attachment or approved multihoming design. In the controlled acceptance rehearsal, the reported evidence is: A customer's MAC alternates rapidly between two provider ports after a redundant CE was cabled incorrectly, causing intermittent service loss. The intervention follows the governing fact that Layer 2 learning continually updates a MAC address's egress port; uncontrolled MAC moves can indicate bridging loops or unstable attachments. Closure requires the corresponding specific confirmation: The MAC stabilizes on its expected port or approved redundancy construct and packet loss disappears.

Incorrect Answers

A:

Verify unknown-unicast flooding within the VLAN, then confirm MAC learning limits later traffic to the learned egress port. This action was designed for the separate Unknown unicast flooding behavior case, not the controlled acceptance rehearsal being assessed. The present observation is: A customer's MAC alternates rapidly between two provider ports after a redundant CE was cabled incorrectly, causing intermittent service loss. Its governing mechanism is: Layer 2 learning continually updates a MAC address's egress port; uncontrolled MAC moves can indicate bridging loops or unstable attachments. The narrower applicable remedy is: Find the physical or logical loop and correct the CE's redundant attachment or approved multihoming design.

C:

Move the intended logical interface into the correct virtual-switch instance and align its VLAN or bridge-domain membership. This action was designed for the separate Virtual switch instance membership case, not the controlled acceptance rehearsal being assessed. The present observation is: A customer's MAC alternates rapidly between two provider ports after a redundant CE was cabled incorrectly, causing intermittent service loss. Its governing mechanism is: Layer 2 learning continually updates a MAC address's egress port; uncontrolled MAC moves can indicate bridging loops or unstable attachments. The narrower applicable remedy is: Find the physical or logical loop and correct the CE's redundant attachment or approved multihoming design.

D:

Add only the authorized VLAN to the relevant tagged-trunk membership and verify tagging end to end. This action was designed for the separate Trunk allowed VLAN omission case, not the controlled acceptance rehearsal being assessed. The present observation is: A customer's MAC alternates rapidly between two provider ports after a redundant CE was cabled incorrectly, causing intermittent service loss. Its governing mechanism is: Layer 2 learning continually updates a MAC address's egress port; uncontrolled MAC moves can indicate bridging loops or unstable attachments. The narrower applicable remedy is: Find the physical or logical loop and correct the CE's redundant attachment or approved multihoming design.


Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests

Purchase Individually

JN0-364 Premium File

Premium File
JN0-364 Premium File
69 Q&A
$76.99$69.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.