Pass Your Juniper JN0-664 Exam Easy!

Juniper JN0-664 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

JN0-664 Premium VCE File

Juniper JN0-664 Premium File

96 Questions & Answers

Last Update: Oct 12, 2026

$69.99

JN0-664 Bundle gives you unlimited access to "JN0-664" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
JN0-664 Premium VCE File
Juniper JN0-664 Premium File

96 Questions & Answers

Last Update: Oct 12, 2026

$69.99

Juniper JN0-664 Exam Bundle gives you unlimited access to "JN0-664" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

Juniper JN0-664 Practice Test 69

Question 680

During a service-provider escalation, an HPE Juniper Networking engineer investigates this situation: Two multicast distribution paths unexpectedly deliver duplicate source traffic to one receiver after a topology change. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Check IGMP source-filter capability before migrating a group range to SSM.
  2. Monitor membership table ages during endpoint power-save and VLAN changes.
  3. Include multicast RPF tests in every core metric migration.
  4. Test failover for duplicate packets as well as packet loss.

Explanation

Correct Answer

D:

Test failover for duplicate packets as well as packet loss. The control limits repetition of the described root condition: A correct RPF distribution tree limits accepted incoming source interfaces; duplicates can indicate source duplication or inconsistent topology. During audits, confirm: A packet capture and forwarding state identify a single accepted (S,G) stream on the intended path.

Incorrect Answers

A:

Check IGMP source-filter capability before migrating a group range to SSM. This is a plausible preventive practice for a different IP Multicast condition, specifically IGMPv2 limitations for SSM. Native IGMPv3 carries source-specific membership information required for straightforward IPv4 SSM subscriptions. In this scenario, however, the distinguishing issue is Multicast packet duplicate delivery and the confirming observation is: A packet capture and forwarding state identify a single accepted (S,G) stream on the intended path.

B:

Monitor membership table ages during endpoint power-save and VLAN changes. This is a plausible preventive practice for a different IP Multicast condition, specifically IGMP membership aging. Last-hop multicast forwarding depends on maintained group membership; missing queries or membership reports can allow entries to expire. In this scenario, however, the distinguishing issue is Multicast packet duplicate delivery and the confirming observation is: A packet capture and forwarding state identify a single accepted (S,G) stream on the intended path.

C:

Include multicast RPF tests in every core metric migration. This is a plausible preventive practice for a different IP Multicast condition, specifically RPF asymmetry after IGP cost change. An IGP change can alter RPF selection, invalidating multicast arriving on an old interface even when unicast service succeeds. In this scenario, however, the distinguishing issue is Multicast packet duplicate delivery and the confirming observation is: A packet capture and forwarding state identify a single accepted (S,G) stream on the intended path.

Question 681

During a core-routing migration rehearsal, an HPE Juniper Networking engineer investigates this situation: Two customers each advertise 10.10.0.0/16 to separate PE VRFs, and the provider must exchange both sets of routes over its MP-BGP core. Which targeted check most directly distinguishes the likely cause before a configuration change?

  1. Inspect each VRF's route distinguisher and the resulting VPN-IPv4 prefix identifiers.
  2. Check which prefixes and RTs are imported into the shared-services and tenant VRFs.
  3. Compare hub/spoke route-target import/export policy with the route distribution topology.
  4. Inspect VPN route/label exchange support between ASBRs and route-target control.

Explanation

Correct Answer

A:

Inspect each VRF's route distinguisher and the resulting VPN-IPv4 prefix identifiers. This check examines the decisive condition for Route distinguisher for overlapping customer routes before any unrelated changes are made. The underlying mechanism is: A route distinguisher makes overlapping customer IPv4 prefixes distinguishable in VPN-IPv4 NLRI, but does not by itself decide route import. The confirming observation is: The core holds separate VPNv4 routes with distinct RDs for the identical customer IPv4 prefix.

Incorrect Answers

B:

Check which prefixes and RTs are imported into the shared-services and tenant VRFs. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically VRF route leaking to shared service. Shared service access requires deliberate selective route leaking, not global RT membership across all tenants. In this scenario, however, the distinguishing issue is Route distinguisher for overlapping customer routes and the confirming observation is: The core holds separate VPNv4 routes with distinct RDs for the identical customer IPv4 prefix.

C:

Compare hub/spoke route-target import/export policy with the route distribution topology. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically VPN hub-and-spoke controlled import. VPN hub-and-spoke restrictions are enforced through route distribution and topology policy, not merely by naming sites branches. In this scenario, however, the distinguishing issue is Route distinguisher for overlapping customer routes and the confirming observation is: The core holds separate VPNv4 routes with distinct RDs for the identical customer IPv4 prefix.

D:

Inspect VPN route/label exchange support between ASBRs and route-target control. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically Interprovider VPN option B. Interprovider option B can exchange labeled VPNv4 routes between ASBRs to extend VPNs across provider domains. In this scenario, however, the distinguishing issue is Route distinguisher for overlapping customer routes and the confirming observation is: The core holds separate VPNv4 routes with distinct RDs for the identical customer IPv4 prefix.

Question 682

During a backbone POP acceptance review, an HPE Juniper Networking engineer investigates this situation: Two customers each advertise 10.10.0.0/16 to separate PE VRFs, and the provider must exchange both sets of routes over its MP-BGP core. Which routing or service mechanism best explains the reported behavior?

  1. Shared service access requires deliberate selective route leaking, not global RT membership across all tenants.
  2. A route distinguisher makes overlapping customer IPv4 prefixes distinguishable in VPN-IPv4 NLRI, but does not by itself decide route import.
  3. VPN hub-and-spoke restrictions are enforced through route distribution and topology policy, not merely by naming sites branches.
  4. Interprovider option B can exchange labeled VPNv4 routes between ASBRs to extend VPNs across provider domains.

Explanation

Correct Answer

B:

A route distinguisher makes overlapping customer IPv4 prefixes distinguishable in VPN-IPv4 NLRI, but does not by itself decide route import. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: The core holds separate VPNv4 routes with distinct RDs for the identical customer IPv4 prefix. The targeted correction is: Configure unique appropriate RDs on each relevant PE routing instance.

Incorrect Answers

A:

Shared service access requires deliberate selective route leaking, not global RT membership across all tenants. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically VRF route leaking to shared service. Shared service access requires deliberate selective route leaking, not global RT membership across all tenants. In this scenario, however, the distinguishing issue is Route distinguisher for overlapping customer routes and the confirming observation is: The core holds separate VPNv4 routes with distinct RDs for the identical customer IPv4 prefix.

C:

VPN hub-and-spoke restrictions are enforced through route distribution and topology policy, not merely by naming sites branches. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically VPN hub-and-spoke controlled import. VPN hub-and-spoke restrictions are enforced through route distribution and topology policy, not merely by naming sites branches. In this scenario, however, the distinguishing issue is Route distinguisher for overlapping customer routes and the confirming observation is: The core holds separate VPNv4 routes with distinct RDs for the identical customer IPv4 prefix.

D:

Interprovider option B can exchange labeled VPNv4 routes between ASBRs to extend VPNs across provider domains. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically Interprovider VPN option B. Interprovider option B can exchange labeled VPNv4 routes between ASBRs to extend VPNs across provider domains. In this scenario, however, the distinguishing issue is Route distinguisher for overlapping customer routes and the confirming observation is: The core holds separate VPNv4 routes with distinct RDs for the identical customer IPv4 prefix.

Question 683

During an overnight NOC investigation, an HPE Juniper Networking engineer investigates this situation: Two customers each advertise 10.10.0.0/16 to separate PE VRFs, and the provider must exchange both sets of routes over its MP-BGP core. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?

  1. Each tenant reaches the authorized DNS prefix but cannot install another tenant's unrelated prefixes.
  2. Branch VRFs lack direct peer branch routes while the hub has the intended forwarding reachability.
  3. The core holds separate VPNv4 routes with distinct RDs for the identical customer IPv4 prefix.
  4. The intended VPNv4 labeled reachability is exchanged at ASBRs with correct tenant import control.

Explanation

Correct Answer

C:

The core holds separate VPNv4 routes with distinct RDs for the identical customer IPv4 prefix. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: A route distinguisher makes overlapping customer IPv4 prefixes distinguishable in VPN-IPv4 NLRI, but does not by itself decide route import.

Incorrect Answers

A:

Each tenant reaches the authorized DNS prefix but cannot install another tenant's unrelated prefixes. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically VRF route leaking to shared service. Shared service access requires deliberate selective route leaking, not global RT membership across all tenants. In this scenario, however, the distinguishing issue is Route distinguisher for overlapping customer routes and the confirming observation is: The core holds separate VPNv4 routes with distinct RDs for the identical customer IPv4 prefix.

B:

Branch VRFs lack direct peer branch routes while the hub has the intended forwarding reachability. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically VPN hub-and-spoke controlled import. VPN hub-and-spoke restrictions are enforced through route distribution and topology policy, not merely by naming sites branches. In this scenario, however, the distinguishing issue is Route distinguisher for overlapping customer routes and the confirming observation is: The core holds separate VPNv4 routes with distinct RDs for the identical customer IPv4 prefix.

D:

The intended VPNv4 labeled reachability is exchanged at ASBRs with correct tenant import control. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically Interprovider VPN option B. Interprovider option B can exchange labeled VPNv4 routes between ASBRs to extend VPNs across provider domains. In this scenario, however, the distinguishing issue is Route distinguisher for overlapping customer routes and the confirming observation is: The core holds separate VPNv4 routes with distinct RDs for the identical customer IPv4 prefix.

Question 684

During a customer service restoration, an HPE Juniper Networking engineer investigates this situation: Two customers each advertise 10.10.0.0/16 to separate PE VRFs, and the provider must exchange both sets of routes over its MP-BGP core. Which response or focused corrective action best addresses this situation without changing unrelated components?

  1. Import only scoped shared-service and return-path routes with appropriate policy.
  2. Implement asymmetric hub/spoke RT exchange and validate hub routing and return paths.
  3. Establish the supported labeled VPN inter-AS peering with strict import/export policies.
  4. Configure unique appropriate RDs on each relevant PE routing instance.

Explanation

Correct Answer

D:

Configure unique appropriate RDs on each relevant PE routing instance. The change addresses the root behavior described here: A route distinguisher makes overlapping customer IPv4 prefixes distinguishable in VPN-IPv4 NLRI, but does not by itself decide route import. Verify success with: The core holds separate VPNv4 routes with distinct RDs for the identical customer IPv4 prefix.

Incorrect Answers

A:

Import only scoped shared-service and return-path routes with appropriate policy. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically VRF route leaking to shared service. Shared service access requires deliberate selective route leaking, not global RT membership across all tenants. In this scenario, however, the distinguishing issue is Route distinguisher for overlapping customer routes and the confirming observation is: The core holds separate VPNv4 routes with distinct RDs for the identical customer IPv4 prefix.

B:

Implement asymmetric hub/spoke RT exchange and validate hub routing and return paths. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically VPN hub-and-spoke controlled import. VPN hub-and-spoke restrictions are enforced through route distribution and topology policy, not merely by naming sites branches. In this scenario, however, the distinguishing issue is Route distinguisher for overlapping customer routes and the confirming observation is: The core holds separate VPNv4 routes with distinct RDs for the identical customer IPv4 prefix.

C:

Establish the supported labeled VPN inter-AS peering with strict import/export policies. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically Interprovider VPN option B. Interprovider option B can exchange labeled VPNv4 routes between ASBRs to extend VPNs across provider domains. In this scenario, however, the distinguishing issue is Route distinguisher for overlapping customer routes and the confirming observation is: The core holds separate VPNv4 routes with distinct RDs for the identical customer IPv4 prefix.

Question 685

During an edge-to-core validation, an HPE Juniper Networking engineer investigates this situation: Two customers each advertise 10.10.0.0/16 to separate PE VRFs, and the provider must exchange both sets of routes over its MP-BGP core. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Check RD uniqueness separately from route target policy when onboarding overlapping tenants.
  2. Test tenant isolation and label forwarding across the AS boundary.
  3. Keep negative cross-tenant tests and a shared-service route inventory.
  4. Test branch-to-branch isolation even when all BGP sessions are healthy.

Explanation

Correct Answer

A:

Check RD uniqueness separately from route target policy when onboarding overlapping tenants. The control limits repetition of the described root condition: A route distinguisher makes overlapping customer IPv4 prefixes distinguishable in VPN-IPv4 NLRI, but does not by itself decide route import. During audits, confirm: The core holds separate VPNv4 routes with distinct RDs for the identical customer IPv4 prefix.

Incorrect Answers

B:

Test tenant isolation and label forwarding across the AS boundary. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically Interprovider VPN option B. Interprovider option B can exchange labeled VPNv4 routes between ASBRs to extend VPNs across provider domains. In this scenario, however, the distinguishing issue is Route distinguisher for overlapping customer routes and the confirming observation is: The core holds separate VPNv4 routes with distinct RDs for the identical customer IPv4 prefix.

C:

Keep negative cross-tenant tests and a shared-service route inventory. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically VRF route leaking to shared service. Shared service access requires deliberate selective route leaking, not global RT membership across all tenants. In this scenario, however, the distinguishing issue is Route distinguisher for overlapping customer routes and the confirming observation is: The core holds separate VPNv4 routes with distinct RDs for the identical customer IPv4 prefix.

D:

Test branch-to-branch isolation even when all BGP sessions are healthy. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically VPN hub-and-spoke controlled import. VPN hub-and-spoke restrictions are enforced through route distribution and topology policy, not merely by naming sites branches. In this scenario, however, the distinguishing issue is Route distinguisher for overlapping customer routes and the confirming observation is: The core holds separate VPNv4 routes with distinct RDs for the identical customer IPv4 prefix.

Question 686

During a multisite network cutover, an HPE Juniper Networking engineer investigates this situation: A VPN customer site advertises a prefix successfully into VPNv4 but another participating site never imports it into the intended VRF. Which targeted check most directly distinguishes the likely cause before a configuration change?

  1. Inspect multicast VPN control-plane signaling and provider multicast transport separately from unicast VRF routes.
  2. Compare exported route targets on the VPNv4 route with the receiving VRF's import policy.
  3. Inspect site-of-origin marking and route rejection at the two PE-to-CE boundaries.
  4. Inspect the remote PE BGP next-hop and MPLS/LDP or RSVP forwarding to that endpoint.

Explanation

Correct Answer

B:

Compare exported route targets on the VPNv4 route with the receiving VRF's import policy. This check examines the decisive condition for Route target export membership before any unrelated changes are made. The underlying mechanism is: Route targets are extended-community policy selectors controlling which VPN routes are imported into customer VRFs. The confirming observation is: The remote route contains an RT accepted by the receiver and appears in the intended VRF.

Incorrect Answers

A:

Inspect multicast VPN control-plane signaling and provider multicast transport separately from unicast VRF routes. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically MVPN receiver routing absent. L3VPN unicast reachability alone does not establish an MVPN multicast distribution tree. In this scenario, however, the distinguishing issue is Route target export membership and the confirming observation is: The remote route contains an RT accepted by the receiver and appears in the intended VRF.

C:

Inspect site-of-origin marking and route rejection at the two PE-to-CE boundaries. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically Site-of-origin multihoming loop. A site-of-origin attribute can prevent a multi-homed VPN site from reimporting routes that originated at that same site. In this scenario, however, the distinguishing issue is Route target export membership and the confirming observation is: The remote route contains an RT accepted by the receiver and appears in the intended VRF.

D:

Inspect the remote PE BGP next-hop and MPLS/LDP or RSVP forwarding to that endpoint. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically MPLS transport label missing. A usable L3VPN data path requires provider transport reachability in addition to customer service route advertisements. In this scenario, however, the distinguishing issue is Route target export membership and the confirming observation is: The remote route contains an RT accepted by the receiver and appears in the intended VRF.

Question 687

During a metro aggregation incident, an HPE Juniper Networking engineer investigates this situation: A VPN customer site advertises a prefix successfully into VPNv4 but another participating site never imports it into the intended VRF. Which routing or service mechanism best explains the reported behavior?

  1. L3VPN unicast reachability alone does not establish an MVPN multicast distribution tree.
  2. A site-of-origin attribute can prevent a multi-homed VPN site from reimporting routes that originated at that same site.
  3. Route targets are extended-community policy selectors controlling which VPN routes are imported into customer VRFs.
  4. A usable L3VPN data path requires provider transport reachability in addition to customer service route advertisements.

Explanation

Correct Answer

C:

Route targets are extended-community policy selectors controlling which VPN routes are imported into customer VRFs. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: The remote route contains an RT accepted by the receiver and appears in the intended VRF. The targeted correction is: Align the approved export RT and receiving import RT policy without broadening tenant access.

Incorrect Answers

A:

L3VPN unicast reachability alone does not establish an MVPN multicast distribution tree. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically MVPN receiver routing absent. L3VPN unicast reachability alone does not establish an MVPN multicast distribution tree. In this scenario, however, the distinguishing issue is Route target export membership and the confirming observation is: The remote route contains an RT accepted by the receiver and appears in the intended VRF.

B:

A site-of-origin attribute can prevent a multi-homed VPN site from reimporting routes that originated at that same site. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically Site-of-origin multihoming loop. A site-of-origin attribute can prevent a multi-homed VPN site from reimporting routes that originated at that same site. In this scenario, however, the distinguishing issue is Route target export membership and the confirming observation is: The remote route contains an RT accepted by the receiver and appears in the intended VRF.

D:

A usable L3VPN data path requires provider transport reachability in addition to customer service route advertisements. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically MPLS transport label missing. A usable L3VPN data path requires provider transport reachability in addition to customer service route advertisements. In this scenario, however, the distinguishing issue is Route target export membership and the confirming observation is: The remote route contains an RT accepted by the receiver and appears in the intended VRF.

Question 688

During a managed service audit, an HPE Juniper Networking engineer investigates this situation: A VPN customer site advertises a prefix successfully into VPNv4 but another participating site never imports it into the intended VRF. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?

  1. The MVPN state and receiver membership form an end-to-end tree carrying the authorized multicast source.
  2. A route tagged for the site is not reintroduced into it via the alternate PE.
  3. Both peers negotiate VPNv4 and exchange the intended customer routes.
  4. The remote route contains an RT accepted by the receiver and appears in the intended VRF.

Explanation

Correct Answer

D:

The remote route contains an RT accepted by the receiver and appears in the intended VRF. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: Route targets are extended-community policy selectors controlling which VPN routes are imported into customer VRFs.

Incorrect Answers

A:

The MVPN state and receiver membership form an end-to-end tree carrying the authorized multicast source. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically MVPN receiver routing absent. L3VPN unicast reachability alone does not establish an MVPN multicast distribution tree. In this scenario, however, the distinguishing issue is Route target export membership and the confirming observation is: The remote route contains an RT accepted by the receiver and appears in the intended VRF.

B:

A route tagged for the site is not reintroduced into it via the alternate PE. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically Site-of-origin multihoming loop. A site-of-origin attribute can prevent a multi-homed VPN site from reimporting routes that originated at that same site. In this scenario, however, the distinguishing issue is Route target export membership and the confirming observation is: The remote route contains an RT accepted by the receiver and appears in the intended VRF.

C:

Both peers negotiate VPNv4 and exchange the intended customer routes. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically MP-BGP VPNv4 family absent. An established BGP session for IPv4 unicast does not automatically enable VPNv4 address-family exchange. In this scenario, however, the distinguishing issue is Route target export membership and the confirming observation is: The remote route contains an RT accepted by the receiver and appears in the intended VRF.

Question 689

During a network architecture troubleshooting workshop, an HPE Juniper Networking engineer investigates this situation: A VPN customer site advertises a prefix successfully into VPNv4 but another participating site never imports it into the intended VRF. Which response or focused corrective action best addresses this situation without changing unrelated components?

  1. Align the approved export RT and receiving import RT policy without broadening tenant access.
  2. Configure supported multicast VPN distribution and receiver/source membership controls.
  3. Set consistent site-of-origin policy across the site's participating attachments.
  4. Enable the appropriate MP-BGP VPN family and related policy on the correct sessions.

Explanation

Correct Answer

A:

Align the approved export RT and receiving import RT policy without broadening tenant access. The change addresses the root behavior described here: Route targets are extended-community policy selectors controlling which VPN routes are imported into customer VRFs. Verify success with: The remote route contains an RT accepted by the receiver and appears in the intended VRF.

Incorrect Answers

B:

Configure supported multicast VPN distribution and receiver/source membership controls. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically MVPN receiver routing absent. L3VPN unicast reachability alone does not establish an MVPN multicast distribution tree. In this scenario, however, the distinguishing issue is Route target export membership and the confirming observation is: The remote route contains an RT accepted by the receiver and appears in the intended VRF.

C:

Set consistent site-of-origin policy across the site's participating attachments. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically Site-of-origin multihoming loop. A site-of-origin attribute can prevent a multi-homed VPN site from reimporting routes that originated at that same site. In this scenario, however, the distinguishing issue is Route target export membership and the confirming observation is: The remote route contains an RT accepted by the receiver and appears in the intended VRF.

D:

Enable the appropriate MP-BGP VPN family and related policy on the correct sessions. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically MP-BGP VPNv4 family absent. An established BGP session for IPv4 unicast does not automatically enable VPNv4 address-family exchange. In this scenario, however, the distinguishing issue is Route target export membership and the confirming observation is: The remote route contains an RT accepted by the receiver and appears in the intended VRF.

Question 690

During an inter-POP failover test, an HPE Juniper Networking engineer investigates this situation: A VPN customer site advertises a prefix successfully into VPNv4 but another participating site never imports it into the intended VRF. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Include multicast-over-VPN traffic tests in multisite service acceptance.
  2. Validate positive and negative intersite route-target import tests.
  3. Test site failover for reflected own-site routes and unintended loops.
  4. Verify each negotiated address family during VPN onboarding.

Explanation

Correct Answer

B:

Validate positive and negative intersite route-target import tests. The control limits repetition of the described root condition: Route targets are extended-community policy selectors controlling which VPN routes are imported into customer VRFs. During audits, confirm: The remote route contains an RT accepted by the receiver and appears in the intended VRF.

Incorrect Answers

A:

Include multicast-over-VPN traffic tests in multisite service acceptance. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically MVPN receiver routing absent. L3VPN unicast reachability alone does not establish an MVPN multicast distribution tree. In this scenario, however, the distinguishing issue is Route target export membership and the confirming observation is: The remote route contains an RT accepted by the receiver and appears in the intended VRF.

C:

Test site failover for reflected own-site routes and unintended loops. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically Site-of-origin multihoming loop. A site-of-origin attribute can prevent a multi-homed VPN site from reimporting routes that originated at that same site. In this scenario, however, the distinguishing issue is Route target export membership and the confirming observation is: The remote route contains an RT accepted by the receiver and appears in the intended VRF.

D:

Verify each negotiated address family during VPN onboarding. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically MP-BGP VPNv4 family absent. An established BGP session for IPv4 unicast does not automatically enable VPNv4 address-family exchange. In this scenario, however, the distinguishing issue is Route target export membership and the confirming observation is: The remote route contains an RT accepted by the receiver and appears in the intended VRF.


Service Provider Routing and Switching, Professional (JNCIP-SP) (JN0-664) Practice Tests

Purchase Individually

JN0-664 Premium File

Premium File
JN0-664 Premium File
96 Q&A
$76.99$69.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.