Question 70
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A laser printer's page contains toner that smears with a finger immediately after printing. A laser printer begins producing all-black pages after a cartridge and imaging assembly were mishandled during replacement. What is the most appropriate plan for this situation?
- Diagnose the fuser heating and pressure assembly; verify cartridge/drum installation and the imaging electrical contacts before changing network settings.
- Replace the supported toner cartridge and run the appropriate test page; verify cartridge/drum installation and the imaging electrical contacts before changing network settings.
- Diagnose the fuser heating and pressure assembly; inspect the imaging drum and fuser rollers for a repeated physical defect.
- Replace the supported toner cartridge and run the appropriate test page; inspect the imaging drum and fuser rollers for a repeated physical defect.
Explanation
Correct Answer
A:For ticket (1), Toner must be fused to the paper; a failing fuser leaves loose powder. For ticket (2), A fault in electrostatic image control can produce abnormal page-wide toner deposition.
Incorrect Answers
B:For ticket 1, diagnose the fuser heating and pressure assembly. Toner must be fused to the paper; a failing fuser leaves loose powder.
C:For ticket 2, verify cartridge/drum installation and the imaging electrical contacts before changing network settings. A fault in electrostatic image control can produce abnormal page-wide toner deposition.
D:For ticket 1, diagnose the fuser heating and pressure assembly. Toner must be fused to the paper; a failing fuser leaves loose powder. For ticket 2, verify cartridge/drum installation and the imaging electrical contacts before changing network settings. A fault in electrostatic image control can produce abnormal page-wide toner deposition.
Question 71
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A laser printer places a dark horizontal mark at the same interval on successive sheets of a job. A laser printer begins producing all-black pages after a cartridge and imaging assembly were mishandled during replacement. Which course of action addresses the stated issues?
- Replace the supported toner cartridge and run the appropriate test page; Diagnose the fuser heating and pressure assembly.
- Inspect the imaging drum and fuser rollers for a repeated physical defect; verify cartridge/drum installation and the imaging electrical contacts before changing network settings.
- Replace the supported toner cartridge and run the appropriate test page; verify cartridge/drum installation and the imaging electrical contacts before changing network settings.
- Inspect the imaging drum and fuser rollers for a repeated physical defect; Diagnose the fuser heating and pressure assembly.
Explanation
Correct Answer
B:For ticket (1), Periodic marks often correspond to the circumference of a damaged rotating component. For ticket (2), A fault in electrostatic image control can produce abnormal page-wide toner deposition.
Incorrect Answers
A:For ticket 1, inspect the imaging drum and fuser rollers for a repeated physical defect. Periodic marks often correspond to the circumference of a damaged rotating component. For ticket 2, verify cartridge/drum installation and the imaging electrical contacts before changing network settings. A fault in electrostatic image control can produce abnormal page-wide toner deposition.
C:For ticket 1, inspect the imaging drum and fuser rollers for a repeated physical defect. Periodic marks often correspond to the circumference of a damaged rotating component.
D:For ticket 2, verify cartridge/drum installation and the imaging electrical contacts before changing network settings. A fault in electrostatic image control can produce abnormal page-wide toner deposition.
Question 72
A service coordinator has THREE separate support tickets and needs the correct matching actions: A laser printer prints pale text uniformly even after changing the application driver, and toner status is almost empty. A laser printer's page contains toner that smears with a finger immediately after printing. A laser printer places a dark horizontal mark at the same interval on successive sheets of a job. Which response best addresses these needs?
- Verify cartridge/drum installation and the imaging electrical contacts before changing network settings; Diagnose the fuser heating and pressure assembly; and inspect the imaging drum and fuser rollers for a repeated physical defect.
- Replace the supported toner cartridge and run the appropriate test page; verify cartridge/drum installation and the imaging electrical contacts before changing network settings; and inspect the imaging drum and fuser rollers for a repeated physical defect.
- Replace the supported toner cartridge and run the appropriate test page; Diagnose the fuser heating and pressure assembly; and verify cartridge/drum installation and the imaging electrical contacts before changing network settings.
- Replace the supported toner cartridge and run the appropriate test page; Diagnose the fuser heating and pressure assembly; and inspect the imaging drum and fuser rollers for a repeated physical defect.
Explanation
Correct Answer
D:For ticket (1), Low toner can reduce print density without any network or driver fault. For ticket (2), Toner must be fused to the paper; a failing fuser leaves loose powder. For ticket (3), Periodic marks often correspond to the circumference of a damaged rotating component.
Incorrect Answers
A:For ticket 1, replace the supported toner cartridge and run the appropriate test page. Low toner can reduce print density without any network or driver fault.
B:For ticket 2, diagnose the fuser heating and pressure assembly. Toner must be fused to the paper; a failing fuser leaves loose powder.
C:For ticket 3, inspect the imaging drum and fuser rollers for a repeated physical defect. Periodic marks often correspond to the circumference of a damaged rotating component.
Question 73
A help desk receives a support ticket with this evidence: One employee's print job remains in the local spooler while colleagues print successfully to the same shared device. What is the MOST appropriate technician action?
- Update its printer port or configure an approved DHCP reservation.
- Install a supported driver package compatible with the upgraded operating system.
- Enable secured print release and verify badge-based retrieval for the affected queue.
- Clear the affected workstation's stuck queue and reestablish its approved printer connection.
Explanation
Correct Answer
D:A client-specific blocked queue can prevent printing even when the shared printer is healthy.
Incorrect Answers
A:Device addressing changes can orphan clients configured to print to an old network endpoint; a client-specific blocked queue can prevent printing even when the shared printer is healthy.
B:A printer device can be healthy while client software lacks a compatible print driver; a client-specific blocked queue can prevent printing even when the shared printer is healthy.
C:A configured printer can function mechanically while violating output confidentiality controls; a client-specific blocked queue can prevent printing even when the shared printer is healthy.
Question 74
A field technician verifies the following customer equipment condition: A shared printer has a valid IP address but jobs sent to its old address disappear after a DHCP scope change. Which response BEST addresses the actual cause or requirement?
- Enable secured print release and verify badge-based retrieval for the affected queue.
- Clear the affected workstation's stuck queue and reestablish its approved printer connection.
- Update its printer port or configure an approved DHCP reservation.
- Install a supported driver package compatible with the upgraded operating system.
Explanation
Correct Answer
C:Device addressing changes can orphan clients configured to print to an old network endpoint.
Incorrect Answers
A:Enabling secured print release and verifying badge-based retrieval for the affected queue would not update its printer port or configure an approved DHCP reservation.
B:Clear the affected workstation's stuck queue and reestablish its approved printer connection would not update its printer port or configure an approved DHCP reservation.
D:Installing a supported driver package compatible with the upgraded operating system would not update its printer port or configure an approved DHCP reservation.
Question 75
An IT support worker is asked to resolve this case: A printer displays 'driver unavailable' only on newly upgraded clients while older computers continue printing. Which next step MOST directly resolves the reported condition?
- Update its printer port or configure an approved DHCP reservation.
- Install a supported driver package compatible with the upgraded operating system.
- Enable secured print release and verify badge-based retrieval for the affected queue.
- Clear the affected workstation's stuck queue and reestablish its approved printer connection.
Explanation
Correct Answer
B:A printer device can be healthy while client software lacks a compatible print driver.
Incorrect Answers
A:Updating its printer port or configure an approved DHCP reservation would not install a supported driver package compatible with the upgraded operating system.
C:Enabling secured print release and verifying badge-based retrieval for the affected queue would not install a supported driver package compatible with the upgraded operating system.
D:Clear the affected workstation's stuck queue and reestablish its approved printer connection would not install a supported driver package compatible with the upgraded operating system.
Question 76
A service bench observes this hardware or network symptom: A confidential document prints immediately into an open public tray, even though company policy requires badge pickup. What should the support specialist recommend FIRST within the stated limits?
- Clear the affected workstation's stuck queue and reestablish its approved printer connection.
- Update its printer port or configure an approved DHCP reservation.
- Install a supported driver package compatible with the upgraded operating system.
- Enable secured print release and verify badge-based retrieval for the affected queue.
Explanation
Correct Answer
D:A configured printer can function mechanically while violating output confidentiality controls.
Incorrect Answers
A:Clear the affected workstation's stuck queue and reestablish its approved printer connection would not enable secured print release and verify badge-based retrieval for the affected queue.
B:Updating its printer port or configure an approved DHCP reservation would not enable secured print release and verify badge-based retrieval for the affected queue.
C:Installing a supported driver package compatible with the upgraded operating system would not enable secured print release and verify badge-based retrieval for the affected queue.
Question 77
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: One employee's print job remains in the local spooler while colleagues print successfully to the same shared device. A shared printer has a valid IP address but jobs sent to its old address disappear after a DHCP scope change. Which course of action addresses the stated issues?
- Clear the affected workstation's stuck queue and reestablish its approved printer connection; enable secured print release and verify badge-based retrieval for the affected queue.
- Install a supported driver package compatible with the upgraded operating system; enable secured print release and verify badge-based retrieval for the affected queue.
- Clear the affected workstation's stuck queue and reestablish its approved printer connection; update its printer port or configure an approved DHCP reservation.
- Install a supported driver package compatible with the upgraded operating system; update its printer port or configure an approved DHCP reservation.
Explanation
Correct Answer
C:For ticket (1), A client-specific blocked queue can prevent printing even when the shared printer is healthy. For ticket (2), Device addressing changes can orphan clients configured to print to an old network endpoint.
Incorrect Answers
A:For ticket 2, update its printer port or configure an approved DHCP reservation. Device addressing changes can orphan clients configured to print to an old network endpoint.
B:For ticket 1, clear the affected workstation's stuck queue and reestablish its approved printer connection. A client-specific blocked queue can prevent printing even when the shared printer is healthy. For ticket 2, update its printer port or configure an approved DHCP reservation. Device addressing changes can orphan clients configured to print to an old network endpoint.
D:For ticket 1, clear the affected workstation's stuck queue and reestablish its approved printer connection. A client-specific blocked queue can prevent printing even when the shared printer is healthy.
Question 78
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: One employee's print job remains in the local spooler while colleagues print successfully to the same shared device. A printer displays 'driver unavailable' only on newly upgraded clients while older computers continue printing. Which response best addresses these needs?
- Update its printer port or configure an approved DHCP reservation; install a supported driver package compatible with the upgraded operating system.
- Clear the affected workstation's stuck queue and reestablish its approved printer connection; enable secured print release and verify badge-based retrieval for the affected queue.
- Update its printer port or configure an approved DHCP reservation; enable secured print release and verify badge-based retrieval for the affected queue.
- Clear the affected workstation's stuck queue and reestablish its approved printer connection; install a supported driver package compatible with the upgraded operating system.
Explanation
Correct Answer
D:For ticket (1), A client-specific blocked queue can prevent printing even when the shared printer is healthy. For ticket (2), A printer device can be healthy while client software lacks a compatible print driver.
Incorrect Answers
A:For ticket 1, clear the affected workstation's stuck queue and reestablish its approved printer connection. A client-specific blocked queue can prevent printing even when the shared printer is healthy.
B:For ticket 2, install a supported driver package compatible with the upgraded operating system. A printer device can be healthy while client software lacks a compatible print driver.
C:For ticket 1, clear the affected workstation's stuck queue and reestablish its approved printer connection. A client-specific blocked queue can prevent printing even when the shared printer is healthy. For ticket 2, install a supported driver package compatible with the upgraded operating system. A printer device can be healthy while client software lacks a compatible print driver.
Question 79
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A shared printer has a valid IP address but jobs sent to its old address disappear after a DHCP scope change. A confidential document prints immediately into an open public tray, even though company policy requires badge pickup. What is the most appropriate plan for this situation?
- Clear the affected workstation's stuck queue and reestablish its approved printer connection; install a supported driver package compatible with the upgraded operating system.
- Update its printer port or configure an approved DHCP reservation; enable secured print release and verify badge-based retrieval for the affected queue.
- Clear the affected workstation's stuck queue and reestablish its approved printer connection; enable secured print release and verify badge-based retrieval for the affected queue.
- Update its printer port or configure an approved DHCP reservation; install a supported driver package compatible with the upgraded operating system.
Explanation
Correct Answer
B:For ticket (1), Device addressing changes can orphan clients configured to print to an old network endpoint. For ticket (2), A configured printer can function mechanically while violating output confidentiality controls.
Incorrect Answers
A:For ticket 1, update its printer port or configure an approved DHCP reservation. Device addressing changes can orphan clients configured to print to an old network endpoint. For ticket 2, enable secured print release and verify badge-based retrieval for the affected queue. A configured printer can function mechanically while violating output confidentiality controls.
C:For ticket 1, update its printer port or configure an approved DHCP reservation. Device addressing changes can orphan clients configured to print to an old network endpoint.
D:For ticket 2, enable secured print release and verify badge-based retrieval for the affected queue. A configured printer can function mechanically while violating output confidentiality controls.
Question 80
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A printer displays 'driver unavailable' only on newly upgraded clients while older computers continue printing. A confidential document prints immediately into an open public tray, even though company policy requires badge pickup. Which course of action addresses the stated issues?
- Clear the affected workstation's stuck queue and reestablish its approved printer connection; update its printer port or configure an approved DHCP reservation.
- Install a supported driver package compatible with the upgraded operating system; enable secured print release and verify badge-based retrieval for the affected queue.
- Clear the affected workstation's stuck queue and reestablish its approved printer connection; enable secured print release and verify badge-based retrieval for the affected queue.
- Install a supported driver package compatible with the upgraded operating system; update its printer port or configure an approved DHCP reservation.
Explanation
Correct Answer
B:For ticket (1), A printer device can be healthy while client software lacks a compatible print driver. For ticket (2), A configured printer can function mechanically while violating output confidentiality controls.
Incorrect Answers
A:For ticket 1, install a supported driver package compatible with the upgraded operating system. A printer device can be healthy while client software lacks a compatible print driver. For ticket 2, enable secured print release and verify badge-based retrieval for the affected queue. A configured printer can function mechanically while violating output confidentiality controls.
C:For ticket 1, install a supported driver package compatible with the upgraded operating system. A printer device can be healthy while client software lacks a compatible print driver.
D:For ticket 2, enable secured print release and verify badge-based retrieval for the affected queue. A configured printer can function mechanically while violating output confidentiality controls.
CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests