Question 390
A leaf learns EVPN prefixes from a neighbor but cannot install remote tenant routes because the received route targets are not imported. The team is preparing a controlled production change and must preserve fabric reachability. Which limitation prevents the team from overgeneralizing this result?
- A working keepalive is not a replacement data path for the vPC peer-link.
- An FHRP cannot repair a host's incorrect default gateway or disconnected Layer 2 segment.
- Expanding import targets indiscriminately can leak routes across security and tenancy boundaries.
- An RP mapping correction will not compensate for broken RPF reachability to the multicast source.
Explanation
Correct Answer
C:Expanding import targets indiscriminately can leak routes across security and tenancy boundaries. MP-BGP session establishment does not guarantee tenant routes will be imported when policy attributes mismatch. The team is preparing a controlled production change and must preserve fabric reachability.
Incorrect Answers
A:A working keepalive is not a replacement data path for the vPC peer-link. This concerns vpc peer-link recovery, not mp-BGP tenant route import.
B:An FHRP cannot repair a host's incorrect default gateway or disconnected Layer 2 segment. This concerns first-hop gateway failover, not mp-BGP tenant route import.
D:An RP mapping correction will not compensate for broken RPF reachability to the multicast source. This concerns PIM multicast rendezvous point, not mp-BGP tenant route import.
Question 391
A contractor must view Nexus interface health but currently has a role that can change routing and security configuration. Security engineering must restore the approved service without relaxing unrelated protection. Which evidence set most directly tests the suspected failure?
- Inspect TACACS+ reachability, AAA method lists, local credentials and access accounting.
- Inspect assigned user roles, AAA server attributes, command authorization and audit logs.
- Inspect DHCP snooping trust configuration, VLAN enrollment, packet drops and server uplink topology.
- Inspect EPG bindings, contracts, subject filters, provider-consumer association and zoning rules.
Explanation
Correct Answer
B:Inspect assigned user roles, AAA server attributes, command authorization and audit logs. These records help distinguish the suspected failure from a superficially similar fault before modifying production. Role-based access control limits administrators to the commands and resources needed for their work. Security engineering must restore the approved service without relaxing unrelated protection.
Incorrect Answers
A:Inspect TACACS+ reachability, AAA method lists, local credentials and access accounting. That response is associated with centralized aaa fallback rather than the specific nx-os administrative rbac condition described here. For the stated failure, the preferred action is: Assign a restricted read-only RBAC role covering the required monitoring commands. Relevant evidence: Inspect assigned user roles, AAA server attributes, command authorization and audit logs. Security engineering must restore the approved service without relaxing unrelated protection.
C:Inspect DHCP snooping trust configuration, VLAN enrollment, packet drops and server uplink topology. This concerns DHCP snooping trusted uplink, not nx-os administrative RBAC.
D:Inspect EPG bindings, contracts, subject filters, provider-consumer association and zoning rules. That response is associated with aci inter-epg contract rather than the specific nx-os administrative rbac condition described here. For the stated failure, the preferred action is: Assign a restricted read-only RBAC role covering the required monitoring commands. Relevant evidence: Inspect assigned user roles, AAA server attributes, command authorization and audit logs. Security engineering must restore the approved service without relaxing unrelated protection.
Question 392
Two MDS switches show divergent fabric-level configuration after an operator changed a distributed feature on only one switch. A storage change board requires a traceable diagnosis before allowing further fabric changes. Which result would best confirm that the remediation worked?
- The target feature configuration is consistent on all intended switches with an auditable committed state.
- Domain IDs become unique and stable, fabric merge completes and attached initiators retain valid paths.
- Only authorized initiators see their allowed storage targets, with unrelated hosts excluded.
- A test fault creates a correctly correlated alert and the affected path recovers without unauthorized zone changes.
Explanation
Correct Answer
A:The target feature configuration is consistent on all intended switches with an auditable committed state. This result tests the original failure rather than reporting merely that the configuration command was accepted. Cisco Fabric Services can distribute feature configuration among fabric switches, subject to feature-specific rules. A storage change board requires a traceable diagnosis before allowing further fabric changes.
Incorrect Answers
B:Domain IDs become unique and stable, fabric merge completes and attached initiators retain valid paths. That response is associated with fcid and domain id stability rather than the specific cisco fabric services distribution condition described here. For the stated failure, the preferred action is: Check the CFS distribution scope and commit or activation workflow for the affected feature. Relevant evidence: Inspect CFS peers, lock ownership, pending changes, feature status and activation records. A storage change board requires a traceable diagnosis before allowing further fabric changes.
C:Only authorized initiators see their allowed storage targets, with unrelated hosts excluded. That response is associated with single-initiator zoning rather than the specific cisco fabric services distribution condition described here. For the stated failure, the preferred action is: Check the CFS distribution scope and commit or activation workflow for the affected feature. Relevant evidence: Inspect CFS peers, lock ownership, pending changes, feature status and activation records. A storage change board requires a traceable diagnosis before allowing further fabric changes.
D:A test fault creates a correctly correlated alert and the affected path recovers without unauthorized zone changes. This concerns nexus dashboard SAN monitoring, not cisco fabric services distribution.
Question 393
An IPv6 fabric link has global IPv6 addresses but no OSPFv3 adjacency after a replacement uplink was enabled. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence. Which controlled change is most appropriate given the evidence?
- Align the OSPF interface area and adjacency parameters on both neighbors before changing routing policy.
- Check the EVPN address family peering and route-type advertisements before altering the VXLAN data plane.
- Correct the L3 VNI and tenant VRF association and check EVPN route import/export on participating VTEPs.
- Verify OSPFv3 is enabled on the intended interface and that IPv6 link-local reachability and area configuration match.
Explanation
Correct Answer
D:Verify OSPFv3 is enabled on the intended interface and that IPv6 link-local reachability and area configuration match. OSPFv3 neighbors communicate over IPv6 link-local addresses and require compatible protocol and area settings. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence.
Incorrect Answers
A:Align the OSPF interface area and adjacency parameters on both neighbors before changing routing policy. This concerns OSPF area compatibility, not ospfv3 IPv6 neighbor discovery.
B:Check the EVPN address family peering and route-type advertisements before altering the VXLAN data plane. This concerns mp-BGP evpn route learning, not ospfv3 IPv6 neighbor discovery.
C:Correct the L3 VNI and tenant VRF association and check EVPN route import/export on participating VTEPs. This concerns evpn vni-to-vrf mapping, not ospfv3 IPv6 neighbor discovery.
Question 394
An administrator assumes every MDS image update is nondisruptive because the switch has redundant supervisors. A storage change board requires a traceable diagnosis before allowing further fabric changes. What information should be inspected before the change is applied?
- Inspect active zoneset, configured zoneset, VSAN ID and activation history.
- Inspect current/target images, supported upgrade matrix, module health and connected-host multipathing.
- Inspect CFS peers, lock ownership, pending changes, feature status and activation records.
- Inspect active zone members, initiator WWPNs, target WWPNs and intended host-to-LUN access matrices.
Explanation
Correct Answer
B:Inspect current/target images, supported upgrade matrix, module health and connected-host multipathing. These records help distinguish the suspected failure from a superficially similar fault before modifying production. SAN nondisruptive upgrade support depends on exact software path, hardware redundancy and active feature constraints. A storage change board requires a traceable diagnosis before allowing further fabric changes.
Incorrect Answers
A:Inspect active zoneset, configured zoneset, VSAN ID and activation history. This concerns zoneset activation state, not mds nondisruptive upgrade planning.
C:Inspect CFS peers, lock ownership, pending changes, feature status and activation records. This concerns cisco fabric services distribution, not mds nondisruptive upgrade planning.
D:Inspect active zone members, initiator WWPNs, target WWPNs and intended host-to-LUN access matrices. This concerns single-initiator zoning, not mds nondisruptive upgrade planning.
Question 395
Network and storage policies appear correct individually, but a newly claimed UCS domain has no effective fabric uplink configuration. The issue reappears on a second managed host, so the team is checking its effective profiles and hardware state. Which explanation most directly accounts for the required correction?
- The effective boot order and accessible target devices determine which source a Cisco server attempts during initialization.
- Intersight Managed Mode applies shared domain-level fabric configuration through domain profiles and associated policies.
- UCS-X in Intersight Managed Mode uses Intersight-defined policies and profiles rather than unmodified UCS Manager assumptions.
- Intersight resource assignment and RBAC limit which infrastructure objects and policies an administrator can manage.
Explanation
Correct Answer
B:Intersight Managed Mode applies shared domain-level fabric configuration through domain profiles and associated policies. The issue reappears on a second managed host, so the team is checking its effective profiles and hardware state.
Incorrect Answers
A:The effective boot order and accessible target devices determine which source a Cisco server attempts during initialization. This concerns c-series boot policy alignment, not intersight domain profile.
C:UCS-X in Intersight Managed Mode uses Intersight-defined policies and profiles rather than unmodified UCS Manager assumptions. This concerns UCS-x intersight managed mode, not intersight domain profile.
D:Intersight resource assignment and RBAC limit which infrastructure objects and policies an administrator can manage. This concerns intersight organization scope, not intersight domain profile.
Question 396
A cloning operation for storage-connected service profiles risks assigning previously reserved WWPNs to replacement blades. Operations is validating the host before approving production workload placement. What is the strongest technical basis for the recommended action?
- Unique WWPN identities let SAN switches and arrays distinguish initiators and apply zoning and masking predictably.
- SAN boot requires all of the initiator, fabric zoning, target presentation and boot policy to agree.
- Intersight Managed Mode applies shared domain-level fabric configuration through domain profiles and associated policies.
- A blade vHBA needs an operational fabric path and correct VSAN association before a fabric login can occur.
Explanation
Correct Answer
A:Unique WWPN identities let SAN switches and arrays distinguish initiators and apply zoning and masking predictably. Operations is validating the host before approving production workload placement.
Incorrect Answers
B:SAN boot requires all of the initiator, fabric zoning, target presentation and boot policy to agree. That response is associated with san boot path policy rather than the specific wwpn pool allocation condition described here. For the stated failure, the preferred action is: Assign WWPNs from a nonoverlapping pool and validate effective per-fabric vHBA identities. Relevant evidence: Inspect WWPN pool reservations, active vHBA identities, fabric login records and zoning references. Operations is validating the host before approving production workload placement.
C:Intersight Managed Mode applies shared domain-level fabric configuration through domain profiles and associated policies. This concerns intersight domain profile, not wwpn pool allocation.
D:A blade vHBA needs an operational fabric path and correct VSAN association before a fabric login can occur. That response is associated with san connectivity from blade chassis rather than the specific wwpn pool allocation condition described here. For the stated failure, the preferred action is: Assign WWPNs from a nonoverlapping pool and validate effective per-fabric vHBA identities. Relevant evidence: Inspect WWPN pool reservations, active vHBA identities, fabric login records and zoning references. Operations is validating the host before approving production workload placement.
Question 397
An MDS operator edits the configured zoneset but a host still cannot discover the newly authorized storage target. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN. What is the best next implementation or troubleshooting step?
- Activate the intended zoneset on the correct VSAN and validate its active membership.
- Apply a least-privilege zoning design with an individual initiator and explicitly approved target members per zone.
- Align interface speed, VSAN mode and compatibility parameters across the intended port-channel members.
- Reconcile FCNS registrations and target identity changes before recreating the entire VSAN.
Explanation
Correct Answer
A:Activate the intended zoneset on the correct VSAN and validate its active membership. Configured zones and active enforced zoning can differ until the appropriate zoneset is activated. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN.
Incorrect Answers
B:Apply a least-privilege zoning design with an individual initiator and explicitly approved target members per zone. This concerns single-initiator zoning, not zoneset activation state.
C:Align interface speed, VSAN mode and compatibility parameters across the intended port-channel members. This concerns fibre channel port-channel consistency, not zoneset activation state.
D:Reconcile FCNS registrations and target identity changes before recreating the entire VSAN. This concerns fibre channel name-server entries, not zoneset activation state.
Question 398
A four-link server port-channel forwards on two members because the other members use incompatible trunk settings. The team is preparing a controlled production change and must preserve fabric reachability. Which qualification should the change record include?
- A working keepalive is not a replacement data path for the vPC peer-link.
- Data-plane tunnel reachability does not imply correct import or export of the tenant's EVPN routes.
- LACP negotiation cannot compensate for incompatible allowed VLAN or switching-mode settings.
- Forcing every redundant port to forward would create a bridging loop rather than improve resilience.
Explanation
Correct Answer
C:LACP negotiation cannot compensate for incompatible allowed VLAN or switching-mode settings. LACP aggregates only compatible interfaces, and inconsistent operational settings can suspend members. The team is preparing a controlled production change and must preserve fabric reachability.
Incorrect Answers
A:A working keepalive is not a replacement data path for the vPC peer-link. That response is associated with vpc peer-link recovery rather than the specific lacp member mismatch condition described here. For the stated failure, the preferred action is: Align the switchport and LACP parameters across members before attempting to force them into the bundle. Relevant evidence: Inspect port-channel summaries, actor/partner keys, VLAN and speed settings and member suspension reasons. The team is preparing a controlled production change and must preserve fabric reachability.
B:Data-plane tunnel reachability does not imply correct import or export of the tenant's EVPN routes. This concerns mp-BGP evpn route learning, not lacp member mismatch.
D:Forcing every redundant port to forward would create a bridging loop rather than improve resilience. That response is associated with rstp blocked uplink rather than the specific lacp member mismatch condition described here. For the stated failure, the preferred action is: Align the switchport and LACP parameters across members before attempting to force them into the bundle. Relevant evidence: Inspect port-channel summaries, actor/partner keys, VLAN and speed settings and member suspension reasons. The team is preparing a controlled production change and must preserve fabric reachability.
Question 399
Switch administrators lose access during a TACACS+ outage because there is no tested, secured local recovery path. A follow-up access review asks the team to validate the same boundary with a controlled negative test. Which technical principle best explains the recommended response?
- IP source validation uses trusted bindings to prevent endpoints from impersonating unassigned source addresses.
- Role-based access control limits administrators to the commands and resources needed for their work.
- ACI contracts control permitted communication between endpoint groups, separate from basic endpoint addressing.
- Remote AAA improves centralized administration but must have an appropriate resilient recovery mechanism.
Explanation
Correct Answer
D:Remote AAA improves centralized administration but must have an appropriate resilient recovery mechanism. A follow-up access review asks the team to validate the same boundary with a controlled negative test.
Incorrect Answers
A:IP source validation uses trusted bindings to prevent endpoints from impersonating unassigned source addresses. This concerns first-hop ip/mac spoof defense, not centralized AAA fallback.
B:Role-based access control limits administrators to the commands and resources needed for their work. This concerns nx-os administrative RBAC, not centralized AAA fallback.
C:ACI contracts control permitted communication between endpoint groups, separate from basic endpoint addressing. This concerns aci inter-epg contract, not centralized AAA fallback.
Question 400
An ACI endpoint attaches to a leaf interface but never receives its expected VLAN encapsulation because the domain is not bound to the access policy chain. The team is preparing a controlled production change and must preserve fabric reachability. What should the engineer do first to address the observed failure?
- Reconcile the VMM domain association, hypervisor inventory and EPG port-group mapping.
- Verify the VLAN pool, domain, AEP and interface policy group associations serving the endpoint port.
- Configure and validate an appropriate first-hop redundancy group with a shared virtual gateway and healthy tracking.
- Validate fabric discovery prerequisites, physical connectivity and node registration in APIC.
Explanation
Correct Answer
B:Verify the VLAN pool, domain, AEP and interface policy group associations serving the endpoint port. ACI access policies rely on a consistent domain and attachment chain before deploying the correct encapsulation. The team is preparing a controlled production change and must preserve fabric reachability.
Incorrect Answers
A:Reconcile the VMM domain association, hypervisor inventory and EPG port-group mapping. That response is associated with aci vmm association rather than the specific aci access policy chain condition described here. For the stated failure, the preferred action is: Verify the VLAN pool, domain, AEP and interface policy group associations serving the endpoint port. Relevant evidence: Inspect VLAN pool allocation, AEP association, domain assignment, policy-group binding and interface faults. The team is preparing a controlled production change and must preserve fabric reachability.
C:Configure and validate an appropriate first-hop redundancy group with a shared virtual gateway and healthy tracking. This concerns first-hop gateway failover, not aci access policy chain.
D:Validate fabric discovery prerequisites, physical connectivity and node registration in APIC. That response is associated with aci fabric discovery rather than the specific aci access policy chain condition described here. For the stated failure, the preferred action is: Verify the VLAN pool, domain, AEP and interface policy group associations serving the endpoint port. Relevant evidence: Inspect VLAN pool allocation, AEP association, domain assignment, policy-group binding and interface faults. The team is preparing a controlled production change and must preserve fabric reachability.
Implementing and Operating Cisco Data Center Core Technologies (DCCOR) (350-601) Practice Tests