Pass Your Cisco 300-206 Exam Easy!

prmium dump is 100% valid, passed today 930

858 Passed the exam today.
Had Botnet and NAT .

Passed the exam today,Premium dump is still valid.
Just look out for the LABS.
Had Botnet and NAT and syslog Hotspot Question.
Some questions answer are wrong lookout for that...Good luck

Please, people, share the 197Q dump with me. I tried to passe with 222Q dump and failed (830marks)//

The dump uses 10.0.0.0 as IP address for Network Object but others use 10.10.0.0 instead. Please advise me on the right IP to use. Do the Neddful

Passed the exam today,Premium dump is still valid.
Had Botnet/NAT and logging.

@GHM Once you get a LAB in the exam You cannot see the other TABs except the Device setup TAB. You have to drag the window to the left & on the right you will see a scroll bar just as in your browser :) scroll down to see the firewall & other options....try it with your browser right now bro.

You drag your window by clicking & holding the upper dark area of your browser, same is how you do it in the exam :)

Dumps are valid,i passed today (21-July-2016) got 910 marks. All questions were from this dumps. I got Botnet & NAT lab % Syslog failure Q&A. Good luck guys Prep hard & go through all the Questions & Labs in this premium file.

Passed the exam today,Premium dump is still valid.
Just look out for the LABS.
Had Botnet and NAT.
In the NAT lab i lost mark as I was unable to view nat translations on the ASA

Anyone know how the labs function, my friend failed as he by pass the labs due to can't scroll down to look for Firewall tab. He only manage to see Device Setup tab.

Passed the exam today,Premium dump is still valid.
Just look out for the LABS.
Had Botnet and NAT.
In the NAT lab i lost mark as I was unable to view nat translations on the ASA.

Guys what's this 197 q premium file? The premium file I bought from here is Cisco 300-206 Premium VCE which has 195 questions? Where is this premium 197 q dump?

passed today 886. All questions from 197Q dump.
I have got all controversial questions in my exam and my answer was:
show version
use threat detection to determine attacks
snmpv3
Rate Limit
controller configuration group
multitenancy
This access list does not work without 6to4 NAT
The capture does not get applied and we get an error about mixed policy

Obviously some of these answers are not correct as I lost a lot of points.

Lab sim: NAT, Botnet and logging questions

Passed 8th July - Premium 197q dump is pretty much 100% valid. some notes...

question regarding choose 3 options describing transparent firewall, the exam only asks for 2 options - basically there is no option for "doesn't support dynamic routing protocols", so choose the options about mgmt. interface only and operates at layer 2.

Syslog simlet - exam instructions mentions there are 4 questions to answer, but then the questions section only has 3 - odd.

The NAT lab asks you to log into CLI of ASA and verify your NAT config - wasn't able to locate the CLI anywhere? any thoughts??? (not sure it cost me any points).

BOTNET lab was fine, as was all other questions, 57 in total.

And in case anyones wondering, the 108q in this file ARE a subset of the 197q, but obviously would recommend the premium file of 197q for completeness. please note I did spot an error in the 108q regarding cisco prime and what type of vpn's can it monitor, answer should be anyconnect and IPsec remote access, not IPsec s2s - the 197q file has corrected this.

above all else, make sure you study and know your stuff and not just rely on the dumps - else what use will you be on the job ;-)

Useful?

Done ..
Dump is still Valid.
Be carefull about the LABs, i Got two, NAT and BootNet Traffic .. both as covered on this dump, however, Cisco Labs is a bit crashed on my opnion.

@hamdy akl, please share the 197Q dump

Premium is valid 100%

Hi all, any body going to exam a few last day to share experiences with us and then are 197 Q valid and what about labs

i passed today 935 score premium dum 197Q valid with 95%

hi all,

are the 108 questions a subset of the 197 questions? are the 108 questions valid at all, or are they practice questions only?

Yes please guys can anyone tell how or where to get the 197 questions? please please help.

Hi all,

Does anyone know how I can get hold of the file with 197 questions? My file only has 108 questions. Is the 108 question dump sufficient for passing the exam, or do I definitely need the 197 file?

Any help appreciated, thanks,

Johnboy

where I am able to find out free DUMPS for MY CCNP Security Exam

Passed today with 9XX score. All the question were from the Premium dump. 3 Labs.... Botnet,NAT/PAT and syslog
Good luck those who are going to take!

Where can I find SYSLOG Hotspot question? Is it in the premium 195Q?

Passes today with Premium 197 Q .. 100%Valid

Dear All, I passed on 11-06-2016 with 961/1000 NAT/PAT and Botnet LABs with syslog Hotspot Question.

@abdi,
Premium is available as vce file only.

Hi
I am planning to give exam next week and i was wondering if premium dump is available in pdf. Or do i need to purchase VCE separately to open the vce file? Thanks

I am taking this exam tomorrow, used premium 197Q to review

Hi All
do you try the VCE Cisco.BrainDumps.300-206.v2016-06-09.by.David.200q.vce?
it's new

Hi All

Please share the latest dump!!! 194Q

Dear all,

what command you used for syslog lab to verify the output , I attempted the exam but got 836 marks my re-attempt is on 19 june.

Regards

szk

Hi guys, is the dumps (Cisco.Certkiller.300-206.v2014-08-18.by.CAROL.108q.vce) still valid? I am planning to take the exam now. Ps reply.

any body share information, how to buy , this VCE file also included software or I have to buy seprate software

Yes, premium dump is valid 100%

I passed on Friday with an 896. The 197 question VCE is 100% valid. All questions were from this VCE. Good luck all...

Hi Dre, did you use the premium file as a reviewer?

This dump is not valid. My exam failed at 29 May with 698/1000.
4 or 5 Q about STUN and a Q about Private Vlan types and...

FYI, the 197 vce is still 100% valid, I passed today with an 897. The IP address for the NAT lab is 10.10.0.0/16. Good luck all...

hey Vijay , tell us the result of your exam tomorrow of whether the 197 premium dump is valid or not , I will taking the exam on Monday 06/June.

Failed exam today. 836/1000. Sad. only 10 points. However going to retake this exam. Do you have a clue is there gonna be different questions on retake???

Dear All, could you please give link for registered VCE exam simulator. Also 300-206 dumps file. I am retaking this exam. As in last attempt my LAB was failed

Please confirm if the Premium dumps with 197 questions is still valid

Is 197 is still valid dump? please confirm

Is 197 is still valid? Please update us on validity of this dump

NAT LAB
on the NAT lab test IP Subnet given was 10.10.0.0/16.
The dump uses 10.0.0.0 as IP address for Network Object but others use 10.10.0.0 instead. Please advise me on the right IP to use.

I recall an IP Subnet of 10.1.0.0/16 given on the test I need to retake. What will be the correct IP address to use given IP Subnet 10.1.0.0/16?

Thank you all

Is 197 dump is valid.. I am planning to give the exam on 4th June

Anyone confirm if the Premium dumps with 197 questions is still valid ??

Anyone... Please confirm if the dumps with 108 questions is still valid ??

i am preparing for 300-206 exam,can you please let me know where i can get 197 que

Thanks Adbel Rahman.

Guys. Please dont go for exam. It has changed completey. You may fail if you try.

I failed today. I prepared 108 as well as 128 question thoroghly but no good result.

Regards.

hi friends, i have given CCIE security lab on last year but not cleared, So i want to know that can i give the ASA/Firewall and VPN exam saperatly, Please friends if any one having any idea then please suggest me.

197 still valid, passed 05/20/16

HI ALL, im having exam on tuesday.
I want to verify to those who took the examination, are these questions included? THANKS IN ADVANCE.
QUESTION 71
When will a Cisco ASA that is operating in transparent firewall mode perform a routing table lookup instead of a MAC address table lookup to determine the outgoing interface of a packet?
A. if multiple context mode is configured
B. if the destination MAC address is unknown
C. if the destination is more than a hop away from the Cisco ASA
D. if NAT is configured
E. if dynamic ARP inspection is configured
Correct Answer: D
Section: (none)
Explanation
QUESTION 72
Which Cisco ASA feature is implemented by the ip verify reverse-path interface interface_name command?
A. uRPF
B. TCP intercept
C. botnet traffic filter
D. scanning threat detection
E. IPS (IP audit)
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
corrected.
QUESTION 73
In one custom dynamic application, the inside client connects to an outside server using TCP port 4444 and negotiates return client traffic in the port range of 5000 to 5500. The server then starts streaming UDP data to the client on the negotiated port in the specified range. Which Cisco ASA feature or command supports this custom dynamic application?
A. TCP normalizer
B. TCP intercept
C. ip verify command
D. established command
E. tcp-map and tcp-options commands
QUESTION 74
On Cisco ASA Software Version 8.4.1 and later, when you configure the Cisco ASA appliance in transparent firewall mode, how is the Cisco ASA management IP address configured?
A. using the IP address global configuration command
B. using the IP address GigabitEthernet 0/x interface configuration command
C. using the IP address BVI x interface configuration command
D. using the bridge-group global configuration command
E. using the bridge-group GigabitEthernet 0/x interface configuration command
F. using the bridge-group BVI x interface configuration command
Correct Answer: C
Which additional Cisco ASA Software Version 8.3 NAT configuration is needed to meet the following requirements?
When any host in the 192.168.1.0/24 subnet behind the inside interface accesses any destinations in the 10.10.1.0/24 subnet behind the outside interface, PAT them to the outside interface. Do not change the destination IP in the packet.
A. nat (inside,outside) source static inside-net interface destination static outhosts outhosts
B. nat (inside,outside) source dynamic inside-net interface destination static outhosts outhosts
C. nat (outside,inside) source dynamic inside-net interface destination static outhosts outhosts
D. nat (outside,inside) source static inside-net interface destination static outhosts outhosts
E. nat (any, any) source dynamic inside-net interface destination static outhosts outhosts
F. nat (any, any) source static inside-net interface destination static outhosts outhosts
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Modified.
QUESTION 76
On Cisco ASA Software Version 8.3 and later, which two statements correctly describe the NAT table or NAT operations? (Choose two.)
A. The NAT table has four sections.
B. Manual NAT configurations are found in the first (top) and/or the last (bottom) section(s) of the NAT table.
C. Auto NAT also is referred to as Object NAT.
D. Auto NAT configurations are found only in the first (top) section of the NAT table.
E. The order of the NAT entries in the NAT table is not relevant to how the packets are matched against the NAT table.
F. Twice NAT is required for hosts on the inside to be accessible from the outside.
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 77
The Cisco ASA software image has been erased from flash memory. Which two statements about the process to recover the Cisco ASA software image are true? (Choose two.)
A. Access to the ROM monitor mode is required.
B. The Cisco ASA appliance must have connectivity to the TFTP server where the Cisco ASA image is stored through the Management 0/0 interface.
C. The copy tftp flash command is necessary to start the TFTP file transfer.
D. The server command is necessary to set the TFTP server IP address.
E. Cisco ASA password recovery must be enabled.
Correct Answer: AD
Section: (none)
Explanation
Explanation/Reference:
Super valid.
QUESTION 79
Which option is one requirement before a Cisco ASA appliance can be upgraded from Cisco ASA Software Version 8.2 to 8.3?
A. Remove all the pre 8.3 NAT configurations in the startup configuration.
B. Upgrade the memory on the Cisco ASA appliance to meet the memory requirement of Cisco ASA Software Version 8.3.
C. Request new Cisco ASA licenses to meet the 8.3 licensing requirement.
D. Upgrade Cisco ASDM to version 6.2.
E. Migrate interface ACL configurations to include interface and global ACLs.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 80
Which Cisco ASA (8.4.1 and later) CLI command is the best command to use for troubleshooting SSH connectivity from the Cisco ASA appliance to the
outside 192.168.1.1 server?
A. telnet 192.168.1.1 22
B. ssh -l username 192.168.1.1
C. traceroute 192.168.1.1 22
D. ping tcp 192.168.1.1 22
E. packet-tracer input inside tcp 10.0.1.1 2043 192.168.4.1 ssh
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 107
By default, which traffic can pass through a Cisco ASA that is operating in transparent mode without explicitly allowing it using an ACL?
A. ARP
B. BPDU
C. CDP
D. OSPF multicasts
E. DHCP
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Answer is updated.
QUESTION 108
By default, how does the Cisco ASA authenticate itself to the Cisco ASDM users?
A. The administrator validates the Cisco ASA by examining the factory built-in identity certificate thumbprint of the Cisco ASA.
B. The Cisco ASA automatically creates and uses a persistent self-signed X.509 certificate to authenticate itself to the administrator.
C. The Cisco ASA automatically creates a self-signed X.509 certificate on each reboot to authenticate itself to the administrator.
D. The Cisco ASA and the administrator use a mutual password to authenticate each other.
E. The Cisco ASA authenticates itself to the administrator using a one-time password.
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 109
Refer to the exhibit.
Which reason explains why the Cisco ASA appliance cannot establish an authenticated NTP session to the inside 192.168.1.1 NTP server?
A. The ntp server 192.168.1.1 command is incomplete.
B. The ntp source inside command is missing.
C. The ntp access-group peer command and the ACL to permit 192.168.1.1 are missing.
D. The trusted-key number should be 1 not 2.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Corrected.
QUESTION 110
Which Cisco ASA CLI command is used to enable HTTPS (Cisco ASDM) access from any inside host on the 10.1.16.0/20 subnet?
A. http 10.1.16.0 0.0.0.0 inside
B. http 10.1.16.0 0.0.15.255 inside
C. http 10.1.16.0 255.255.240.0 inside
D. http 10.1.16.0 255.255.255.255
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 112
Refer to the exhibit.
Which Cisco ASA CLI commands configure these static routes in the Cisco ASA routing table?
A. route dmz 10.2.2.0 0.0.0.255 172.16.1.10
route dmz 10.3.3.0 0.0.0.255 172.16.1.11
B. route dmz 10.2.2.0 0.0.0.255 172.16.1.10 1
route dmz 10.3.3.0 0.0.0.255 172.16.1.11 1
C. route dmz 10.2.2.0 0.0.0.255 172.16.1.10
route dmz 10.3.3.0 0.0.0.255 172.16.1.11 2
D. route dmz 10.2.2.0 255.255.255.0 172.16.1.10
route dmz 10.3.3.0 255.255.255.0 172.16.1.11
E. route dmz 10.2.2.0 255.255.255.0 172.16.1.10 1
route dmz 10.3.3.0 255.255.255.0 172.16.1.11 1
F. route dmz 10.2.2.0 255.255.255.0 172.16.1.10
route dmz 10.3.3.0 255.255.255.0 172.16.1.11 2
Correct Answer: F
Section: (none)
Explanation
Explanation/Reference:
QUESTION 113
Which statement about static or default route on the Cisco ASA appliance is true?
A. The admin distance is 1 by default.
B. From the show route output, the [120/3] indicates an admin distance of 3.
C. A default route is specified using the 0.0.0.0 255.255.255.255 address/mask combination.
D. The tunneled command option is used to enable route tracking.
E. The interface-name parameter in the route command is an optional parameter if the static route points to the next-hop router IP address.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Answer is updated.
QUESTION 114
Which configuration step is the first to enable PIM-SM on the Cisco ASA appliance?
A. Configure the static RP IP address.
B. Enable IGMP forwarding on the required interface(s).
C. Add the required static mroute(s).
D. Enable multicast routing globally on the Cisco ASA appliance.
E. Configure the Cisco ASA appliance to join the required multicast groups.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 115
On the Cisco ASA, tcp-map can be applied to a traffic class using which MPF CLI configuration command?
A. inspect
B. sysopt connection
C. tcp-options
D. parameters
E. set connection advanced-options
Correct Answer: E
Section: (none)
Explanation
Explanation/Reference:
QUESTION 116
Refer to the exhibit.
Which statement about the policy map named test is true?
A. Only HTTP inspection will be applied to the TCP port 21 traffic.
B. Only FTP inspection will be applied to the TCP port 21 traffic.
C. both HTTP and FTP inspections will be applied to the TCP port 21 traffic.
D. No inspection will be applied to the TCP port 21 traffic, because the http class map configuration conflicts with the ftp class map.
E. All FTP traffic will be denied, because the FTP traffic will fail the HTTP inspection.
Correct Answer: B

@ccnpsec
No it is A
[^E] mean not E (Capital E)

Hello,,
please update me where is 222Q and 223Q dump?? because i have seen 108Q only

Which URL matches the regex statement "http"*/"www.cisco.com/"*[^E]"xe"?
A. https://www.cisco.com/ftp/ios/tftpserver.exe B. https://cisco.com/ftp/ios/tftpserver.exe C. http:/www.cisco.com/ftp/ios/tftpserver.Exe D. https:/www.cisco.com/ftp/ios/tftpserver.EXE

Shouldn't the answer be C and not A as mentioned in the dumps?

passed today with 974/100
dump 222Q, 223Q and 197 still valid
all questions from dumps
just some question wrongly answered in 222Q and 223Q dump

there is new dump 160Q available

Pass today 12-05-2016. dump premium 197q still valid.

Pattern:
57Q
2Hrs (including 30 minutes extra for non native English speaking countries)
Passing score: 846
Secured: 935/1000.


Multiple choice: single and multiple answer questions.
Hot spot (scenario) - 2
Exhibits - 2
ASDM (GUI)

Please share 222q dump.

Hi all, how about 222Q dump file, is it also valid? looks like 197Q dump came after that.

and

do we need to practise the labs for 300-206 in lab/ GNS3 mandatorily? ASDM images (screen shots) at the PDFs are enough to go through?

premium is still valid. In NAT lab question ASA wasnt showing the changes done on ASDM. I couldnt see any in "show xlate", "show nat" and NAT done on show run command neither.
any way i passed.
regards

Premium exam valid, labs 1. Nat and 2. Botnet

i passed today ,197qs still valid

I gave this exam today in India, its 100 % Valid. so Finally i purchased it first time and it saved my money :). now about technical part . I did read all questions/doubts of people here.


UNSUCCESSFUL in preventing a DHCP starvation attack? - is *Source Guard

Dump has almost 99% questions correct. go for it.

Lab was botnet and nat, however in botnet lab - they ask you to view the lof using log viewer of blocking the websites they ask. however the logs are predefined in there and only log of first website are there. but that is sufficient for clearing the lab

passed 9xx with 222q

I am going to give this exam tomorrow, I had purchased this exam. so using 197q dumps. thanks. I will update you everything about this exam once I am through the exam. I hope to pass it.

Pass.. I did it yesterday the Premium VCE still valid

Valid Passed Today wit 9xx

Is the premium still valid?

how many item is the premium file that is valid?

PASS.. yesterday the Premium VCE still valid

Folks

Which configuration on a switch would be UNSUCCESSFUL in preventing a DHCP starvation attack?

*DHCP Snooping
*Port SECURITY
*Rate Limiting
*Source Guard

Answer is SOURCE GUARD.

On Cisco switch running IOS, DHCP snooping is used to prevent starvation. Also, one of the commands is: ip dhcp snooping limit rate , so, rate limiting is also used. On Cisco CatOS, port security is used to prevent DHCP starvation (enable, part max 1, violation restrict, age 2, timer-type inactivity).

Therefore, Source Guard is the only left over option and, as a consequence, the only UNSUCESSFUL in stopping starvation attacks

About the failover interface on ASA 1000v, correct answer is GigabitEthernet0/2. Folks, all of you have correct links, however, remember that ASAv and ASA 1000v are 2 distinct products! For ASA 1000v -> Gig0/2. For ASAv -> Gib0/8. The question is asking for ASA 1000v, therefore, 0/2 is the right answer!

Does anyone know how to get into the CLI for the ASA to run the show commands on this sim??

Does anyone know how to get into the CLI for the ASA to run the show commands on this sim??

hi
I plane to write exam after two days please can anyone tell me what is valid dump and what is the labs and steps to solve labs ..

Premium file 300-206 100% Valid.
Passed April 13th 2016 > Kenya > Nairobi

is it valid?

I have never used paid version of dumps, this is the first time, i just purchased this premium file, Lets see how will it go. I will update you guys in 15 days.

QUESTION 91
When it is configured in accordance to Cisco best practices, the switchport port-security
maximum command can mitigate which two types of Layer 2 attacks? (Choose two.)
A. rogue DHCP servers
B. ARP attacks
C. DHCP starvation
D. MAC spoofing
E. CAM attacks
F. IP spoofing

Premium file is valid

Thank you guys, I pass the 300-206 today using the 222q file and your suggested correct answers.

Go for it guys,Premium dump is still valid on 8 April, 9xx score. cheers!!!

Pased today (923/1000), 197q Premium still valid

Dear Dumps 197Q are 100% valid today i passed exam plus 900 score.

Dear Bret,

I dont have access as i dont have premium account.

197Q still valid. Passed with 923.

Passed today in spain, 197q still válid... PAT and Botnet Sims, many answers wrong correct in this forum!

Passed today in Spain 9xx with 197q premium, Botnet and PAT labs, too many answers wrong... all of them corrects in this forum... use google and study hard!

Good Luck!

Hi Salman, you can get the premium files above if you're a premium member :)

Hello Bret,
where i can find premium file (197Qs), can you please help me ?

Hi CiscoBoy,

I'm not sure if I can do that here since it's premium copy and not free.

Where can I find Lab / Sims for this exam or is it already included in the premium file

Where do we get Sims / Labs for this exam. Is that included in the Premium VCE...

hi bret would u mind sharing the vce file? thanks

Hi Tommi, I used the premium file (197Qs).I prefer to use the premium files rather than failing the exams. It's cheaper to get the membership than re-taking any exam :)

Well, that's me!

Good luck on the exam mate!

hi Bret

Congrats man you passed plz tell me which dumps did you use premium or CAROL.108q.vce

Looking forward for your update

Thanks
Tommi

Guys, I forgot to add. In the PAT lab, you need to select the translated object which has already been created (TRANSLATED-INSIDE-HOST)rather than typing the IP address, else you won't see the NAT output via CLI. Enjoy your exam!

Guys, just passed today 9xx score. All questions are in this dump :)

Hi guys
passed today

the exam only from the 197q

lab was nat/botneck/snmp


good luck guys

Passed the exam, 222Q dump is valid, SIMs are the same PAT & BOTNET, i presume the functionality of the sim screen is limited, after configuration in ASDM, it may not show real time logs or NAT tables - that looks fine.The Console opens by double clicking on the ASA icon in topology.Appreciate the community for sharing comments.Thanks.

@David,

You used the premium 197 q? He's not hot?

Another one from 222q:

QUESTION 211
Which action is considered a best practice for the Cisco ASA firewall?
A. Use threat detection to determine attacks
B. Disable the enable password
C. Disable console logging
D. Enable ICMP permit to monitor the Cisco ASA interfaces
E. Enable logging debug-trace to send debugs to the syslog server

Correct Answer by dump is A

However, I believe right answer should be C: Disable console logging
http://www.cisco.com/c/en/us/about/security-center/firewall-best-practices.html#_Toc332806024

I failed the exam, I studied with this test and I didn't have any question similar.

I take the test in March.. Someone has the new test?

Regards.

Wow. I have failed this twice now: 796 and 836. Very tough exam. Labs and sims are very easy and the reported issues with those seems to have been resolved. Many multiple choice questions I have not seen before. In particular, two on NSEL. Has anyone come across these questions? Can anyone verify that they are on the premium dump?

Wow. I have failed this twice now: 796 and 836. Very tough exam. Labs and sims are very easy and the reported issues with those seems to have been resolved. Many multiple choice questions I have not seen before. In particular, two on NSEL. Has anyone come across these questions? Can anyone verify that they are on the premium dump?

Hello,
I passed today 9xx !!
Premium dump file is valid, but has some answers you have to check ... But I think the best is this 197q premium file !!
Sorry for my Inglish ..
Good Luck

@walaha what is the premium file ???

Passed today with 9xx. Premium VCE is valid but has incorrect answers. NAT/PAT Lab has no console and ASDM real time log viewer output.

Hi all,

Can any one please advise , on the dynamic PAT lab the instructions show to use network 10.10.0.0 /16 but the answers shows 10.0.0.0 /16. Is the answer correct and would I fail the question if I use 10.10.0.0 as given?

On the NAT lab , why do the answer uses the 10.0.0.0 /16 as the IP and not 10.10.0.0 /16 as the instructions require? Will I fail the lab if I use 10.10.0.0 /16

Congrats to @juanma

Keep going all for your hard studying, you are the IT pros of the future!

Hi @all
Any one having the Actual VCE Version? Please helpe, my version is older can no longer Accept the new VCE files, would like to update my CCNP. Thanking you all in advance.

Passed. Problems with sim labs, no results with console, but good.
Practise labs on GNS3 before the exam, or using a real asa, if possible.
Good luck to everybody.
The exam is tough.

Exam is valid, just passed today 910/100

Tell me please in the Botnet sim I must press the button “Fetch Botnet Database”?

Hi Borton.
Which statement about the Cisco ASA configuration is true?
A. All input traffic on the inside interface is denied by the global ACL.
B. All input and output traffic on the outside interface is denied by the global ACL.
C. ICMP echo-request traffic is permitted from the inside to the outside, and ICMP echo-reply will be
permitted from the outside back to inside.
D. HTTP inspection is enabled in the global policy.
E. Traffic between two hosts connected to the same interface is permitted.
Hi Borton.
A is false, because traffic from higher security level to lower is allowed.
C is false, you need icmp inspection for this to work.
D is false, HTTP inspection is disabled by default.
E is false, you need the command same-security-traffic permit intra-interface
So B is the right answer

To get this straight the Premium dump of 197 questions is valid, but some of the answers are incorrect. Can someone please verify this?

What traffic is being captured by the Cisco ASA adaptive security appliance?
A. TCP traffic sourced from host 10.10.0.12 on port 80
B. UDP traffic sourced from host 10.10.0.12 on port 80

---------------

Which URL downloads a copy of packet-capture named "security" residing on a Cisco ASA adaptive
security appliance with IP 10.10.100.11?
A. https://10.10.100.11/capture/security/pcap
B. https://10.10.100.11/capture/security.pcap
---------
Dump says answer is A for both, but i think it should be B for both

would you please inform if 201Q premium dump valid?

Dear all,

can anyone please confirm is the new 197Q premium dump valid?

Here's a NEW question I encountered in my exam:
For management access to the ASA, which ones have limitations on simultaneous sessions?
A. ASDM, Telnet, SSH
B. ASDM, Telnet, SSH, other
C. ASDM, Telnet, SSH, console
D. ASDM, Telnet, SSH, vty

The correct answer seems to be A.

• The ASA allows:
– A maximum of 5 concurrent Telnet connections per context, if available, with a maximum of 100 connections divided among all contexts.
– A maximum of 5 concurrent SSH connections per context, if available, with a maximum of 100 connections divided among all contexts.
– A maximum of 5 concurrent ASDM instances per context, if available, with a maximum of 32 ASDM instances among all contexts.

Regarding the below questions;

Which command is the first that you enter to check whether or not ASDM is installed on the ASA ?

1-show running-config asdm
2-show running-config boot
3-show route
4-show version
5-show ip

show running-config asdm is the correct answer.

Which configuration on a switch would be UNSUCCESSFUL in preventing a DHCP starvation attack?

*DHCP Snooping
*Port Security
*Rate Limiting
*Source Guard

DHCP Snooping, Port Security and IP Source Guard will prevent DHCP starvation attack.

Rate Limiting has no impact on DHCP starvation attack.

Correct answer is Rate Limiting

who knows the answer is B – is correct?

Which statement about the Cisco ASA configuration is true?
A. All input traffic on the inside interface is denied by the global ACL.
B. All input and output traffic on the outside interface is denied by the global ACL.
C. ICMP echo-request traffic is permitted from the inside to the outside, and ICMP echo-reply will be
permitted from the outside back to inside.
D. HTTP inspection is enabled in the global policy.
E. Traffic between two hosts connected to the same interface is permitted.

Congratulations to TheDarkKnight and Gilgamesh for passing the exam. Next week is my turn. Many months studying for this. GNS3 allows you simulating all the labs for this exam.

Passed with 197 questions, the premium file is valid, I scored 9xx, go ahead safely if you want to pass the 300-206 Cisco SENSS exam!

Big salute to @TheDarkKnight for his contributions for the Security track, and happy to be with him in the last step towards (300-208)

Thanks to @juanma from Spain and @abhi from India for their technical help, however show version seemed to be the valid answer.

Now I'm going to write the final exam of CCNP Security "300-208 SISAS" and that should close the chapter called CCNP Security, last not least, will directly work towards the CCIE Security written exam 350-018.

Best luck to all.

Gilgamesh

Tell me, what mistakes in dump 222q and what the right answers?
What are some questions that are not in the dump?

I have faced the exam yesterday and have passed it. I have to say that 222Q dumps are valid, to be precise most of the questions are valid, however the answers provided in the dumps are disturbingly incorrect.
I recommend you to do you own research and use google to find the answers yourself.

For an example in the following question, dumps say the correct answer is B. But in the real exam I have found out that syslog is configured as UDP, which means it will NOT block new connections. Hence the correct answer is E


According to the logging configuration on the Cisco ASA, what will happen if syslog server 10. 10.2.40 fails?
A. New connections through the ASA will be blocked and debug system logs will be sent to the internal buffer.
B. New connections through the ASA will be blocked and informational system logs will be sent to the internal
buffer.
C. New connections through the ASA will be blocked and system logs will be sent to server 10.10.2.41.
D. New connections through the ASA will be allowed and system logs will be sent to server 10. 10.2.41.
E. New connections through the ASA will be allowed and informational system logs will be sent to the internal
buffer.
F. New connections through the ASA will be allowed and debug system logs will be sent to the internal buffer.


Good luck!

Still valid ?

which command is the first that you enter to check whether or not ASDM is installed on the ASA ?

1-show running-config asdm
2-show running-config boot
3-show route
4-show version
5-show ip

My answer: show version. Show run asdm only shows the commands configured, but if the image is not valid for the asa version or it's not copyed to flash, it will be impossible for us to acces the asa via asdm.

show running-config asdm is correct answer.

Another ambiguous question from Cisco Systems:-

which command is the first that you enter to check whether or not ASDM is installed on the ASA ?

1-show running-config asdm
2-show running-config boot
3-show route
4-show version
5-show ip

answer on dump is 4 "show version"

but I do think that show "running-config asdm" is the correct answer!

Kindly share your knowledge with others!

thanks in advance.

Is Q222 dump is valid or not ?

I'm concern little about the below question, kindly help:

which configuration on a switch would be unsuccessful in preventing a DHCP starvation attack ?

*DHCP Snooping
*Port Security
*Rate Limiting
*Source Guard

Answer from AT is: Source Guard

But I do think that DHCP Snooping suites to be more for this tricky question!

Kindly share your answers!

@TheDarkKnight thank you allot for your efforts, your failed try on the exam is counted, you can have another try and sure your will pass, need more hard studying for all kind of the questions.

"SHARING" means you have ONE and the same item being used among multiple entities/tenants.


Which cloud characteristic is used to describe the sharing of physical resource between various entities?

Multitenancy is the CORRECT answer.

The keyword to look at carefully at this question is the word "sharing"

Which cloud characteristic is used to describe the sharing of physical resource between various entities?

If you read and look at the Figure 2 on http://whatiscloud.com/cloud_characteristics/multi_tenancy you will see a resource being SHARED between two entities(tenants). There is NO SHARING of resources in Resiliency. In Resiliency, you have REDUNDANT implementation of the same service.

@TheDarkKnight

Regarding the question about FailOver on ASA 1000V:

http://www.cisco.com/c/en/us/td/docs/security/asa/asa92/asav/quick-start/asav-quick/asav-vmware.pdf

Note: For failover deployments, GigabitEthernet 0/8 is pre-configured as the failover interface.

In a Cisco ASA 1000v failover deployment, which interface is preconfigured as the failover interface?

Answer given on dump: D. GigabitEthernet0/8, is correct.

Link: http://www.cisco.com/c/en/us/td/docs/security/asa/asa92/configuration/general/asa-general-cli/interface-basic-asav.pdf
ASAv Interfaces
The ASAv includes the following Gigabit Ethernet interfaces:
• Management 0/0
• GigabitEthernet 0/0 through 0/8. Note that the GigabitEthernet 0/8 is used for the failover link when
you deploy the ASAv as part of a failover pair.

Which cloud characteristic is used to describe the sharing of physical resource between various entities?

Answer on dump: Resiliency, is correct.

Link: http://whatiscloud.com/cloud_characteristics/resiliency
Resiliency
Resilient computing is a form of failover that distributes redundant implementations of IT resources across physical locations. IT resources can be pre-configured so that if one becomes deficient, processing is automatically handed over to another redundant implementation. Within cloud computing, the characteristic of resiliency can refer to redundant IT resources within the same cloud (but in different physical locations) or across multiple clouds. Cloud consumers can increase both the reliability and availability of their applications by leveraging the resiliency of cloud-based IT resources.

Hi Mark,

Thanks for your comment on (PL) Pass leader, I had the same issue with them before, had purchased a testing exam engine and many questions they offer are totally Invalid!!!!

Just an advice.

Is 197Q valid?

160q is not valid, I failed 22 Feb with score 784, about 35 new questions from total 57 questions. same labs

I’ve failed this exam three times and can’t afford to do it more than one more time.

On the dynamic network object NAT with PAT lab, shouldn’t the Add Network Object IP address be 10.10.0.0/16 or 10.0.0.0/16

in the dump on the screenshot is written 10.0.0.0 255.255.0.0.ru2.gsr.awhoer.net – it’s right or need to write lab 10.10.0.0 255.255.0.0.ru2.gsr.awhoer.net?

Here's another one with a dubious answer.

Which cloud characteristic is used to describe the sharing of physical resource between various entities?

Answer on dump: Resiliency

My Answer: Multitenancy

The third characteristic, Resource pooling, below refers to multitenancy.

NIST identifies five essential characteristics of the cloud, summarized here:

On-demand self-service – A user can provision computing capabilities, such as server time and storage, as needed without requiring human interaction.
Broad network access – Capabilities are available over a network and typically accessed by the users’ mobile phones, tablets, laptops, and workstations.
Resource pooling – The provider’s computing resources are pooled to serve multiple users using a multi-tenant model, with different physical and virtual resources dynamically assigned and reassigned according to consumer demand. Examples of resources include storage, processing, memory, and network bandwidth.
Rapid elasticity – Capabilities can be elastically provisioned and released, in some cases automatically, to scale rapidly outward and inward as needed. For the user, the capabilities available for provisioning often appear to be unlimited and can be appropriated in any quantity at any time.
Measured service – Cloud systems automatically control and optimize resource use by leveraging a metering capability appropriate to the type of service (e.g., storage, processing, bandwidth, and active user accounts). Resource usage can be monitored, controlled, and reported, providing transparency for both the provider and user of the service. This cloud characteristic enables a cloud user to consume the service in a “pay as you grow” model or for internal IT departments to provide IT chargeback capabilities.

In a Cisco ASA 1000v failover deployment, which interface is preconfigured as the failover interface?

Answer given on dump: D. GigabitEthernet0/8

My Answer: A. GigabitEthernet0/2

Failover Overview
Configuring high availability requires two identical ASA 1000Vs connected to each other through a dedicated Stateful Failover link. The two ASA 1000Vs in a failover pair constantly communicate over a failover link to determine the operating status of each one. The health of the active interfaces is monitored to determine if specific failover conditions are met. If those conditions are met, failover occurs.
You can use the GigabitEthernet 0/2 interface on the ASA 1000V as the failover link. The failover link interface is not configured as a normal networking interface; it exists for failover communication only. This interface should only be used for the failover link (and optionally for the Stateful Failover link).

Hey @Mark, you fail solving this questions or following the dump? It's posible to pass the exam with 222q and this review?

Regards!

guys, i m taking the exam on the coming weekend, who is the latest exam taker? and what are their sources for preparing for the exam?

i've only used this dump to prepare, is it enough?

Found another question that could be interpreted differently depending on whether you are running ASA v8.x or 9.x - As per the question about unified ACL's - The config is valid if using ASA v9.x


Q: Which option describes the expected result of the capture ACl?

ACL - access-list cap permit ip any host 192.168.1.5

Answer: The capture is applied and we can see packets in the capture.

Response: This would be a valid answer if the ASA was running v8.x however there is also an answer in the list which references v9.x

Alternate Answer: The capture does not get applied and we get an error about mixed policy.

Explanation - Cisco ASA v9.x doesn't allow this ACE in a capture and throws up an error stating access-list contains mixed policies.

Code Example:


Version 8.X
!
access-list CAPTURE permit ip any host 192.0.2.10
access-list CAPTURE permit ip host 192.0.2.10 any
!
! Version 9.X has separate ACEs for ipv4 and ipv6, if you enter the above you'll get:
! ERROR: Capture doesn't support access-list containing mixed policies
! so, change the ACL to look like this:
!
access-list CAPTURE permit ip any4 host 192.0.2.10
access-list CAPTURE permit ip host 192.0.2.10 any4

Hi Community,

Can someone confirm whether 300-206 160 Questions is valid or not?

I'm planning to schedule my exam next week!

Took the exam today and failed with 825, PL dump has some spurious questions.

Question 105 - Prior to a software upgrade which Cisco Prime Infrastructure feature determines if the devices being upgraded have sufficient RAM to support the new software

Answer on dump is incorrect, should be Upgrade Analysis Report not Software upgrade report

Question 110 - Which statement about Cisco ASA Netflow v9 (NSEL) is true?

Answer on dump is incorrect, should be NSEL track's flow-create, flow-teardown, and flow-denied events, and generates appropriate NSEL data records

Question 203 - What is a different type of secondary VLAN?

Answer on dump is incorrect, promiscuous port belongs to the primary VLAN not the secondary VLAN - Answer should be "Community"

Question 13 - What Cisco Prime infrastructure feature allows you to assign templates to a group of wireless LAN controllers with similar configuration requirements?

Answer on dump appears to be incorrect, as per cisco documentation the answer should be "Controller configuration group" yes you can use a composite template to apply similar changes to devices but doesnt automatically group them, i leant towards controller configuration group which is a valid feature.

Question 87 - This command is used to configure the SNMP server on a Cisco router. Which option is the encryption password for the SNMP server?

Agree with the TheDarkKnight - SNMPv2 looks to be the encryption password.

Example: snmp-server user admin vpn group v3 auth sha letmein priv 3des cisco123

Question 61 - Which statement about this access-list is true?
access-list test extended permit ip 2001:DB5:7::/64 192.168.2.0 255.255.255.0

Again agree with the TheDarkKnight, this is valid with a 6to4 translation but the question doesnt specify what version of code is being run on the ASA

@The Dark Knight
snmp-server user username group-name [remote host [udp-port port]] {v1 | v2c | v3 [encrypted] [auth {md5 | sha} auth-password]} [priv {des | 3des | aes {128 | 192 |256}} privpassword] [access [ipv6 nacl] {acl-number | acl-name}]

Thanks to TheDarkKnight for pointing out the two questionable answers. it does make sense indeed.

PL has just released a 222Q version.
The PL answers to these TWO questions are QUESTIONABLE:

1. Which statement about this access-list is true?
access-list test extended permit ip 2001:DB5:7::/64 192.168.2.0 255.255.255.0

PL answer: D. This access list is not valid and will not work at all.

My answer: A. This access list does not work without 6/4NAT

ASA 9.0(1) code introduced the Unified ACL for IPv4 and IPv6. ACLs now support IPv4 and IPv6 addresses. You can even specify a mix of IPv4 and IPv6 addresses for the source and destination. The any keyword was changed to represent IPv4 and IPv6 traffic. The any4 and any6 keywords were added to represent IPv4-only and IPv6-only traffic, respectively. The IPv6-specific ACLs are deprecated. Existing IPv6 ACLs are migrated to extended ACLs.

2. This command is used to configure the SNMP server on a Cisco router. Which option is the encryption password for the SNMP server?
snmp server user admin group=1 v3 auth sha snmp priv aes 128 snmpv3

PL answer: B. snmp

My answer: D. snmpv3
To me,snmp is the authentication password and not the encryption password.
snmp-server user username group-name {v3 [encrypted]] [auth {md5 | sha]} auth-password [priv
[des | 3des | aes] [128 | 192 | 256] priv-password
Example:
hostname(config)# snmp-server user testuser1 testgroup1 v3 auth md5 testpassword aes 128
mypassword
The auth-password argument (testpassword) specifies the authentication user password. The priv-password argument (mypassword) specifies the encryption user password.
Thoughts?

hi guyz, just passed yesterday. Here CAROL.108q.vce is not vlaid anymore, more than 40 new queston out of this vce. *NEW* How much storage is allotted to maintain system,configuration , and image files on the Cisco ASA 1000V during OVF template file deployment? 2GB. *NEW* Which command is the first that you enter to check whether or not ASDM is installed on the ASA?
Show running-config asdm. Almost all questions are same new questions are from updated leadtopass 222q vce dumps. there are 2 labs. pretty easy and similar. Many Thanks in advance.

Tell me please, the old question of the dump with 160 question - are relevant, they are in the exam?
Please tell me, what new questions.

Thank you!

201 pass leader is not vaid in Turkey. I failed with 763.
LABS are same
but there are too many new multiple choise Qs.
one of them is about disabling globally CDP Answer is no cdp run

Share please reference to the validly dump.

this dump is still relevant, if not, what is relevant?

please i need an urgent feedback is this dumb still valid ???

Is 201q still valid?

I remembered this unified ACL question. ACL like below:
hostname(config)# access-list demoacl extended permit ip 2001:DB8:1::/64 10.2.2.0 255.255.255.0
This was introduced in ASA 9.x code
Correct answer: This works but needs a 64NAT translation

Is 201q still valid?

Hi Amit, good job! :)
Can you please share the VCE you used to study ?

Thanks in advance !

any valid dumps?

Congrats Amit

Can you please share the dumps which you used to pass this exam and provide us the link so that we all can pass this exam

Regards
Hary

any valid dumps?

not valid

hi all,
may i have the latest question?
can any one email to me, thanks a lot!
plastbag1999@gmail.com

300 206 160Q is not valid anymore. Just failed exam today. Please do not appear for this exam till the time a good VCE is out. Please be warned.

DUMPS not valid. failed today with 740. only 10 Question are from this Dumps. more then 30-40 new Questions.

Exam changed...failed today wiht 780. does anyone have new questions..

Please can anyone update about this dumps validity?? r they still valid

Failed today. The exam has changed in a major way. Labs still good though.

exam dump is not valid, 20-30 % new question, i failed with 72%

Failed exam. Its change big time. Only sims valid.

Dump not valid anymore except for SIMs, many new questions which I've not seen in any course material, back to the drawing board......

please any one have new dump for 300-206 send it to my email ah.kheraba@yahoo.com or ah.kheraba@gmail.com
thaks for all

Can someone send me lates vce)?
x4npro@web.de
Many thanks!

Dumps still valid or not

@Miall Could you please send me the new questions and answers for 300-206 (184q) my email is nihao600@gmail.com
I have the exam next Monday :((
Thank you very much!

exam has around 15 new questions. labs are the same.

new PL 184q is not valid. Has a couple of the new ones, but not enough.

Could you please send me the new dump for 300-206... my email is mehmetyilmaz56@yahoo.com
Thank you very much...

Jasek

@Miall Could you please send me the new questions and answers for 300-206... my email is geraldscei@gmail.com
Thank you very much...

PL 184q is new and valid

plz anyone share this here

Thanks
Tommy

Failed today, over 60% of new questions comparing to 160q

any one know dump sites will make update with new questions or what will happend ?

it is possible to have more details of this new test? i pass monday... ;-(
Thank (audits.ip@gmail.com)

160Q dump,still valid?.

160 Questions still valid? Any advise?.

Failed exam today; 160 questions is not valid anymore; sims still the same

Failed today. So many new questions. 160q not valid enough anymore. :(

Dump is no longer vailed just failed exam from Canada (4-5) questions from dump rest all new- sims remain same

failed the exam- its changed

Wrote today exam (Canada) and failed- 4-5 questions from the 160- All questions new netflow/ciscoprime SNMPv3 all new questions etc.. sims has not changed

@fish
it is possible to have more details of this new test? i pass monday... ;-(
Thank (audits.ip@gmail.com)

@fish do you mean the 160 questions dump is not valid ?