Pass Your Cisco 640-722 Exam Easy!

This dumps are no more valid. PHYLLIS.228Q is valid i have given exam today and passed with 986.

What a disappointing experience for me, because this dump is NOT VALID so please nobody study anymore with the information on it... I failed miserably so I would wait till the new one comes out. I want my REVENGE!

This dumps are no more valid. all questions are changed. this exam was shocked for all question were new. failed :)

Passed today with 958 used Angel.162q.vce a couple of new question but not that hard if you read. I did the Exam in New Delhi, India

I bought the 228 Questions from pass4sure, there are 79 new questions, just the same with 640-722 exam , cause i fail this exam 15 April. good luck for every one

I passed with 820 today using Pass4Sure. Like everyone’s been saying, it’s a whole new test now. 75 Questions with no syms, D&Ds or interactive type questions. Lots of questions about 802.1x, Encryption methods, WCS/WLC, etc.

can anyone please share the 228 Q dump found in Pass4sure, actual test and others please .

actualtest have been added new 80 questions and these new questions are totaly valid i have faced with these questions in the exam. someone will add it 2-3 days to the examcollection just follow the website..

There is an update in Pass4Sure dated on Apr.22,2014. ;)

i need dump.
On April 19, I fell in this test.
score 400 of 1000.
help me. Latest dumps..............

There are no dump up to date right now.

i'm waiting for pass4sure's update to buy new one !

does anyone know who has the latest dump? It would have to be dated some time this month.

Hi all,

As this dumps are not valid anymore, anyone knows how much time would take to someone update to a new dumps? I was going to take the exam next week, any advice???
Thanks!!!

Hi,
As this dumps are not valid anymore, who could update the dumps? how much time would it take? I was going to take the exam next week, any advice???
Thanx!!!!

Just like ahmad said, exam is completely changed there is no even 1 question from all dumps, no lab/sims anymore. Not sure though if it's more easy as I failed the exam :)

I just take the test and none of the questions corresponds with these vce files. There is a new exam 640-722!! Good luck!!!

All questions has been changed. Exam is not valid.

Ham. Yes, all questions is changed...

edd......did all the questions change?

Does the exam changed or not?

exam is completely changed there is no even 1 question from all dumps. questions were more easy than dumps and there is no lab questions anymore.

Does anyone have the latest dump?

Does any have the new dump for this test?

This dump its no valid, the exam is changed....

Can anyone confirm if this dump is still valid and if this is still true to the test "They will simulate a senario, with a kind of Network Topology and they will make One or Two (thats what i got in my exams at least- one with Two quations and the other with only one quation). But they will have like a multiple chiose Answers where you will have to aswer according to the quations and given Senario. Thats all. you dont configure anything at all."

Hi, are there any Drag and Drop questions on the exam???
Thanks

passed the exam today. still valid! Thanks!

100% valid.
SSH and Telnet
config vlan management 0
Lab:
802.11b/g improperly configure (b data rates disable)
802.11n radio policy enabled only G
DHCP problem: round robin+static

Good Luck.

I passed the exam successfully. Every question came from this dump (no new questions at all).
I disagree with some answers of this dump and of course I got those questions in the real exam. :) I chose my answers.

The labs: all is mentioned in the comments basically but I have details for DHCP lab.
DHCP
Topology: WLC, switch, AP.
Configuration: WLC and switch have the same DHCP pool BUT different scope. On the switch the scope of the WLC was not allowed by the command dhcp excluded-address. So there was no overlapping.
On the WLC under menu WLANs\\advanced the DHCP Server override and DHCP Addr. Assignment were not checked. Which means the clients can use statically configured IP. Checked. Required two answers so check the second one.
The DHCP scope of the WLC is correctly configured and enabled! The manegement interface was assigned to the WLAN we troubleshooted. Under this interface the primary DHCP server was the WLC and the secondary was the default-gateway so the switch. I guess this would mean that only the WLC will assign IP addresses and there will not be load-sharing between the DHCP servers.
I couldn't find exact information in the Cisco docs whether it makes load-sharing (round-robin) or just use the primary till it is available/has free IP to assign.

Next lab:
Problem #1 old 2,4GhZ clients unable to connect (Note: did not say b clients) and problem #2: n clients can't use n high data rates.
"802.11b/g only" was set under the WLAN configuration. Under security tab WPA2 policy was checked with TKIP. All b data rates were disabled (12mbps was mandatory, below 12 all disabled, above 12 all supported.
The interesting thing was the answers of problem #1: there was no option "Wireless -> 802.11b/g/n -> 802.11b/g Global Parameters (or general settings)" where the b data rates were disabled instead the available option was "Wireless -> AP (!) -> 802.11b/g general settings" which path is incorrect I guess at least in WLC v7.4, therefore I chose the security problem (WPA2+TKIP) but not sure if this answer is correct (both might be a good answer).

Hint: You really have to know the menus/submenus in WLC. The screenshots show only the top menu, the submenus (on the left) are not visible.

Learn and practice before checking the dumps and taking the exam.
Good luck.

This dump is still valid. Passed today with 9xx score.

Dump still valid! Passwd today 989/1000.
Labs:
1) n & b/g clients access problems. Solution on comments
2) asking about items showed: emergencies, alerts, critical, errors
3) the one with dhcp option 43 hex vlan 20
4) roundrobin & static ip

Hi!
In WCS question: What are the main menu items in WCS7.0?
- Home is registered as a correct answer, but "Home" is a button (shortcut) not a menu, right? What do you think
- Service is registered as an incorrect answer, becuase the right one is "Services", right?

Thanks in advances for all your answers.

@Shaalan
Why A,B is the correct answer?
I think C,D is the best. (I sometimes: roundrobin fashion and static IP)

Dump still valid. passed today with 946.

This is still valid.

Lab 1. DHCP pool was configured on both WLC and Switch but the switch has a slightly wider range of IP on the same subnet. WLAN is configured to use DHCP of WLC (primary) and Switch (secondary). Question is why is the client getting the range from the pool of the switch?
Answer: The config of the WLC DHCP pool was incorrect. (it is disabled)

Lab 2. Interface group was configured. How is the client getting the IP address from the VLANs of these multiple interfaces:
Answer: round-robin

Lab 3. This is related to security settings.

All the best amigos.

Got 1000/1000 today. All questions from these dumps. 4 labs as mentioned in comments. Total questions were 74.
Thanks Angel :)

This Exam is valid 100%. I passed today 03 March, 2014 and got (Total 956/1000). Also i got 100% in maintenance & troubleshooting.
The Labs are:
1st Lab:
An AP connected to a WLC through a switch. There are two DHCP pools, one on the WLC and the other on the switch. The switch excludes the ranges of WLC DHCP pool from its pool. How can the clients get their IP address? (Choose two)
A) Client will get its IP Address from the WLC.
B) Client will get its IP Address from the switch.
C) Client will get its IP Address from WLC & Switch ( Round robin between them ).
D) Client can get Its IP statically.
Answer: A, B
And the Other labs are such as the below.

Thanks

Hi,
I am ready to take my test but I have a question
I do not understand when they say different order, can someone explain me please?

Still valid thanks Angel. Passed with 903
marks on 23 FEB 2014.
Got 4 sim questions those mentioned below in the comments.

Hi today I put it on 881 and it is still valid. The biggest problem we made ​​the order of the questions and more options. LABs there actually exist and are exactly what you have mentioned.

I passed on the exam today 978/1000.
The dump still valid, but the answers are in different order.
I got 4 labs and not all are in the comments.
640-722 Quick Reference (Jeromy Henry), very useful.

Passed the exam today 978/1000, dump still valid, got 4 labs and some are not on the comments. The answers are in a different order too.
I read 640-722 Quick Reference Book (Jerome Henry), very useful.

Passed the exam with 1000/1000, this dump is 100% valid, all questions are from this dump. labs are as mentioned below.

I passed the exam today with 1000/1000 the laboratories they left me are:




1st Scenario: An AP wasn't able to authenticate to WLC. AP on a Vlan, WLC on another VLAN. The connected switch has the DHCP for both vlans.
My answer: add DHCP option 43 hex "WLC IP in hexadecimal format" because the AP to take DHCP option 43 takes, and address of the WLC is the ip administration in hexadecimal.

2nd Scenario: AP, Switch and WLC. Two DHCP polls configured one on switch and one on WLC. The question was about how the client get the IP.
My answer: Static IP for users, because the DHCP in WLC, and DHCP Server overlap, so do not give address.

3rd Scenario had 2 questions: They had shown config of AP, WLC and switch to look at and figure out the problem.
My answers:
(1) Wireless->802.11b/g (all the B Data Rates were disabled and old clients with only 802.11b weren't able to connect)
(2) WLAN General Settings misconfigured (Radio Policy was on b/g only so 2.4Ghz just allowed, no 802.11n high data rate available)

pass the exam today with 1000/1000 is still valid, only 4 laboratories,

still valid with 4 scenarios
the same questions but different order of the answers
967/1000, tks!

Ayer pase el examen 640-722, Ángel continua siendo válido, y se presentan 4 laboratorios.

Yesterday I passed the 640-722 exam, Angel is still valid, and 4 laboratories are presented.

Thanks, the dump is still valid with additional questions 4 Scenarios
978/1000

989 valid but there are 4 new topic

valid - 967 - 4 new sims, not from comments

I which that any one help me and told me exactly what is the require in this exame I prepare to tack this exam next satarday , please support

hello every one
first of all thanks for all comment which give me support before exam which I plane to tack it in this days but I have a few question that I wanna support from any one
first is this 164 q in this dumps cover all exam , what about labs ??
I only watch cbt video so can any one support me until the end
awdkotb@gmail.com

Million thanks, the dumps are still valid with additional questions 4 Scenarios
29-Jan-2014 pass

Hi everyone, Do they have any news about if this dumps is valid still?

Thanks a lot Leonardo.

Hi Pawan could you please share the 4 labs

Good and valid dump jet. I have passed today 20/01/2014.
Just a couple of questions regarding the configuration in the WLC and troubleshooting aditional about the DHCP configuration, WLAN and interfaces.

Passed with 946 no. 4 Sims as below comments.

Today I have passed exam with 988/1000. Dumps is still valid but some questions are not from dumps. I have got 74 question and 10 questions are not in dumps including 4 Lab question. All 4 Labs are new and not from the comments.

Passed Today with 967 marks. Dumps still valid but Got new lab questions in exam so keep close eye on comments before appearing in exam..
Keep stress on troubleshooting part as I did after reading that Lab question is changed in previous comments.
I suggest all appearing candidate please go through some material before appearing for exams like CCNA Wireless Todd or Quick reference by Jerome Henry.

The answer for Q8 is INCORRECT in this dump. The question deals with which command to enter to assign the controller to the native VLAN of the switch. The answer is:

"config interface vlan management 0"

NOT:

"config interface vlan management 20"

The question is asking you to assign the controller to the NATIVE VLAN on the switch. A native VLAN is always UNTAGGED, so you must use 0 and not 20 per Cisco's documentation:

"Enter 0 for an untagged VLAN or a nonzero value for a tagged VLAN."

(Cisco WLC 7.0 Configuration Guide)

Very good dump! All questions are the same as in exam. Passed yesterday with 967/1000.

Passed the exam yesterday. almost 10 new questions including 3 or 4 new LABs which is not in the dump or discussed before

Hi All, I cleared exam yesterday with 946 score. All the questions are same from the dumps (But answers of some may be wrong as i scored less) & 4 Sims also same as discussed below comments. Study both Kraven & Angel dumps.
Best of luck to all who are planning to take this exam.
Thanks to the publisher Angel & Kraven.
Be Good Do Good.

just today i passed the exam with 987/1000

all MCQs almost from this dump while i got 4 simulator scenario which also already discussed below in com

Scenario were:

1) Roundrobin method either wlc or switch will provide IP, client can be configured with static IP address. two answers
2) WLAN general setting is not configured correctly (N clients issue), Security WPA2 were mapped to tkip (old b clients issue).
3) Q1: Set AP TX power level to 4 (b/g/n radio currently set to level 5, changing it to 4 will increase by 3dBm) and Q2: What information will you see in the log? (select 4)
A: emergencies, alerts, critical, errors

4) set the dhcp option 43 hex f1040a0a0a0a (10.10.10.10) for vlan 20 DHCP pool

god luck!

Hey Guys

I was Make the test in 18/12 and this dump still valid...

But...........

The 4 lab questions aren't in "dump" and catch me surprise.

My luck is that i was see INE videos( more deep in config than CBT ) and have a little practice in WLC...

Good luck for all

can anyone share the sim questions and their solution plz..

whoever attempted the exam recently.

thanks a million

Hi,

what about the lab questions? are they also added in this dump or no?
i can only fine MCQ and DnD,,,,,,, where are the labs?

pass my exam today 9xx/100. Dump is still 100% valid. but... I had 4 labs (this was my bad part) in lab many printscreens of WLC and switch config and you have to answer one or two questions per lab... sorry I can't remember the questions :-( :-(
Thanks for your help Exam Collection !!! I Like it :-)

anybody took the cisco wireless test recently? because they changed the CCNA voice test I was wondering if they did the same for cisco wireless test...please help

please somebody give me the correct answer for this question :
Q126 which two options does this Icon represent about the status of the respective AP on a cisco WCS version 7.0 map ?(choose two)

I am planning for the exam tomorrow. Is this dump valid and all answer are correct in this dump ????????

I am planning foe exam on Next Monday. Is this dumps valid and all answer are correct in this dumps. Plz help me here thanks.

Scored a 978. I will be uploading my version of this dump with some corrections and changes. I got the same SIMS as mentioned in previous post except for a new SIM which has not been mentioned or shown. I do not remember the question. Below are the SIMS from previous post.

Q1: Gives a scenario where an AP can't reach the controller. They are connected through a switch and the AP is on vlan 1 and the WLC is on vlan 20. The question asks which switch commands will allow the AP to reach the WLC. All deal with DHCP option 43 and you must determine which vlan to apply it to and whether to use hex and ascii. The answer I chose was vlan 1 and hex.
Q2: Shows some WLAN, radio, and other configuration and first asks why clients cannot achieve full 802.11n rates. The WLAN is configured for WPA2/TKIP, so the answer I chose was improper security settings. Second part asks why some older 802.11b/g clients cannot connect. Answer is also security settings as the clients cannot handle WPA2/TKIP.
Q3: DHCP scopes within the same network are configured on the WLC and on the switch. They do not overlap. Question asks about client IP address assignment behavior. First, DHCP is not required on the WLAN, so a client can configure a static address. This is the first answer. Second answer I chose was that DHCP requests will be fulfilled by the WLC and switch in a round robin fashion.

Below are the answers for labs I got:
1) Roundrobin method either wlc or switch will provide IP, client can be configured with static IP address.
2) WLAN general setting is not configured correctly (N clients issue), b/g/n networks not configured correctly (old b clients issue).
3) Set AP TX power level to 4 (b/g/n radio currently set to level 5, changing it to 4 will increase by 3dBm)
4) set the dhcp option 43 hex f1040a0a0a0a (10.10.10.10) for vlan 20 DHCP pool

please quys tell us exactly the Labs you got in ur exams ?????

I pass today this dump still valid

Passed 1000/1000, dumps are very valid, but lab sims I've received in exam are not included in these dumps.

Pass yesterday with 956/1000

I´ve used:

CCNA Wireless Official Exam Certification Guide (CCNA IUWNE 640-721)

CBT Nuggets Videos

Examcollection.com

All questions for this dumps, four scenarios, all scenarios are describe in the comments for this dump.

you have more information about materials in www.n3networkweb.com.

examcollection.com Admins, please dont erase my post.

Good luck

Still Valid: Passed with a score 978 of 1000
Found all the questions in this Dump. Plus I had 3 Scenarios:

1st Scenario: An AP wasn't able to authenticate to WLC. AP on a Vlan, WLC on another VLAN. The connected switch has the DHCP for both vlans.
My answer: add DHCP option 43 hex "WLC IP in hexadecimal format"

2nd Scenario: AP, Switch and WLC. Two DHCP polls configured one on switch and one on WLC. The question was about how the client get the IP.
My answer: round robin between the two DHCP.

3rd Scenario had 2 questions: They had shown config of AP, WLC and switch to look at and figure out the problem.
My answers:
(1) Wireless->802.11b/g (all the B Data Rates were disabled and old clients with only 802.11b weren't able to connect)
(2) WLAN General Settings misconfigured (Radio Policy was on b/g only so 2.4Ghz just allowed, no 802.11n high data rate available)

DAmp fully valid. Passed today with 978

•SALAMA from Egypt :

any new questions or all from this dump ?

Passed yesterday in Egypt 9XX , LAB SIM same like Atul Jain below

@Mike Congrats on your pass. Any recommendations or thoughts on dump

Past exam 989/1000 .
Thanks for your support Exam Collection!!!

@ bonnyfused and Atul Jain :

I still don't understand Q8 about the CLI command for the controller.

As the switch port is configured with switchport trunk native vlan 20
I understand the switch won't tag the vlan 20.
so . the controller should not tag the management .
then the correct answer would be :

config interface vlan management 0
Does it make sense ?

Thanks for your help guys.
Br
improve2013@outlook.com

Today I Pass the exam & I have scored 946 /1000 .
This Dump is valid 100%.
Thank you for all of you guys & all the best .

For virtual wireless lan controller setup with gns3 please drop an email to netspikes.labs@gmail.com

Muchas gracias, pass 798.
Thanks a lot, very useful

the scenaries:

1.- old laptops cann't connect to network
A= all b (DSSS) speed where disable, 1 2 5.5 y 11 where disable.

2.- SW has a dhcp pool for vlan X from 10.10.X.0/24 from 10.10.X.128-254
WLC has a SSID wich use DHCP server from 10.10.X.11 - 10.10.X.127, DHCP override is not selected on WLAN config, also the Management interface is in the network 10.10.X.0 using last octect 2,the question was Who deliver DHCP to the clients(choose two). and the option where like:
the client received from sw
the client received from wlc
the client dont received ip because overlapping
the client received from wlc with a round robin scenario

Another question about the loggin, you must know the order of debuggin, error and alerts.






Thanks a lot

HI Dear JUNAID (from the US)

Basically in this exams aint no reall practical LA B at all.

You will find something almost similar to LAB (like a simulation), but the beaty of it is that You Dont Have to Configure Anything at all.

They will simulate a senario, with a kind of Network Topology and they will make One or Two (thats what i got in my exams at least- one with Two quations and the other with only one quation). But they will have like a multiple chiose Answers where you will have to aswer according to the quations and given Senario. Thats all. you dont configure anything at all.

Hope i have aswered your quation

Good luck
So all you have to do is just

Hi Everyone out there!!

Just wanna share with you about my exam experience..
and as well to say that, This DUMP is STILL 100% VALID.

I have cleared today few hours ago the ccna wireless exam. and i must admit you, i only study for about 5 or 6 days with ONLY THIS DUMP and nothing else. Its just few (2 or 3 quations) that i didnt see in this Dump.

So for those thinking of taking this exams, please do so, coz if i made it within 5, 6 days of studying. so anyone of u can do it as well.


So thank you so much master ANGEL with this 162 Dump quations that made my day. fully and total and deep appreciation.

And good luck for anyone getting ready to go for the exam,
so just go through this dump over n over, ya´ll make it.

God bless n protect

Peace

Hi guys, can anyone list all the simulations that are asked in the exams..and the best source to learn these simulations?

Dump 100% valid, just pass yesterday. Tks you guys!

I'm not sure what has happened but I studied from this dump and maybe 30% of the questions were from this. I had a lot of things that I have never seen in my study material or this dump.

hy Atul Jain. thanks for your reply.

Maybe I misinterpret the sentences, but.

A native VLAN on a trunk refers to all the packets which are NOT tagged with VLAN tags, right?
Thus, if I do tag with VLAN ID 20 on the WLC, I would not actually land in the native VLAN of the trunk.

Or am I missing something?
Kind regards!

The switch is set to use vlan 20 as native vlan on its dot1q trunk.

For the controller Cisco says:
"Enter 0 for an untagged VLAN or a nonzero value for a tagged VLAN."

http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70mint.html#wp1120860

So "config interface vlan management 20″ is the right answer.

Hy People!
What is correct to use in the CLI to assign the WLC Management Interface to the native VLAN of the trunk Interface on the Switch?

int gi1/0/10
[.]
switchport trunk native vlan 20

Is it:
config interface vlan management 0

or

config interface vlan management 20

?? I got two different answers in two different dumps (in this one "20", in the dump with 171 questions it states "0").

Thanks.

Dumps very valid. I had 74 questions in the exam out of which 4 questions were lab sims; rest 70 were all from these dumps. Cleared the exam with 978/1000. Please read the comment section of the dumps uploaded before this version (The one with 171 questions).

In some of the lab sims, there were two questions in a single sim so total of 6 questions in 4 sims.
I can't remember exactly all the lab questions but here is what I recollect.

1. First one was about the DHCP troubleshooting and answer to this question was "DHCP option 43 hex f1040a0a0a0a for vlan 20 DHCP pool"

2. The question was: What power level should be set on the WLC to increase the power by 3dB for 2.4 GHz frequency band. The current power level set was 5. So the DESIRED power level would be 4 (1 being the max and 7 being the least). Be careful: Both 2.4 and 5 Ghz WLC screenshots were shown so concentrate on 2.4 Ghz. only.

3. WLC and switch both were providing DHCP service and the question was which would provide the IP addresses. Answer to the questions is : a) Both WLC and Switch would provide IP addresses in a Round-Robin fashion. b) APs can be assigned static IP addresses.

4. Question was why old 2.4 Ghz clients and clients using N-adapter were not able to associate to network : Can't remeber the answers.

Hope this helps.

Thank you Examcollection and the uploader for dumps.

Hi ccnaw from Taiwan

could you please inform us about the exam ??
how many Q. and what's kind of Q. you got ??
how long is the exam ??

thank you in advance.0

964/1000

Dumb is still valid. Passed my exam today with 924/1000 marks!
Heeya!

The correct order for Drag and Drop example question steps for Open Authentication is as following:

1. Client sends probe request
2. Either Access Point A or B send probe responce.
3. Client sends authentication request
4. Access point confirms Authentication and registers the client
5. Client Sends association request
6. Access point confirms association and registers the client

I'll be taking the exam on 30 Sept. For AP status Icon questions on WCS 7.0 map, see the following link. It gives a good idea about the Icon colors. The previous dump posted on 5 July had one answer wrong. This link would clear the doubts.

http://www.cisco.com/en/US/docs/wireless/wcs/7.0MR1/configuration/guide/maps.html#wp1090761

The dumps are still valid. I got 958/1000 today. I attempted total 74 questions in 110 minutes. Finished exam 8 mins before expiration. 3 new Scenario questions not mentioned in the dumps are below:

1st Scenario was about why clients are not getting IP from WLC? Instead clients getting ip address from dhcp configured on switch. My answer was: DHCP was not enabled on WLC.
2nd Scenario had 2 questions: They had shown config of AP, WLC and switch to look at and figure out the problem. My answer was: (1) WLAN General Settings for 802.11n and (2) Security settings for 2.4Ghz clients.
3rd scenario was about why WLC can't connect it's default gateway. DG was the switch. My answer was: change the interface management vlan on WLC
Please don't rely on my answers as I got only 956. However, I'm putting it out there for reference. Thank you all.

About Q. Sushil Verma ,I think u program is trial Ver not full Ver

please i have a question
i already have CCNA (routing and switching) certified
and i want 2 certify the CCNP wireless
so my question is .is it must to take the CCNA wireless first b4 i go to the CCNP wireless exams or not ????

pass my exam today 924/1000
The dump is 100% valid but there are three scenarios included in the exam
Scenarios are about switch conf, ap conf and WCS conf. There are 1 or 2 multiple choice questions inside them; you have to say where are the conf errors

I'm not able to see all 162q in it. it is showing me only 5 questions.is there something that i'm missing.

sorry for the previous comment, i was confused

note: answers of Q29 are mismatched with answers of Q31

pass my exam today 903/1000
The dump is still much valid but there are about three new scenarios included in the exam

file ok

Passed the exam with a score 978 of 1000

Past exam 9XX/1000 last night.
Very good and Valid Dump with great explanations and no mistakes (that i could find)! HIGHLY RECOMMENDED for studying!!!
Labs for the exam are listed in the last dump (are also valid)

Thanks for your support Exam Collection!!!