Pass Your Juniper JN0-664 Exam Easy!

Juniper JN0-664 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

JN0-664 Premium VCE File

Juniper JN0-664 Premium File

96 Questions & Answers

Last Update: Oct 12, 2026

$69.99

JN0-664 Bundle gives you unlimited access to "JN0-664" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
JN0-664 Premium VCE File
Juniper JN0-664 Premium File

96 Questions & Answers

Last Update: Oct 12, 2026

$69.99

Juniper JN0-664 Exam Bundle gives you unlimited access to "JN0-664" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

Juniper JN0-664 Practice Test 74

Question 730

During a customer service restoration, an HPE Juniper Networking engineer investigates this situation: A PE receives a VPNv4 route through a reflector but marks it hidden because the advertising PE loopback is absent from underlay reachability. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Verify each negotiated address family during VPN onboarding.
  2. Watch hidden VPN routes and underlay route loss together.
  3. Test reflected VPN routes between PEs across both reflector failure domains.
  4. Include multicast-over-VPN traffic tests in multisite service acceptance.

Explanation

Correct Answer

B:

Watch hidden VPN routes and underlay route loss together. The control limits repetition of the described root condition: VPN control-plane reachability is not enough; the remote PE next hop must resolve to a usable provider transport path. During audits, confirm: The remote PE loopback is reachable through labeled transport and the VPN route becomes usable.

Incorrect Answers

A:

Verify each negotiated address family during VPN onboarding. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically MP-BGP VPNv4 family absent. An established BGP session for IPv4 unicast does not automatically enable VPNv4 address-family exchange. In this scenario, however, the distinguishing issue is VPN next-hop not reachable and the confirming observation is: The remote PE loopback is reachable through labeled transport and the VPN route becomes usable.

C:

Test reflected VPN routes between PEs across both reflector failure domains. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically VPN route reflector family support. A route reflector can distribute VPN-IPv4 NLRI without hosting every customer's VRF, provided the proper family and policy exist. In this scenario, however, the distinguishing issue is VPN next-hop not reachable and the confirming observation is: The remote PE loopback is reachable through labeled transport and the VPN route becomes usable.

D:

Include multicast-over-VPN traffic tests in multisite service acceptance. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically MVPN receiver routing absent. L3VPN unicast reachability alone does not establish an MVPN multicast distribution tree. In this scenario, however, the distinguishing issue is VPN next-hop not reachable and the confirming observation is: The remote PE loopback is reachable through labeled transport and the VPN route becomes usable.

Question 731

During a Junos routing maintenance review, an HPE Juniper Networking engineer investigates this situation: A dual-homed customer site learns back its own route through another PE and creates a customer-site loop risk. Which targeted check most directly distinguishes the likely cause before a configuration change?

  1. Inspect multicast VPN control-plane signaling and provider multicast transport separately from unicast VRF routes.
  2. Inspect the static route's active state inside the correct VRF and its VPN export policy.
  3. Inspect site-of-origin marking and route rejection at the two PE-to-CE boundaries.
  4. Compare exported route targets on the VPNv4 route with the receiving VRF's import policy.

Explanation

Correct Answer

C:

Inspect site-of-origin marking and route rejection at the two PE-to-CE boundaries. This check examines the decisive condition for Site-of-origin multihoming loop before any unrelated changes are made. The underlying mechanism is: A site-of-origin attribute can prevent a multi-homed VPN site from reimporting routes that originated at that same site. The confirming observation is: A route tagged for the site is not reintroduced into it via the alternate PE.

Incorrect Answers

A:

Inspect multicast VPN control-plane signaling and provider multicast transport separately from unicast VRF routes. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically MVPN receiver routing absent. L3VPN unicast reachability alone does not establish an MVPN multicast distribution tree. In this scenario, however, the distinguishing issue is Site-of-origin multihoming loop and the confirming observation is: A route tagged for the site is not reintroduced into it via the alternate PE.

B:

Inspect the static route's active state inside the correct VRF and its VPN export policy. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically PE-CE static route fallback. VRF-local static routing and advertising that route into VPNv4 are separate actions. In this scenario, however, the distinguishing issue is Site-of-origin multihoming loop and the confirming observation is: A route tagged for the site is not reintroduced into it via the alternate PE.

D:

Compare exported route targets on the VPNv4 route with the receiving VRF's import policy. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically Route target export membership. Route targets are extended-community policy selectors controlling which VPN routes are imported into customer VRFs. In this scenario, however, the distinguishing issue is Site-of-origin multihoming loop and the confirming observation is: A route tagged for the site is not reintroduced into it via the alternate PE.

Question 732

During a multisite network cutover, an HPE Juniper Networking engineer investigates this situation: A dual-homed customer site learns back its own route through another PE and creates a customer-site loop risk. Which routing or service mechanism best explains the reported behavior?

  1. Route targets are extended-community policy selectors controlling which VPN routes are imported into customer VRFs.
  2. L3VPN unicast reachability alone does not establish an MVPN multicast distribution tree.
  3. VRF-local static routing and advertising that route into VPNv4 are separate actions.
  4. A site-of-origin attribute can prevent a multi-homed VPN site from reimporting routes that originated at that same site.

Explanation

Correct Answer

D:

A site-of-origin attribute can prevent a multi-homed VPN site from reimporting routes that originated at that same site. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: A route tagged for the site is not reintroduced into it via the alternate PE. The targeted correction is: Set consistent site-of-origin policy across the site's participating attachments.

Incorrect Answers

A:

Route targets are extended-community policy selectors controlling which VPN routes are imported into customer VRFs. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically Route target export membership. Route targets are extended-community policy selectors controlling which VPN routes are imported into customer VRFs. In this scenario, however, the distinguishing issue is Site-of-origin multihoming loop and the confirming observation is: A route tagged for the site is not reintroduced into it via the alternate PE.

B:

L3VPN unicast reachability alone does not establish an MVPN multicast distribution tree. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically MVPN receiver routing absent. L3VPN unicast reachability alone does not establish an MVPN multicast distribution tree. In this scenario, however, the distinguishing issue is Site-of-origin multihoming loop and the confirming observation is: A route tagged for the site is not reintroduced into it via the alternate PE.

C:

VRF-local static routing and advertising that route into VPNv4 are separate actions. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically PE-CE static route fallback. VRF-local static routing and advertising that route into VPNv4 are separate actions. In this scenario, however, the distinguishing issue is Site-of-origin multihoming loop and the confirming observation is: A route tagged for the site is not reintroduced into it via the alternate PE.

Question 733

During a metro aggregation incident, an HPE Juniper Networking engineer investigates this situation: A dual-homed customer site learns back its own route through another PE and creates a customer-site loop risk. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?

  1. A route tagged for the site is not reintroduced into it via the alternate PE.
  2. The remote route contains an RT accepted by the receiver and appears in the intended VRF.
  3. The MVPN state and receiver membership form an end-to-end tree carrying the authorized multicast source.
  4. The local static prefix appears in the remote site after a targeted VPN export policy permits it.

Explanation

Correct Answer

A:

A route tagged for the site is not reintroduced into it via the alternate PE. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: A site-of-origin attribute can prevent a multi-homed VPN site from reimporting routes that originated at that same site.

Incorrect Answers

B:

The remote route contains an RT accepted by the receiver and appears in the intended VRF. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically Route target export membership. Route targets are extended-community policy selectors controlling which VPN routes are imported into customer VRFs. In this scenario, however, the distinguishing issue is Site-of-origin multihoming loop and the confirming observation is: A route tagged for the site is not reintroduced into it via the alternate PE.

C:

The MVPN state and receiver membership form an end-to-end tree carrying the authorized multicast source. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically MVPN receiver routing absent. L3VPN unicast reachability alone does not establish an MVPN multicast distribution tree. In this scenario, however, the distinguishing issue is Site-of-origin multihoming loop and the confirming observation is: A route tagged for the site is not reintroduced into it via the alternate PE.

D:

The local static prefix appears in the remote site after a targeted VPN export policy permits it. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically PE-CE static route fallback. VRF-local static routing and advertising that route into VPNv4 are separate actions. In this scenario, however, the distinguishing issue is Site-of-origin multihoming loop and the confirming observation is: A route tagged for the site is not reintroduced into it via the alternate PE.

Question 734

During a managed service audit, an HPE Juniper Networking engineer investigates this situation: A dual-homed customer site learns back its own route through another PE and creates a customer-site loop risk. Which response or focused corrective action best addresses this situation without changing unrelated components?

  1. Align the approved export RT and receiving import RT policy without broadening tenant access.
  2. Set consistent site-of-origin policy across the site's participating attachments.
  3. Configure supported multicast VPN distribution and receiver/source membership controls.
  4. Export only approved static routes from the appropriate VRF.

Explanation

Correct Answer

B:

Set consistent site-of-origin policy across the site's participating attachments. The change addresses the root behavior described here: A site-of-origin attribute can prevent a multi-homed VPN site from reimporting routes that originated at that same site. Verify success with: A route tagged for the site is not reintroduced into it via the alternate PE.

Incorrect Answers

A:

Align the approved export RT and receiving import RT policy without broadening tenant access. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically Route target export membership. Route targets are extended-community policy selectors controlling which VPN routes are imported into customer VRFs. In this scenario, however, the distinguishing issue is Site-of-origin multihoming loop and the confirming observation is: A route tagged for the site is not reintroduced into it via the alternate PE.

C:

Configure supported multicast VPN distribution and receiver/source membership controls. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically MVPN receiver routing absent. L3VPN unicast reachability alone does not establish an MVPN multicast distribution tree. In this scenario, however, the distinguishing issue is Site-of-origin multihoming loop and the confirming observation is: A route tagged for the site is not reintroduced into it via the alternate PE.

D:

Export only approved static routes from the appropriate VRF. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically PE-CE static route fallback. VRF-local static routing and advertising that route into VPNv4 are separate actions. In this scenario, however, the distinguishing issue is Site-of-origin multihoming loop and the confirming observation is: A route tagged for the site is not reintroduced into it via the alternate PE.

Question 735

During a network architecture troubleshooting workshop, an HPE Juniper Networking engineer investigates this situation: A dual-homed customer site learns back its own route through another PE and creates a customer-site loop risk. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Validate positive and negative intersite route-target import tests.
  2. Include multicast-over-VPN traffic tests in multisite service acceptance.
  3. Test site failover for reflected own-site routes and unintended loops.
  4. Keep static reachability and export acceptance as distinct turn-up tests.

Explanation

Correct Answer

C:

Test site failover for reflected own-site routes and unintended loops. The control limits repetition of the described root condition: A site-of-origin attribute can prevent a multi-homed VPN site from reimporting routes that originated at that same site. During audits, confirm: A route tagged for the site is not reintroduced into it via the alternate PE.

Incorrect Answers

A:

Validate positive and negative intersite route-target import tests. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically Route target export membership. Route targets are extended-community policy selectors controlling which VPN routes are imported into customer VRFs. In this scenario, however, the distinguishing issue is Site-of-origin multihoming loop and the confirming observation is: A route tagged for the site is not reintroduced into it via the alternate PE.

B:

Include multicast-over-VPN traffic tests in multisite service acceptance. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically MVPN receiver routing absent. L3VPN unicast reachability alone does not establish an MVPN multicast distribution tree. In this scenario, however, the distinguishing issue is Site-of-origin multihoming loop and the confirming observation is: A route tagged for the site is not reintroduced into it via the alternate PE.

D:

Keep static reachability and export acceptance as distinct turn-up tests. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically PE-CE static route fallback. VRF-local static routing and advertising that route into VPNv4 are separate actions. In this scenario, however, the distinguishing issue is Site-of-origin multihoming loop and the confirming observation is: A route tagged for the site is not reintroduced into it via the alternate PE.

Question 736

During a service-provider escalation, an HPE Juniper Networking engineer investigates this situation: A provider must ensure branch VPN sites exchange traffic only through a central hub, but branches currently import each other's routes directly. Which targeted check most directly distinguishes the likely cause before a configuration change?

  1. Check which prefixes and RTs are imported into the shared-services and tenant VRFs.
  2. Inspect each VRF's route distinguisher and the resulting VPN-IPv4 prefix identifiers.
  3. Inspect RT imports and whether every authorized site can learn all other site prefixes.
  4. Compare hub/spoke route-target import/export policy with the route distribution topology.

Explanation

Correct Answer

D:

Compare hub/spoke route-target import/export policy with the route distribution topology. This check examines the decisive condition for VPN hub-and-spoke controlled import before any unrelated changes are made. The underlying mechanism is: VPN hub-and-spoke restrictions are enforced through route distribution and topology policy, not merely by naming sites branches. The confirming observation is: Branch VRFs lack direct peer branch routes while the hub has the intended forwarding reachability.

Incorrect Answers

A:

Check which prefixes and RTs are imported into the shared-services and tenant VRFs. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically VRF route leaking to shared service. Shared service access requires deliberate selective route leaking, not global RT membership across all tenants. In this scenario, however, the distinguishing issue is VPN hub-and-spoke controlled import and the confirming observation is: Branch VRFs lack direct peer branch routes while the hub has the intended forwarding reachability.

B:

Inspect each VRF's route distinguisher and the resulting VPN-IPv4 prefix identifiers. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically Route distinguisher for overlapping customer routes. A route distinguisher makes overlapping customer IPv4 prefixes distinguishable in VPN-IPv4 NLRI, but does not by itself decide route import. In this scenario, however, the distinguishing issue is VPN hub-and-spoke controlled import and the confirming observation is: Branch VRFs lack direct peer branch routes while the hub has the intended forwarding reachability.

C:

Inspect RT imports and whether every authorized site can learn all other site prefixes. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically Full-mesh VPN routing. A full-mesh L3VPN needs an appropriate route distribution relationship among all participating VRFs. In this scenario, however, the distinguishing issue is VPN hub-and-spoke controlled import and the confirming observation is: Branch VRFs lack direct peer branch routes while the hub has the intended forwarding reachability.

Question 737

During a new PE-router service turn-up, an HPE Juniper Networking engineer investigates this situation: A provider must ensure branch VPN sites exchange traffic only through a central hub, but branches currently import each other's routes directly. Which routing or service mechanism best explains the reported behavior?

  1. VPN hub-and-spoke restrictions are enforced through route distribution and topology policy, not merely by naming sites branches.
  2. Shared service access requires deliberate selective route leaking, not global RT membership across all tenants.
  3. A route distinguisher makes overlapping customer IPv4 prefixes distinguishable in VPN-IPv4 NLRI, but does not by itself decide route import.
  4. A full-mesh L3VPN needs an appropriate route distribution relationship among all participating VRFs.

Explanation

Correct Answer

A:

VPN hub-and-spoke restrictions are enforced through route distribution and topology policy, not merely by naming sites branches. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: Branch VRFs lack direct peer branch routes while the hub has the intended forwarding reachability. The targeted correction is: Implement asymmetric hub/spoke RT exchange and validate hub routing and return paths.

Incorrect Answers

B:

Shared service access requires deliberate selective route leaking, not global RT membership across all tenants. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically VRF route leaking to shared service. Shared service access requires deliberate selective route leaking, not global RT membership across all tenants. In this scenario, however, the distinguishing issue is VPN hub-and-spoke controlled import and the confirming observation is: Branch VRFs lack direct peer branch routes while the hub has the intended forwarding reachability.

C:

A route distinguisher makes overlapping customer IPv4 prefixes distinguishable in VPN-IPv4 NLRI, but does not by itself decide route import. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically Route distinguisher for overlapping customer routes. A route distinguisher makes overlapping customer IPv4 prefixes distinguishable in VPN-IPv4 NLRI, but does not by itself decide route import. In this scenario, however, the distinguishing issue is VPN hub-and-spoke controlled import and the confirming observation is: Branch VRFs lack direct peer branch routes while the hub has the intended forwarding reachability.

D:

A full-mesh L3VPN needs an appropriate route distribution relationship among all participating VRFs. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically Full-mesh VPN routing. A full-mesh L3VPN needs an appropriate route distribution relationship among all participating VRFs. In this scenario, however, the distinguishing issue is VPN hub-and-spoke controlled import and the confirming observation is: Branch VRFs lack direct peer branch routes while the hub has the intended forwarding reachability.

Question 738

During a customer VPN change window, an HPE Juniper Networking engineer investigates this situation: A provider must ensure branch VPN sites exchange traffic only through a central hub, but branches currently import each other's routes directly. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?

  1. Each tenant reaches the authorized DNS prefix but cannot install another tenant's unrelated prefixes.
  2. Branch VRFs lack direct peer branch routes while the hub has the intended forwarding reachability.
  3. The core holds separate VPNv4 routes with distinct RDs for the identical customer IPv4 prefix.
  4. Every authorized site has the intended remote site routes without unwanted tenant routes.

Explanation

Correct Answer

B:

Branch VRFs lack direct peer branch routes while the hub has the intended forwarding reachability. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: VPN hub-and-spoke restrictions are enforced through route distribution and topology policy, not merely by naming sites branches.

Incorrect Answers

A:

Each tenant reaches the authorized DNS prefix but cannot install another tenant's unrelated prefixes. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically VRF route leaking to shared service. Shared service access requires deliberate selective route leaking, not global RT membership across all tenants. In this scenario, however, the distinguishing issue is VPN hub-and-spoke controlled import and the confirming observation is: Branch VRFs lack direct peer branch routes while the hub has the intended forwarding reachability.

C:

The core holds separate VPNv4 routes with distinct RDs for the identical customer IPv4 prefix. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically Route distinguisher for overlapping customer routes. A route distinguisher makes overlapping customer IPv4 prefixes distinguishable in VPN-IPv4 NLRI, but does not by itself decide route import. In this scenario, however, the distinguishing issue is VPN hub-and-spoke controlled import and the confirming observation is: Branch VRFs lack direct peer branch routes while the hub has the intended forwarding reachability.

D:

Every authorized site has the intended remote site routes without unwanted tenant routes. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically Full-mesh VPN routing. A full-mesh L3VPN needs an appropriate route distribution relationship among all participating VRFs. In this scenario, however, the distinguishing issue is VPN hub-and-spoke controlled import and the confirming observation is: Branch VRFs lack direct peer branch routes while the hub has the intended forwarding reachability.

Question 739

During a core-routing migration rehearsal, an HPE Juniper Networking engineer investigates this situation: A provider must ensure branch VPN sites exchange traffic only through a central hub, but branches currently import each other's routes directly. Which response or focused corrective action best addresses this situation without changing unrelated components?

  1. Import only scoped shared-service and return-path routes with appropriate policy.
  2. Configure unique appropriate RDs on each relevant PE routing instance.
  3. Implement asymmetric hub/spoke RT exchange and validate hub routing and return paths.
  4. Configure a tested shared VPN membership policy or equivalent explicit import/export design.

Explanation

Correct Answer

C:

Implement asymmetric hub/spoke RT exchange and validate hub routing and return paths. The change addresses the root behavior described here: VPN hub-and-spoke restrictions are enforced through route distribution and topology policy, not merely by naming sites branches. Verify success with: Branch VRFs lack direct peer branch routes while the hub has the intended forwarding reachability.

Incorrect Answers

A:

Import only scoped shared-service and return-path routes with appropriate policy. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically VRF route leaking to shared service. Shared service access requires deliberate selective route leaking, not global RT membership across all tenants. In this scenario, however, the distinguishing issue is VPN hub-and-spoke controlled import and the confirming observation is: Branch VRFs lack direct peer branch routes while the hub has the intended forwarding reachability.

B:

Configure unique appropriate RDs on each relevant PE routing instance. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically Route distinguisher for overlapping customer routes. A route distinguisher makes overlapping customer IPv4 prefixes distinguishable in VPN-IPv4 NLRI, but does not by itself decide route import. In this scenario, however, the distinguishing issue is VPN hub-and-spoke controlled import and the confirming observation is: Branch VRFs lack direct peer branch routes while the hub has the intended forwarding reachability.

D:

Configure a tested shared VPN membership policy or equivalent explicit import/export design. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically Full-mesh VPN routing. A full-mesh L3VPN needs an appropriate route distribution relationship among all participating VRFs. In this scenario, however, the distinguishing issue is VPN hub-and-spoke controlled import and the confirming observation is: Branch VRFs lack direct peer branch routes while the hub has the intended forwarding reachability.

Question 740

During a backbone POP acceptance review, an HPE Juniper Networking engineer investigates this situation: A provider must ensure branch VPN sites exchange traffic only through a central hub, but branches currently import each other's routes directly. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Keep negative cross-tenant tests and a shared-service route inventory.
  2. Check RD uniqueness separately from route target policy when onboarding overlapping tenants.
  3. Maintain a site reachability matrix and retest after VRF changes.
  4. Test branch-to-branch isolation even when all BGP sessions are healthy.

Explanation

Correct Answer

D:

Test branch-to-branch isolation even when all BGP sessions are healthy. The control limits repetition of the described root condition: VPN hub-and-spoke restrictions are enforced through route distribution and topology policy, not merely by naming sites branches. During audits, confirm: Branch VRFs lack direct peer branch routes while the hub has the intended forwarding reachability.

Incorrect Answers

A:

Keep negative cross-tenant tests and a shared-service route inventory. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically VRF route leaking to shared service. Shared service access requires deliberate selective route leaking, not global RT membership across all tenants. In this scenario, however, the distinguishing issue is VPN hub-and-spoke controlled import and the confirming observation is: Branch VRFs lack direct peer branch routes while the hub has the intended forwarding reachability.

B:

Check RD uniqueness separately from route target policy when onboarding overlapping tenants. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically Route distinguisher for overlapping customer routes. A route distinguisher makes overlapping customer IPv4 prefixes distinguishable in VPN-IPv4 NLRI, but does not by itself decide route import. In this scenario, however, the distinguishing issue is VPN hub-and-spoke controlled import and the confirming observation is: Branch VRFs lack direct peer branch routes while the hub has the intended forwarding reachability.

C:

Maintain a site reachability matrix and retest after VRF changes. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically Full-mesh VPN routing. A full-mesh L3VPN needs an appropriate route distribution relationship among all participating VRFs. In this scenario, however, the distinguishing issue is VPN hub-and-spoke controlled import and the confirming observation is: Branch VRFs lack direct peer branch routes while the hub has the intended forwarding reachability.


Service Provider Routing and Switching, Professional (JNCIP-SP) (JN0-664) Practice Tests

Purchase Individually

JN0-664 Premium File

Premium File
JN0-664 Premium File
96 Q&A
$76.99$69.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.