Pass Your Juniper JN0-664 Exam Easy!

Juniper JN0-664 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

JN0-664 Premium VCE File

Juniper JN0-664 Premium File

96 Questions & Answers

Last Update: Oct 12, 2026

$69.99

JN0-664 Bundle gives you unlimited access to "JN0-664" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
JN0-664 Premium VCE File
Juniper JN0-664 Premium File

96 Questions & Answers

Last Update: Oct 12, 2026

$69.99

Juniper JN0-664 Exam Bundle gives you unlimited access to "JN0-664" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

Juniper JN0-664 Practice Test 73

Question 720

During a high-availability validation, an HPE Juniper Networking engineer investigates this situation: A provider wants to reduce per-prefix VPN label allocation and instead use a label that identifies the whole VRF at the receiving PE. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Maintain a site reachability matrix and retest after VRF changes.
  2. Record RT and policy reasons for each rejected customer service route.
  3. Include interface-to-tenant mapping validation in turn-up checklists.
  4. Review table-label allocation and forwarding scale before changing a production VRF.

Explanation

Correct Answer

D:

Review table-label allocation and forwarding scale before changing a production VRF. The control limits repetition of the described root condition: VRF table-label identifies the routing instance so that the egress PE can perform a destination lookup in that VRF. During audits, confirm: The received label selects the proper VRF and the final IP route resolves to the intended CE.

Incorrect Answers

A:

Maintain a site reachability matrix and retest after VRF changes. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically Full-mesh VPN routing. A full-mesh L3VPN needs an appropriate route distribution relationship among all participating VRFs. In this scenario, however, the distinguishing issue is VRF table-label design and the confirming observation is: The received label selects the proper VRF and the final IP route resolves to the intended CE.

B:

Record RT and policy reasons for each rejected customer service route. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically Imported VPN route rejected from local VRF. RT association is necessary for many VPN designs, but additional VRF policy can still reject or modify a candidate route. In this scenario, however, the distinguishing issue is VRF table-label design and the confirming observation is: The received label selects the proper VRF and the final IP route resolves to the intended CE.

C:

Include interface-to-tenant mapping validation in turn-up checklists. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically Customer CE interface mapped wrong VRF. L3VPN separation starts at the correct PE customer interface association with the VRF. In this scenario, however, the distinguishing issue is VRF table-label design and the confirming observation is: The received label selects the proper VRF and the final IP route resolves to the intended CE.

Question 721

During a metro aggregation incident, an HPE Juniper Networking engineer investigates this situation: Two PEs send VPNv4 updates to a route reflector, but other client PEs learn none of the routes because the RR only has an IPv4 unicast family enabled. Which targeted check most directly distinguishes the likely cause before a configuration change?

  1. Inspect the RR BGP negotiated families and VPN route reflection configuration.
  2. Inspect the VPN route's BGP next hop and the IGP/MPLS path to that specific loopback.
  3. Inspect overlapping RT export/import values and exact received VPN routes.
  4. Compare hub/spoke route-target import/export policy with the route distribution topology.

Explanation

Correct Answer

A:

Inspect the RR BGP negotiated families and VPN route reflection configuration. This check examines the decisive condition for VPN route reflector family support before any unrelated changes are made. The underlying mechanism is: A route reflector can distribute VPN-IPv4 NLRI without hosting every customer's VRF, provided the proper family and policy exist. The confirming observation is: The RR receives and reflects eligible VPN routes to the intended PE clients.

Incorrect Answers

B:

Inspect the VPN route's BGP next hop and the IGP/MPLS path to that specific loopback. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically VPN next-hop not reachable. VPN control-plane reachability is not enough; the remote PE next hop must resolve to a usable provider transport path. In this scenario, however, the distinguishing issue is VPN route reflector family support and the confirming observation is: The RR receives and reflects eligible VPN routes to the intended PE clients.

C:

Inspect overlapping RT export/import values and exact received VPN routes. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically Route target leak between tenants. Shared route-target import membership can intentionally or accidentally connect routing domains even when route distinguishers remain unique. In this scenario, however, the distinguishing issue is VPN route reflector family support and the confirming observation is: The RR receives and reflects eligible VPN routes to the intended PE clients.

D:

Compare hub/spoke route-target import/export policy with the route distribution topology. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically VPN hub-and-spoke controlled import. VPN hub-and-spoke restrictions are enforced through route distribution and topology policy, not merely by naming sites branches. In this scenario, however, the distinguishing issue is VPN route reflector family support and the confirming observation is: The RR receives and reflects eligible VPN routes to the intended PE clients.

Question 722

During a managed service audit, an HPE Juniper Networking engineer investigates this situation: Two PEs send VPNv4 updates to a route reflector, but other client PEs learn none of the routes because the RR only has an IPv4 unicast family enabled. Which routing or service mechanism best explains the reported behavior?

  1. VPN control-plane reachability is not enough; the remote PE next hop must resolve to a usable provider transport path.
  2. A route reflector can distribute VPN-IPv4 NLRI without hosting every customer's VRF, provided the proper family and policy exist.
  3. Shared route-target import membership can intentionally or accidentally connect routing domains even when route distinguishers remain unique.
  4. VPN hub-and-spoke restrictions are enforced through route distribution and topology policy, not merely by naming sites branches.

Explanation

Correct Answer

B:

A route reflector can distribute VPN-IPv4 NLRI without hosting every customer's VRF, provided the proper family and policy exist. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: The RR receives and reflects eligible VPN routes to the intended PE clients. The targeted correction is: Enable the correct VPN address family and safe route reflection on the RR.

Incorrect Answers

A:

VPN control-plane reachability is not enough; the remote PE next hop must resolve to a usable provider transport path. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically VPN next-hop not reachable. VPN control-plane reachability is not enough; the remote PE next hop must resolve to a usable provider transport path. In this scenario, however, the distinguishing issue is VPN route reflector family support and the confirming observation is: The RR receives and reflects eligible VPN routes to the intended PE clients.

C:

Shared route-target import membership can intentionally or accidentally connect routing domains even when route distinguishers remain unique. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically Route target leak between tenants. Shared route-target import membership can intentionally or accidentally connect routing domains even when route distinguishers remain unique. In this scenario, however, the distinguishing issue is VPN route reflector family support and the confirming observation is: The RR receives and reflects eligible VPN routes to the intended PE clients.

D:

VPN hub-and-spoke restrictions are enforced through route distribution and topology policy, not merely by naming sites branches. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically VPN hub-and-spoke controlled import. VPN hub-and-spoke restrictions are enforced through route distribution and topology policy, not merely by naming sites branches. In this scenario, however, the distinguishing issue is VPN route reflector family support and the confirming observation is: The RR receives and reflects eligible VPN routes to the intended PE clients.

Question 723

During a network architecture troubleshooting workshop, an HPE Juniper Networking engineer investigates this situation: Two PEs send VPNv4 updates to a route reflector, but other client PEs learn none of the routes because the RR only has an IPv4 unicast family enabled. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?

  1. The remote PE loopback is reachable through labeled transport and the VPN route becomes usable.
  2. Cross-tenant VPN routes disappear after RT isolation while authorized same-tenant routes persist.
  3. The RR receives and reflects eligible VPN routes to the intended PE clients.
  4. Branch VRFs lack direct peer branch routes while the hub has the intended forwarding reachability.

Explanation

Correct Answer

C:

The RR receives and reflects eligible VPN routes to the intended PE clients. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: A route reflector can distribute VPN-IPv4 NLRI without hosting every customer's VRF, provided the proper family and policy exist.

Incorrect Answers

A:

The remote PE loopback is reachable through labeled transport and the VPN route becomes usable. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically VPN next-hop not reachable. VPN control-plane reachability is not enough; the remote PE next hop must resolve to a usable provider transport path. In this scenario, however, the distinguishing issue is VPN route reflector family support and the confirming observation is: The RR receives and reflects eligible VPN routes to the intended PE clients.

B:

Cross-tenant VPN routes disappear after RT isolation while authorized same-tenant routes persist. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically Route target leak between tenants. Shared route-target import membership can intentionally or accidentally connect routing domains even when route distinguishers remain unique. In this scenario, however, the distinguishing issue is VPN route reflector family support and the confirming observation is: The RR receives and reflects eligible VPN routes to the intended PE clients.

D:

Branch VRFs lack direct peer branch routes while the hub has the intended forwarding reachability. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically VPN hub-and-spoke controlled import. VPN hub-and-spoke restrictions are enforced through route distribution and topology policy, not merely by naming sites branches. In this scenario, however, the distinguishing issue is VPN route reflector family support and the confirming observation is: The RR receives and reflects eligible VPN routes to the intended PE clients.

Question 724

During an inter-POP failover test, an HPE Juniper Networking engineer investigates this situation: Two PEs send VPNv4 updates to a route reflector, but other client PEs learn none of the routes because the RR only has an IPv4 unicast family enabled. Which response or focused corrective action best addresses this situation without changing unrelated components?

  1. Restore underlying PE loopback routing and label reachability.
  2. Assign distinct RT policies to isolated tenants and restrict any deliberate route leaking.
  3. Implement asymmetric hub/spoke RT exchange and validate hub routing and return paths.
  4. Enable the correct VPN address family and safe route reflection on the RR.

Explanation

Correct Answer

D:

Enable the correct VPN address family and safe route reflection on the RR. The change addresses the root behavior described here: A route reflector can distribute VPN-IPv4 NLRI without hosting every customer's VRF, provided the proper family and policy exist. Verify success with: The RR receives and reflects eligible VPN routes to the intended PE clients.

Incorrect Answers

A:

Restore underlying PE loopback routing and label reachability. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically VPN next-hop not reachable. VPN control-plane reachability is not enough; the remote PE next hop must resolve to a usable provider transport path. In this scenario, however, the distinguishing issue is VPN route reflector family support and the confirming observation is: The RR receives and reflects eligible VPN routes to the intended PE clients.

B:

Assign distinct RT policies to isolated tenants and restrict any deliberate route leaking. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically Route target leak between tenants. Shared route-target import membership can intentionally or accidentally connect routing domains even when route distinguishers remain unique. In this scenario, however, the distinguishing issue is VPN route reflector family support and the confirming observation is: The RR receives and reflects eligible VPN routes to the intended PE clients.

C:

Implement asymmetric hub/spoke RT exchange and validate hub routing and return paths. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically VPN hub-and-spoke controlled import. VPN hub-and-spoke restrictions are enforced through route distribution and topology policy, not merely by naming sites branches. In this scenario, however, the distinguishing issue is VPN route reflector family support and the confirming observation is: The RR receives and reflects eligible VPN routes to the intended PE clients.

Question 725

During a control-plane reliability review, an HPE Juniper Networking engineer investigates this situation: Two PEs send VPNv4 updates to a route reflector, but other client PEs learn none of the routes because the RR only has an IPv4 unicast family enabled. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Test reflected VPN routes between PEs across both reflector failure domains.
  2. Watch hidden VPN routes and underlay route loss together.
  3. Use negative cross-tenant routing tests on every provisioning change.
  4. Test branch-to-branch isolation even when all BGP sessions are healthy.

Explanation

Correct Answer

A:

Test reflected VPN routes between PEs across both reflector failure domains. The control limits repetition of the described root condition: A route reflector can distribute VPN-IPv4 NLRI without hosting every customer's VRF, provided the proper family and policy exist. During audits, confirm: The RR receives and reflects eligible VPN routes to the intended PE clients.

Incorrect Answers

B:

Watch hidden VPN routes and underlay route loss together. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically VPN next-hop not reachable. VPN control-plane reachability is not enough; the remote PE next hop must resolve to a usable provider transport path. In this scenario, however, the distinguishing issue is VPN route reflector family support and the confirming observation is: The RR receives and reflects eligible VPN routes to the intended PE clients.

C:

Use negative cross-tenant routing tests on every provisioning change. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically Route target leak between tenants. Shared route-target import membership can intentionally or accidentally connect routing domains even when route distinguishers remain unique. In this scenario, however, the distinguishing issue is VPN route reflector family support and the confirming observation is: The RR receives and reflects eligible VPN routes to the intended PE clients.

D:

Test branch-to-branch isolation even when all BGP sessions are healthy. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically VPN hub-and-spoke controlled import. VPN hub-and-spoke restrictions are enforced through route distribution and topology policy, not merely by naming sites branches. In this scenario, however, the distinguishing issue is VPN route reflector family support and the confirming observation is: The RR receives and reflects eligible VPN routes to the intended PE clients.

Question 726

During a customer VPN change window, an HPE Juniper Networking engineer investigates this situation: A PE receives a VPNv4 route through a reflector but marks it hidden because the advertising PE loopback is absent from underlay reachability. Which targeted check most directly distinguishes the likely cause before a configuration change?

  1. Inspect negotiated family inet-vpn unicast capability and VPNv4 advertisements on the PE session.
  2. Inspect the VPN route's BGP next hop and the IGP/MPLS path to that specific loopback.
  3. Inspect the RR BGP negotiated families and VPN route reflection configuration.
  4. Inspect multicast VPN control-plane signaling and provider multicast transport separately from unicast VRF routes.

Explanation

Correct Answer

B:

Inspect the VPN route's BGP next hop and the IGP/MPLS path to that specific loopback. This check examines the decisive condition for VPN next-hop not reachable before any unrelated changes are made. The underlying mechanism is: VPN control-plane reachability is not enough; the remote PE next hop must resolve to a usable provider transport path. The confirming observation is: The remote PE loopback is reachable through labeled transport and the VPN route becomes usable.

Incorrect Answers

A:

Inspect negotiated family inet-vpn unicast capability and VPNv4 advertisements on the PE session. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically MP-BGP VPNv4 family absent. An established BGP session for IPv4 unicast does not automatically enable VPNv4 address-family exchange. In this scenario, however, the distinguishing issue is VPN next-hop not reachable and the confirming observation is: The remote PE loopback is reachable through labeled transport and the VPN route becomes usable.

C:

Inspect the RR BGP negotiated families and VPN route reflection configuration. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically VPN route reflector family support. A route reflector can distribute VPN-IPv4 NLRI without hosting every customer's VRF, provided the proper family and policy exist. In this scenario, however, the distinguishing issue is VPN next-hop not reachable and the confirming observation is: The remote PE loopback is reachable through labeled transport and the VPN route becomes usable.

D:

Inspect multicast VPN control-plane signaling and provider multicast transport separately from unicast VRF routes. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically MVPN receiver routing absent. L3VPN unicast reachability alone does not establish an MVPN multicast distribution tree. In this scenario, however, the distinguishing issue is VPN next-hop not reachable and the confirming observation is: The remote PE loopback is reachable through labeled transport and the VPN route becomes usable.

Question 727

During a core-routing migration rehearsal, an HPE Juniper Networking engineer investigates this situation: A PE receives a VPNv4 route through a reflector but marks it hidden because the advertising PE loopback is absent from underlay reachability. Which routing or service mechanism best explains the reported behavior?

  1. An established BGP session for IPv4 unicast does not automatically enable VPNv4 address-family exchange.
  2. A route reflector can distribute VPN-IPv4 NLRI without hosting every customer's VRF, provided the proper family and policy exist.
  3. VPN control-plane reachability is not enough; the remote PE next hop must resolve to a usable provider transport path.
  4. L3VPN unicast reachability alone does not establish an MVPN multicast distribution tree.

Explanation

Correct Answer

C:

VPN control-plane reachability is not enough; the remote PE next hop must resolve to a usable provider transport path. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: The remote PE loopback is reachable through labeled transport and the VPN route becomes usable. The targeted correction is: Restore underlying PE loopback routing and label reachability.

Incorrect Answers

A:

An established BGP session for IPv4 unicast does not automatically enable VPNv4 address-family exchange. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically MP-BGP VPNv4 family absent. An established BGP session for IPv4 unicast does not automatically enable VPNv4 address-family exchange. In this scenario, however, the distinguishing issue is VPN next-hop not reachable and the confirming observation is: The remote PE loopback is reachable through labeled transport and the VPN route becomes usable.

B:

A route reflector can distribute VPN-IPv4 NLRI without hosting every customer's VRF, provided the proper family and policy exist. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically VPN route reflector family support. A route reflector can distribute VPN-IPv4 NLRI without hosting every customer's VRF, provided the proper family and policy exist. In this scenario, however, the distinguishing issue is VPN next-hop not reachable and the confirming observation is: The remote PE loopback is reachable through labeled transport and the VPN route becomes usable.

D:

L3VPN unicast reachability alone does not establish an MVPN multicast distribution tree. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically MVPN receiver routing absent. L3VPN unicast reachability alone does not establish an MVPN multicast distribution tree. In this scenario, however, the distinguishing issue is VPN next-hop not reachable and the confirming observation is: The remote PE loopback is reachable through labeled transport and the VPN route becomes usable.

Question 728

During a backbone POP acceptance review, an HPE Juniper Networking engineer investigates this situation: A PE receives a VPNv4 route through a reflector but marks it hidden because the advertising PE loopback is absent from underlay reachability. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?

  1. Both peers negotiate VPNv4 and exchange the intended customer routes.
  2. The RR receives and reflects eligible VPN routes to the intended PE clients.
  3. The MVPN state and receiver membership form an end-to-end tree carrying the authorized multicast source.
  4. The remote PE loopback is reachable through labeled transport and the VPN route becomes usable.

Explanation

Correct Answer

D:

The remote PE loopback is reachable through labeled transport and the VPN route becomes usable. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: VPN control-plane reachability is not enough; the remote PE next hop must resolve to a usable provider transport path.

Incorrect Answers

A:

Both peers negotiate VPNv4 and exchange the intended customer routes. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically MP-BGP VPNv4 family absent. An established BGP session for IPv4 unicast does not automatically enable VPNv4 address-family exchange. In this scenario, however, the distinguishing issue is VPN next-hop not reachable and the confirming observation is: The remote PE loopback is reachable through labeled transport and the VPN route becomes usable.

B:

The RR receives and reflects eligible VPN routes to the intended PE clients. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically VPN route reflector family support. A route reflector can distribute VPN-IPv4 NLRI without hosting every customer's VRF, provided the proper family and policy exist. In this scenario, however, the distinguishing issue is VPN next-hop not reachable and the confirming observation is: The remote PE loopback is reachable through labeled transport and the VPN route becomes usable.

C:

The MVPN state and receiver membership form an end-to-end tree carrying the authorized multicast source. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically MVPN receiver routing absent. L3VPN unicast reachability alone does not establish an MVPN multicast distribution tree. In this scenario, however, the distinguishing issue is VPN next-hop not reachable and the confirming observation is: The remote PE loopback is reachable through labeled transport and the VPN route becomes usable.

Question 729

During an overnight NOC investigation, an HPE Juniper Networking engineer investigates this situation: A PE receives a VPNv4 route through a reflector but marks it hidden because the advertising PE loopback is absent from underlay reachability. Which response or focused corrective action best addresses this situation without changing unrelated components?

  1. Restore underlying PE loopback routing and label reachability.
  2. Enable the appropriate MP-BGP VPN family and related policy on the correct sessions.
  3. Enable the correct VPN address family and safe route reflection on the RR.
  4. Configure supported multicast VPN distribution and receiver/source membership controls.

Explanation

Correct Answer

A:

Restore underlying PE loopback routing and label reachability. The change addresses the root behavior described here: VPN control-plane reachability is not enough; the remote PE next hop must resolve to a usable provider transport path. Verify success with: The remote PE loopback is reachable through labeled transport and the VPN route becomes usable.

Incorrect Answers

B:

Enable the appropriate MP-BGP VPN family and related policy on the correct sessions. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically MP-BGP VPNv4 family absent. An established BGP session for IPv4 unicast does not automatically enable VPNv4 address-family exchange. In this scenario, however, the distinguishing issue is VPN next-hop not reachable and the confirming observation is: The remote PE loopback is reachable through labeled transport and the VPN route becomes usable.

C:

Enable the correct VPN address family and safe route reflection on the RR. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically VPN route reflector family support. A route reflector can distribute VPN-IPv4 NLRI without hosting every customer's VRF, provided the proper family and policy exist. In this scenario, however, the distinguishing issue is VPN next-hop not reachable and the confirming observation is: The remote PE loopback is reachable through labeled transport and the VPN route becomes usable.

D:

Configure supported multicast VPN distribution and receiver/source membership controls. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically MVPN receiver routing absent. L3VPN unicast reachability alone does not establish an MVPN multicast distribution tree. In this scenario, however, the distinguishing issue is VPN next-hop not reachable and the confirming observation is: The remote PE loopback is reachable through labeled transport and the VPN route becomes usable.

Question 730

During a customer service restoration, an HPE Juniper Networking engineer investigates this situation: A PE receives a VPNv4 route through a reflector but marks it hidden because the advertising PE loopback is absent from underlay reachability. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Verify each negotiated address family during VPN onboarding.
  2. Watch hidden VPN routes and underlay route loss together.
  3. Test reflected VPN routes between PEs across both reflector failure domains.
  4. Include multicast-over-VPN traffic tests in multisite service acceptance.

Explanation

Correct Answer

B:

Watch hidden VPN routes and underlay route loss together. The control limits repetition of the described root condition: VPN control-plane reachability is not enough; the remote PE next hop must resolve to a usable provider transport path. During audits, confirm: The remote PE loopback is reachable through labeled transport and the VPN route becomes usable.

Incorrect Answers

A:

Verify each negotiated address family during VPN onboarding. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically MP-BGP VPNv4 family absent. An established BGP session for IPv4 unicast does not automatically enable VPNv4 address-family exchange. In this scenario, however, the distinguishing issue is VPN next-hop not reachable and the confirming observation is: The remote PE loopback is reachable through labeled transport and the VPN route becomes usable.

C:

Test reflected VPN routes between PEs across both reflector failure domains. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically VPN route reflector family support. A route reflector can distribute VPN-IPv4 NLRI without hosting every customer's VRF, provided the proper family and policy exist. In this scenario, however, the distinguishing issue is VPN next-hop not reachable and the confirming observation is: The remote PE loopback is reachable through labeled transport and the VPN route becomes usable.

D:

Include multicast-over-VPN traffic tests in multisite service acceptance. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically MVPN receiver routing absent. L3VPN unicast reachability alone does not establish an MVPN multicast distribution tree. In this scenario, however, the distinguishing issue is VPN next-hop not reachable and the confirming observation is: The remote PE loopback is reachable through labeled transport and the VPN route becomes usable.


Service Provider Routing and Switching, Professional (JNCIP-SP) (JN0-664) Practice Tests

Purchase Individually

JN0-664 Premium File

Premium File
JN0-664 Premium File
96 Q&A
$76.99$69.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.