Pass Your Cisco 642-902 Exam Easy!

Is this dump still valid?

its still valid????

is this still valid?

This dump is still valid???please help me...;(

hi..dumps still valid??

Passed today, dumps still valid. Thanks igor and digtal tut.

Today is the last day but if anyone is giving it today, got one new drag and drop question. It was regarding OSPF neighbor states so please read what each states mean.

Passed today with 1000/1000 marks. Dumps are still valid and it is safe to assume that they will be until 29th Jan.

Same 5 labs with only minor changes (such as different Procecss ID/Area/IPs etc).

No D&D in my paper. There is ample time so no need to worry about time factor.

This Dumps are 100% valid and all the 5 simulation of digitaltut.com. Thank You..
Please read the simulation question properly and double check the OSPF process ID, Area ID and EIGRP AS.

Passed today 824p.Thank you God and all of the peoples who helped on this website and digital tut. just 1 new question. Lab same, just maybe some different ip/area id

Passed today 27/01/2015 in Czech Republic. 935/1000. All the questions were from Igor and Diditut. Thank you very much, you made my exam easier. There were minor changes but nothing too complicated. I use the vces after I learn and if you know what you are doing, than it is just perfect. I lost some points in EIGRP and I have no idea why. It does not matter as long it is passed.

Passed on 24-Jan-2015. Dumps still valid. OSPF Stub sim question had process id 19.

passed today with 1000/1000
This dump is 100% valid. Thanks to Igor and Digitaltut

hi Guys
Just cleared Route today, 44 MCQ questions, 5 Sims , 1 D&d
All 5 simulation questions were same as in Digitaltut but with slight changes in area IDs, router names, AS numbers and ip addresses, 1 new D&D question about OSPF states , Redistribution Sim requires you to be able to ping and telnet from R1 to R4 LAN address, ping works but Telnet doesn't work , but i got full marks for that, thanks Igor and digitaltu and good luck to you all.

Although MCQs is from this dump. This huge file contains 397 and difficult MCQs in exam i found bit easy. Differnt Drag and drop and also Got 2 Differnt lab requierement for OSPF LAB.Process ID 37 area 58 and some other diffenr requierement. But luckly i manage to pass.

Passed today. Got all 5 labs. redistribution of OSPF TO EIGRP is bit problem. I found link between R3 to R4 is fa0/1. Digitaltut is very useful

pass exam yesterday 850/1000
dumps from Igor.397q is 100% valid
Got all 5 labs & 2 DD.. EIGRP OSPF Redistribution sim we need to ping & telnet from loopback interface of R1. Ping is working from R1 but Telnet 172.x.x.x getting error at the 1st number of 172.

الحمد لله
pass exam CCNP (route 642-902) today
score 1000/1000
dump still valid all from dump
4 D&D
5 SIM
EIGRP OSPF Redistribution Sim link between R2 and R3 fastethernet so should use distance eigrp 90 105 on R2...
OSPF SIM change proccess ID and area number
other sim no change

I cleared my CCNP today by passing the Routing exam with 956 marks.I failed it 3 times but never gave up until today.I thank you Igor and Co for your help.

Finally pass the EXAM 642-902
WITH SCOORE (( 1000 / 1000 ))
FROM EGYPT :)

Did passed today morning, 967/1000. Dumps valid.

Pass 841 January 23,2015
Some new question :( I answered wrong . but mainly in dumps IGor .
5 lab :
EIGRP OSPF redistribution Sim :
BW 100000kbit/usec , DLY 100 usec in r3 --- r4
link R2 to R3 is Fast Ethernet .
EIGRP stub sim : I'm a little giddiness when one subnet show ip summary-address eigrp as 10.2.0.0 255.255.240.0 when link r3 - r4. sure because this is the simulation
OSPF sim and policybase routing OSPF virtual-link other AS and ip address
wish you good test
tkanks www.digitaltut.com and IGor

pass exam today 827/1000
dumps from Igor.397q is 100% valid
Got all 5 labs .. redistribution of OSPF TO EIGRP is bit problem. i found link between R3 to R4 is fa0/1 & its metrics are B.W =100000 delay=100 reliability= 255 load 1 mtu= 1500

Different Drag and drop question.

be careful with ospf and eigrp stub.

Thanks to igor.

Pass 806 5 lab digitaltut 4 D&D, dump Igor 100% tks all for help, ;-)

hi to all, i'm going to take this examen tomorrow 23-01-2015 at morning. Anyone knows if it's valid for ? Ty a lot.

i'll take my examen tomorrow on 23-01-2015 at morning. Anyone knows if it still valid?

Hi all, I passed Route (642-902) with score of 935/1000 on Thur, 22/Jan/2015 at Hanoi, Viet Nam

Thanks to:
http://www.digitaltut.com/share-your-route-experience

please vote for this file
Cisco.Passguide.642-902.ROUTE.v2013-06-17.by.Igor.397q.vce
http://www.examcollection.com/cisco/Cisco.Lead2pass.642-902.v2013-06-17.by.Igor.397q.vce.file.html

Start VCE Player 1.1.5
Exam > Options > clear Randomize questions; clear Randomzie choices where enabled > OK

There are 50 questions on exam. You have 120 mins to complete the exam (+30 mins if your native language is not English). While taking exam please write your notes down on yellowboard after you using show command (show

run,..). Please remember, after click Next button, you can not go back or book mark the current question.

EIGRP OSPF Redistribution Sim
http://www.digitaltut.com/route-eigrp-ospf-redistribution-sim#more-26
link R2 to R3 is Fast Ethernet so need using this command: R1->R2->R3->R4
R2(config-router)# distance eigrp 90 105

EIGRP Stub Sim
http://www.digitaltut.com/route-eigrp-stub-sim#more-30

OSPF Sim
http://www.digitaltut.com/route-ospf-sim#more-84
may be all router in OSPF process 21 or similar (not process 1)
After finish config, you must using command:
copy run start
on 3 routers

IPv6 OSPF Virtual Link Sim
http://www.digitaltut.com/route-ipv6-ospf-virtual-link-sim#more-32
after finish config, you can check on R1
show ipv6 route
to see FEC0:4::4 on R1's routing table
You can not using ping FEC0:4::4 or ping ipv6 FEC0:4::4 (because simulator exam)

Policy Based Routing Sim
http://www.digitaltut.com/route-policy-based-routing-sim#more-28

passed today. dumps are still valid. I had 1 d&d which wasn't in this dump, the answers incuded internal and external routers. make sure not to shortcut (tab) and type commands slowly, I felt that I had points negated because of that. studied labs in digitaltut.

Thanks you Igor , all questions in this one .
LAbs're the same digitut.com but has only different OSPF lab ( prossess ID is 39 , not 1 ) . Good lucks to my friends.

Friends who passed recently, will you please elaborate about new OSPF SIM. What they want in new OSPF SIM.

@samah
hello
i got 1000/1000 and "route-map PBR permit 20 " isn`t required

Passed few days ago with 9XX.
50 MCQs, No DD's or Sims.
5 labs (EIGRP-stub and OSPF-totally stubby as well). Some IP's/Areas/AS numbers may differ.
not the easiest one but if you are well prepared you'll make it. Almost one week left, Good Luck to all ! and many thanks Igor and digitaltut!

hello,

it's there any change on the ospf lab? i see that in digital tut we have to configure a totally stub area.

الحمد لله
Pass today20/1/2015 with 850 score
50 questiones,5 labs from digitaltute, no D&D
dump is still 100% valid, Thx igor & digitaltut

Passed on 19th Jan 2015. Dumps are valid and all labs were from Digital tut, slight changed in IP addresses.

The OSPF SIM Lab was changed and it didn't as for creating STUB area. But I lost marks in that and got overall 898/1000. So make sure to read the questions properly.

I'm Passed with 8XX/1000.
43 MCQs, 2 DD & 5 labs:
1- EIGRP OSPF Redistribution
2- Policy Based Routing
3- IPv6 OSPF Virtual Link
4- EIGRP Stub
5- OSPF SIM
Change in OSPF SIM lab:
-Process id & Area id change in topology.
Thanks to igor and digitaltut

Hi all,

Reference Q306

Why would R2 Be the DR ? I though that Router4 would be as its the next highest ip address ?

There seems to be lissin information ?

Thanks

Hi Guys, Am gonna write Routing on 24th Jan. Will this dump be valid till that time. Some one kindly advise me.

this dump is Valid 100% thnx a lot for this, passed today score:935, five Labs, no drag and drop, my advise is to solve this full dump, then change the options of VCE to change the sort of answers

I want to ask anyone got score 1000/1000 if we must write "route-map PBR permit 20 " in policy based lab ?

Hello,

Did the OSPF lab has been changed? In the las comment i see that only the process id was changed.

Thank you

Passed today. Dumps are still valid. 5 simulation, 3 DD. OSPF with totally stub. Thanks Igor

Thank you Igor! Test dump still valid! Took the test jan 15, passed!!!

Passed today 5 labs. OSPF Area ID 24,all other same.

plz ... the exam in next week in cairo >> i need vce to open exam or any help

Finally I Passed the exam; 5 simulators; 1 D&D on ospf states; OSPF simulator will be totally stubby; enjoy and good luck all

Today i cleared CCNP Route exam 642 – 902. THANKS TO DIGITAL TUT
877 marks.
EIGRP STUB simulation – summarization doesn’t work , but updated the comments that is not summarized as expected. it got 100 % on it. – SAME AS IN THE DIGITALTUT.
OSPF Question lab has been changed. Four OSPF routers, our task is to ping R1 to R4, AREA id and process id is configured wrongly. Need to change everything , configure again. Make sure it pings from r1 to r4 look back address. Easy to understand and we can easily complete it.
IPV6 OSPF virtual link lab – SAME AS IN THE DIGITALTUT.
Policy based router – SAME AS IN THE DIGITALTUT. you have test machine, where you can genreate http traffic , 9 traffic generated , we got the route map have logs and access list matches .
EIGRP – OSPF Redistribution – is same , some ip address change , but we type the same commands.
Lot of multiple choice question and ipv6 questions. no D&D FOR ME.
397 IGOR dump is still vaild. Questions are same , easily can clear.
Need to complete CCNP TSHOOT in one week ,Only Tshoot left out to get Certified ,
Before 29 th as Cisco upgrading the version,

I am unable to open this file on vce.please share link to download the compatible one..

Passed it on 12/1/15, 935/1000. only 1D&D, 5labs
All labs r same as on digitaltut.
watch out for Ospf process id and area numbers in Ospf lab.

Eigrp-Ospf redist. fastethernet link b/w R2 and R3, so dont forget distance command on R2....this command distance eigrp 90 ? doesnot show option for external route. so simply put router eigrp xxx(see in sh ip protocols) distance eigrp 90 105. do sh ip route at R1, ping from R1 and traceroute from R1 the network ip behind R4.sh ip route at R4 also to chk loopback of R1.

Eigrp Stub same lab, only show 1 subnet of 10.0.0.0 but i letf it and get passed.

Ipv6 Osfp virtual link same lab, only u need to do sh ipv6 route at R1 to see R4 loopback.

PBR lab same too, must do this command....route-map pbr permit 20
generate trafic from host for testing and do it atleast three times just to confirm that packets increased. Do sh route-map pbr to see these packets.

read all these dumps still valid. better practice labs on Gns3. Good Luck, hope it helped u guys. I am onto Tshoot now.

Hello

Passed today 1000/1000!

3 drag & drop (loke one from digitaltut), 5 labs and 42 Questions.

OSPF lab is with totally stubby

All questions are on igor dump.

What they are required instated of "Stb and Totally Stubby" in OSPF sim
Need any one to answer !

1.The change in ospf sim is that do not ask stub and totally stubby area
2. different Drag and drop question is that,the OSPF states

Down: No information has been received, but Hello packets can still be sent to the neighbor
Init: A Hello packet is received, but the ID of the receiving router was not included in the Hello packet.
2-way: Each router see its own Router ID in the neighbor field of the Hello packet; there is a DR/BDR election.
Exstart: The routers and their DR and BDR establish a master-slave relationship.
Exchange: Routers exchange DBD packets that describe the contents of the entire link-state database.
Loading: Based on the information provided by the DBDs, routers send link-state request packets
Full: All the router and network LSAs are exchanged and the router databases are synchronized

Passed today 8XX/1000.
45 MCQs & 5 labs:
1- EIGRP OSPF Redistribution
2- Policy Based Routing
3- IPv6 OSPF Virtual Link
4- EIGRP Stub
5- OSPF SIM
Change in OSPF SIM lab:
-Process id change, Area id change in topology.
-Ping not working
-Solution: configure ospf on routers missing ospf config for full connectivity. Ping will work after completing configuration

Passed...no new ?'s, no D&D, labs; virtual-link, redistribution, eigrp, PBR, and OSPF areas (this sim was buggy, had the option to retest) chose to take it! 843/1000.

Alhamdullah ...Passed Today 10-12-2015 850/1000 all from Igor & Digital Tut Just one D&D out from this dump ..... Just be careful During Answering Good luck for all

plz help me .....wht is the change in ospf lab...

I need VCE v1.2 to open this dump, please hook up.

Thanks GOD, and igor .This dump still, today I've passed 877/1000.
Same questions, different answers order.
45mqs, 1 d&d, 5 labs.
1- EIGRP OSPF Redistribution
2- Policy Based Routing
3- IPv6 OSPF Virtual Link
4- EIGRP Stub
5- OSPF

Can anyone explain OSPF sim? whats changes was there?

Valid
Passed on Jan 6th

how much time i have till i certify CCNP R&S after i passed the old route

This dump still, today I've passed 1000/1000
50qs, 4 d&d, 5 labs

Passed the exam yesterday. Dump is still valid 100%. all 5 Sims from digialtut. No D&D

the dump is still valid
most of the questions were select (three,two) msq
all 5 labs were there in the exam but some routers' name interfaces are changed. only one drag and drop question and it is about OSPF states down,int,2way....

unfortunately, i did not pass it but i will retake it again in 5 days

got 850 today. The OSPF sim is different in the exam. I probably messed this up but all other questions were from this dump. There must be some mistakes in this dump though as 150 point drop from one wrong sim doesn't make sense.

got 850 today. The OSPF sim is different in the exam. I probably messed this up but all other questions were from this dump. There must be some mistakes in this dump though as 150 point drop from one wrong sim doesn't make sense.

Dump is still valid, no new questions , I cleared it yesterday passed with high scores, but don't memorize, face it with knowledge. 5 labs, 3 D & D's others are MCQ, totally 50 Qs.

thanks.
Dump still valid passed today, 45 question 5 labs no Drag&Drop

Still Valid
Passed today.
All sims from DigiTut came in the exam, 3 DD
copy run start wasn't working in most sims but please still try to do it. I guess few answers are wrong in this dump, so if in doubt check on cisco's website.
The other dump by Flora is also valid
Thanks all.

Dump is still valid. passed 935/100. Copy running-config startup-config is not working in the simulation except for OSPF lab. make a comment in each question which you cannot save the config. 1 Drag and drop, 5 Labs. Thanks.

Dumps is still valid. All the questions are from dumps only. I passed yesterday.

Hi All,

Is any one cleared the exam in Jan 2015.
Is this dumps are still valid ?
I am planning to write the exam in next week. Please provide some tips how to prepare for the exam.

Thanks in Advance,
S

Dump is still valid. Provided you've actually studied the material, there isn't any reason you can't pass with using this dump. 5 lab sims, 3 D&D.

Passed today with 877.
All questions valid.

Dump 100% valid. Pass with 9xx/1000 from MY. Thanks to igor and digitaltut

Passed ccnp route today with 850..
Wasn't easy as it looks.. practice the labs as much as u can.
Found Eigrp stub is not giving the output.
Igor is still valid. 100% questions are from Igor only but i dont understand where i lost the marks..some wrong answers are there in Igor (guessing )

Dumps still valid passed today

dear all , pls i need help , iam preparing for the cisco Route exam 642-902 and the vce file do not work with the updatec vce player , is there any one have the older version ( any one passed the exam in june , july , august , september ) to send my the file to my mail , engkhd@hotmail.com , thx

I will be taking the exam on the 13th of January and I am using this Dump in reviewing

Alhamdulillah Passed today 1000/1000. Dumps are still valid. 42 Q, 5 SIM , 3 D&D.

cleared the routing exam yesterday scored 900. all MQ are from igor. concerning the lab on eigrp stub. i tried the 255.255.0.0 and 255.0.0.0 mask but none of them gave me 2 sunbets. it shows 1 subnet and left is as it is.on policy based routing i used "route-map pbr permit 20 " but it was not important because i didn;t see any change while using show route-map command.the rest of the sims are similar in digital tut. 2hours and 25 minutes is morethan enough.good luck

Dump is still valid..I passed exam last Saturday with 891/1000 marks..then today my friend passed exam with 850/1000 marks.

Pass today with 898 score
50 questiones,5 labs from digitaltute, no D&D
dump is still 100% valid, Thx igor & digitaltut

passed several days ago with 1000/1000 marks, this dump is still valid, only 1 new question and it was easy, labs are the same but change in ip address although redistribution lab requires to ping and telnet from R1 however telnet wasn't working and i got full mark, read carefully ospf lab as it requires some numbers to configure(area id, etc)

Passed the exam earlier this week. Studied well hard for the exam and it was not easy even with the dumps. You really really need to get the labs set up and have a play with all the sims.
The actual exams have different names for the routers, the subjects were also different, 192.168.33.4 for one of the labs, process and area ids were not the same. These are simple to put right if you understand the concepts well.
Do not learn it parrot fashion, the order of all the MCQs are mixed up and are not in the same order as what has been listed in the dumps. Again, this is no problem if you understand the concept.
All 5 labs were present, 5 drag and drops and the rest were multi choice. Onwards and upwards, I am off to tshoot now and complete my CCNP. Good luck to one and all.

@CJ , can you please expliain bit about the issue you faced in Redistribution lab? if there is a fast Ethernet link what needs to be done?

thanks

Dump is still valid. Passed on week of 15DEC2014 with 898. I missed a few on purpose, and I think there is one sim that I did not get all marks. I had all 5 simulations, and one drag and drop. I could not remember if I had the simelts/hotspots. I normally use a test dump as my very last piece in studying...I read the book, did all the labs and watched all the trainsignal videos for this exam.

dump still valid, i passed today with 828 marks. all the questions from this dump. thanks a lot guys

Still Valid 100% The Exam I Make It today 935/1000

Alhamdulillah i passed CCNP route paper today.Dumps are still valid. 50Q ,5 SIM , No D&D

Uff... Passed today with 935/1000. everything is from this dumps.. thanks to digitaltut and igor for their effort... this dump is 100% valid. please study hard.. in MCQ the answers are jumbled hence check b4 u tick the answers...
i got 5 labs which are there in digitaltut and 3 D&D questions.. please check the OSPF process ID, it may deffer..

redistribution of OSPF TO EIGRP is bit problem. i found link between R3 to R4 is fa0/1 & its metrics are B.W =100000 delay=100 reliability= 255 load 1 mtu= 1500.

I got seatle/Indianapolis process 36 area 22, IP 192.168.16.4 not 192.168.4.4 as in 9tut// thx to whom submitted the dump

For new users please use the VCE version 1.0.2 to open the above file..

Dear Venkat / All ,

I checked in digitaltul at found only 5 sims no solutions . There are some downloads for GNS simulation i think . Is it all from which the questions come .
Thanks in advance !!!

Thanks to Allah, thanks to Igors for pass4sure and digitaltut for labs. after hard work I passed this exam yesterday with mark 850. Just only one D & D was from outside apart from that everything from pass4sure. and lab from digitaltut with bit ip and name change. good-luck to everyone

passed today with 93X in Canada.. got 1 D&D only , not from this dump. It was about different type of areas routers. internal, ABR, ASBR, Backbone. easy peasy. Lab.. for route-map next hop was .2 instead of .1, be careful. copy run start only works on OSPF lab. file name is startup-config. It will show you what the file name should be. I got 2 subnets 10.0.0.0 fine, just go with 10.2.0.0/16. Thanks :)

Dumps full valid. I passed it. But check digitaltut for minor updates.

What about the new exame 300-101, does anyone has some dump of it? Could anyone help me?
michelbragaguimaraes@gmail.com

Hello;
I can't open the dump with my VCE; always want latest version; please anyone if you can send me the correct crack VCE version so i can open and do my test as well; thank u all for the help. rooth_symon@yahoo.com

which vce version this dumps Can be Run .. plz tell me Em Waitting .. ?????????????

Guys plz Tell me which vce version should i download to open this Dumps .. kindly tell me Im Waitting

Please which version of VCE to open this file

yes, digitaltut is enough. we will get the same type of questions. Ip address and serial/fast ethernet links alone will get changed.

Hi guys am really confused,I have tried this exam for the second time now and failed by 8 marks.I really don't know what have changed.can anyone help with latest dumps.Its my last exam for CCNP