Pass Your Cisco 350-601 Exam Easy!

Cisco 350-601 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

350-601 Premium Bundle

$74.99

Cisco 350-601 Premium Bundle

350-601 Premium File: 630 Questions & Answers

Last Update: Nov 17, 2026

350-601 Training Course: 143 Video Lectures

350-601 Bundle gives you unlimited access to "350-601" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
Cisco 350-601 Premium Bundle
Cisco 350-601 Premium Bundle

350-601 Premium File: 630 Questions & Answers

Last Update: Nov 17, 2026

350-601 Training Course: 143 Video Lectures

$74.99

350-601 Bundle gives you unlimited access to "350-601" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

Cisco 350-601 Practice Test 3

Question 20

Two MDS switches show divergent fabric-level configuration after an operator changed a distributed feature on only one switch. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN. Which technical principle best explains the recommended response?

  1. Tightly scoped FC zones limit which initiators can discover or communicate with designated targets.
  2. NPV proxies initiator logins through an upstream fabric switch, which must support the required virtual-port logins.
  3. FCID addressing includes a domain component, and domain conflicts can prevent stable fabric formation.
  4. Cisco Fabric Services can distribute feature configuration among fabric switches, subject to feature-specific rules.

Explanation

Correct Answer

D:

Cisco Fabric Services can distribute feature configuration among fabric switches, subject to feature-specific rules. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN.

Incorrect Answers

A:

Tightly scoped FC zones limit which initiators can discover or communicate with designated targets. This concerns single-initiator zoning, not cisco fabric services distribution.

B:

NPV proxies initiator logins through an upstream fabric switch, which must support the required virtual-port logins. This concerns npv uplink fabric services, not cisco fabric services distribution.

C:

FCID addressing includes a domain component, and domain conflicts can prevent stable fabric formation. This concerns fcid and domain id stability, not cisco fabric services distribution.

Question 21

An unauthorized initiator plugs into an available SAN switch port and attempts fabric login using an unapproved WWPN. Security engineering must restore the approved service without relaxing unrelated protection. What information should be inspected before the change is applied?

  1. Inspect port-security policy, learned WWPNs, interface events and attempted fabric logins.
  2. Inspect switch WWN bindings, ISL neighbors, fabric membership and enforcement violation logs.
  3. Inspect UCS role privileges, organization assignments, recent actions and denied command records.
  4. Inspect role definitions, AAA authorization, zone management privileges and administrative audit logs.

Explanation

Correct Answer

A:

Inspect port-security policy, learned WWPNs, interface events and attempted fabric logins. These records help distinguish the suspected failure from a superficially similar fault before modifying production. FC port security can restrict which device WWNs are permitted to connect through designated fabric ports. Security engineering must restore the approved service without relaxing unrelated protection.

Incorrect Answers

B:

Inspect switch WWN bindings, ISL neighbors, fabric membership and enforcement violation logs. That response is associated with fabric binding membership rather than the specific fibre channel port security condition described here. For the stated failure, the preferred action is: Configure approved Fibre Channel port-security bindings and verify rejection of unregistered identities. Relevant evidence: Inspect port-security policy, learned WWPNs, interface events and attempted fabric logins. Security engineering must restore the approved service without relaxing unrelated protection.

C:

Inspect UCS role privileges, organization assignments, recent actions and denied command records. This concerns UCS administrative separation, not fibre channel port security.

D:

Inspect role definitions, AAA authorization, zone management privileges and administrative audit logs. That response is associated with mds san administrative control rather than the specific fibre channel port security condition described here. For the stated failure, the preferred action is: Configure approved Fibre Channel port-security bindings and verify rejection of unregistered identities. Relevant evidence: Inspect port-security policy, learned WWPNs, interface events and attempted fabric logins. Security engineering must restore the approved service without relaxing unrelated protection.

Question 22

A VXLAN VTEP can ping peers but no EVPN address-family neighbor is established and remote MAC/IP routes are absent. The team is preparing a controlled production change and must preserve fabric reachability. What post-change observation gives the strongest evidence of success?

  1. Remote MAC/IP routes appear in the EVPN database and tested inter-VTEP traffic succeeds.
  2. Receivers begin receiving the intended group traffic and multicast routing entries show the expected incoming interface.
  3. All intended links join the same logical bundle and traffic is distributed without individual member flaps.
  4. An OSPFv3 Full adjacency forms and IPv6 prefixes become reachable through the correct next hop.

Explanation

Correct Answer

A:

Remote MAC/IP routes appear in the EVPN database and tested inter-VTEP traffic succeeds. This result tests the original failure rather than reporting merely that the configuration command was accepted. EVPN distributes MAC and IP reachability using MP-BGP; underlay IP reachability alone cannot populate those bindings. The team is preparing a controlled production change and must preserve fabric reachability.

Incorrect Answers

B:

Receivers begin receiving the intended group traffic and multicast routing entries show the expected incoming interface. That response is associated with pim multicast rendezvous point rather than the specific mp-bgp evpn route learning condition described here. For the stated failure, the preferred action is: Check the EVPN address family peering and route-type advertisements before altering the VXLAN data plane. Relevant evidence: Inspect EVPN BGP neighbor state, advertised Type-2 routes, route targets and the corresponding VNI. The team is preparing a controlled production change and must preserve fabric reachability.

C:

All intended links join the same logical bundle and traffic is distributed without individual member flaps. This concerns lacp member mismatch, not mp-BGP evpn route learning.

D:

An OSPFv3 Full adjacency forms and IPv6 prefixes become reachable through the correct next hop. That response is associated with ospfv3 ipv6 neighbor discovery rather than the specific mp-bgp evpn route learning condition described here. For the stated failure, the preferred action is: Check the EVPN address family peering and route-type advertisements before altering the VXLAN data plane. Relevant evidence: Inspect EVPN BGP neighbor state, advertised Type-2 routes, route targets and the corresponding VNI. The team is preparing a controlled production change and must preserve fabric reachability.

Question 23

Two production Nexus peers have drifted in their intended interface templates after unreviewed local commands were applied. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence. Which controlled change is most appropriate given the evidence?

  1. Align the OSPF interface area and adjacency parameters on both neighbors before changing routing policy.
  2. Compare actual configuration to a version-controlled golden baseline and restore approved differences through change control.
  3. Check the EVPN address family peering and route-type advertisements before altering the VXLAN data plane.
  4. Verify OSPFv3 is enabled on the intended interface and that IPv6 link-local reachability and area configuration match.

Explanation

Correct Answer

B:

Compare actual configuration to a version-controlled golden baseline and restore approved differences through change control. Configuration management detects and remediates unauthorized deviations rather than trusting the most recent device state. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence.

Incorrect Answers

A:

Align the OSPF interface area and adjacency parameters on both neighbors before changing routing policy. This concerns OSPF area compatibility, not fabric configuration drift.

C:

Check the EVPN address family peering and route-type advertisements before altering the VXLAN data plane. This concerns mp-BGP evpn route learning, not fabric configuration drift.

D:

Verify OSPFv3 is enabled on the intended interface and that IPv6 link-local reachability and area configuration match. This concerns ospfv3 IPv6 neighbor discovery, not fabric configuration drift.

Question 24

An NX-OS switch logs an uplink failure but an EEM policy intended to notify the NOC never triggers. A scheduled deployment is pending, and the engineer must validate how the script handles this failure condition. What information should be inspected before the change is applied?

  1. Inspect job definition, scheduler timetable, execution status and change-window policy.
  2. Inspect EEM detector configuration, actual syslog message, applet history and action permissions.
  3. Inspect repository history, credential storage, role scope, token rotation and execution audit logs.
  4. Inspect Guest Shell availability, mount mappings, file locations, network access and executed command output.

Explanation

Correct Answer

B:

Inspect EEM detector configuration, actual syslog message, applet history and action permissions. These records help distinguish the suspected failure from a superficially similar fault before modifying production. Embedded Event Manager runs configured actions in response to matching local events and authorization constraints. A scheduled deployment is pending, and the engineer must validate how the script handles this failure condition.

Incorrect Answers

A:

Inspect job definition, scheduler timetable, execution status and change-window policy. This concerns nx-os scheduler jobs, not eem syslog-triggered remediation.

C:

Inspect repository history, credential storage, role scope, token rotation and execution audit logs. This concerns powershell api token security, not eem syslog-triggered remediation.

D:

Inspect Guest Shell availability, mount mappings, file locations, network access and executed command output. This concerns guest shell isolation, not eem syslog-triggered remediation.

Question 25

Two Nexus leaf switches never form an OSPF adjacency after one interface was moved into the backbone while the neighbor still uses a nonbackbone area. The team is preparing a controlled production change and must preserve fabric reachability. Which controlled change is most appropriate given the evidence?

  1. Configure and validate an appropriate first-hop redundancy group with a shared virtual gateway and healthy tracking.
  2. Verify OSPFv3 is enabled on the intended interface and that IPv6 link-local reachability and area configuration match.
  3. Align the OSPF interface area and adjacency parameters on both neighbors before changing routing policy.
  4. Check the EVPN address family peering and route-type advertisements before altering the VXLAN data plane.

Explanation

Correct Answer

C:

Align the OSPF interface area and adjacency parameters on both neighbors before changing routing policy. OSPF neighbors must agree on the area and relevant adjacency parameters to reach Full state and exchange routes correctly. The team is preparing a controlled production change and must preserve fabric reachability.

Incorrect Answers

A:

Configure and validate an appropriate first-hop redundancy group with a shared virtual gateway and healthy tracking. This concerns first-hop gateway failover, not OSPF area compatibility.

B:

Verify OSPFv3 is enabled on the intended interface and that IPv6 link-local reachability and area configuration match. That response is associated with ospfv3 ipv6 neighbor discovery rather than the specific ospf area compatibility condition described here. For the stated failure, the preferred action is: Align the OSPF interface area and adjacency parameters on both neighbors before changing routing policy. Relevant evidence: Inspect neighbor state, interface area assignments, hello parameters and interface MTU on both peers. The team is preparing a controlled production change and must preserve fabric reachability.

D:

Check the EVPN address family peering and route-type advertisements before altering the VXLAN data plane. That response is associated with mp-bgp evpn route learning rather than the specific ospf area compatibility condition described here. For the stated failure, the preferred action is: Align the OSPF interface area and adjacency parameters on both neighbors before changing routing policy. Relevant evidence: Inspect neighbor state, interface area assignments, hello parameters and interface MTU on both peers. The team is preparing a controlled production change and must preserve fabric reachability.

Question 26

A new Fibre Channel host is connected to an MDS switch but never receives a fabric identifier and cannot discover targets. A storage change board requires a traceable diagnosis before allowing further fabric changes. What should the engineer collect before ruling out other causes?

  1. Inspect FC interface state, FLOGI database, initiator WWPN and relevant switch events.
  2. Inspect CFS peers, lock ownership, pending changes, feature status and activation records.
  3. Inspect fcdomain status, assigned domain IDs, ISL events and active FCID allocations.
  4. Inspect SAN port-channel summary, member compatibility results, link speeds and VSAN assignments.

Explanation

Correct Answer

A:

Inspect FC interface state, FLOGI database, initiator WWPN and relevant switch events. These records help distinguish the suspected failure from a superficially similar fault before modifying production. An initiator must complete fabric login and receive an FCID before normal fabric services can identify it. A storage change board requires a traceable diagnosis before allowing further fabric changes.

Incorrect Answers

B:

Inspect CFS peers, lock ownership, pending changes, feature status and activation records. This concerns cisco fabric services distribution, not fibre channel fabric login.

C:

Inspect fcdomain status, assigned domain IDs, ISL events and active FCID allocations. That response is associated with fcid and domain id stability rather than the specific fibre channel fabric login condition described here. For the stated failure, the preferred action is: Validate physical FC link and initiator FLOGI registration before changing storage-array masking. Relevant evidence: Inspect FC interface state, FLOGI database, initiator WWPN and relevant switch events. A storage change board requires a traceable diagnosis before allowing further fabric changes.

D:

Inspect SAN port-channel summary, member compatibility results, link speeds and VSAN assignments. That response is associated with fibre channel port-channel consistency rather than the specific fibre channel fabric login condition described here. For the stated failure, the preferred action is: Validate physical FC link and initiator FLOGI registration before changing storage-array masking. Relevant evidence: Inspect FC interface state, FLOGI database, initiator WWPN and relevant switch events. A storage change board requires a traceable diagnosis before allowing further fabric changes.

Question 27

A new C-Series rack server powers on but its management controller cannot be reached from the secure operations subnet. Operations is validating the host before approving production workload placement. What should the engineer do first to address the observed failure?

  1. Separate the relevant MAC pool ranges and confirm all instantiated identities are unique before attachment.
  2. Align the vNIC template VLAN membership and upstream VLAN allowance across the chosen fabric path.
  3. Validate the CIMC management address, uplink, VLAN and access path before attempting OS deployment.
  4. Review UCS QoS classes and upstream priority handling across the entire network path.

Explanation

Correct Answer

C:

Validate the CIMC management address, uplink, VLAN and access path before attempting OS deployment. The CIMC out-of-band interface requires correctly configured management connectivity independent of the installed server operating system. Operations is validating the host before approving production workload placement.

Incorrect Answers

A:

Separate the relevant MAC pool ranges and confirm all instantiated identities are unique before attachment. This concerns UCS mac pool uniqueness, not UCS c-series cimc reachability.

B:

Align the vNIC template VLAN membership and upstream VLAN allowance across the chosen fabric path. This concerns UCS VLAN pool and template, not UCS c-series cimc reachability.

D:

Review UCS QoS classes and upstream priority handling across the entire network path. This concerns UCS network qos policy, not UCS c-series cimc reachability.

Question 28

A hypervisor installation leaves a virtual media image first in a UCS boot policy, causing repeated setup after power cycles. The issue reappears on a second managed host, so the team is checking its effective profiles and hardware state. Which observations would best validate the initial diagnosis?

  1. Inspect applied boot policy, device enumeration, SAN LUN presentation and boot logs.
  2. Inspect server inventory, qualification criteria, pool membership and association failures.
  3. Inspect parent templates, derived profiles, policy inheritance and pending association changes.
  4. Inspect effective boot order, mapped virtual media state and host boot history.

Explanation

Correct Answer

D:

Inspect effective boot order, mapped virtual media state and host boot history. These records help distinguish the suspected failure from a superficially similar fault before modifying production. A persistent virtual-media boot entry can supersede the production storage or disk target on later restarts. The issue reappears on a second managed host, so the team is checking its effective profiles and hardware state.

Incorrect Answers

A:

Inspect applied boot policy, device enumeration, SAN LUN presentation and boot logs. This concerns c-series boot policy alignment, not boot order and removable media.

B:

Inspect server inventory, qualification criteria, pool membership and association failures. This concerns server pool qualification, not boot order and removable media.

C:

Inspect parent templates, derived profiles, policy inheritance and pending association changes. This concerns updating service-profile templates, not boot order and removable media.

Question 29

An infrastructure engineer changes a Nexus policy directly in production and an upcoming Terraform apply attempts to revert it unexpectedly. The automation change must pass a preproduction test and leave a verifiable audit trail. Which result would best confirm that the remediation worked?

  1. The approved plan contains only intended changes and apply converges without surprising production reversions.
  2. The authorized profile is created with valid visible policy references and its deployment succeeds.
  3. The job succeeds using protected credentials while committed scripts contain no reusable secret material.
  4. A second run against an unchanged fabric reports no material differences and service tests remain stable.

Explanation

Correct Answer

A:

The approved plan contains only intended changes and apply converges without surprising production reversions. This result tests the original failure rather than reporting merely that the configuration command was accepted. Terraform compares declared infrastructure with observed resources and can undo unmanaged changes during apply. The automation change must pass a preproduction test and leave a verifiable audit trail.

Incorrect Answers

B:

The authorized profile is created with valid visible policy references and its deployment succeeds. That response is associated with intersight policy automation rather than the specific terraform plan and state condition described here. For the stated failure, the preferred action is: Reconcile the approved desired configuration and actual state using plan review and controlled state management. Relevant evidence: Inspect version-controlled declarations, current plan, state backend locks and out-of-band change record. The automation change must pass a preproduction test and leave a verifiable audit trail.

C:

The job succeeds using protected credentials while committed scripts contain no reusable secret material. That response is associated with powershell api token security rather than the specific terraform plan and state condition described here. For the stated failure, the preferred action is: Reconcile the approved desired configuration and actual state using plan review and controlled state management. Relevant evidence: Inspect version-controlled declarations, current plan, state backend locks and out-of-band change record. The automation change must pass a preproduction test and leave a verifiable audit trail.

D:

A second run against an unchanged fabric reports no material differences and service tests remain stable. This concerns ansible idempotent templates, not terraform plan and state.

Question 30

An administrator imports a service-profile template and two new server identities unexpectedly request an overlapping MAC range. The issue reappears on a second managed host, so the team is checking its effective profiles and hardware state. What is the best next implementation or troubleshooting step?

  1. Separate the relevant MAC pool ranges and confirm all instantiated identities are unique before attachment.
  2. Align the vNIC template VLAN membership and upstream VLAN allowance across the chosen fabric path.
  3. Validate that fabric A and fabric B interfaces have independent working uplinks and correctly bound vNICs.
  4. Review UCS QoS classes and upstream priority handling across the entire network path.

Explanation

Correct Answer

A:

Separate the relevant MAC pool ranges and confirm all instantiated identities are unique before attachment. UCS identity pools must avoid reuse because overlapping MAC addresses can cause Layer 2 instability and confusing endpoint learning. The issue reappears on a second managed host, so the team is checking its effective profiles and hardware state.

Incorrect Answers

B:

Align the vNIC template VLAN membership and upstream VLAN allowance across the chosen fabric path. This concerns UCS VLAN pool and template, not UCS mac pool uniqueness.

C:

Validate that fabric A and fabric B interfaces have independent working uplinks and correctly bound vNICs. This concerns UCS fabric redundancy, not UCS mac pool uniqueness.

D:

Review UCS QoS classes and upstream priority handling across the entire network path. This concerns UCS network qos policy, not UCS mac pool uniqueness.


Implementing and Operating Cisco Data Center Core Technologies (DCCOR) (350-601) Practice Tests

Purchase Individually

350-601 Premium File

Premium File
350-601 Premium File
630 Q&A
$76.99$69.99

350-601 Training Video Course

Training Course
350-601 Training Video Course
143 Lectures
$27.49$24.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.