Question 750
During a customer VPN change window, an HPE Juniper Networking engineer investigates this situation: A large VPN network distributes many irrelevant VPN routes to PEs that serve only a few customers, causing excessive control-plane state. Which operational control would best prevent a recurrence of this exact failure mode?
- Test reflected VPN routes between PEs across both reflector failure domains.
- Review route-target interest and scale during multi-tenant growth.
- Check RD uniqueness separately from route target policy when onboarding overlapping tenants.
- Document expected label-stack depth at each monitored hop.
Explanation
Correct Answer
B:Review route-target interest and scale during multi-tenant growth. The control limits repetition of the described root condition: Route-target-based distribution can limit which VPN routes are propagated toward routers that have corresponding VPN interests. During audits, confirm: PEs receive only needed VPN route populations while intended imports remain complete.
Incorrect Answers
A:Test reflected VPN routes between PEs across both reflector failure domains. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically VPN route reflector family support. A route reflector can distribute VPN-IPv4 NLRI without hosting every customer's VRF, provided the proper family and policy exist. In this scenario, however, the distinguishing issue is Route-target constraint scale and the confirming observation is: PEs receive only needed VPN route populations while intended imports remain complete.
C:Check RD uniqueness separately from route target policy when onboarding overlapping tenants. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically Route distinguisher for overlapping customer routes. A route distinguisher makes overlapping customer IPv4 prefixes distinguishable in VPN-IPv4 NLRI, but does not by itself decide route import. In this scenario, however, the distinguishing issue is Route-target constraint scale and the confirming observation is: PEs receive only needed VPN route populations while intended imports remain complete.
D:Document expected label-stack depth at each monitored hop. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically LSP penultimate-hop pop effect. Penultimate-hop popping can remove an outer transport label before the egress PE while retaining the service label for VPN context. In this scenario, however, the distinguishing issue is Route-target constraint scale and the confirming observation is: PEs receive only needed VPN route populations while intended imports remain complete.
Question 751
During an overnight NOC investigation, an HPE Juniper Networking engineer investigates this situation: A PE learns customer routes via EBGP on the CE link but does not export them into VPNv4 because the VRF policy rejects the source prefixes. Which targeted check most directly distinguishes the likely cause before a configuration change?
- Inspect the remote PE BGP next-hop and MPLS/LDP or RSVP forwarding to that endpoint.
- Inspect the RR BGP negotiated families and VPN route reflection configuration.
- Check the active CE routes in the VRF and the VPN export policy term matches.
- Inspect site-of-origin marking and route rejection at the two PE-to-CE boundaries.
Explanation
Correct Answer
C:Check the active CE routes in the VRF and the VPN export policy term matches. This check examines the decisive condition for CE EBGP policy export before any unrelated changes are made. The underlying mechanism is: A usable CE-PE peering is distinct from approving VRF routes for VPNv4 distribution. The confirming observation is: Authorized customer prefixes gain VPN routes with appropriate RTs while other received prefixes remain blocked.
Incorrect Answers
A:Inspect the remote PE BGP next-hop and MPLS/LDP or RSVP forwarding to that endpoint. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically MPLS transport label missing. A usable L3VPN data path requires provider transport reachability in addition to customer service route advertisements. In this scenario, however, the distinguishing issue is CE EBGP policy export and the confirming observation is: Authorized customer prefixes gain VPN routes with appropriate RTs while other received prefixes remain blocked.
B:Inspect the RR BGP negotiated families and VPN route reflection configuration. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically VPN route reflector family support. A route reflector can distribute VPN-IPv4 NLRI without hosting every customer's VRF, provided the proper family and policy exist. In this scenario, however, the distinguishing issue is CE EBGP policy export and the confirming observation is: Authorized customer prefixes gain VPN routes with appropriate RTs while other received prefixes remain blocked.
D:Inspect site-of-origin marking and route rejection at the two PE-to-CE boundaries. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically Site-of-origin multihoming loop. A site-of-origin attribute can prevent a multi-homed VPN site from reimporting routes that originated at that same site. In this scenario, however, the distinguishing issue is CE EBGP policy export and the confirming observation is: Authorized customer prefixes gain VPN routes with appropriate RTs while other received prefixes remain blocked.
Question 752
During a customer service restoration, an HPE Juniper Networking engineer investigates this situation: A PE learns customer routes via EBGP on the CE link but does not export them into VPNv4 because the VRF policy rejects the source prefixes. Which routing or service mechanism best explains the reported behavior?
- RT association is necessary for many VPN designs, but additional VRF policy can still reject or modify a candidate route.
- A usable L3VPN data path requires provider transport reachability in addition to customer service route advertisements.
- A route reflector can distribute VPN-IPv4 NLRI without hosting every customer's VRF, provided the proper family and policy exist.
- A usable CE-PE peering is distinct from approving VRF routes for VPNv4 distribution.
Explanation
Correct Answer
D:A usable CE-PE peering is distinct from approving VRF routes for VPNv4 distribution. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: Authorized customer prefixes gain VPN routes with appropriate RTs while other received prefixes remain blocked. The targeted correction is: Correct a narrow VRF export policy matching the agreed customer prefixes.
Incorrect Answers
A:RT association is necessary for many VPN designs, but additional VRF policy can still reject or modify a candidate route. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically Imported VPN route rejected from local VRF. RT association is necessary for many VPN designs, but additional VRF policy can still reject or modify a candidate route. In this scenario, however, the distinguishing issue is CE EBGP policy export and the confirming observation is: Authorized customer prefixes gain VPN routes with appropriate RTs while other received prefixes remain blocked.
B:A usable L3VPN data path requires provider transport reachability in addition to customer service route advertisements. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically MPLS transport label missing. A usable L3VPN data path requires provider transport reachability in addition to customer service route advertisements. In this scenario, however, the distinguishing issue is CE EBGP policy export and the confirming observation is: Authorized customer prefixes gain VPN routes with appropriate RTs while other received prefixes remain blocked.
C:A route reflector can distribute VPN-IPv4 NLRI without hosting every customer's VRF, provided the proper family and policy exist. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically VPN route reflector family support. A route reflector can distribute VPN-IPv4 NLRI without hosting every customer's VRF, provided the proper family and policy exist. In this scenario, however, the distinguishing issue is CE EBGP policy export and the confirming observation is: Authorized customer prefixes gain VPN routes with appropriate RTs while other received prefixes remain blocked.
Question 753
During an edge-to-core validation, an HPE Juniper Networking engineer investigates this situation: A PE learns customer routes via EBGP on the CE link but does not export them into VPNv4 because the VRF policy rejects the source prefixes. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?
- Authorized customer prefixes gain VPN routes with appropriate RTs while other received prefixes remain blocked.
- The route passes the full import policy chain and appears in the intended customer table.
- Label transport to the remote PE exists and the VPN data plane forwards without unlabeled core drops.
- The RR receives and reflects eligible VPN routes to the intended PE clients.
Explanation
Correct Answer
A:Authorized customer prefixes gain VPN routes with appropriate RTs while other received prefixes remain blocked. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: A usable CE-PE peering is distinct from approving VRF routes for VPNv4 distribution.
Incorrect Answers
B:The route passes the full import policy chain and appears in the intended customer table. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically Imported VPN route rejected from local VRF. RT association is necessary for many VPN designs, but additional VRF policy can still reject or modify a candidate route. In this scenario, however, the distinguishing issue is CE EBGP policy export and the confirming observation is: Authorized customer prefixes gain VPN routes with appropriate RTs while other received prefixes remain blocked.
C:Label transport to the remote PE exists and the VPN data plane forwards without unlabeled core drops. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically MPLS transport label missing. A usable L3VPN data path requires provider transport reachability in addition to customer service route advertisements. In this scenario, however, the distinguishing issue is CE EBGP policy export and the confirming observation is: Authorized customer prefixes gain VPN routes with appropriate RTs while other received prefixes remain blocked.
D:The RR receives and reflects eligible VPN routes to the intended PE clients. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically VPN route reflector family support. A route reflector can distribute VPN-IPv4 NLRI without hosting every customer's VRF, provided the proper family and policy exist. In this scenario, however, the distinguishing issue is CE EBGP policy export and the confirming observation is: Authorized customer prefixes gain VPN routes with appropriate RTs while other received prefixes remain blocked.
Question 754
During a high-availability validation, an HPE Juniper Networking engineer investigates this situation: A PE learns customer routes via EBGP on the CE link but does not export them into VPNv4 because the VRF policy rejects the source prefixes. Which response or focused corrective action best addresses this situation without changing unrelated components?
- Repair the explicit VRF import terms without broadly importing all VPN routes.
- Correct a narrow VRF export policy matching the agreed customer prefixes.
- Restore supported LDP or RSVP transport and the necessary MPLS interface activation.
- Enable the correct VPN address family and safe route reflection on the RR.
Explanation
Correct Answer
B:Correct a narrow VRF export policy matching the agreed customer prefixes. The change addresses the root behavior described here: A usable CE-PE peering is distinct from approving VRF routes for VPNv4 distribution. Verify success with: Authorized customer prefixes gain VPN routes with appropriate RTs while other received prefixes remain blocked.
Incorrect Answers
A:Repair the explicit VRF import terms without broadly importing all VPN routes. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically Imported VPN route rejected from local VRF. RT association is necessary for many VPN designs, but additional VRF policy can still reject or modify a candidate route. In this scenario, however, the distinguishing issue is CE EBGP policy export and the confirming observation is: Authorized customer prefixes gain VPN routes with appropriate RTs while other received prefixes remain blocked.
C:Restore supported LDP or RSVP transport and the necessary MPLS interface activation. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically MPLS transport label missing. A usable L3VPN data path requires provider transport reachability in addition to customer service route advertisements. In this scenario, however, the distinguishing issue is CE EBGP policy export and the confirming observation is: Authorized customer prefixes gain VPN routes with appropriate RTs while other received prefixes remain blocked.
D:Enable the correct VPN address family and safe route reflection on the RR. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically VPN route reflector family support. A route reflector can distribute VPN-IPv4 NLRI without hosting every customer's VRF, provided the proper family and policy exist. In this scenario, however, the distinguishing issue is CE EBGP policy export and the confirming observation is: Authorized customer prefixes gain VPN routes with appropriate RTs while other received prefixes remain blocked.
Question 755
During a Junos routing maintenance review, an HPE Juniper Networking engineer investigates this situation: A PE learns customer routes via EBGP on the CE link but does not export them into VPNv4 because the VRF policy rejects the source prefixes. Which operational control would best prevent a recurrence of this exact failure mode?
- Record RT and policy reasons for each rejected customer service route.
- Require service-route and labeled-transport checks as separate release gates.
- Test CE-to-VPN advertisements independently of CE-PE session status.
- Test reflected VPN routes between PEs across both reflector failure domains.
Explanation
Correct Answer
C:Test CE-to-VPN advertisements independently of CE-PE session status. The control limits repetition of the described root condition: A usable CE-PE peering is distinct from approving VRF routes for VPNv4 distribution. During audits, confirm: Authorized customer prefixes gain VPN routes with appropriate RTs while other received prefixes remain blocked.
Incorrect Answers
A:Record RT and policy reasons for each rejected customer service route. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically Imported VPN route rejected from local VRF. RT association is necessary for many VPN designs, but additional VRF policy can still reject or modify a candidate route. In this scenario, however, the distinguishing issue is CE EBGP policy export and the confirming observation is: Authorized customer prefixes gain VPN routes with appropriate RTs while other received prefixes remain blocked.
B:Require service-route and labeled-transport checks as separate release gates. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically MPLS transport label missing. A usable L3VPN data path requires provider transport reachability in addition to customer service route advertisements. In this scenario, however, the distinguishing issue is CE EBGP policy export and the confirming observation is: Authorized customer prefixes gain VPN routes with appropriate RTs while other received prefixes remain blocked.
D:Test reflected VPN routes between PEs across both reflector failure domains. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically VPN route reflector family support. A route reflector can distribute VPN-IPv4 NLRI without hosting every customer's VRF, provided the proper family and policy exist. In this scenario, however, the distinguishing issue is CE EBGP policy export and the confirming observation is: Authorized customer prefixes gain VPN routes with appropriate RTs while other received prefixes remain blocked.
Question 756
During a managed service audit, an HPE Juniper Networking engineer investigates this situation: VPNv4 control-plane shows a remote prefix with the correct-looking RT, but the local VRF routing table excludes it due to an extra import policy. Which targeted check most directly distinguishes the likely cause before a configuration change?
- Inspect the VRF table-label setting and how IP lookup occurs after outer and service labels are removed.
- Inspect the VPN route's BGP next hop and the IGP/MPLS path to that specific loopback.
- Inspect route-target interest and distribution policy before changing BGP session count.
- Trace RT eligibility and subsequent VRF import policy matches.
Explanation
Correct Answer
D:Trace RT eligibility and subsequent VRF import policy matches. This check examines the decisive condition for Imported VPN route rejected from local VRF before any unrelated changes are made. The underlying mechanism is: RT association is necessary for many VPN designs, but additional VRF policy can still reject or modify a candidate route. The confirming observation is: The route passes the full import policy chain and appears in the intended customer table.
Incorrect Answers
A:Inspect the VRF table-label setting and how IP lookup occurs after outer and service labels are removed. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically VRF table-label design. VRF table-label identifies the routing instance so that the egress PE can perform a destination lookup in that VRF. In this scenario, however, the distinguishing issue is Imported VPN route rejected from local VRF and the confirming observation is: The route passes the full import policy chain and appears in the intended customer table.
B:Inspect the VPN route's BGP next hop and the IGP/MPLS path to that specific loopback. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically VPN next-hop not reachable. VPN control-plane reachability is not enough; the remote PE next hop must resolve to a usable provider transport path. In this scenario, however, the distinguishing issue is Imported VPN route rejected from local VRF and the confirming observation is: The route passes the full import policy chain and appears in the intended customer table.
C:Inspect route-target interest and distribution policy before changing BGP session count. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically Route-target constraint scale. Route-target-based distribution can limit which VPN routes are propagated toward routers that have corresponding VPN interests. In this scenario, however, the distinguishing issue is Imported VPN route rejected from local VRF and the confirming observation is: The route passes the full import policy chain and appears in the intended customer table.
Question 757
During a network architecture troubleshooting workshop, an HPE Juniper Networking engineer investigates this situation: VPNv4 control-plane shows a remote prefix with the correct-looking RT, but the local VRF routing table excludes it due to an extra import policy. Which routing or service mechanism best explains the reported behavior?
- RT association is necessary for many VPN designs, but additional VRF policy can still reject or modify a candidate route.
- A usable CE-PE peering is distinct from approving VRF routes for VPNv4 distribution.
- A usable L3VPN data path requires provider transport reachability in addition to customer service route advertisements.
- VRF table-label identifies the routing instance so that the egress PE can perform a destination lookup in that VRF.
Explanation
Correct Answer
A:RT association is necessary for many VPN designs, but additional VRF policy can still reject or modify a candidate route. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: The route passes the full import policy chain and appears in the intended customer table. The targeted correction is: Repair the explicit VRF import terms without broadly importing all VPN routes.
Incorrect Answers
B:A usable CE-PE peering is distinct from approving VRF routes for VPNv4 distribution. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically CE EBGP policy export. A usable CE-PE peering is distinct from approving VRF routes for VPNv4 distribution. In this scenario, however, the distinguishing issue is Imported VPN route rejected from local VRF and the confirming observation is: The route passes the full import policy chain and appears in the intended customer table.
C:A usable L3VPN data path requires provider transport reachability in addition to customer service route advertisements. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically MPLS transport label missing. A usable L3VPN data path requires provider transport reachability in addition to customer service route advertisements. In this scenario, however, the distinguishing issue is Imported VPN route rejected from local VRF and the confirming observation is: The route passes the full import policy chain and appears in the intended customer table.
D:VRF table-label identifies the routing instance so that the egress PE can perform a destination lookup in that VRF. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically VRF table-label design. VRF table-label identifies the routing instance so that the egress PE can perform a destination lookup in that VRF. In this scenario, however, the distinguishing issue is Imported VPN route rejected from local VRF and the confirming observation is: The route passes the full import policy chain and appears in the intended customer table.
Question 758
During an inter-POP failover test, an HPE Juniper Networking engineer investigates this situation: VPNv4 control-plane shows a remote prefix with the correct-looking RT, but the local VRF routing table excludes it due to an extra import policy. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?
- Authorized customer prefixes gain VPN routes with appropriate RTs while other received prefixes remain blocked.
- The route passes the full import policy chain and appears in the intended customer table.
- Label transport to the remote PE exists and the VPN data plane forwards without unlabeled core drops.
- The received label selects the proper VRF and the final IP route resolves to the intended CE.
Explanation
Correct Answer
B:The route passes the full import policy chain and appears in the intended customer table. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: RT association is necessary for many VPN designs, but additional VRF policy can still reject or modify a candidate route.
Incorrect Answers
A:Authorized customer prefixes gain VPN routes with appropriate RTs while other received prefixes remain blocked. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically CE EBGP policy export. A usable CE-PE peering is distinct from approving VRF routes for VPNv4 distribution. In this scenario, however, the distinguishing issue is Imported VPN route rejected from local VRF and the confirming observation is: The route passes the full import policy chain and appears in the intended customer table.
C:Label transport to the remote PE exists and the VPN data plane forwards without unlabeled core drops. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically MPLS transport label missing. A usable L3VPN data path requires provider transport reachability in addition to customer service route advertisements. In this scenario, however, the distinguishing issue is Imported VPN route rejected from local VRF and the confirming observation is: The route passes the full import policy chain and appears in the intended customer table.
D:The received label selects the proper VRF and the final IP route resolves to the intended CE. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically VRF table-label design. VRF table-label identifies the routing instance so that the egress PE can perform a destination lookup in that VRF. In this scenario, however, the distinguishing issue is Imported VPN route rejected from local VRF and the confirming observation is: The route passes the full import policy chain and appears in the intended customer table.
Question 759
During a control-plane reliability review, an HPE Juniper Networking engineer investigates this situation: VPNv4 control-plane shows a remote prefix with the correct-looking RT, but the local VRF routing table excludes it due to an extra import policy. Which response or focused corrective action best addresses this situation without changing unrelated components?
- Correct a narrow VRF export policy matching the agreed customer prefixes.
- Enable the appropriate MP-BGP VPN family and related policy on the correct sessions.
- Repair the explicit VRF import terms without broadly importing all VPN routes.
- Restore supported LDP or RSVP transport and the necessary MPLS interface activation.
Explanation
Correct Answer
C:Repair the explicit VRF import terms without broadly importing all VPN routes. The change addresses the root behavior described here: RT association is necessary for many VPN designs, but additional VRF policy can still reject or modify a candidate route. Verify success with: The route passes the full import policy chain and appears in the intended customer table.
Incorrect Answers
A:Correct a narrow VRF export policy matching the agreed customer prefixes. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically CE EBGP policy export. A usable CE-PE peering is distinct from approving VRF routes for VPNv4 distribution. In this scenario, however, the distinguishing issue is Imported VPN route rejected from local VRF and the confirming observation is: The route passes the full import policy chain and appears in the intended customer table.
B:Enable the appropriate MP-BGP VPN family and related policy on the correct sessions. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically MP-BGP VPNv4 family absent. An established BGP session for IPv4 unicast does not automatically enable VPNv4 address-family exchange. In this scenario, however, the distinguishing issue is Imported VPN route rejected from local VRF and the confirming observation is: The route passes the full import policy chain and appears in the intended customer table.
D:Restore supported LDP or RSVP transport and the necessary MPLS interface activation. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically MPLS transport label missing. A usable L3VPN data path requires provider transport reachability in addition to customer service route advertisements. In this scenario, however, the distinguishing issue is Imported VPN route rejected from local VRF and the confirming observation is: The route passes the full import policy chain and appears in the intended customer table.
Question 760
During a service-provider escalation, an HPE Juniper Networking engineer investigates this situation: VPNv4 control-plane shows a remote prefix with the correct-looking RT, but the local VRF routing table excludes it due to an extra import policy. Which operational control would best prevent a recurrence of this exact failure mode?
- Test CE-to-VPN advertisements independently of CE-PE session status.
- Verify each negotiated address family during VPN onboarding.
- Require service-route and labeled-transport checks as separate release gates.
- Record RT and policy reasons for each rejected customer service route.
Explanation
Correct Answer
D:Record RT and policy reasons for each rejected customer service route. The control limits repetition of the described root condition: RT association is necessary for many VPN designs, but additional VRF policy can still reject or modify a candidate route. During audits, confirm: The route passes the full import policy chain and appears in the intended customer table.
Incorrect Answers
A:Test CE-to-VPN advertisements independently of CE-PE session status. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically CE EBGP policy export. A usable CE-PE peering is distinct from approving VRF routes for VPNv4 distribution. In this scenario, however, the distinguishing issue is Imported VPN route rejected from local VRF and the confirming observation is: The route passes the full import policy chain and appears in the intended customer table.
B:Verify each negotiated address family during VPN onboarding. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically MP-BGP VPNv4 family absent. An established BGP session for IPv4 unicast does not automatically enable VPNv4 address-family exchange. In this scenario, however, the distinguishing issue is Imported VPN route rejected from local VRF and the confirming observation is: The route passes the full import policy chain and appears in the intended customer table.
C:Require service-route and labeled-transport checks as separate release gates. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically MPLS transport label missing. A usable L3VPN data path requires provider transport reachability in addition to customer service route advertisements. In this scenario, however, the distinguishing issue is Imported VPN route rejected from local VRF and the confirming observation is: The route passes the full import policy chain and appears in the intended customer table.
Service Provider Routing and Switching, Professional (JNCIP-SP) (JN0-664) Practice Tests