Pass Your Juniper JN0-664 Exam Easy!

Juniper JN0-664 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

JN0-664 Premium VCE File

Juniper JN0-664 Premium File

96 Questions & Answers

Last Update: Oct 12, 2026

$69.99

JN0-664 Bundle gives you unlimited access to "JN0-664" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
JN0-664 Premium VCE File
Juniper JN0-664 Premium File

96 Questions & Answers

Last Update: Oct 12, 2026

$69.99

Juniper JN0-664 Exam Bundle gives you unlimited access to "JN0-664" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

Juniper JN0-664 Practice Test 68

Question 670

During a customer VPN change window, an HPE Juniper Networking engineer investigates this situation: A multicast group continues to show (*,G) state but no source traffic arrives after a source moves behind a different first-hop router. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Verify RP discovery and mapping on each receiver POP after configuration changes.
  2. Test source failover and relocation independently of receiver join success.
  3. Test registered-source admission after group-range policy updates.
  4. Maintain a documented multicast addressing and receiver protocol matrix.

Explanation

Correct Answer

B:

Test source failover and relocation independently of receiver join success. The control limits repetition of the described root condition: A healthy receiver shared tree does not prove the RP has discovered a currently active ASM source. During audits, confirm: The RP learns the moved source and traffic begins flowing down the established receiver tree.

Incorrect Answers

A:

Verify RP discovery and mapping on each receiver POP after configuration changes. This is a plausible preventive practice for a different IP Multicast condition, specifically PIM sparse RP mapping absent. PIM sparse mode ASM uses an RP mapping for shared-tree joins before source-specific tree behavior may take over. In this scenario, however, the distinguishing issue is ASM shared-tree source loss and the confirming observation is: The RP learns the moved source and traffic begins flowing down the established receiver tree.

C:

Test registered-source admission after group-range policy updates. This is a plausible preventive practice for a different IP Multicast condition, specifically ASM RP register suppression. RP register acceptance is a control-plane admission point separate from generic unicast route filtering. In this scenario, however, the distinguishing issue is ASM shared-tree source loss and the confirming observation is: The RP learns the moved source and traffic begins flowing down the established receiver tree.

D:

Maintain a documented multicast addressing and receiver protocol matrix. This is a plausible preventive practice for a different IP Multicast condition, specifically Multicast group range mismatch. Multicast source-specific versus any-source behavior is selected by group range and configuration policy. In this scenario, however, the distinguishing issue is ASM shared-tree source loss and the confirming observation is: The RP learns the moved source and traffic begins flowing down the established receiver tree.

Question 671

During an overnight NOC investigation, an HPE Juniper Networking engineer investigates this situation: Receivers across a provider transit fail to obtain multicast packets because the application's IP TTL is smaller than the hop distance. Which targeted check most directly distinguishes the likely cause before a configuration change?

  1. Inspect PIM dense-mode prune and periodic reflood behavior on the branch.
  2. Inspect group-to-RP mapping and the PIM join state on receiver-facing and upstream routers.
  3. Compare the transmitted multicast TTL and hop count across the distribution path.
  4. Inspect PIM neighbor and join state at each transit interface along the RPF path.

Explanation

Correct Answer

C:

Compare the transmitted multicast TTL and hop count across the distribution path. This check examines the decisive condition for Multicast TTL boundary before any unrelated changes are made. The underlying mechanism is: IP multicast forwarding still decrements TTL at routed hops; a packet can expire before distant receivers even with valid PIM state. The confirming observation is: Distant receivers obtain packets with a validated TTL budget and no TTL-expired counter growth.

Incorrect Answers

A:

Inspect PIM dense-mode prune and periodic reflood behavior on the branch. This is a plausible diagnostic check for a different IP Multicast condition, specifically PIM dense-mode prune expiry. Dense mode may periodically refresh distribution and prune state, so temporary unwanted traffic can occur before pruning. In this scenario, however, the distinguishing issue is Multicast TTL boundary and the confirming observation is: Distant receivers obtain packets with a validated TTL budget and no TTL-expired counter growth.

B:

Inspect group-to-RP mapping and the PIM join state on receiver-facing and upstream routers. This is a plausible diagnostic check for a different IP Multicast condition, specifically PIM sparse RP mapping absent. PIM sparse mode ASM uses an RP mapping for shared-tree joins before source-specific tree behavior may take over. In this scenario, however, the distinguishing issue is Multicast TTL boundary and the confirming observation is: Distant receivers obtain packets with a validated TTL budget and no TTL-expired counter growth.

D:

Inspect PIM neighbor and join state at each transit interface along the RPF path. This is a plausible diagnostic check for a different IP Multicast condition, specifically Missing PIM on transit. Multicast routing requires compatible upstream/downstream PIM signaling along the intended distribution path. In this scenario, however, the distinguishing issue is Multicast TTL boundary and the confirming observation is: Distant receivers obtain packets with a validated TTL budget and no TTL-expired counter growth.

Question 672

During a customer service restoration, an HPE Juniper Networking engineer investigates this situation: Receivers across a provider transit fail to obtain multicast packets because the application's IP TTL is smaller than the hop distance. Which routing or service mechanism best explains the reported behavior?

  1. Dense mode may periodically refresh distribution and prune state, so temporary unwanted traffic can occur before pruning.
  2. PIM sparse mode ASM uses an RP mapping for shared-tree joins before source-specific tree behavior may take over.
  3. Multicast routing requires compatible upstream/downstream PIM signaling along the intended distribution path.
  4. IP multicast forwarding still decrements TTL at routed hops; a packet can expire before distant receivers even with valid PIM state.

Explanation

Correct Answer

D:

IP multicast forwarding still decrements TTL at routed hops; a packet can expire before distant receivers even with valid PIM state. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: Distant receivers obtain packets with a validated TTL budget and no TTL-expired counter growth. The targeted correction is: Set an appropriate application TTL under security policy and keep unwanted distribution boundaries explicit.

Incorrect Answers

A:

Dense mode may periodically refresh distribution and prune state, so temporary unwanted traffic can occur before pruning. This is a plausible protocol explanation for a different IP Multicast condition, specifically PIM dense-mode prune expiry. Dense mode may periodically refresh distribution and prune state, so temporary unwanted traffic can occur before pruning. In this scenario, however, the distinguishing issue is Multicast TTL boundary and the confirming observation is: Distant receivers obtain packets with a validated TTL budget and no TTL-expired counter growth.

B:

PIM sparse mode ASM uses an RP mapping for shared-tree joins before source-specific tree behavior may take over. This is a plausible protocol explanation for a different IP Multicast condition, specifically PIM sparse RP mapping absent. PIM sparse mode ASM uses an RP mapping for shared-tree joins before source-specific tree behavior may take over. In this scenario, however, the distinguishing issue is Multicast TTL boundary and the confirming observation is: Distant receivers obtain packets with a validated TTL budget and no TTL-expired counter growth.

C:

Multicast routing requires compatible upstream/downstream PIM signaling along the intended distribution path. This is a plausible protocol explanation for a different IP Multicast condition, specifically Missing PIM on transit. Multicast routing requires compatible upstream/downstream PIM signaling along the intended distribution path. In this scenario, however, the distinguishing issue is Multicast TTL boundary and the confirming observation is: Distant receivers obtain packets with a validated TTL budget and no TTL-expired counter growth.

Question 673

During an edge-to-core validation, an HPE Juniper Networking engineer investigates this situation: Receivers across a provider transit fail to obtain multicast packets because the application's IP TTL is smaller than the hop distance. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?

  1. Distant receivers obtain packets with a validated TTL budget and no TTL-expired counter growth.
  2. Observed flooding aligns with dense-mode refresh behavior instead of indicating a new receiver.
  3. A group-specific RP mapping exists and the (*,G) join reaches the mapped RP.
  4. A PIM neighbor forms and downstream join state propagates after the control traffic is allowed.

Explanation

Correct Answer

A:

Distant receivers obtain packets with a validated TTL budget and no TTL-expired counter growth. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: IP multicast forwarding still decrements TTL at routed hops; a packet can expire before distant receivers even with valid PIM state.

Incorrect Answers

B:

Observed flooding aligns with dense-mode refresh behavior instead of indicating a new receiver. This is a plausible observed evidence for a different IP Multicast condition, specifically PIM dense-mode prune expiry. Dense mode may periodically refresh distribution and prune state, so temporary unwanted traffic can occur before pruning. In this scenario, however, the distinguishing issue is Multicast TTL boundary and the confirming observation is: Distant receivers obtain packets with a validated TTL budget and no TTL-expired counter growth.

C:

A group-specific RP mapping exists and the (*,G) join reaches the mapped RP. This is a plausible observed evidence for a different IP Multicast condition, specifically PIM sparse RP mapping absent. PIM sparse mode ASM uses an RP mapping for shared-tree joins before source-specific tree behavior may take over. In this scenario, however, the distinguishing issue is Multicast TTL boundary and the confirming observation is: Distant receivers obtain packets with a validated TTL budget and no TTL-expired counter growth.

D:

A PIM neighbor forms and downstream join state propagates after the control traffic is allowed. This is a plausible observed evidence for a different IP Multicast condition, specifically PIM hello neighbor dead. PIM neighbor discovery requires compatible Hello exchange on every required multicast-routing link. In this scenario, however, the distinguishing issue is Multicast TTL boundary and the confirming observation is: Distant receivers obtain packets with a validated TTL budget and no TTL-expired counter growth.

Question 674

During a high-availability validation, an HPE Juniper Networking engineer investigates this situation: Receivers across a provider transit fail to obtain multicast packets because the application's IP TTL is smaller than the hop distance. Which response or focused corrective action best addresses this situation without changing unrelated components?

  1. Select sparse mode when the service cannot tolerate periodic uninterested flooding.
  2. Set an appropriate application TTL under security policy and keep unwanted distribution boundaries explicit.
  3. Configure an appropriate reachable RP mapping for the group range.
  4. Enable the intended multicast routing protocol on all required transit interfaces.

Explanation

Correct Answer

B:

Set an appropriate application TTL under security policy and keep unwanted distribution boundaries explicit. The change addresses the root behavior described here: IP multicast forwarding still decrements TTL at routed hops; a packet can expire before distant receivers even with valid PIM state. Verify success with: Distant receivers obtain packets with a validated TTL budget and no TTL-expired counter growth.

Incorrect Answers

A:

Select sparse mode when the service cannot tolerate periodic uninterested flooding. This is a plausible configuration or operational fix for a different IP Multicast condition, specifically PIM dense-mode prune expiry. Dense mode may periodically refresh distribution and prune state, so temporary unwanted traffic can occur before pruning. In this scenario, however, the distinguishing issue is Multicast TTL boundary and the confirming observation is: Distant receivers obtain packets with a validated TTL budget and no TTL-expired counter growth.

C:

Configure an appropriate reachable RP mapping for the group range. This is a plausible configuration or operational fix for a different IP Multicast condition, specifically PIM sparse RP mapping absent. PIM sparse mode ASM uses an RP mapping for shared-tree joins before source-specific tree behavior may take over. In this scenario, however, the distinguishing issue is Multicast TTL boundary and the confirming observation is: Distant receivers obtain packets with a validated TTL budget and no TTL-expired counter growth.

D:

Enable the intended multicast routing protocol on all required transit interfaces. This is a plausible configuration or operational fix for a different IP Multicast condition, specifically Missing PIM on transit. Multicast routing requires compatible upstream/downstream PIM signaling along the intended distribution path. In this scenario, however, the distinguishing issue is Multicast TTL boundary and the confirming observation is: Distant receivers obtain packets with a validated TTL budget and no TTL-expired counter growth.

Question 675

During a Junos routing maintenance review, an HPE Juniper Networking engineer investigates this situation: Receivers across a provider transit fail to obtain multicast packets because the application's IP TTL is smaller than the hop distance. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Compare observed branch load against actual subscriber distribution before accepting dense mode.
  2. Verify RP discovery and mapping on each receiver POP after configuration changes.
  3. Include distant-hop TTL validation in multicast application deployment.
  4. Trace every hop's group state before modifying endpoint subscriptions.

Explanation

Correct Answer

C:

Include distant-hop TTL validation in multicast application deployment. The control limits repetition of the described root condition: IP multicast forwarding still decrements TTL at routed hops; a packet can expire before distant receivers even with valid PIM state. During audits, confirm: Distant receivers obtain packets with a validated TTL budget and no TTL-expired counter growth.

Incorrect Answers

A:

Compare observed branch load against actual subscriber distribution before accepting dense mode. This is a plausible preventive practice for a different IP Multicast condition, specifically PIM dense-mode prune expiry. Dense mode may periodically refresh distribution and prune state, so temporary unwanted traffic can occur before pruning. In this scenario, however, the distinguishing issue is Multicast TTL boundary and the confirming observation is: Distant receivers obtain packets with a validated TTL budget and no TTL-expired counter growth.

B:

Verify RP discovery and mapping on each receiver POP after configuration changes. This is a plausible preventive practice for a different IP Multicast condition, specifically PIM sparse RP mapping absent. PIM sparse mode ASM uses an RP mapping for shared-tree joins before source-specific tree behavior may take over. In this scenario, however, the distinguishing issue is Multicast TTL boundary and the confirming observation is: Distant receivers obtain packets with a validated TTL budget and no TTL-expired counter growth.

D:

Trace every hop's group state before modifying endpoint subscriptions. This is a plausible preventive practice for a different IP Multicast condition, specifically Missing PIM on transit. Multicast routing requires compatible upstream/downstream PIM signaling along the intended distribution path. In this scenario, however, the distinguishing issue is Multicast TTL boundary and the confirming observation is: Distant receivers obtain packets with a validated TTL budget and no TTL-expired counter growth.

Question 676

During a managed service audit, an HPE Juniper Networking engineer investigates this situation: Two multicast distribution paths unexpectedly deliver duplicate source traffic to one receiver after a topology change. Which targeted check most directly distinguishes the likely cause before a configuration change?

  1. Inspect last-hop IGMP query and report counters plus membership timers.
  2. Inspect the unicast best route toward each source and the multicast packet ingress interface after the metric change.
  3. Inspect IGMP version and whether the host can express source filters.
  4. Inspect RPF validation, PIM joins and whether duplicate streams originate upstream rather than from routing itself.

Explanation

Correct Answer

D:

Inspect RPF validation, PIM joins and whether duplicate streams originate upstream rather than from routing itself. This check examines the decisive condition for Multicast packet duplicate delivery before any unrelated changes are made. The underlying mechanism is: A correct RPF distribution tree limits accepted incoming source interfaces; duplicates can indicate source duplication or inconsistent topology. The confirming observation is: A packet capture and forwarding state identify a single accepted (S,G) stream on the intended path.

Incorrect Answers

A:

Inspect last-hop IGMP query and report counters plus membership timers. This is a plausible diagnostic check for a different IP Multicast condition, specifically IGMP membership aging. Last-hop multicast forwarding depends on maintained group membership; missing queries or membership reports can allow entries to expire. In this scenario, however, the distinguishing issue is Multicast packet duplicate delivery and the confirming observation is: A packet capture and forwarding state identify a single accepted (S,G) stream on the intended path.

B:

Inspect the unicast best route toward each source and the multicast packet ingress interface after the metric change. This is a plausible diagnostic check for a different IP Multicast condition, specifically RPF asymmetry after IGP cost change. An IGP change can alter RPF selection, invalidating multicast arriving on an old interface even when unicast service succeeds. In this scenario, however, the distinguishing issue is Multicast packet duplicate delivery and the confirming observation is: A packet capture and forwarding state identify a single accepted (S,G) stream on the intended path.

C:

Inspect IGMP version and whether the host can express source filters. This is a plausible diagnostic check for a different IP Multicast condition, specifically IGMPv2 limitations for SSM. Native IGMPv3 carries source-specific membership information required for straightforward IPv4 SSM subscriptions. In this scenario, however, the distinguishing issue is Multicast packet duplicate delivery and the confirming observation is: A packet capture and forwarding state identify a single accepted (S,G) stream on the intended path.

Question 677

During a network architecture troubleshooting workshop, an HPE Juniper Networking engineer investigates this situation: Two multicast distribution paths unexpectedly deliver duplicate source traffic to one receiver after a topology change. Which routing or service mechanism best explains the reported behavior?

  1. A correct RPF distribution tree limits accepted incoming source interfaces; duplicates can indicate source duplication or inconsistent topology.
  2. Last-hop multicast forwarding depends on maintained group membership; missing queries or membership reports can allow entries to expire.
  3. An IGP change can alter RPF selection, invalidating multicast arriving on an old interface even when unicast service succeeds.
  4. Native IGMPv3 carries source-specific membership information required for straightforward IPv4 SSM subscriptions.

Explanation

Correct Answer

A:

A correct RPF distribution tree limits accepted incoming source interfaces; duplicates can indicate source duplication or inconsistent topology. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: A packet capture and forwarding state identify a single accepted (S,G) stream on the intended path. The targeted correction is: Correct duplicate source output or inconsistent multicast tree and RPF configuration.

Incorrect Answers

B:

Last-hop multicast forwarding depends on maintained group membership; missing queries or membership reports can allow entries to expire. This is a plausible protocol explanation for a different IP Multicast condition, specifically IGMP membership aging. Last-hop multicast forwarding depends on maintained group membership; missing queries or membership reports can allow entries to expire. In this scenario, however, the distinguishing issue is Multicast packet duplicate delivery and the confirming observation is: A packet capture and forwarding state identify a single accepted (S,G) stream on the intended path.

C:

An IGP change can alter RPF selection, invalidating multicast arriving on an old interface even when unicast service succeeds. This is a plausible protocol explanation for a different IP Multicast condition, specifically RPF asymmetry after IGP cost change. An IGP change can alter RPF selection, invalidating multicast arriving on an old interface even when unicast service succeeds. In this scenario, however, the distinguishing issue is Multicast packet duplicate delivery and the confirming observation is: A packet capture and forwarding state identify a single accepted (S,G) stream on the intended path.

D:

Native IGMPv3 carries source-specific membership information required for straightforward IPv4 SSM subscriptions. This is a plausible protocol explanation for a different IP Multicast condition, specifically IGMPv2 limitations for SSM. Native IGMPv3 carries source-specific membership information required for straightforward IPv4 SSM subscriptions. In this scenario, however, the distinguishing issue is Multicast packet duplicate delivery and the confirming observation is: A packet capture and forwarding state identify a single accepted (S,G) stream on the intended path.

Question 678

During an inter-POP failover test, an HPE Juniper Networking engineer investigates this situation: Two multicast distribution paths unexpectedly deliver duplicate source traffic to one receiver after a topology change. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?

  1. The receiver group membership persists through several query cycles and traffic remains delivered.
  2. A packet capture and forwarding state identify a single accepted (S,G) stream on the intended path.
  3. The multicast source ingress matches current RPF route selection and forwarding resumes.
  4. An IGMPv3 (S,G) membership entry appears for the intended source and group.

Explanation

Correct Answer

B:

A packet capture and forwarding state identify a single accepted (S,G) stream on the intended path. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: A correct RPF distribution tree limits accepted incoming source interfaces; duplicates can indicate source duplication or inconsistent topology.

Incorrect Answers

A:

The receiver group membership persists through several query cycles and traffic remains delivered. This is a plausible observed evidence for a different IP Multicast condition, specifically IGMP membership aging. Last-hop multicast forwarding depends on maintained group membership; missing queries or membership reports can allow entries to expire. In this scenario, however, the distinguishing issue is Multicast packet duplicate delivery and the confirming observation is: A packet capture and forwarding state identify a single accepted (S,G) stream on the intended path.

C:

The multicast source ingress matches current RPF route selection and forwarding resumes. This is a plausible observed evidence for a different IP Multicast condition, specifically RPF asymmetry after IGP cost change. An IGP change can alter RPF selection, invalidating multicast arriving on an old interface even when unicast service succeeds. In this scenario, however, the distinguishing issue is Multicast packet duplicate delivery and the confirming observation is: A packet capture and forwarding state identify a single accepted (S,G) stream on the intended path.

D:

An IGMPv3 (S,G) membership entry appears for the intended source and group. This is a plausible observed evidence for a different IP Multicast condition, specifically IGMPv2 limitations for SSM. Native IGMPv3 carries source-specific membership information required for straightforward IPv4 SSM subscriptions. In this scenario, however, the distinguishing issue is Multicast packet duplicate delivery and the confirming observation is: A packet capture and forwarding state identify a single accepted (S,G) stream on the intended path.

Question 679

During a control-plane reliability review, an HPE Juniper Networking engineer investigates this situation: Two multicast distribution paths unexpectedly deliver duplicate source traffic to one receiver after a topology change. Which response or focused corrective action best addresses this situation without changing unrelated components?

  1. Upgrade the receiver to IGMPv3 or use an approved SSM mapping solution where supported.
  2. Restore consistent IGMP querier behavior and receiver report processing.
  3. Correct duplicate source output or inconsistent multicast tree and RPF configuration.
  4. Correct multicast path placement or source RPF design to agree with the intended unicast topology.

Explanation

Correct Answer

C:

Correct duplicate source output or inconsistent multicast tree and RPF configuration. The change addresses the root behavior described here: A correct RPF distribution tree limits accepted incoming source interfaces; duplicates can indicate source duplication or inconsistent topology. Verify success with: A packet capture and forwarding state identify a single accepted (S,G) stream on the intended path.

Incorrect Answers

A:

Upgrade the receiver to IGMPv3 or use an approved SSM mapping solution where supported. This is a plausible configuration or operational fix for a different IP Multicast condition, specifically IGMPv2 limitations for SSM. Native IGMPv3 carries source-specific membership information required for straightforward IPv4 SSM subscriptions. In this scenario, however, the distinguishing issue is Multicast packet duplicate delivery and the confirming observation is: A packet capture and forwarding state identify a single accepted (S,G) stream on the intended path.

B:

Restore consistent IGMP querier behavior and receiver report processing. This is a plausible configuration or operational fix for a different IP Multicast condition, specifically IGMP membership aging. Last-hop multicast forwarding depends on maintained group membership; missing queries or membership reports can allow entries to expire. In this scenario, however, the distinguishing issue is Multicast packet duplicate delivery and the confirming observation is: A packet capture and forwarding state identify a single accepted (S,G) stream on the intended path.

D:

Correct multicast path placement or source RPF design to agree with the intended unicast topology. This is a plausible configuration or operational fix for a different IP Multicast condition, specifically RPF asymmetry after IGP cost change. An IGP change can alter RPF selection, invalidating multicast arriving on an old interface even when unicast service succeeds. In this scenario, however, the distinguishing issue is Multicast packet duplicate delivery and the confirming observation is: A packet capture and forwarding state identify a single accepted (S,G) stream on the intended path.

Question 680

During a service-provider escalation, an HPE Juniper Networking engineer investigates this situation: Two multicast distribution paths unexpectedly deliver duplicate source traffic to one receiver after a topology change. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Check IGMP source-filter capability before migrating a group range to SSM.
  2. Monitor membership table ages during endpoint power-save and VLAN changes.
  3. Include multicast RPF tests in every core metric migration.
  4. Test failover for duplicate packets as well as packet loss.

Explanation

Correct Answer

D:

Test failover for duplicate packets as well as packet loss. The control limits repetition of the described root condition: A correct RPF distribution tree limits accepted incoming source interfaces; duplicates can indicate source duplication or inconsistent topology. During audits, confirm: A packet capture and forwarding state identify a single accepted (S,G) stream on the intended path.

Incorrect Answers

A:

Check IGMP source-filter capability before migrating a group range to SSM. This is a plausible preventive practice for a different IP Multicast condition, specifically IGMPv2 limitations for SSM. Native IGMPv3 carries source-specific membership information required for straightforward IPv4 SSM subscriptions. In this scenario, however, the distinguishing issue is Multicast packet duplicate delivery and the confirming observation is: A packet capture and forwarding state identify a single accepted (S,G) stream on the intended path.

B:

Monitor membership table ages during endpoint power-save and VLAN changes. This is a plausible preventive practice for a different IP Multicast condition, specifically IGMP membership aging. Last-hop multicast forwarding depends on maintained group membership; missing queries or membership reports can allow entries to expire. In this scenario, however, the distinguishing issue is Multicast packet duplicate delivery and the confirming observation is: A packet capture and forwarding state identify a single accepted (S,G) stream on the intended path.

C:

Include multicast RPF tests in every core metric migration. This is a plausible preventive practice for a different IP Multicast condition, specifically RPF asymmetry after IGP cost change. An IGP change can alter RPF selection, invalidating multicast arriving on an old interface even when unicast service succeeds. In this scenario, however, the distinguishing issue is Multicast packet duplicate delivery and the confirming observation is: A packet capture and forwarding state identify a single accepted (S,G) stream on the intended path.


Service Provider Routing and Switching, Professional (JNCIP-SP) (JN0-664) Practice Tests

Purchase Individually

JN0-664 Premium File

Premium File
JN0-664 Premium File
96 Q&A
$76.99$69.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.