Pass Your Juniper JN0-364 Exam Easy!

Juniper JN0-364 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

JN0-364 Premium VCE File

Juniper JN0-364 Premium File

69 Questions & Answers

Last Update: Oct 24, 2026

$69.99

JN0-364 Bundle gives you unlimited access to "JN0-364" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
JN0-364 Premium VCE File
Juniper JN0-364 Premium File

69 Questions & Answers

Last Update: Oct 24, 2026

$69.99

Juniper JN0-364 Exam Bundle gives you unlimited access to "JN0-364" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

Juniper JN0-364 Practice Test 70

Question 690

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: One peer permits only Level 1 and the other only Level 2 on a link, so neither forms an IS-IS adjacency despite reachable Ethernet. Which underlying Junos routing, switching, or protocol principle best explains this specific observation?

  1. An IS-IS adjacency needs compatible protocol levels as well as link reachability.
  2. The IS-IS DIS election on a broadcast segment considers interface priority and system ID, rather than OSPF-style DR and BDR design.
  3. IS-IS LSP sequence, remaining lifetime and flooding determine which topology information survives in the LSDB.
  4. IS-IS relies on a unique system ID to identify LSP originators and topology nodes.

Explanation

Correct Answer

A:

An IS-IS adjacency needs compatible protocol levels as well as link reachability. This principle directly explains the controlled acceptance rehearsal: One peer permits only Level 1 and the other only Level 2 on a link, so neither forms an IS-IS adjacency despite reachable Ethernet. The aligned engineering response is: Configure a common allowed IS-IS level on the two interfaces in accordance with the area and backbone design. The result should be established through: A shared Level 1 or Level 2 adjacency comes up and the right set of level-specific routes is exchanged.

Incorrect Answers

B:

The IS-IS DIS election on a broadcast segment considers interface priority and system ID, rather than OSPF-style DR and BDR design. That explanation applies to the different IS-IS DIS election surprise scenario rather than this controlled acceptance rehearsal. The current fault evidence is: One peer permits only Level 1 and the other only Level 2 on a link, so neither forms an IS-IS adjacency despite reachable Ethernet. The controlling mechanism is instead: An IS-IS adjacency needs compatible protocol levels as well as link reachability. The correct response would be: Configure a common allowed IS-IS level on the two interfaces in accordance with the area and backbone design.

C:

IS-IS LSP sequence, remaining lifetime and flooding determine which topology information survives in the LSDB. That explanation applies to the different IS-IS LSP lifetime anomaly scenario rather than this controlled acceptance rehearsal. The current fault evidence is: One peer permits only Level 1 and the other only Level 2 on a link, so neither forms an IS-IS adjacency despite reachable Ethernet. The controlling mechanism is instead: An IS-IS adjacency needs compatible protocol levels as well as link reachability. The correct response would be: Configure a common allowed IS-IS level on the two interfaces in accordance with the area and backbone design.

D:

IS-IS relies on a unique system ID to identify LSP originators and topology nodes. That explanation applies to the different Duplicate IS-IS system ID scenario rather than this controlled acceptance rehearsal. The current fault evidence is: One peer permits only Level 1 and the other only Level 2 on a link, so neither forms an IS-IS adjacency despite reachable Ethernet. The controlling mechanism is instead: An IS-IS adjacency needs compatible protocol levels as well as link reachability. The correct response would be: Configure a common allowed IS-IS level on the two interfaces in accordance with the area and backbone design.

Question 691

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: An LDP session is operational, but a destination FEC lacks the usable outgoing label that an ingress PE expects to use. Which underlying Junos routing, switching, or protocol principle best explains this specific observation?

  1. RSVP-TE fast reroute can pre-establish bypass protection for a failure, reducing convergence delay when the main path is lost.
  2. A node SID typically steers toward its destination using shortest-path IGP forwarding, while explicit adjacency segments can add finer path constraints.
  3. LDP maps forwarding equivalence classes to labels learned from the downstream next hop; a session can be up without an applicable mapping for every FEC.
  4. Explicit-null can preserve an MPLS label header to the egress rather than relying on penultimate-hop implicit-null popping.

Explanation

Correct Answer

C:

LDP maps forwarding equivalence classes to labels learned from the downstream next hop; a session can be up without an applicable mapping for every FEC. This principle directly explains the controlled acceptance rehearsal: An LDP session is operational, but a destination FEC lacks the usable outgoing label that an ingress PE expects to use. The aligned engineering response is: Verify FEC route reachability, neighbor label advertisement and the label mapping installed for the specific destination. The result should be established through: The relevant FEC has a reachable next hop and valid incoming and outgoing label entries along the intended LSP.

Incorrect Answers

A:

RSVP-TE fast reroute can pre-establish bypass protection for a failure, reducing convergence delay when the main path is lost. That explanation applies to the different RSVP link protection plan scenario rather than this controlled acceptance rehearsal. The current fault evidence is: An LDP session is operational, but a destination FEC lacks the usable outgoing label that an ingress PE expects to use. The controlling mechanism is instead: LDP maps forwarding equivalence classes to labels learned from the downstream next hop; a session can be up without an applicable mapping for every FEC. The correct response would be: Verify FEC route reachability, neighbor label advertisement and the label mapping installed for the specific destination.

B:

A node SID typically steers toward its destination using shortest-path IGP forwarding, while explicit adjacency segments can add finer path constraints. That explanation applies to the different SR-MPLS node-SID shortest path scenario rather than this controlled acceptance rehearsal. The current fault evidence is: An LDP session is operational, but a destination FEC lacks the usable outgoing label that an ingress PE expects to use. The controlling mechanism is instead: LDP maps forwarding equivalence classes to labels learned from the downstream next hop; a session can be up without an applicable mapping for every FEC. The correct response would be: Verify FEC route reachability, neighbor label advertisement and the label mapping installed for the specific destination.

D:

Explicit-null can preserve an MPLS label header to the egress rather than relying on penultimate-hop implicit-null popping. That explanation applies to the different Explicit-null forwarding scenario rather than this controlled acceptance rehearsal. The current fault evidence is: An LDP session is operational, but a destination FEC lacks the usable outgoing label that an ingress PE expects to use. The controlling mechanism is instead: LDP maps forwarding equivalence classes to labels learned from the downstream next hop; a session can be up without an applicable mapping for every FEC. The correct response would be: Verify FEC route reachability, neighbor label advertisement and the label mapping installed for the specific destination.

Question 692

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: A provider selects an unexpected egress when local preferences are equal, because the chosen route has fewer AS hops than a manually favored alternative. Which underlying Junos routing, switching, or protocol principle best explains this specific observation?

  1. An eBGP session to a non-direct neighbor needs multihop transport allowances; directly connected assumptions do not work across intervening routers.
  2. BGP import policy controls which routes may enter the receiving route selection process, separate from the remote peer's export choice.
  3. When earlier selection criteria tie, BGP typically prefers a shorter AS path before later tie-breakers.
  4. BGP address-family configuration controls IPv6 route exchange independently of a healthy IPv4 unicast session.

Explanation

Correct Answer

C:

When earlier selection criteria tie, BGP typically prefers a shorter AS path before later tie-breakers. This principle directly explains the controlled acceptance rehearsal: A provider selects an unexpected egress when local preferences are equal, because the chosen route has fewer AS hops than a manually favored alternative. The aligned engineering response is: Compare AS paths after confirming earlier selection attributes and adjust only a justified routing policy if a different egress is required. The result should be established through: A route detail comparison shows the relevant AS-path difference and chosen path conforms to approved policy.

Incorrect Answers

A:

An eBGP session to a non-direct neighbor needs multihop transport allowances; directly connected assumptions do not work across intervening routers. That explanation applies to the different EBGP multihop peering scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A provider selects an unexpected egress when local preferences are equal, because the chosen route has fewer AS hops than a manually favored alternative. The controlling mechanism is instead: When earlier selection criteria tie, BGP typically prefers a shorter AS path before later tie-breakers. The correct response would be: Compare AS paths after confirming earlier selection attributes and adjust only a justified routing policy if a different egress is required.

B:

BGP import policy controls which routes may enter the receiving route selection process, separate from the remote peer's export choice. That explanation applies to the different BGP import policy leak scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A provider selects an unexpected egress when local preferences are equal, because the chosen route has fewer AS hops than a manually favored alternative. The controlling mechanism is instead: When earlier selection criteria tie, BGP typically prefers a shorter AS path before later tie-breakers. The correct response would be: Compare AS paths after confirming earlier selection attributes and adjust only a justified routing policy if a different egress is required.

D:

BGP address-family configuration controls IPv6 route exchange independently of a healthy IPv4 unicast session. That explanation applies to the different BGP IPv6 family inactive scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A provider selects an unexpected egress when local preferences are equal, because the chosen route has fewer AS hops than a manually favored alternative. The controlling mechanism is instead: When earlier selection criteria tie, BGP typically prefers a shorter AS path before later tie-breakers. The correct response would be: Compare AS paths after confirming earlier selection attributes and adjust only a justified routing policy if a different egress is required.

Question 693

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: Two routers share a VRRP virtual gateway but the lower-priority device stays primary contrary to design after a controlled handoff. Which underlying Junos routing, switching, or protocol principle best explains this specific observation?

  1. BFD uses rapid periodic control packets and negotiated timing; overly aggressive timers can mistake transient loss for peer failure.
  2. GRES preserves interface and kernel forwarding state across Routing Engine switchover but does not by itself preserve routing protocol sessions.
  3. NSR runs routing protocol state on the backup Routing Engine so failover can preserve adjacencies without depending on graceful-restart helpers.
  4. VRRP elects a primary virtual-router owner based on effective priority and protocol state, providing a shared first-hop gateway.

Explanation

Correct Answer

D:

VRRP elects a primary virtual-router owner based on effective priority and protocol state, providing a shared first-hop gateway. This principle directly explains the controlled acceptance rehearsal: Two routers share a VRRP virtual gateway but the lower-priority device stays primary contrary to design after a controlled handoff. The aligned engineering response is: Check VRRP virtual-address and group consistency, effective priority and owner/preemption conditions, then restore the intended priority policy. The result should be established through: The designated router is primary under normal conditions and the backup takes over promptly during an injected outage.

Incorrect Answers

A:

BFD uses rapid periodic control packets and negotiated timing; overly aggressive timers can mistake transient loss for peer failure. That explanation applies to the different BFD detect timer too aggressive scenario rather than this controlled acceptance rehearsal. The current fault evidence is: Two routers share a VRRP virtual gateway but the lower-priority device stays primary contrary to design after a controlled handoff. The controlling mechanism is instead: VRRP elects a primary virtual-router owner based on effective priority and protocol state, providing a shared first-hop gateway. The correct response would be: Check VRRP virtual-address and group consistency, effective priority and owner/preemption conditions, then restore the intended priority policy.

B:

GRES preserves interface and kernel forwarding state across Routing Engine switchover but does not by itself preserve routing protocol sessions. That explanation applies to the different GRES forwarding versus routing continuity scenario rather than this controlled acceptance rehearsal. The current fault evidence is: Two routers share a VRRP virtual gateway but the lower-priority device stays primary contrary to design after a controlled handoff. The controlling mechanism is instead: VRRP elects a primary virtual-router owner based on effective priority and protocol state, providing a shared first-hop gateway. The correct response would be: Check VRRP virtual-address and group consistency, effective priority and owner/preemption conditions, then restore the intended priority policy.

C:

NSR runs routing protocol state on the backup Routing Engine so failover can preserve adjacencies without depending on graceful-restart helpers. That explanation applies to the different NSR backup routing synchronization scenario rather than this controlled acceptance rehearsal. The current fault evidence is: Two routers share a VRRP virtual gateway but the lower-priority device stays primary contrary to design after a controlled handoff. The controlling mechanism is instead: VRRP elects a primary virtual-router owner based on effective priority and protocol state, providing a shared first-hop gateway. The correct response would be: Check VRRP virtual-address and group consistency, effective priority and owner/preemption conditions, then restore the intended priority policy.

Question 694

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: An IBGP session targets a remote loopback but the local router sources traffic from a physical interface not permitted by its peer, so the BGP connection fails. Which underlying Junos routing, switching, or protocol principle best explains this specific observation?

  1. BGP import policy controls which routes may enter the receiving route selection process, separate from the remote peer's export choice.
  2. When earlier selection criteria tie, BGP typically prefers a shorter AS path before later tie-breakers.
  3. BGP address-family configuration controls IPv6 route exchange independently of a healthy IPv4 unicast session.
  4. IBGP loopback peering depends on correct local address selection and recursive reachability to the configured peer endpoint.

Explanation

Correct Answer

D:

IBGP loopback peering depends on correct local address selection and recursive reachability to the configured peer endpoint. This principle directly explains the controlled acceptance rehearsal: An IBGP session targets a remote loopback but the local router sources traffic from a physical interface not permitted by its peer, so the BGP connection fails. The aligned engineering response is: Configure a consistent local BGP source address and ensure both loopbacks are reachable through the IGP or static routing design. The result should be established through: The session establishes using the intended loopback source and destination and stays up after a physical link fails.

Incorrect Answers

A:

BGP import policy controls which routes may enter the receiving route selection process, separate from the remote peer's export choice. That explanation applies to the different BGP import policy leak scenario rather than this controlled acceptance rehearsal. The current fault evidence is: An IBGP session targets a remote loopback but the local router sources traffic from a physical interface not permitted by its peer, so the BGP connection fails. The controlling mechanism is instead: IBGP loopback peering depends on correct local address selection and recursive reachability to the configured peer endpoint. The correct response would be: Configure a consistent local BGP source address and ensure both loopbacks are reachable through the IGP or static routing design.

B:

When earlier selection criteria tie, BGP typically prefers a shorter AS path before later tie-breakers. That explanation applies to the different BGP AS-path comparison scenario rather than this controlled acceptance rehearsal. The current fault evidence is: An IBGP session targets a remote loopback but the local router sources traffic from a physical interface not permitted by its peer, so the BGP connection fails. The controlling mechanism is instead: IBGP loopback peering depends on correct local address selection and recursive reachability to the configured peer endpoint. The correct response would be: Configure a consistent local BGP source address and ensure both loopbacks are reachable through the IGP or static routing design.

C:

BGP address-family configuration controls IPv6 route exchange independently of a healthy IPv4 unicast session. That explanation applies to the different BGP IPv6 family inactive scenario rather than this controlled acceptance rehearsal. The current fault evidence is: An IBGP session targets a remote loopback but the local router sources traffic from a physical interface not permitted by its peer, so the BGP connection fails. The controlling mechanism is instead: IBGP loopback peering depends on correct local address selection and recursive reachability to the configured peer endpoint. The correct response would be: Configure a consistent local BGP source address and ensure both loopbacks are reachable through the IGP or static routing design.

Question 695

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: IS-IS neighbors are up for IPv4, but IPv6 routes do not appear because the IPv6 reachability information is not advertised in supported IS-IS TLVs. Which underlying Junos routing, switching, or protocol principle best explains this specific observation?

  1. IS-IS uses suitable TLVs for IPv6 prefix reachability; a healthy IPv4 adjacency does not alone supply IPv6 routing information.
  2. An encapsulating tunnel can transport IPv6 payload packets over an IPv4 underlay when endpoint and route mapping are correct.
  3. IPv6 routers do not fragment transit packets; working Path MTU Discovery relies on ICMPv6 errors when packets exceed a path MTU.
  4. OSPFv3 supports IPv6 routing and uses link-local addresses for routine neighbor communication, separate from IPv4 OSPFv2.

Explanation

Correct Answer

A:

IS-IS uses suitable TLVs for IPv6 prefix reachability; a healthy IPv4 adjacency does not alone supply IPv6 routing information. This principle directly explains the controlled acceptance rehearsal: IS-IS neighbors are up for IPv4, but IPv6 routes do not appear because the IPv6 reachability information is not advertised in supported IS-IS TLVs. The aligned engineering response is: Enable the intended IS-IS IPv6 address-family or reachability support and validate the IPv6 prefixes in the IS-IS database. The result should be established through: The relevant IPv6 reachability TLVs are present and remote IPv6 prefixes become active in inet6.0.

Incorrect Answers

B:

An encapsulating tunnel can transport IPv6 payload packets over an IPv4 underlay when endpoint and route mapping are correct. That explanation applies to the different IPv6 over IPv4 transit tunnel scenario rather than this controlled acceptance rehearsal. The current fault evidence is: IS-IS neighbors are up for IPv4, but IPv6 routes do not appear because the IPv6 reachability information is not advertised in supported IS-IS TLVs. The controlling mechanism is instead: IS-IS uses suitable TLVs for IPv6 prefix reachability; a healthy IPv4 adjacency does not alone supply IPv6 routing information. The correct response would be: Enable the intended IS-IS IPv6 address-family or reachability support and validate the IPv6 prefixes in the IS-IS database.

C:

IPv6 routers do not fragment transit packets; working Path MTU Discovery relies on ICMPv6 errors when packets exceed a path MTU. That explanation applies to the different ICMPv6 packet-too-big handling scenario rather than this controlled acceptance rehearsal. The current fault evidence is: IS-IS neighbors are up for IPv4, but IPv6 routes do not appear because the IPv6 reachability information is not advertised in supported IS-IS TLVs. The controlling mechanism is instead: IS-IS uses suitable TLVs for IPv6 prefix reachability; a healthy IPv4 adjacency does not alone supply IPv6 routing information. The correct response would be: Enable the intended IS-IS IPv6 address-family or reachability support and validate the IPv6 prefixes in the IS-IS database.

D:

OSPFv3 supports IPv6 routing and uses link-local addresses for routine neighbor communication, separate from IPv4 OSPFv2. That explanation applies to the different OSPFv3 neighbor uses link-local scenario rather than this controlled acceptance rehearsal. The current fault evidence is: IS-IS neighbors are up for IPv4, but IPv6 routes do not appear because the IPv6 reachability information is not advertised in supported IS-IS TLVs. The controlling mechanism is instead: IS-IS uses suitable TLVs for IPv6 prefix reachability; a healthy IPv4 adjacency does not alone supply IPv6 routing information. The correct response would be: Enable the intended IS-IS IPv6 address-family or reachability support and validate the IPv6 prefixes in the IS-IS database.

Question 696

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: A trace shows the penultimate router removing a transport label before handing a packet to the egress, and an engineer assumes the missing final label is a fault. Which underlying Junos routing, switching, or protocol principle best explains this specific observation?

  1. RSVP-TE admission control uses available reservation capacity and signaled traffic-engineering constraints beyond simple route reachability.
  2. Penultimate-hop popping removes the top transport label before the egress when implicit-null is advertised, reducing label-processing work.
  3. RSVP-TE fast reroute can pre-establish bypass protection for a failure, reducing convergence delay when the main path is lost.
  4. LDP FEC transport can be carried over RSVP-established LSPs where explicitly configured, combining hop-by-hop label distribution with traffic-engineered transport.

Explanation

Correct Answer

B:

Penultimate-hop popping removes the top transport label before the egress when implicit-null is advertised, reducing label-processing work. This principle directly explains the controlled acceptance rehearsal: A trace shows the penultimate router removing a transport label before handing a packet to the egress, and an engineer assumes the missing final label is a fault. The aligned engineering response is: Verify the intended PHP behavior and distinguish an implicit-null advertisement from an actual forwarding failure. The result should be established through: The egress receives the expected payload context and end-to-end service passes despite the absence of a top transport label.

Incorrect Answers

A:

RSVP-TE admission control uses available reservation capacity and signaled traffic-engineering constraints beyond simple route reachability. That explanation applies to the different RSVP reservable bandwidth shortage scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A trace shows the penultimate router removing a transport label before handing a packet to the egress, and an engineer assumes the missing final label is a fault. The controlling mechanism is instead: Penultimate-hop popping removes the top transport label before the egress when implicit-null is advertised, reducing label-processing work. The correct response would be: Verify the intended PHP behavior and distinguish an implicit-null advertisement from an actual forwarding failure.

C:

RSVP-TE fast reroute can pre-establish bypass protection for a failure, reducing convergence delay when the main path is lost. That explanation applies to the different RSVP link protection plan scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A trace shows the penultimate router removing a transport label before handing a packet to the egress, and an engineer assumes the missing final label is a fault. The controlling mechanism is instead: Penultimate-hop popping removes the top transport label before the egress when implicit-null is advertised, reducing label-processing work. The correct response would be: Verify the intended PHP behavior and distinguish an implicit-null advertisement from an actual forwarding failure.

D:

LDP FEC transport can be carried over RSVP-established LSPs where explicitly configured, combining hop-by-hop label distribution with traffic-engineered transport. That explanation applies to the different LDP tunneled over RSVP scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A trace shows the penultimate router removing a transport label before handing a packet to the egress, and an engineer assumes the missing final label is a fault. The controlling mechanism is instead: Penultimate-hop popping removes the top transport label before the egress when implicit-null is advertised, reducing label-processing work. The correct response would be: Verify the intended PHP behavior and distinguish an implicit-null advertisement from an actual forwarding failure.

Question 697

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: An engineer sees a route in the routing protocol database and assumes data packets must use it, but the route is hidden or inactive relative to an alternative. Which underlying Junos routing, switching, or protocol principle best explains this specific observation?

  1. For equal prefixes in the Junos routing table, the lower routing preference is generally selected as active ahead of a route with higher preference.
  2. Junos can retain candidate and inactive routes in routing tables while forwarding uses only the selected active route installed in the forwarding information base.
  3. ECMP depends on eligible equal-cost forwarding choices, not merely matching physical-interface speeds.
  4. Generated routes depend on matching contributing routing information and generation policy, rather than merely being present in configuration text.

Explanation

Correct Answer

B:

Junos can retain candidate and inactive routes in routing tables while forwarding uses only the selected active route installed in the forwarding information base. This principle directly explains the controlled acceptance rehearsal: An engineer sees a route in the routing protocol database and assumes data packets must use it, but the route is hidden or inactive relative to an alternative. The aligned engineering response is: Inspect the active route and forwarding-table next hop, then resolve the preference, policy or next-hop condition suppressing the expected path. The result should be established through: The chosen route becomes active and the forwarding table points to its resolved next hop; an end-to-end trace follows that path.

Incorrect Answers

A:

For equal prefixes in the Junos routing table, the lower routing preference is generally selected as active ahead of a route with higher preference. That explanation applies to the different Administrative preference overrides static scenario rather than this controlled acceptance rehearsal. The current fault evidence is: An engineer sees a route in the routing protocol database and assumes data packets must use it, but the route is hidden or inactive relative to an alternative. The controlling mechanism is instead: Junos can retain candidate and inactive routes in routing tables while forwarding uses only the selected active route installed in the forwarding information base. The correct response would be: Inspect the active route and forwarding-table next hop, then resolve the preference, policy or next-hop condition suppressing the expected path.

C:

ECMP depends on eligible equal-cost forwarding choices, not merely matching physical-interface speeds. That explanation applies to the different Equal-cost multipath eligibility scenario rather than this controlled acceptance rehearsal. The current fault evidence is: An engineer sees a route in the routing protocol database and assumes data packets must use it, but the route is hidden or inactive relative to an alternative. The controlling mechanism is instead: Junos can retain candidate and inactive routes in routing tables while forwarding uses only the selected active route installed in the forwarding information base. The correct response would be: Inspect the active route and forwarding-table next hop, then resolve the preference, policy or next-hop condition suppressing the expected path.

D:

Generated routes depend on matching contributing routing information and generation policy, rather than merely being present in configuration text. That explanation applies to the different Generated default route prerequisite scenario rather than this controlled acceptance rehearsal. The current fault evidence is: An engineer sees a route in the routing protocol database and assumes data packets must use it, but the route is hidden or inactive relative to an alternative. The controlling mechanism is instead: Junos can retain candidate and inactive routes in routing tables while forwarding uses only the selected active route installed in the forwarding information base. The correct response would be: Inspect the active route and forwarding-table next hop, then resolve the preference, policy or next-hop condition suppressing the expected path.

Question 698

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: A provider-facing Ethernet port must carry multiple distinct tagged logical units, but one unit uses the wrong VLAN encapsulation and traffic enters the wrong service. Which underlying Junos routing, switching, or protocol principle best explains this specific observation?

  1. A bridge floods unknown unicast within the broadcast domain until it learns the destination MAC's location from source traffic.
  2. Junos logical-interface tag matching and encapsulation determine which tagged frames are classified into a particular service unit.
  3. Layer 2 learning continually updates a MAC address's egress port; uncontrolled MAC moves can indicate bridging loops or unstable attachments.
  4. Untagged ingress frames on a trunk are associated with the configured native VLAN; a mismatch creates inconsistent broadcast-domain mapping.

Explanation

Correct Answer

B:

Junos logical-interface tag matching and encapsulation determine which tagged frames are classified into a particular service unit. This principle directly explains the controlled acceptance rehearsal: A provider-facing Ethernet port must carry multiple distinct tagged logical units, but one unit uses the wrong VLAN encapsulation and traffic enters the wrong service. The aligned engineering response is: Correct the interface's supported VLAN tagging and logical-unit encapsulation so each service is matched to the intended tag. The result should be established through: Per-unit counters and a packet capture demonstrate each authorized VLAN tag reaches its mapped logical interface.

Incorrect Answers

A:

A bridge floods unknown unicast within the broadcast domain until it learns the destination MAC's location from source traffic. That explanation applies to the different Unknown unicast flooding behavior scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A provider-facing Ethernet port must carry multiple distinct tagged logical units, but one unit uses the wrong VLAN encapsulation and traffic enters the wrong service. The controlling mechanism is instead: Junos logical-interface tag matching and encapsulation determine which tagged frames are classified into a particular service unit. The correct response would be: Correct the interface's supported VLAN tagging and logical-unit encapsulation so each service is matched to the intended tag.

C:

Layer 2 learning continually updates a MAC address's egress port; uncontrolled MAC moves can indicate bridging loops or unstable attachments. That explanation applies to the different MAC move instability scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A provider-facing Ethernet port must carry multiple distinct tagged logical units, but one unit uses the wrong VLAN encapsulation and traffic enters the wrong service. The controlling mechanism is instead: Junos logical-interface tag matching and encapsulation determine which tagged frames are classified into a particular service unit. The correct response would be: Correct the interface's supported VLAN tagging and logical-unit encapsulation so each service is matched to the intended tag.

D:

Untagged ingress frames on a trunk are associated with the configured native VLAN; a mismatch creates inconsistent broadcast-domain mapping. That explanation applies to the different Native VLAN mismatch scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A provider-facing Ethernet port must carry multiple distinct tagged logical units, but one unit uses the wrong VLAN encapsulation and traffic enters the wrong service. The controlling mechanism is instead: Junos logical-interface tag matching and encapsulation determine which tagged frames are classified into a particular service unit. The correct response would be: Correct the interface's supported VLAN tagging and logical-unit encapsulation so each service is matched to the intended tag.

Question 699

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: Hosts in a VLAN can bridge to each other but cannot reach a different subnet because the VLAN has no correctly attached integrated routing and bridging interface. Which underlying Junos routing, switching, or protocol principle best explains this specific observation?

  1. Provider bridging adds an outer service tag so multiple customer VLANs can traverse a shared carrier domain while retaining their inner tags.
  2. Q-in-Q provider bridging uses an outer service identifier to isolate customers even when they reuse identical inner VLAN numbers.
  3. An IRB logical interface provides the routed gateway for a bridge domain, distinct from pure Layer 2 MAC switching.
  4. A bridge floods unknown unicast within the broadcast domain until it learns the destination MAC's location from source traffic.

Explanation

Correct Answer

C:

An IRB logical interface provides the routed gateway for a bridge domain, distinct from pure Layer 2 MAC switching. This principle directly explains the controlled acceptance rehearsal: Hosts in a VLAN can bridge to each other but cannot reach a different subnet because the VLAN has no correctly attached integrated routing and bridging interface. The aligned engineering response is: Configure and bind the intended IRB Layer 3 interface to the VLAN and verify IP forwarding and gateway addressing. The result should be established through: Hosts reach their VLAN gateway, the IRB interface appears active, and inter-VLAN traffic follows the intended security policy.

Incorrect Answers

A:

Provider bridging adds an outer service tag so multiple customer VLANs can traverse a shared carrier domain while retaining their inner tags. That explanation applies to the different Q-in-Q outer tag mismatch scenario rather than this controlled acceptance rehearsal. The current fault evidence is: Hosts in a VLAN can bridge to each other but cannot reach a different subnet because the VLAN has no correctly attached integrated routing and bridging interface. The controlling mechanism is instead: An IRB logical interface provides the routed gateway for a bridge domain, distinct from pure Layer 2 MAC switching. The correct response would be: Configure and bind the intended IRB Layer 3 interface to the VLAN and verify IP forwarding and gateway addressing.

B:

Q-in-Q provider bridging uses an outer service identifier to isolate customers even when they reuse identical inner VLAN numbers. That explanation applies to the different Provider VLAN customer isolation scenario rather than this controlled acceptance rehearsal. The current fault evidence is: Hosts in a VLAN can bridge to each other but cannot reach a different subnet because the VLAN has no correctly attached integrated routing and bridging interface. The controlling mechanism is instead: An IRB logical interface provides the routed gateway for a bridge domain, distinct from pure Layer 2 MAC switching. The correct response would be: Configure and bind the intended IRB Layer 3 interface to the VLAN and verify IP forwarding and gateway addressing.

D:

A bridge floods unknown unicast within the broadcast domain until it learns the destination MAC's location from source traffic. That explanation applies to the different Unknown unicast flooding behavior scenario rather than this controlled acceptance rehearsal. The current fault evidence is: Hosts in a VLAN can bridge to each other but cannot reach a different subnet because the VLAN has no correctly attached integrated routing and bridging interface. The controlling mechanism is instead: An IRB logical interface provides the routed gateway for a bridge domain, distinct from pure Layer 2 MAC switching. The correct response would be: Configure and bind the intended IRB Layer 3 interface to the VLAN and verify IP forwarding and gateway addressing.

Question 700

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: A GRE path passes small payloads but drops full-size traffic after an underlay MTU reduction because the new headers exceed available packet size. Which underlying Junos routing, switching, or protocol principle best explains this specific observation?

  1. GRE adds encapsulation overhead, so usable payload MTU can be smaller than the underlying link MTU.
  2. GRE encapsulates packets but does not inherently encrypt payloads or authenticate peers; security needs separate controls.
  3. GRE encapsulation uses configured outer source and destination IP addresses, which must align with the underlay endpoints of the intended tunnel.
  4. GRE is a stateless overlay requiring outer endpoint reachability and generally does not bring the interface down merely because a remote endpoint is unreachable.

Explanation

Correct Answer

A:

GRE adds encapsulation overhead, so usable payload MTU can be smaller than the underlying link MTU. This principle directly explains the controlled acceptance rehearsal: A GRE path passes small payloads but drops full-size traffic after an underlay MTU reduction because the new headers exceed available packet size. The aligned engineering response is: Correct tunnel MTU or MSS considerations and verify fragmentation or PMTU behavior for the specific supported platform. The result should be established through: Large application packets traverse the tunnel without blackholing, and measured payload size respects the underlay capacity.

Incorrect Answers

B:

GRE encapsulates packets but does not inherently encrypt payloads or authenticate peers; security needs separate controls. That explanation applies to the different GRE confidentiality misconception scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A GRE path passes small payloads but drops full-size traffic after an underlay MTU reduction because the new headers exceed available packet size. The controlling mechanism is instead: GRE adds encapsulation overhead, so usable payload MTU can be smaller than the underlying link MTU. The correct response would be: Correct tunnel MTU or MSS considerations and verify fragmentation or PMTU behavior for the specific supported platform.

C:

GRE encapsulation uses configured outer source and destination IP addresses, which must align with the underlay endpoints of the intended tunnel. That explanation applies to the different GRE tunnel endpoint mismatch scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A GRE path passes small payloads but drops full-size traffic after an underlay MTU reduction because the new headers exceed available packet size. The controlling mechanism is instead: GRE adds encapsulation overhead, so usable payload MTU can be smaller than the underlying link MTU. The correct response would be: Correct tunnel MTU or MSS considerations and verify fragmentation or PMTU behavior for the specific supported platform.

D:

GRE is a stateless overlay requiring outer endpoint reachability and generally does not bring the interface down merely because a remote endpoint is unreachable. That explanation applies to the different GRE underlay recursive loss scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A GRE path passes small payloads but drops full-size traffic after an underlay MTU reduction because the new headers exceed available packet size. The controlling mechanism is instead: GRE adds encapsulation overhead, so usable payload MTU can be smaller than the underlying link MTU. The correct response would be: Correct tunnel MTU or MSS considerations and verify fragmentation or PMTU behavior for the specific supported platform.


Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests

Purchase Individually

JN0-364 Premium File

Premium File
JN0-364 Premium File
69 Q&A
$76.99$69.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.