|
||||||||||||
Home
Tutorials
Exam Formatter
Upload
FAQ
Contact
|
||||||||||||
|
Practice Exams:
Microsoft
Cisco
CompTIA
RedHat
Citrix
|
||||||||||||
|
HP
IBM
CheckPoint
CIW
LPI
Novell
VMware
CWNP
EXIN
Other
|
||||||||||||
|
||||||||||||
|
Thank you Bruce :)
Check answers because I scored a 792 and was getting high 900's on dumps.
THANK YOU BRUCE!!!!!!
Rest are from this VCE. But the sequence of options comes in changed order.
Thanks
3 new questions, rest were valid
I studied Bruce and Nobuhiro.
All questions from Bruce dump and only 1q from Nobuhiro (q57).
4 new questions.
Note - Q1 of Bruce's droplet appeared in my exam. The issue was that in the exam, I was required to select the answer out of the 10 sub-options (ie, Generic FIlters, Specific Filters, etc).
I was not allowed to select Quick Mode as my answer... Which is the answer supposedly from Bruce's dump.
And Bruce's dump didn't elaborate which of the suboption is the correct answer... So I most likely didn't get this correct.
Guys take note.
Server1 & Server 2
Server1 , Convert Active Directory Integrated
Modify the Address Class
Do you have any idea on my previous question regarding "the DNS replication traffic between Server1 and Server2 is encrypted" ?
Answer should B or C?
B. On Server1, convert the contoso.com zone to an Active Directory-integrated zone.
C. On each server, create connection security rules.
I don't think that modify start address would work here. 10.10.10.0/24 means that we already have whole 10.10.10.x range available (10.10.10.1-10.10.10.254). What can we modify it to? Any modification that would yield more addresses would require subnet mask to be changed...
verify DFS Namespace replicates between srv1 and srv2
Dump says answer is C DFSRdiag but I am seeing in other places that it should be B DFSdiag
Does anyone know which is correct?
On the test network, you implement a WSUS server named Server2. Server2 has the same WSUS
configuration as Server1.
You need to ensure that Server2 can distribute the same updates as Server1.
Answers in the dump are:
A. On Server2, run wsusutil.exe and specify the import parameter.
B. On Server1, run wsusutil.exe and specify the export parameter.
C. On Server2, restore the system state.
But it could be
A. On Server2, run wsusutil.exe and specify the import parameter.
B. On Server1, run wsusutil.exe and specify the export parameter.
E. Copy the WSUSContent folder from Server1 to Server2.
I think both of them should work. Which one is the right answer?
In technet both method are explained:
http://blogs.technet.com/b/sus/archive/2009/07/02/how-to-move-wsus-from-one-server-to-another.aspx
http://blogs.technet.com/b/smsandmom/archive/2007/12/05/wsus-moving-files-and-metadata-from-one-server-to-another.aspx
DHCP 98% Ans.. Extend the Scope or Reduce lease time or Decrease Cleanup Interval ..
Not Increase Cleanup Interval .. Correct Ans is Modify Address
Your network contains a server named DC1 that has the DHCP Server server role installed.
DC1 has a DHCP scope for the 10.10.10.0/24 network ID.
You discover the following warning message in the Event Iog on DC1: “Scope, Scope1, is 98 percent full with only two IP addresses remaining.”
You need to ensure that DC1 has enough IP addresses to assign to clients. The solution must not cause any IP conflicts.
What should you do?
A.
Restore the database from a backup.
B.
Configure name protection.
C.
Configure DHCP link layer-based filtering.
D.
Increase the database cleanup Interval.
E.
Configure a DHCP Relay Agent.
F.
Compact the database.
G.
Modify the start address.
H.
Reconcile the scope.
I think the answer is G --> "Modify the start address" but dump says D --> "Increase the database cleanup Interval"
Any help?
Your network contains an Active Directory domain named contoso.com. The domain contains two sites named Site1 and Site2. The servers for the sites are configured as shown in the following table.
Server1 hosts a standard primary zone for contoso.com. Server2 hosts a secondary zone for contoso.com. You need to ensure that all DNS replication traffic between Server1 and Server2 is encrypted.
What should you do?
A.
On Server1, configure DNSSEC for the contoso.com zone.
B.
On Server1, convert the contoso.com zone to an Active Directory-integrated zone.
C.
On each server, create connection security rules.
D.
On each server, enable Encrypting File System (EFS) encryption for the contoso.com.dns file.
I've read in some places answer is B but in others is C. Please I will need someone's help coz I'm doing this exam next monday.
Thanks to all for the comments!!
memories answers very well and you will pass 100%
i make categorized dump based on this dump and i will upload it, i hope it will help you
If you are close to achieving an MCITP on Windows Server 2008, we encourage you to complete your certification, and then you can take advantage of a shorter path to upgrade your certification to the MCSE: Server Infrastructure certification or the MCSE: Desktop Infrastructure certification. By achieving multiple certifications, you show continued dedication to learning new skills and you increase your value to your organization.
I am changing my answer to this question. I am going with C:
Run dnscmd.exe and specify the /resetlistenaddresses parameter
Reason: Even if we run dnscmd /config /EnableIPv6 1, as a start to the approach, it does not satisfy the question. If we leave it with just that, the dsn server will listen to both IPv4 and IPv6 addresses. The only way to satisfy the question is with /resetlistenaddresses
If you were to run dnscmd [ServerName] /resetlistenaddresses [ListenAddress] and list each individual IPv6 IP, then yes, I think it would only listen for IPv6 IPs. However, I think this is a bit of trick question because before you can do that, you have to run dnscmd /config /EnableIPv6 1 to enable the dns server the ability to listen to IPv6 IPs to start with as detailed here: http://technet.microsoft.com/en-us/library/cc783049%28WS.10%29.aspx
Syntax
dnscmd [ServerName] /resetlistenaddresses [ListenAddress]
Parameters
ListenAddress
Specifies an IP address on the DNS server that listens for DNS client requests. If no listen address is specified, then all IP addresses on the server listen for client requests.
Remarks
By default, all IP addresses on a DNS server listen for client DNS requests.
I Also thing that /resetlistenadress is required if DNS is to listen ONLY on one adress (in this case IPV6)
If this is the question about only resolving queries for IPv6 clients, I am picking answer B: Run dnscmd.exe and specify the /config parameter.
The full command would be:
dnscmd /config /EnableIPv6 1
I could be wrong, but my reasoning is that I don't know a command option that goes with /resetlistenaddresses that will listen to only IPv6 and disable all of IPv4. Instead it only lets you listen to specific IP address.
dnscmd ServerName /ResetListenAddresses [ListenAddress ...]
This is the GUI equivalent to going to the DNS console, selecting Properties, Interfaces, and then inputting specific IP addresses to listen to.
which one is right answer B or C
Taken from Technet Microsoft
Synchronize the WSUS Server
After you select products and update classifications, you are ready to synchronize WSUS. The synchronization process involves downloading updates from Microsoft Update or another WSUS server. WSUS determines if any new updates have been made available since the last time you synchronized. If this is the first time you are synchronizing the WSUS server, all of the updates are made available for approval.
http://technet.microsoft.com/en-us/library/cc708462%28v=ws.10%29.aspx
and thank you.
1. Modify Products and classification settings
2. Synchronize the WSUS server
3. Approve the updates.
Shouldn't synchronization be done first? If application is not listed, what good is it to Modify product and classification settings? Shouldn't WSUS be synchronized before everything else?
8~10 new questions(3 or 4 new exhibition questions), not in Bruce dump.
need prepaire new questions. it seems some questions are replaceded to new one.
Thank you all.
1-2 new questions. I've answerd all the qustions before my exam this morning. all 100%. but there is alot of answers wrong i think. First time failed.
Could you please contact me at my e: alcatraz2013.outlook.com
Next week I gonna take 70-648 exam. Thanks
Answer : C
Correct answer(s) D
which one is Right
answer A OR B which one is the right answer
thank you
http://www.flashcardexchange.com/cards/70-642-2321204
wich one its de correct?
http://technet.microsoft.com/en-us/library/ee649191(v=ws.10).aspx#BKMK_cmd
What do you guys think?
Client1 to use a different DNS server than the other client computers on the network.
What should you do?
Define a user class.
Orr
Define a user class.
Which command should you run on WKS1?
Route add -p 10.128.4.0/26 10.128.64.10
Or
Route add -p 10.128.4.0 mask 255.255.255.192 10.128.64.
You have an Active Directory-integrated DNS zone.
You install a Web server named Web1
Create an Alias (CNAME) resource
Or
Configure a GlobalNames zone and add a Host (A)
I studies this exam and rafaqats exam and went through CBT nugget videos.
There were around 3 new questions.
Note that i didn't get asked a single question involving ports.
which one is right A OR D
thanks
good luck From Tunisia
which is is right answer B OR C
thxxx
Correct answer is A OR B
thanks
Thanks Bruce and everyone that comments have helped me!!
From Sweden.
but Under the answers
answer : A
correct answer : B
Which is true !!!
but Under the answers
answer : A
correct answer : B
Which is true !!!
thank you Bruce!
God Bless!
which one is right answer please help me out
thankss
Passed Today April 29 .Score 861 maybe 4 or 5 new questions .
Thanks everybody for your feedback ,, good luck to us all .
what are correct answer A B C or A B E
thank you
what are correct answers please
thank you
which is correct A or B please let me know
thank you
B is not a correct choice since server name is web1, you don't need a CNAME record for this to access the url as http://web1. So teh correct answer is A.
Exam C Q19:
Your network contains an Active Directory forest. The forest contains three domain trees. Each domain tree
contains multiple domains.
You have an Active Directory-integrated DNS zone.
You install a Web server named Web1. All of the users in the company will use Web1. You need to ensure
that the users can access Web1 by using the URL http://web1. You want to achieve this goal by using the
minimum amount of administrative effort.
What should you do?
A. Configure a GlobalNames zone and add a Host (A) resource record for Web1.
B. Create an Alias (CNAME) resource record for Web1 in the forest root domain zone.
C. Create a reverse lookup zone and add an Alias (CNAME) resource record for Web1.
D. Create a Host Information (HINFO) resource record for Web1 in the forest root domain zone
Explanation says:
B should be correct also but answer chosen is A
CBT +Labs +Dumps = Pass
Thanks!
Exam D questions 4
which one is correct answer ,B Dfsdiag, or C Dfsrdiag
C: Dfsrdiag is right answer
which one is correct answer ,B Dfsdiag, or C Dfsrdiag
thankssss
Ensure Client Computer Successfully Install ?
1. From AD , Deploy Group Policy object or
2. From Client Computer GP
Which one is correct Answer
LDAP port 636, disk part...
netsh interface ip delete arpcache
The above command will flush the entire ARP cache on your system. Now as soon as network connections are made, the ARP cache will begin to repopulate.
-Denver subnetting > /20 or /19??
-clear routing cache, no 'Arp' as choice > 'route' or 'netsh'??
Thanks for the advices and answers
will you please let me know which question is this ;Got the denver site subnetting question
thank you for your feedback
Should be A,B,E
http://technet.microsoft.com/en-us/library/cc720512(v=ws.10).aspx
Step 2 of the article uses NTBackup to copy the WSUS content
Step 3 of the article covers exporting and then importing the metadata.
Either way, you cannot restore a system state you never backed up.
some questions where the same but had different answers, so be sure you know the subject matter.