Pass Your Juniper JN0-364 Exam Easy!

Juniper JN0-364 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

JN0-364 Premium VCE File

Juniper JN0-364 Premium File

69 Questions & Answers

Last Update: Oct 24, 2026

$69.99

JN0-364 Bundle gives you unlimited access to "JN0-364" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
JN0-364 Premium VCE File
Juniper JN0-364 Premium File

69 Questions & Answers

Last Update: Oct 24, 2026

$69.99

Juniper JN0-364 Exam Bundle gives you unlimited access to "JN0-364" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

Juniper JN0-364 Practice Test 91

Question 900

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: Hosts in a VLAN can bridge to each other but cannot reach a different subnet because the VLAN has no correctly attached integrated routing and bridging interface. An engineer suggests the shortcut: "Increase MAC learning timeout and assume routing between VLANs will start." Which critique explains the specific risk of that shortcut?

  1. Changing customer tags can disrupt their VLAN separation and leaves the provider's outer-tag contract unresolved.
  2. Sharing the outer service VLAN removes the intended customer isolation and can mix their traffic.
  3. MAC aging does not create a Layer 3 interface or provide inter-subnet forwarding.
  4. Removing MAC learning generally prolongs unknown-destination flooding rather than creating targeted forwarding.

Explanation

Correct Answer

C:

MAC aging does not create a Layer 3 interface or provide inter-subnet forwarding. In this controlled acceptance rehearsal the shortcut was explicitly proposed as: Increase MAC learning timeout and assume routing between VLANs will start. It fails to resolve the underlying problem that An IRB logical interface provides the routed gateway for a bridge domain, distinct from pure Layer 2 MAC switching. A sound alternative is the targeted engineering action: Configure and bind the intended IRB Layer 3 interface to the VLAN and verify IP forwarding and gateway addressing.

Incorrect Answers

A:

Changing customer tags can disrupt their VLAN separation and leaves the provider's outer-tag contract unresolved. That critique concerns a shortcut from the unrelated Q-in-Q outer tag mismatch case. The shortcut actually proposed in this controlled acceptance rehearsal is: Increase MAC learning timeout and assume routing between VLANs will start. It should be rejected for the narrower reason that MAC aging does not create a Layer 3 interface or provide inter-subnet forwarding. This distinction matters because An IRB logical interface provides the routed gateway for a bridge domain, distinct from pure Layer 2 MAC switching.

B:

Sharing the outer service VLAN removes the intended customer isolation and can mix their traffic. That critique concerns a shortcut from the unrelated Provider VLAN customer isolation case. The shortcut actually proposed in this controlled acceptance rehearsal is: Increase MAC learning timeout and assume routing between VLANs will start. It should be rejected for the narrower reason that MAC aging does not create a Layer 3 interface or provide inter-subnet forwarding. This distinction matters because An IRB logical interface provides the routed gateway for a bridge domain, distinct from pure Layer 2 MAC switching.

D:

Removing MAC learning generally prolongs unknown-destination flooding rather than creating targeted forwarding. That critique concerns a shortcut from the unrelated Unknown unicast flooding behavior case. The shortcut actually proposed in this controlled acceptance rehearsal is: Increase MAC learning timeout and assume routing between VLANs will start. It should be rejected for the narrower reason that MAC aging does not create a Layer 3 interface or provide inter-subnet forwarding. This distinction matters because An IRB logical interface provides the routed gateway for a bridge domain, distinct from pure Layer 2 MAC switching.

Question 901

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: A prefix is received from a valid BGP peer but remains unusable because the advertised BGP next hop has no resolving route in the local table. Which ongoing validation or operating control most directly prevents this specific failure from recurring?

  1. Monitor unresolved BGP next hops separately from session establishment.
  2. Review inbound prefix filtering and max-route thresholds with every peer change.
  3. Check BGP negotiated families and IPv6 route policy during dual-stack migrations.
  4. Record negotiated BGP timers and correlate flap events with packet-loss telemetry.

Explanation

Correct Answer

A:

Monitor unresolved BGP next hops separately from session establishment. The current controlled acceptance rehearsal demonstrates why this check matters: A prefix is received from a valid BGP peer but remains unusable because the advertised BGP next hop has no resolving route in the local table. It monitors the mechanism that BGP next-hop reachability is a prerequisite to making a received route eligible for active forwarding and path selection. The continuing safeguard should be correlated with the specific acceptance test: The received BGP route resolves its next hop, becomes eligible, and forwards over the designed path.

Incorrect Answers

B:

Review inbound prefix filtering and max-route thresholds with every peer change. This control addresses the distinct BGP import policy leak operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: A prefix is received from a valid BGP peer but remains unusable because the advertised BGP next hop has no resolving route in the local table. The directly relevant continuing check is: Monitor unresolved BGP next hops separately from session establishment. The governing mechanism is: BGP next-hop reachability is a prerequisite to making a received route eligible for active forwarding and path selection.

C:

Check BGP negotiated families and IPv6 route policy during dual-stack migrations. This control addresses the distinct BGP IPv6 family inactive operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: A prefix is received from a valid BGP peer but remains unusable because the advertised BGP next hop has no resolving route in the local table. The directly relevant continuing check is: Monitor unresolved BGP next hops separately from session establishment. The governing mechanism is: BGP next-hop reachability is a prerequisite to making a received route eligible for active forwarding and path selection.

D:

Record negotiated BGP timers and correlate flap events with packet-loss telemetry. This control addresses the distinct BGP peer flap from mismatched hold timers operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: A prefix is received from a valid BGP peer but remains unusable because the advertised BGP next hop has no resolving route in the local table. The directly relevant continuing check is: Monitor unresolved BGP next hops separately from session establishment. The governing mechanism is: BGP next-hop reachability is a prerequisite to making a received route eligible for active forwarding and path selection.

Question 902

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: An ingress router has routes to the LSP egress but its core-facing interface is not participating in MPLS, so label forwarding is absent. Which ongoing validation or operating control most directly prevents this specific failure from recurring?

  1. Track reserved and unreserved bandwidth on TE links before new LSP provisioning.
  2. Check MPLS interface participation during each core link turn-up.
  3. Rehearse RSVP protection paths during maintenance and monitor bypass readiness.
  4. Track intended one-way and reverse-path LSP inventories for bidirectional services.

Explanation

Correct Answer

B:

Check MPLS interface participation during each core link turn-up. The current controlled acceptance rehearsal demonstrates why this check matters: An ingress router has routes to the LSP egress but its core-facing interface is not participating in MPLS, so label forwarding is absent. It monitors the mechanism that MPLS label forwarding requires compatible MPLS participation on the forwarding interfaces along the intended label-switched path. The continuing safeguard should be correlated with the specific acceptance test: The core interface is MPLS enabled and labeled forwarding entries exist for the expected transport destination.

Incorrect Answers

A:

Track reserved and unreserved bandwidth on TE links before new LSP provisioning. This control addresses the distinct RSVP reservable bandwidth shortage operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: An ingress router has routes to the LSP egress but its core-facing interface is not participating in MPLS, so label forwarding is absent. The directly relevant continuing check is: Check MPLS interface participation during each core link turn-up. The governing mechanism is: MPLS label forwarding requires compatible MPLS participation on the forwarding interfaces along the intended label-switched path.

C:

Rehearse RSVP protection paths during maintenance and monitor bypass readiness. This control addresses the distinct RSVP link protection plan operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: An ingress router has routes to the LSP egress but its core-facing interface is not participating in MPLS, so label forwarding is absent. The directly relevant continuing check is: Check MPLS interface participation during each core link turn-up. The governing mechanism is: MPLS label forwarding requires compatible MPLS participation on the forwarding interfaces along the intended label-switched path.

D:

Track intended one-way and reverse-path LSP inventories for bidirectional services. This control addresses the distinct RSVP LSP directionality operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: An ingress router has routes to the LSP egress but its core-facing interface is not participating in MPLS, so label forwarding is absent. The directly relevant continuing check is: Check MPLS interface participation during each core link turn-up. The governing mechanism is: MPLS label forwarding requires compatible MPLS participation on the forwarding interfaces along the intended label-switched path.

Question 903

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: PE-11 has a configured static route to 198.51.100.0/24, but the specified next hop 192.0.2.14 is not reachable by any active route, and traffic drops. Which ongoing validation or operating control most directly prevents this specific failure from recurring?

  1. Check classifier counters, filter attachment and target-table availability after changes.
  2. Exercise backup-path liveness detection under downstream and local failure scenarios.
  3. Audit next-hop reachability and route-active state after every underlay change.
  4. Review import/export scope and route-copy audits when new routing instances are introduced.

Explanation

Correct Answer

C:

Audit next-hop reachability and route-active state after every underlay change. The current controlled acceptance rehearsal demonstrates why this check matters: PE-11 has a configured static route to 198.51.100.0/24, but the specified next hop 192.0.2.14 is not reachable by any active route, and traffic drops. It monitors the mechanism that A Junos static route is usable for forwarding only when its configured next hop can be resolved through an active route or appropriate interface. The continuing safeguard should be correlated with the specific acceptance test: The static prefix becomes active with a resolved next hop, and a sourced packet test reaches the destination through the intended interface.

Incorrect Answers

A:

Check classifier counters, filter attachment and target-table availability after changes. This control addresses the distinct Filter-based forwarding classification operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: PE-11 has a configured static route to 198.51.100.0/24, but the specified next hop 192.0.2.14 is not reachable by any active route, and traffic drops. The directly relevant continuing check is: Audit next-hop reachability and route-active state after every underlay change. The governing mechanism is: A Junos static route is usable for forwarding only when its configured next hop can be resolved through an active route or appropriate interface.

B:

Exercise backup-path liveness detection under downstream and local failure scenarios. This control addresses the distinct Static backup blackhole operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: PE-11 has a configured static route to 198.51.100.0/24, but the specified next hop 192.0.2.14 is not reachable by any active route, and traffic drops. The directly relevant continuing check is: Audit next-hop reachability and route-active state after every underlay change. The governing mechanism is: A Junos static route is usable for forwarding only when its configured next hop can be resolved through an active route or appropriate interface.

D:

Review import/export scope and route-copy audits when new routing instances are introduced. This control addresses the distinct RIB group forwarding copy operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: PE-11 has a configured static route to 198.51.100.0/24, but the specified next hop 192.0.2.14 is not reachable by any active route, and traffic drops. The directly relevant continuing check is: Audit next-hop reachability and route-active state after every underlay change. The governing mechanism is: A Junos static route is usable for forwarding only when its configured next hop can be resolved through an active route or appropriate interface.

Question 904

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: An engineer sees a route in the routing protocol database and assumes data packets must use it, but the route is hidden or inactive relative to an alternative. Which ongoing validation or operating control most directly prevents this specific failure from recurring?

  1. Compare RIB candidate routes with FIB entries in routing acceptance tests.
  2. Review route-preference conventions for static backups during routing-policy audits.
  3. Track ECMP next-hop count and routing-cost drift after transport changes.
  4. Review generated-route contributors and policy conditions whenever edge reachability changes.

Explanation

Correct Answer

A:

Compare RIB candidate routes with FIB entries in routing acceptance tests. The current controlled acceptance rehearsal demonstrates why this check matters: An engineer sees a route in the routing protocol database and assumes data packets must use it, but the route is hidden or inactive relative to an alternative. It monitors the mechanism that Junos can retain candidate and inactive routes in routing tables while forwarding uses only the selected active route installed in the forwarding information base. The continuing safeguard should be correlated with the specific acceptance test: The chosen route becomes active and the forwarding table points to its resolved next hop; an end-to-end trace follows that path.

Incorrect Answers

B:

Review route-preference conventions for static backups during routing-policy audits. This control addresses the distinct Administrative preference overrides static operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: An engineer sees a route in the routing protocol database and assumes data packets must use it, but the route is hidden or inactive relative to an alternative. The directly relevant continuing check is: Compare RIB candidate routes with FIB entries in routing acceptance tests. The governing mechanism is: Junos can retain candidate and inactive routes in routing tables while forwarding uses only the selected active route installed in the forwarding information base.

C:

Track ECMP next-hop count and routing-cost drift after transport changes. This control addresses the distinct Equal-cost multipath eligibility operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: An engineer sees a route in the routing protocol database and assumes data packets must use it, but the route is hidden or inactive relative to an alternative. The directly relevant continuing check is: Compare RIB candidate routes with FIB entries in routing acceptance tests. The governing mechanism is: Junos can retain candidate and inactive routes in routing tables while forwarding uses only the selected active route installed in the forwarding information base.

D:

Review generated-route contributors and policy conditions whenever edge reachability changes. This control addresses the distinct Generated default route prerequisite operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: An engineer sees a route in the routing protocol database and assumes data packets must use it, but the route is hidden or inactive relative to an alternative. The directly relevant continuing check is: Compare RIB candidate routes with FIB entries in routing acceptance tests. The governing mechanism is: Junos can retain candidate and inactive routes in routing tables while forwarding uses only the selected active route installed in the forwarding information base.

Question 905

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: Small IPv6 pings succeed over a provider path but larger sessions stall because an intermediate filter blocks Packet Too Big messages needed by IPv6 Path MTU Discovery. Which ongoing validation or operating control most directly prevents this specific failure from recurring?

  1. Exercise large-packet IPv6 and PMTU tests through tunneled or low-MTU paths.
  2. Test both outer IPv4 reachability and inner IPv6 routes during tunnel maintenance.
  3. Check IPv6 static routes for proper next-hop scope after link renumbering.
  4. Check BGP families, IPv6 route filters and next-hop resolution on each dual-stack peer.

Explanation

Correct Answer

A:

Exercise large-packet IPv6 and PMTU tests through tunneled or low-MTU paths. The current controlled acceptance rehearsal demonstrates why this check matters: Small IPv6 pings succeed over a provider path but larger sessions stall because an intermediate filter blocks Packet Too Big messages needed by IPv6 Path MTU Discovery. It monitors the mechanism that IPv6 routers do not fragment transit packets; working Path MTU Discovery relies on ICMPv6 errors when packets exceed a path MTU. The continuing safeguard should be correlated with the specific acceptance test: Large IPv6 application transfers succeed and Packet Too Big messages reach the source when necessary.

Incorrect Answers

B:

Test both outer IPv4 reachability and inner IPv6 routes during tunnel maintenance. This control addresses the distinct IPv6 over IPv4 transit tunnel operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: Small IPv6 pings succeed over a provider path but larger sessions stall because an intermediate filter blocks Packet Too Big messages needed by IPv6 Path MTU Discovery. The directly relevant continuing check is: Exercise large-packet IPv6 and PMTU tests through tunneled or low-MTU paths. The governing mechanism is: IPv6 routers do not fragment transit packets; working Path MTU Discovery relies on ICMPv6 errors when packets exceed a path MTU.

C:

Check IPv6 static routes for proper next-hop scope after link renumbering. This control addresses the distinct IPv6 static link-local next hop operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: Small IPv6 pings succeed over a provider path but larger sessions stall because an intermediate filter blocks Packet Too Big messages needed by IPv6 Path MTU Discovery. The directly relevant continuing check is: Exercise large-packet IPv6 and PMTU tests through tunneled or low-MTU paths. The governing mechanism is: IPv6 routers do not fragment transit packets; working Path MTU Discovery relies on ICMPv6 errors when packets exceed a path MTU.

D:

Check BGP families, IPv6 route filters and next-hop resolution on each dual-stack peer. This control addresses the distinct IPv6 BGP NLRI family omitted operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: Small IPv6 pings succeed over a provider path but larger sessions stall because an intermediate filter blocks Packet Too Big messages needed by IPv6 Path MTU Discovery. The directly relevant continuing check is: Exercise large-packet IPv6 and PMTU tests through tunneled or low-MTU paths. The governing mechanism is: IPv6 routers do not fragment transit packets; working Path MTU Discovery relies on ICMPv6 errors when packets exceed a path MTU.

Question 906

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: An operations team expects a type-5 external route inside an OSPF stub area and reports the absence as an interface failure. Which ongoing validation or operating control most directly prevents this specific failure from recurring?

  1. Alert on repeated OSPF adjacency resets and divergent LSA conditions.
  2. Rotate authenticated neighbor keys using synchronized maintenance and failure rollback checks.
  3. Document stub and normal area policies and validate expected LSA types.
  4. Audit external route export allowlists against approved customer prefixes.

Explanation

Correct Answer

C:

Document stub and normal area policies and validate expected LSA types. The current controlled acceptance rehearsal demonstrates why this check matters: An operations team expects a type-5 external route inside an OSPF stub area and reports the absence as an interface failure. It monitors the mechanism that OSPF stub areas intentionally restrict external LSAs and normally rely on appropriate default reachability from an ABR for external destinations. The continuing safeguard should be correlated with the specific acceptance test: Internal prefixes remain present, the designed default is learned, and external traffic follows that default without type-5 LSAs in the stub.

Incorrect Answers

A:

Alert on repeated OSPF adjacency resets and divergent LSA conditions. This control addresses the distinct OSPF LSDB discrepancy operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: An operations team expects a type-5 external route inside an OSPF stub area and reports the absence as an interface failure. The directly relevant continuing check is: Document stub and normal area policies and validate expected LSA types. The governing mechanism is: OSPF stub areas intentionally restrict external LSAs and normally rely on appropriate default reachability from an ABR for external destinations.

B:

Rotate authenticated neighbor keys using synchronized maintenance and failure rollback checks. This control addresses the distinct OSPF authentication key mismatch operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: An operations team expects a type-5 external route inside an OSPF stub area and reports the absence as an interface failure. The directly relevant continuing check is: Document stub and normal area policies and validate expected LSA types. The governing mechanism is: OSPF stub areas intentionally restrict external LSAs and normally rely on appropriate default reachability from an ABR for external destinations.

D:

Audit external route export allowlists against approved customer prefixes. This control addresses the distinct OSPF export policy omission operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: An operations team expects a type-5 external route inside an OSPF stub area and reports the absence as an interface failure. The directly relevant continuing check is: Document stub and normal area policies and validate expected LSA types. The governing mechanism is: OSPF stub areas intentionally restrict external LSAs and normally rely on appropriate default reachability from an ABR for external destinations.

Question 907

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: PE-13 is configured to advertise 203.0.113.0/22 as an aggregate, but no eligible more-specific contributing prefix is active and the summary is absent. Which ongoing validation or operating control most directly prevents this specific failure from recurring?

  1. Monitor aggregate active state and contributor counts before each upstream announcement change.
  2. Review first-match precedence with representative negative and positive traffic tests.
  3. Exercise backup-path liveness detection under downstream and local failure scenarios.
  4. Compare RIB candidate routes with FIB entries in routing acceptance tests.

Explanation

Correct Answer

A:

Monitor aggregate active state and contributor counts before each upstream announcement change. The current controlled acceptance rehearsal demonstrates why this check matters: PE-13 is configured to advertise 203.0.113.0/22 as an aggregate, but no eligible more-specific contributing prefix is active and the summary is absent. It monitors the mechanism that A Junos aggregate route is derived from contributing more-specific routes; an aggregate configured without a valid contributor may not become active. The continuing safeguard should be correlated with the specific acceptance test: The aggregate appears as an active route with contributing prefixes shown, and the permitted summary is advertised to the intended peer.

Incorrect Answers

B:

Review first-match precedence with representative negative and positive traffic tests. This control addresses the distinct Filter policy overmatch operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: PE-13 is configured to advertise 203.0.113.0/22 as an aggregate, but no eligible more-specific contributing prefix is active and the summary is absent. The directly relevant continuing check is: Monitor aggregate active state and contributor counts before each upstream announcement change. The governing mechanism is: A Junos aggregate route is derived from contributing more-specific routes; an aggregate configured without a valid contributor may not become active.

C:

Exercise backup-path liveness detection under downstream and local failure scenarios. This control addresses the distinct Static backup blackhole operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: PE-13 is configured to advertise 203.0.113.0/22 as an aggregate, but no eligible more-specific contributing prefix is active and the summary is absent. The directly relevant continuing check is: Monitor aggregate active state and contributor counts before each upstream announcement change. The governing mechanism is: A Junos aggregate route is derived from contributing more-specific routes; an aggregate configured without a valid contributor may not become active.

D:

Compare RIB candidate routes with FIB entries in routing acceptance tests. This control addresses the distinct Inactive route versus forwarding entry operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: PE-13 is configured to advertise 203.0.113.0/22 as an aggregate, but no eligible more-specific contributing prefix is active and the summary is absent. The directly relevant continuing check is: Monitor aggregate active state and contributor counts before each upstream announcement change. The governing mechanism is: A Junos aggregate route is derived from contributing more-specific routes; an aggregate configured without a valid contributor may not become active.

Question 908

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: Two cloned provider routers use the same IS-IS system identifier and generate conflicting LSP origins inside the link-state database. Which ongoing validation or operating control most directly prevents this specific failure from recurring?

  1. Maintain a registry of ISO NET system IDs across every area and lab clone.
  2. Alert on unusual LSP aging patterns and repeated adjacency churn.
  3. Audit IS-IS route advertisements against customer import and export inventories.
  4. Review link-level capability profiles for L1, L2 and L1/L2 routers.

Explanation

Correct Answer

A:

Maintain a registry of ISO NET system IDs across every area and lab clone. The current controlled acceptance rehearsal demonstrates why this check matters: Two cloned provider routers use the same IS-IS system identifier and generate conflicting LSP origins inside the link-state database. It monitors the mechanism that IS-IS relies on a unique system ID to identify LSP originators and topology nodes. The continuing safeguard should be correlated with the specific acceptance test: The nodes appear with distinct system IDs and no repeated conflicting LSP originator entries in the database.

Incorrect Answers

B:

Alert on unusual LSP aging patterns and repeated adjacency churn. This control addresses the distinct IS-IS LSP lifetime anomaly operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: Two cloned provider routers use the same IS-IS system identifier and generate conflicting LSP origins inside the link-state database. The directly relevant continuing check is: Maintain a registry of ISO NET system IDs across every area and lab clone. The governing mechanism is: IS-IS relies on a unique system ID to identify LSP originators and topology nodes.

C:

Audit IS-IS route advertisements against customer import and export inventories. This control addresses the distinct IS-IS route export scope operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: Two cloned provider routers use the same IS-IS system identifier and generate conflicting LSP origins inside the link-state database. The directly relevant continuing check is: Maintain a registry of ISO NET system IDs across every area and lab clone. The governing mechanism is: IS-IS relies on a unique system ID to identify LSP originators and topology nodes.

D:

Review link-level capability profiles for L1, L2 and L1/L2 routers. This control addresses the distinct IS-IS level capability mismatch operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: Two cloned provider routers use the same IS-IS system identifier and generate conflicting LSP origins inside the link-state database. The directly relevant continuing check is: Maintain a registry of ISO NET system IDs across every area and lab clone. The governing mechanism is: IS-IS relies on a unique system ID to identify LSP originators and topology nodes.

Question 909

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: A trace shows the penultimate router removing a transport label before handing a packet to the egress, and an engineer assumes the missing final label is a fault. Which ongoing validation or operating control most directly prevents this specific failure from recurring?

  1. Track reserved and unreserved bandwidth on TE links before new LSP provisioning.
  2. Document expected label stacks at ingress, transit and penultimate hop for key services.
  3. Rehearse RSVP protection paths during maintenance and monitor bypass readiness.
  4. Audit service FEC transport next hops after RSVP design changes.

Explanation

Correct Answer

B:

Document expected label stacks at ingress, transit and penultimate hop for key services. The current controlled acceptance rehearsal demonstrates why this check matters: A trace shows the penultimate router removing a transport label before handing a packet to the egress, and an engineer assumes the missing final label is a fault. It monitors the mechanism that Penultimate-hop popping removes the top transport label before the egress when implicit-null is advertised, reducing label-processing work. The continuing safeguard should be correlated with the specific acceptance test: The egress receives the expected payload context and end-to-end service passes despite the absence of a top transport label.

Incorrect Answers

A:

Track reserved and unreserved bandwidth on TE links before new LSP provisioning. This control addresses the distinct RSVP reservable bandwidth shortage operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: A trace shows the penultimate router removing a transport label before handing a packet to the egress, and an engineer assumes the missing final label is a fault. The directly relevant continuing check is: Document expected label stacks at ingress, transit and penultimate hop for key services. The governing mechanism is: Penultimate-hop popping removes the top transport label before the egress when implicit-null is advertised, reducing label-processing work.

C:

Rehearse RSVP protection paths during maintenance and monitor bypass readiness. This control addresses the distinct RSVP link protection plan operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: A trace shows the penultimate router removing a transport label before handing a packet to the egress, and an engineer assumes the missing final label is a fault. The directly relevant continuing check is: Document expected label stacks at ingress, transit and penultimate hop for key services. The governing mechanism is: Penultimate-hop popping removes the top transport label before the egress when implicit-null is advertised, reducing label-processing work.

D:

Audit service FEC transport next hops after RSVP design changes. This control addresses the distinct LDP tunneled over RSVP operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: A trace shows the penultimate router removing a transport label before handing a packet to the egress, and an engineer assumes the missing final label is a fault. The directly relevant continuing check is: Document expected label stacks at ingress, transit and penultimate hop for key services. The governing mechanism is: Penultimate-hop popping removes the top transport label before the egress when implicit-null is advertised, reducing label-processing work.

Question 910

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: Two IPv6-only customer islands must communicate across an IPv4 underlay, but no tunnel endpoints have been configured for their routed IPv6 traffic. Which ongoing validation or operating control most directly prevents this specific failure from recurring?

  1. Check BGP families, IPv6 route filters and next-hop resolution on each dual-stack peer.
  2. Test both outer IPv4 reachability and inner IPv6 routes during tunnel maintenance.
  3. Inspect both protocol levels' IPv6 TLV propagation during dual-stack deployments.
  4. Exercise large-packet IPv6 and PMTU tests through tunneled or low-MTU paths.

Explanation

Correct Answer

B:

Test both outer IPv4 reachability and inner IPv6 routes during tunnel maintenance. The current controlled acceptance rehearsal demonstrates why this check matters: Two IPv6-only customer islands must communicate across an IPv4 underlay, but no tunnel endpoints have been configured for their routed IPv6 traffic. It monitors the mechanism that An encapsulating tunnel can transport IPv6 payload packets over an IPv4 underlay when endpoint and route mapping are correct. The continuing safeguard should be correlated with the specific acceptance test: An IPv6 trace crosses the intended tunnel, while outer IPv4 packets reach the peer endpoints and encapsulation counters increment.

Incorrect Answers

A:

Check BGP families, IPv6 route filters and next-hop resolution on each dual-stack peer. This control addresses the distinct IPv6 BGP NLRI family omitted operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: Two IPv6-only customer islands must communicate across an IPv4 underlay, but no tunnel endpoints have been configured for their routed IPv6 traffic. The directly relevant continuing check is: Test both outer IPv4 reachability and inner IPv6 routes during tunnel maintenance. The governing mechanism is: An encapsulating tunnel can transport IPv6 payload packets over an IPv4 underlay when endpoint and route mapping are correct.

C:

Inspect both protocol levels' IPv6 TLV propagation during dual-stack deployments. This control addresses the distinct IS-IS IPv6 reachability TLVs operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: Two IPv6-only customer islands must communicate across an IPv4 underlay, but no tunnel endpoints have been configured for their routed IPv6 traffic. The directly relevant continuing check is: Test both outer IPv4 reachability and inner IPv6 routes during tunnel maintenance. The governing mechanism is: An encapsulating tunnel can transport IPv6 payload packets over an IPv4 underlay when endpoint and route mapping are correct.

D:

Exercise large-packet IPv6 and PMTU tests through tunneled or low-MTU paths. This control addresses the distinct ICMPv6 packet-too-big handling operational scenario rather than preventing recurrence of the controlled acceptance rehearsal. The observed problem here is: Two IPv6-only customer islands must communicate across an IPv4 underlay, but no tunnel endpoints have been configured for their routed IPv6 traffic. The directly relevant continuing check is: Test both outer IPv4 reachability and inner IPv6 routes during tunnel maintenance. The governing mechanism is: An encapsulating tunnel can transport IPv6 payload packets over an IPv4 underlay when endpoint and route mapping are correct.


Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests

Purchase Individually

JN0-364 Premium File

Premium File
JN0-364 Premium File
69 Q&A
$76.99$69.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.