Pass Your Juniper JN0-364 Exam Easy!

Juniper JN0-364 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

JN0-364 Premium VCE File

Juniper JN0-364 Premium File

69 Questions & Answers

Last Update: Oct 24, 2026

$69.99

JN0-364 Bundle gives you unlimited access to "JN0-364" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
JN0-364 Premium VCE File
Juniper JN0-364 Premium File

69 Questions & Answers

Last Update: Oct 24, 2026

$69.99

Juniper JN0-364 Exam Bundle gives you unlimited access to "JN0-364" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

Juniper JN0-364 Practice Test 68

Question 670

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: After cloning a PE template, two routers use the same OSPF router ID and the topology shows conflicting advertisements. Which underlying Junos routing, switching, or protocol principle best explains this specific observation?

  1. OSPF chooses routes using accumulated link-state cost along the path; interface bandwidth alone does not guarantee the intended end-to-end metric.
  2. OSPF router IDs uniquely identify LSA originators and participating routers within the routing domain.
  3. OSPFv2 authenticated packet exchanges are rejected when the peer's configured key or authentication method does not agree.
  4. External routes are not necessarily redistributed into OSPF automatically; export policy determines which non-OSPF routes become OSPF external advertisements.

Explanation

Correct Answer

B:

OSPF router IDs uniquely identify LSA originators and participating routers within the routing domain. This principle directly explains the controlled acceptance rehearsal: After cloning a PE template, two routers use the same OSPF router ID and the topology shows conflicting advertisements. The aligned engineering response is: Assign and verify a unique stable OSPF router ID for each router, then refresh affected neighbor state. The result should be established through: The routers advertise distinct IDs, neighbors remain Full and the LSDB no longer shows conflicting origins.

Incorrect Answers

A:

OSPF chooses routes using accumulated link-state cost along the path; interface bandwidth alone does not guarantee the intended end-to-end metric. That explanation applies to the different OSPF metric path preference scenario rather than this controlled acceptance rehearsal. The current fault evidence is: After cloning a PE template, two routers use the same OSPF router ID and the topology shows conflicting advertisements. The controlling mechanism is instead: OSPF router IDs uniquely identify LSA originators and participating routers within the routing domain. The correct response would be: Assign and verify a unique stable OSPF router ID for each router, then refresh affected neighbor state.

C:

OSPFv2 authenticated packet exchanges are rejected when the peer's configured key or authentication method does not agree. That explanation applies to the different OSPF authentication key mismatch scenario rather than this controlled acceptance rehearsal. The current fault evidence is: After cloning a PE template, two routers use the same OSPF router ID and the topology shows conflicting advertisements. The controlling mechanism is instead: OSPF router IDs uniquely identify LSA originators and participating routers within the routing domain. The correct response would be: Assign and verify a unique stable OSPF router ID for each router, then refresh affected neighbor state.

D:

External routes are not necessarily redistributed into OSPF automatically; export policy determines which non-OSPF routes become OSPF external advertisements. That explanation applies to the different OSPF export policy omission scenario rather than this controlled acceptance rehearsal. The current fault evidence is: After cloning a PE template, two routers use the same OSPF router ID and the topology shows conflicting advertisements. The controlling mechanism is instead: OSPF router IDs uniquely identify LSA originators and participating routers within the routing domain. The correct response would be: Assign and verify a unique stable OSPF router ID for each router, then refresh affected neighbor state.

Question 671

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: An SR-MPLS headend expects node-SID traffic to follow the IGP shortest path, but an operator assumes a node SID can force an arbitrary link sequence without further segments. Which underlying Junos routing, switching, or protocol principle best explains this specific observation?

  1. Penultimate-hop popping removes the top transport label before the egress when implicit-null is advertised, reducing label-processing work.
  2. A node SID typically steers toward its destination using shortest-path IGP forwarding, while explicit adjacency segments can add finer path constraints.
  3. RSVP-TE admission control uses available reservation capacity and signaled traffic-engineering constraints beyond simple route reachability.
  4. RSVP-TE fast reroute can pre-establish bypass protection for a failure, reducing convergence delay when the main path is lost.

Explanation

Correct Answer

B:

A node SID typically steers toward its destination using shortest-path IGP forwarding, while explicit adjacency segments can add finer path constraints. This principle directly explains the controlled acceptance rehearsal: An SR-MPLS headend expects node-SID traffic to follow the IGP shortest path, but an operator assumes a node SID can force an arbitrary link sequence without further segments. The aligned engineering response is: Use appropriate segment choices or a supported SR policy when explicit path steering is required, rather than treating a node SID as an exact-hop instruction. The result should be established through: The observed label stack and forwarding path match the documented shortest path or the specified explicit segment list.

Incorrect Answers

A:

Penultimate-hop popping removes the top transport label before the egress when implicit-null is advertised, reducing label-processing work. That explanation applies to the different Penultimate hop popping scenario rather than this controlled acceptance rehearsal. The current fault evidence is: An SR-MPLS headend expects node-SID traffic to follow the IGP shortest path, but an operator assumes a node SID can force an arbitrary link sequence without further segments. The controlling mechanism is instead: A node SID typically steers toward its destination using shortest-path IGP forwarding, while explicit adjacency segments can add finer path constraints. The correct response would be: Use appropriate segment choices or a supported SR policy when explicit path steering is required, rather than treating a node SID as an exact-hop instruction.

C:

RSVP-TE admission control uses available reservation capacity and signaled traffic-engineering constraints beyond simple route reachability. That explanation applies to the different RSVP reservable bandwidth shortage scenario rather than this controlled acceptance rehearsal. The current fault evidence is: An SR-MPLS headend expects node-SID traffic to follow the IGP shortest path, but an operator assumes a node SID can force an arbitrary link sequence without further segments. The controlling mechanism is instead: A node SID typically steers toward its destination using shortest-path IGP forwarding, while explicit adjacency segments can add finer path constraints. The correct response would be: Use appropriate segment choices or a supported SR policy when explicit path steering is required, rather than treating a node SID as an exact-hop instruction.

D:

RSVP-TE fast reroute can pre-establish bypass protection for a failure, reducing convergence delay when the main path is lost. That explanation applies to the different RSVP link protection plan scenario rather than this controlled acceptance rehearsal. The current fault evidence is: An SR-MPLS headend expects node-SID traffic to follow the IGP shortest path, but an operator assumes a node SID can force an arbitrary link sequence without further segments. The controlling mechanism is instead: A node SID typically steers toward its destination using shortest-path IGP forwarding, while explicit adjacency segments can add finer path constraints. The correct response would be: Use appropriate segment choices or a supported SR policy when explicit path steering is required, rather than treating a node SID as an exact-hop instruction.

Question 672

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: A provider calls a GRE tunnel secure against eavesdropping merely because customers cannot see its inner packet headers on the underlay. Which underlying Junos routing, switching, or protocol principle best explains this specific observation?

  1. GRE adds encapsulation overhead, so usable payload MTU can be smaller than the underlying link MTU.
  2. GRE encapsulation uses configured outer source and destination IP addresses, which must align with the underlay endpoints of the intended tunnel.
  3. GRE encapsulates packets but does not inherently encrypt payloads or authenticate peers; security needs separate controls.
  4. GRE is a stateless overlay requiring outer endpoint reachability and generally does not bring the interface down merely because a remote endpoint is unreachable.

Explanation

Correct Answer

C:

GRE encapsulates packets but does not inherently encrypt payloads or authenticate peers; security needs separate controls. This principle directly explains the controlled acceptance rehearsal: A provider calls a GRE tunnel secure against eavesdropping merely because customers cannot see its inner packet headers on the underlay. The aligned engineering response is: Add an appropriate encryption mechanism such as supported IPsec where confidentiality is required, while treating GRE as encapsulation. The result should be established through: A validated encryption layer protects inner payload on the monitored underlay while GRE routing still functions as designed.

Incorrect Answers

A:

GRE adds encapsulation overhead, so usable payload MTU can be smaller than the underlying link MTU. That explanation applies to the different GRE encapsulation MTU overhead scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A provider calls a GRE tunnel secure against eavesdropping merely because customers cannot see its inner packet headers on the underlay. The controlling mechanism is instead: GRE encapsulates packets but does not inherently encrypt payloads or authenticate peers; security needs separate controls. The correct response would be: Add an appropriate encryption mechanism such as supported IPsec where confidentiality is required, while treating GRE as encapsulation.

B:

GRE encapsulation uses configured outer source and destination IP addresses, which must align with the underlay endpoints of the intended tunnel. That explanation applies to the different GRE tunnel endpoint mismatch scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A provider calls a GRE tunnel secure against eavesdropping merely because customers cannot see its inner packet headers on the underlay. The controlling mechanism is instead: GRE encapsulates packets but does not inherently encrypt payloads or authenticate peers; security needs separate controls. The correct response would be: Add an appropriate encryption mechanism such as supported IPsec where confidentiality is required, while treating GRE as encapsulation.

D:

GRE is a stateless overlay requiring outer endpoint reachability and generally does not bring the interface down merely because a remote endpoint is unreachable. That explanation applies to the different GRE underlay recursive loss scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A provider calls a GRE tunnel secure against eavesdropping merely because customers cannot see its inner packet headers on the underlay. The controlling mechanism is instead: GRE encapsulates packets but does not inherently encrypt payloads or authenticate peers; security needs separate controls. The correct response would be: Add an appropriate encryption mechanism such as supported IPsec where confidentiality is required, while treating GRE as encapsulation.

Question 673

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: A new RSVP LSP fails setup despite basic IP reachability because the configured requested bandwidth exceeds reservable capacity on a chosen link. Which underlying Junos routing, switching, or protocol principle best explains this specific observation?

  1. LDP maps forwarding equivalence classes to labels learned from the downstream next hop; a session can be up without an applicable mapping for every FEC.
  2. MPLS forwarding depends on matching the incoming label against label-switching entries that specify swap, pop or forwarding actions.
  3. RSVP-TE admission control uses available reservation capacity and signaled traffic-engineering constraints beyond simple route reachability.
  4. Penultimate-hop popping removes the top transport label before the egress when implicit-null is advertised, reducing label-processing work.

Explanation

Correct Answer

C:

RSVP-TE admission control uses available reservation capacity and signaled traffic-engineering constraints beyond simple route reachability. This principle directly explains the controlled acceptance rehearsal: A new RSVP LSP fails setup despite basic IP reachability because the configured requested bandwidth exceeds reservable capacity on a chosen link. The aligned engineering response is: Reduce the justified bandwidth request or select a path with adequate RSVP-TE reservable bandwidth. The result should be established through: The LSP reserves its intended bandwidth end to end without exceeding the engineered link limits.

Incorrect Answers

A:

LDP maps forwarding equivalence classes to labels learned from the downstream next hop; a session can be up without an applicable mapping for every FEC. That explanation applies to the different Missing LDP FEC label mapping scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A new RSVP LSP fails setup despite basic IP reachability because the configured requested bandwidth exceeds reservable capacity on a chosen link. The controlling mechanism is instead: RSVP-TE admission control uses available reservation capacity and signaled traffic-engineering constraints beyond simple route reachability. The correct response would be: Reduce the justified bandwidth request or select a path with adequate RSVP-TE reservable bandwidth.

B:

MPLS forwarding depends on matching the incoming label against label-switching entries that specify swap, pop or forwarding actions. That explanation applies to the different Incoming label missing in LFIB scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A new RSVP LSP fails setup despite basic IP reachability because the configured requested bandwidth exceeds reservable capacity on a chosen link. The controlling mechanism is instead: RSVP-TE admission control uses available reservation capacity and signaled traffic-engineering constraints beyond simple route reachability. The correct response would be: Reduce the justified bandwidth request or select a path with adequate RSVP-TE reservable bandwidth.

D:

Penultimate-hop popping removes the top transport label before the egress when implicit-null is advertised, reducing label-processing work. That explanation applies to the different Penultimate hop popping scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A new RSVP LSP fails setup despite basic IP reachability because the configured requested bandwidth exceeds reservable capacity on a chosen link. The controlling mechanism is instead: RSVP-TE admission control uses available reservation capacity and signaled traffic-engineering constraints beyond simple route reachability. The correct response would be: Reduce the justified bandwidth request or select a path with adequate RSVP-TE reservable bandwidth.

Question 674

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: A downstream tenant switch begins sending superior BPDUs toward the provider's designated port and threatens to become root for the provider spanning tree. Which underlying Junos routing, switching, or protocol principle best explains this specific observation?

  1. Edge ports assume they are connected to end stations; received BPDUs can signal an unexpected switch and trigger protective action.
  2. VSTP or suitable spanning-tree instances can apply VLAN-specific root and forwarding decisions, subject to platform limits.
  3. Root protection blocks a port that unexpectedly receives superior BPDUs and prevents it from becoming the root path.
  4. Loop protection guards against a blocked interface incorrectly forwarding when expected BPDUs vanish, distinct from blocking superior BPDUs with root protection.

Explanation

Correct Answer

C:

Root protection blocks a port that unexpectedly receives superior BPDUs and prevents it from becoming the root path. This principle directly explains the controlled acceptance rehearsal: A downstream tenant switch begins sending superior BPDUs toward the provider's designated port and threatens to become root for the provider spanning tree. The aligned engineering response is: Enable root protection on the designated administrative boundary port where superior BPDUs must not be accepted. The result should be established through: The port enters the documented root-prevented state for superior BPDUs and recovers when the rogue advertisement stops.

Incorrect Answers

A:

Edge ports assume they are connected to end stations; received BPDUs can signal an unexpected switch and trigger protective action. That explanation applies to the different Unexpected BPDU on edge port scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A downstream tenant switch begins sending superior BPDUs toward the provider's designated port and threatens to become root for the provider spanning tree. The controlling mechanism is instead: Root protection blocks a port that unexpectedly receives superior BPDUs and prevents it from becoming the root path. The correct response would be: Enable root protection on the designated administrative boundary port where superior BPDUs must not be accepted.

B:

VSTP or suitable spanning-tree instances can apply VLAN-specific root and forwarding decisions, subject to platform limits. That explanation applies to the different Per-VLAN spanning-tree path scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A downstream tenant switch begins sending superior BPDUs toward the provider's designated port and threatens to become root for the provider spanning tree. The controlling mechanism is instead: Root protection blocks a port that unexpectedly receives superior BPDUs and prevents it from becoming the root path. The correct response would be: Enable root protection on the designated administrative boundary port where superior BPDUs must not be accepted.

D:

Loop protection guards against a blocked interface incorrectly forwarding when expected BPDUs vanish, distinct from blocking superior BPDUs with root protection. That explanation applies to the different Loop protection after BPDU loss scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A downstream tenant switch begins sending superior BPDUs toward the provider's designated port and threatens to become root for the provider spanning tree. The controlling mechanism is instead: Root protection blocks a port that unexpectedly receives superior BPDUs and prevents it from becoming the root path. The correct response would be: Enable root protection on the designated administrative boundary port where superior BPDUs must not be accepted.

Question 675

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: An infrastructure route is present in inet.0 but absent from a secondary table whose applications depend on that route, and operators assume all tables automatically share entries. Which underlying Junos routing, switching, or protocol principle best explains this specific observation?

  1. A static next hop may appear link-reachable while the remote end-to-end path is unusable, so a tracking mechanism such as BFD can be necessary.
  2. Ordered firewall-filter terms apply the first matching action; overbroad early terms can shadow later selective forwarding rules.
  3. Separate Junos routing instances maintain distinct routing tables; cross-instance reachability requires an intentional route-leak mechanism and suitable policy.
  4. Routing instances and RIBs are isolated unless routes are explicitly installed or copied into other tables through supported mechanisms.

Explanation

Correct Answer

D:

Routing instances and RIBs are isolated unless routes are explicitly installed or copied into other tables through supported mechanisms. This principle directly explains the controlled acceptance rehearsal: An infrastructure route is present in inet.0 but absent from a secondary table whose applications depend on that route, and operators assume all tables automatically share entries. The aligned engineering response is: Configure and test the intended RIB group or specific controlled route import into the appropriate secondary routing table. The result should be established through: The intended route appears in both authorized tables with the right next hop, while unrelated routes are not leaked.

Incorrect Answers

A:

A static next hop may appear link-reachable while the remote end-to-end path is unusable, so a tracking mechanism such as BFD can be necessary. That explanation applies to the different Static backup blackhole scenario rather than this controlled acceptance rehearsal. The current fault evidence is: An infrastructure route is present in inet.0 but absent from a secondary table whose applications depend on that route, and operators assume all tables automatically share entries. The controlling mechanism is instead: Routing instances and RIBs are isolated unless routes are explicitly installed or copied into other tables through supported mechanisms. The correct response would be: Configure and test the intended RIB group or specific controlled route import into the appropriate secondary routing table.

B:

Ordered firewall-filter terms apply the first matching action; overbroad early terms can shadow later selective forwarding rules. That explanation applies to the different Filter policy overmatch scenario rather than this controlled acceptance rehearsal. The current fault evidence is: An infrastructure route is present in inet.0 but absent from a secondary table whose applications depend on that route, and operators assume all tables automatically share entries. The controlling mechanism is instead: Routing instances and RIBs are isolated unless routes are explicitly installed or copied into other tables through supported mechanisms. The correct response would be: Configure and test the intended RIB group or specific controlled route import into the appropriate secondary routing table.

C:

Separate Junos routing instances maintain distinct routing tables; cross-instance reachability requires an intentional route-leak mechanism and suitable policy. That explanation applies to the different Routing instance cross-leak scenario rather than this controlled acceptance rehearsal. The current fault evidence is: An infrastructure route is present in inet.0 but absent from a secondary table whose applications depend on that route, and operators assume all tables automatically share entries. The controlling mechanism is instead: Routing instances and RIBs are isolated unless routes are explicitly installed or copied into other tables through supported mechanisms. The correct response would be: Configure and test the intended RIB group or specific controlled route import into the appropriate secondary routing table.

Question 676

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: A customer CE is connected to an access port configured for VLAN 110, while its service should be VLAN 120, and its frames cannot reach the correct broadcast domain. Which underlying Junos routing, switching, or protocol principle best explains this specific observation?

  1. Virtual switch instances maintain separate Layer 2 forwarding contexts; interface membership determines where MACs and VLANs are learned.
  2. Layer 2 learning continually updates a MAC address's egress port; uncontrolled MAC moves can indicate bridging loops or unstable attachments.
  3. A trunk transports tagged VLANs only when both ends consistently permit and recognize the VLAN identifiers.
  4. An access port classifies untagged received frames into its configured VLAN, which determines Layer 2 forwarding membership.

Explanation

Correct Answer

D:

An access port classifies untagged received frames into its configured VLAN, which determines Layer 2 forwarding membership. This principle directly explains the controlled acceptance rehearsal: A customer CE is connected to an access port configured for VLAN 110, while its service should be VLAN 120, and its frames cannot reach the correct broadcast domain. The aligned engineering response is: Move the access port to the approved VLAN and verify logical interface membership and learning. The result should be established through: The CE MAC is learned in VLAN 120 and its frames reach a same-VLAN peer without leaking into VLAN 110.

Incorrect Answers

A:

Virtual switch instances maintain separate Layer 2 forwarding contexts; interface membership determines where MACs and VLANs are learned. That explanation applies to the different Virtual switch instance membership scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A customer CE is connected to an access port configured for VLAN 110, while its service should be VLAN 120, and its frames cannot reach the correct broadcast domain. The controlling mechanism is instead: An access port classifies untagged received frames into its configured VLAN, which determines Layer 2 forwarding membership. The correct response would be: Move the access port to the approved VLAN and verify logical interface membership and learning.

B:

Layer 2 learning continually updates a MAC address's egress port; uncontrolled MAC moves can indicate bridging loops or unstable attachments. That explanation applies to the different MAC move instability scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A customer CE is connected to an access port configured for VLAN 110, while its service should be VLAN 120, and its frames cannot reach the correct broadcast domain. The controlling mechanism is instead: An access port classifies untagged received frames into its configured VLAN, which determines Layer 2 forwarding membership. The correct response would be: Move the access port to the approved VLAN and verify logical interface membership and learning.

C:

A trunk transports tagged VLANs only when both ends consistently permit and recognize the VLAN identifiers. That explanation applies to the different Trunk allowed VLAN omission scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A customer CE is connected to an access port configured for VLAN 110, while its service should be VLAN 120, and its frames cannot reach the correct broadcast domain. The controlling mechanism is instead: An access port classifies untagged received frames into its configured VLAN, which determines Layer 2 forwarding membership. The correct response would be: Move the access port to the approved VLAN and verify logical interface membership and learning.

Question 677

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: After rotating an OSPFv2 authentication key on one side of a core link, Hellos fail to authenticate and the adjacency disappears. Which underlying Junos routing, switching, or protocol principle best explains this specific observation?

  1. OSPF point-to-point network types use one direct adjacency without broadcast-network DR and BDR election.
  2. OSPF database description negotiation checks interface compatibility; mismatched MTU can prevent the adjacency from progressing to Full.
  3. OSPFv2 authenticated packet exchanges are rejected when the peer's configured key or authentication method does not agree.
  4. Normal OSPF multi-area routing relies on backbone area 0 to connect nonbackbone areas through area border routers.

Explanation

Correct Answer

C:

OSPFv2 authenticated packet exchanges are rejected when the peer's configured key or authentication method does not agree. This principle directly explains the controlled acceptance rehearsal: After rotating an OSPFv2 authentication key on one side of a core link, Hellos fail to authenticate and the adjacency disappears. The aligned engineering response is: Coordinate compatible OSPFv2 authentication method, key identifier and active secret on both peers before cutover. The result should be established through: Authenticated OSPF packet exchange resumes, the neighbor reaches Full and no authentication failures remain in logs.

Incorrect Answers

A:

OSPF point-to-point network types use one direct adjacency without broadcast-network DR and BDR election. That explanation applies to the different Point-to-point OSPF network type scenario rather than this controlled acceptance rehearsal. The current fault evidence is: After rotating an OSPFv2 authentication key on one side of a core link, Hellos fail to authenticate and the adjacency disappears. The controlling mechanism is instead: OSPFv2 authenticated packet exchanges are rejected when the peer's configured key or authentication method does not agree. The correct response would be: Coordinate compatible OSPFv2 authentication method, key identifier and active secret on both peers before cutover.

B:

OSPF database description negotiation checks interface compatibility; mismatched MTU can prevent the adjacency from progressing to Full. That explanation applies to the different OSPF MTU ExStart stall scenario rather than this controlled acceptance rehearsal. The current fault evidence is: After rotating an OSPFv2 authentication key on one side of a core link, Hellos fail to authenticate and the adjacency disappears. The controlling mechanism is instead: OSPFv2 authenticated packet exchanges are rejected when the peer's configured key or authentication method does not agree. The correct response would be: Coordinate compatible OSPFv2 authentication method, key identifier and active secret on both peers before cutover.

D:

Normal OSPF multi-area routing relies on backbone area 0 to connect nonbackbone areas through area border routers. That explanation applies to the different OSPF backbone connectivity scenario rather than this controlled acceptance rehearsal. The current fault evidence is: After rotating an OSPFv2 authentication key on one side of a core link, Hellos fail to authenticate and the adjacency disappears. The controlling mechanism is instead: OSPFv2 authenticated packet exchanges are rejected when the peer's configured key or authentication method does not agree. The correct response would be: Coordinate compatible OSPFv2 authentication method, key identifier and active secret on both peers before cutover.

Question 678

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: An ingress router has routes to the LSP egress but its core-facing interface is not participating in MPLS, so label forwarding is absent. Which underlying Junos routing, switching, or protocol principle best explains this specific observation?

  1. RSVP-TE admission control uses available reservation capacity and signaled traffic-engineering constraints beyond simple route reachability.
  2. RSVP-TE fast reroute can pre-establish bypass protection for a failure, reducing convergence delay when the main path is lost.
  3. MPLS label forwarding requires compatible MPLS participation on the forwarding interfaces along the intended label-switched path.
  4. RSVP-TE LSPs are unidirectional; a forward LSP does not automatically constitute a return LSP.

Explanation

Correct Answer

C:

MPLS label forwarding requires compatible MPLS participation on the forwarding interfaces along the intended label-switched path. This principle directly explains the controlled acceptance rehearsal: An ingress router has routes to the LSP egress but its core-facing interface is not participating in MPLS, so label forwarding is absent. The aligned engineering response is: Enable MPLS on the intended eligible core-facing interface and verify forwarding capability along the path. The result should be established through: The core interface is MPLS enabled and labeled forwarding entries exist for the expected transport destination.

Incorrect Answers

A:

RSVP-TE admission control uses available reservation capacity and signaled traffic-engineering constraints beyond simple route reachability. That explanation applies to the different RSVP reservable bandwidth shortage scenario rather than this controlled acceptance rehearsal. The current fault evidence is: An ingress router has routes to the LSP egress but its core-facing interface is not participating in MPLS, so label forwarding is absent. The controlling mechanism is instead: MPLS label forwarding requires compatible MPLS participation on the forwarding interfaces along the intended label-switched path. The correct response would be: Enable MPLS on the intended eligible core-facing interface and verify forwarding capability along the path.

B:

RSVP-TE fast reroute can pre-establish bypass protection for a failure, reducing convergence delay when the main path is lost. That explanation applies to the different RSVP link protection plan scenario rather than this controlled acceptance rehearsal. The current fault evidence is: An ingress router has routes to the LSP egress but its core-facing interface is not participating in MPLS, so label forwarding is absent. The controlling mechanism is instead: MPLS label forwarding requires compatible MPLS participation on the forwarding interfaces along the intended label-switched path. The correct response would be: Enable MPLS on the intended eligible core-facing interface and verify forwarding capability along the path.

D:

RSVP-TE LSPs are unidirectional; a forward LSP does not automatically constitute a return LSP. That explanation applies to the different RSVP LSP directionality scenario rather than this controlled acceptance rehearsal. The current fault evidence is: An ingress router has routes to the LSP egress but its core-facing interface is not participating in MPLS, so label forwarding is absent. The controlling mechanism is instead: MPLS label forwarding requires compatible MPLS participation on the forwarding interfaces along the intended label-switched path. The correct response would be: Enable MPLS on the intended eligible core-facing interface and verify forwarding capability along the path.

Question 679

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: A remote BGP peer repeatedly closes sessions after sporadic delays, and operations incorrectly assume the configured hold timers on both routers must be identical even though negotiation occurs. Which underlying Junos routing, switching, or protocol principle best explains this specific observation?

  1. BGP MED comparison behavior depends on origin AS and configured selection policy; it is not a universal lowest-MED global ranking.
  2. BGP route advertisements are shaped by export routing policy and eligibility rather than the mere presence of a route in inet.0.
  3. BGP import policy controls which routes may enter the receiving route selection process, separate from the remote peer's export choice.
  4. BGP peers negotiate a hold time during OPEN exchange; a negotiated liveness timer expires when valid BGP messages are absent too long.

Explanation

Correct Answer

D:

BGP peers negotiate a hold time during OPEN exchange; a negotiated liveness timer expires when valid BGP messages are absent too long. This principle directly explains the controlled acceptance rehearsal: A remote BGP peer repeatedly closes sessions after sporadic delays, and operations incorrectly assume the configured hold timers on both routers must be identical even though negotiation occurs. The aligned engineering response is: Inspect negotiated hold time, keepalive behavior and actual packet loss before applying an agreed stable timer policy. The result should be established through: The negotiated hold time is visible and the session remains Established under representative transport jitter without spurious expiry.

Incorrect Answers

A:

BGP MED comparison behavior depends on origin AS and configured selection policy; it is not a universal lowest-MED global ranking. That explanation applies to the different BGP MED comparison scope scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A remote BGP peer repeatedly closes sessions after sporadic delays, and operations incorrectly assume the configured hold timers on both routers must be identical even though negotiation occurs. The controlling mechanism is instead: BGP peers negotiate a hold time during OPEN exchange; a negotiated liveness timer expires when valid BGP messages are absent too long. The correct response would be: Inspect negotiated hold time, keepalive behavior and actual packet loss before applying an agreed stable timer policy.

B:

BGP route advertisements are shaped by export routing policy and eligibility rather than the mere presence of a route in inet.0. That explanation applies to the different BGP export policy omission scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A remote BGP peer repeatedly closes sessions after sporadic delays, and operations incorrectly assume the configured hold timers on both routers must be identical even though negotiation occurs. The controlling mechanism is instead: BGP peers negotiate a hold time during OPEN exchange; a negotiated liveness timer expires when valid BGP messages are absent too long. The correct response would be: Inspect negotiated hold time, keepalive behavior and actual packet loss before applying an agreed stable timer policy.

C:

BGP import policy controls which routes may enter the receiving route selection process, separate from the remote peer's export choice. That explanation applies to the different BGP import policy leak scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A remote BGP peer repeatedly closes sessions after sporadic delays, and operations incorrectly assume the configured hold timers on both routers must be identical even though negotiation occurs. The controlling mechanism is instead: BGP peers negotiate a hold time during OPEN exchange; a negotiated liveness timer expires when valid BGP messages are absent too long. The correct response would be: Inspect negotiated hold time, keepalive behavior and actual packet loss before applying an agreed stable timer policy.

Question 680

During a controlled acceptance rehearsal of the same defect on a separate test network, engineers observe: A Junos static IPv6 route points to a link-local next-hop address but omits the outgoing interface, so the router cannot unambiguously resolve the path. Which underlying Junos routing, switching, or protocol principle best explains this specific observation?

  1. IPv6 routers do not fragment transit packets; working Path MTU Discovery relies on ICMPv6 errors when packets exceed a path MTU.
  2. BGP address families carry IPv6 routes separately from IPv4 unicast NLRI; an IPv4 session alone does not guarantee IPv6 exchange.
  3. OSPFv3 supports IPv6 routing and uses link-local addresses for routine neighbor communication, separate from IPv4 OSPFv2.
  4. An IPv6 link-local address is scoped to an interface; identifying the outgoing link is necessary to disambiguate a link-local next hop.

Explanation

Correct Answer

D:

An IPv6 link-local address is scoped to an interface; identifying the outgoing link is necessary to disambiguate a link-local next hop. This principle directly explains the controlled acceptance rehearsal: A Junos static IPv6 route points to a link-local next-hop address but omits the outgoing interface, so the router cannot unambiguously resolve the path. The aligned engineering response is: Specify the intended outgoing interface together with the link-local next hop and confirm the route is usable. The result should be established through: The IPv6 route is active in inet6.0 with the correct interface-scoped next hop and test traffic reaches the peer.

Incorrect Answers

A:

IPv6 routers do not fragment transit packets; working Path MTU Discovery relies on ICMPv6 errors when packets exceed a path MTU. That explanation applies to the different ICMPv6 packet-too-big handling scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A Junos static IPv6 route points to a link-local next-hop address but omits the outgoing interface, so the router cannot unambiguously resolve the path. The controlling mechanism is instead: An IPv6 link-local address is scoped to an interface; identifying the outgoing link is necessary to disambiguate a link-local next hop. The correct response would be: Specify the intended outgoing interface together with the link-local next hop and confirm the route is usable.

B:

BGP address families carry IPv6 routes separately from IPv4 unicast NLRI; an IPv4 session alone does not guarantee IPv6 exchange. That explanation applies to the different IPv6 BGP NLRI family omitted scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A Junos static IPv6 route points to a link-local next-hop address but omits the outgoing interface, so the router cannot unambiguously resolve the path. The controlling mechanism is instead: An IPv6 link-local address is scoped to an interface; identifying the outgoing link is necessary to disambiguate a link-local next hop. The correct response would be: Specify the intended outgoing interface together with the link-local next hop and confirm the route is usable.

C:

OSPFv3 supports IPv6 routing and uses link-local addresses for routine neighbor communication, separate from IPv4 OSPFv2. That explanation applies to the different OSPFv3 neighbor uses link-local scenario rather than this controlled acceptance rehearsal. The current fault evidence is: A Junos static IPv6 route points to a link-local next-hop address but omits the outgoing interface, so the router cannot unambiguously resolve the path. The controlling mechanism is instead: An IPv6 link-local address is scoped to an interface; identifying the outgoing link is necessary to disambiguate a link-local next hop. The correct response would be: Specify the intended outgoing interface together with the link-local next hop and confirm the route is usable.


Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests

Purchase Individually

JN0-364 Premium File

Premium File
JN0-364 Premium File
69 Q&A
$76.99$69.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.