Question 90
A service coordinator has THREE separate support tickets and needs the correct matching actions: A compact computer has an M.2 socket that supports only SATA, and a technician purchases a PCIe NVMe-only drive. A workstation needs fast parallel storage access, and the designer compares a mechanical 7200 rpm HDD to a PCIe NVMe SSD. A server technician orders a SAS enterprise drive for a consumer SATA-only motherboard without a SAS controller. Which response best addresses these needs?
- Verify the socket's protocol/key support and select an electrically compatible SSD; verify the storage medium independently of the drive's physical form factor; and use a supported SAS host controller/backplane or select a compatible SATA drive.
- Verify the socket's protocol/key support and select an electrically compatible SSD; choose an appropriate NVMe SSD for the required random I/O and throughput workload; and verify the storage medium independently of the drive's physical form factor.
- Verify the socket's protocol/key support and select an electrically compatible SSD; choose an appropriate NVMe SSD for the required random I/O and throughput workload; and use a supported SAS host controller/backplane or select a compatible SATA drive.
- Verify the storage medium independently of the drive's physical form factor; choose an appropriate NVMe SSD for the required random I/O and throughput workload; and use a supported SAS host controller/backplane or select a compatible SATA drive.
Explanation
Correct Answer
C:For ticket (1), M.2 describes form factor, whereas SATA and NVMe over PCIe are distinct interfaces. For ticket (2), NVMe on PCIe avoids mechanical seek delays and commonly outperforms rotating disks. For ticket (3), SAS drives cannot generally communicate with a SATA-only controller despite similar drive packaging.
Incorrect Answers
A:For ticket 2, choose an appropriate NVMe SSD for the required random I/O and throughput workload. NVMe on PCIe avoids mechanical seek delays and commonly outperforms rotating disks.
B:For ticket 3, use a supported SAS host controller/backplane or select a compatible SATA drive. SAS drives cannot generally communicate with a SATA-only controller despite similar drive packaging.
D:For ticket 1, verify the socket's protocol/key support and select an electrically compatible SSD. M.2 describes form factor, whereas SATA and NVMe over PCIe are distinct interfaces.
Question 91
An IT support worker is asked to resolve this case: An inkjet prints horizontal blank bands although the cartridge still has ink, and the device sat idle for weeks. Which next step MOST directly resolves the reported condition?
- Reorient the correct thermal media with its coated side toward the printhead.
- Replace its spent impact ribbon and verify media alignment.
- Run a supported printhead nozzle-cleaning cycle and inspect the test pattern.
- Remove the manufacturer's protective seals and reinstall the cartridge correctly.
Explanation
Correct Answer
C:Dried or clogged nozzles can interrupt ink placement without an empty ink tank.
Incorrect Answers
A:Reorient the correct thermal media with its coated side toward the printhead would not run a supported printhead nozzle-cleaning cycle and inspect the test pattern.
B:Replacing its spent impact ribbon and verifying media alignment would not run a supported printhead nozzle-cleaning cycle and inspect the test pattern.
D:Removing the manufacturer's protective seals and reinstall the cartridge correctly would not run a supported printhead nozzle-cleaning cycle and inspect the test pattern.
Question 92
A service bench observes this hardware or network symptom: A new inkjet cartridge is installed but output remains faded because its protective shipping tape covers the nozzle vents. What should the support specialist recommend FIRST within the stated limits?
- Run a supported printhead nozzle-cleaning cycle and inspect the test pattern.
- Remove the manufacturer's protective seals and reinstall the cartridge correctly.
- Reorient the correct thermal media with its coated side toward the printhead.
- Replace its spent impact ribbon and verify media alignment.
Explanation
Correct Answer
B:Packaging tape can block ink flow even when cartridge electronics are recognized.
Incorrect Answers
A:Running a supported printhead nozzle-cleaning cycle and inspecting the test pattern would not remove the manufacturer's protective seals and reinstall the cartridge correctly.
C:Reorient the correct thermal media with its coated side toward the printhead would not remove the manufacturer's protective seals and reinstall the cartridge correctly.
D:Replacing its spent impact ribbon and verifying media alignment would not remove the manufacturer's protective seals and reinstall the cartridge correctly.
Question 93
During a controlled office IT maintenance window, the technician notes: A thermal receipt printer feeds paper but leaves the entire page white after the roll is inserted backward. What is the MOST appropriate technician action?
- Replace its spent impact ribbon and verify media alignment.
- Run a supported printhead nozzle-cleaning cycle and inspect the test pattern.
- Remove the manufacturer's protective seals and reinstall the cartridge correctly.
- Reorient the correct thermal media with its coated side toward the printhead.
Explanation
Correct Answer
D:Thermal paper reacts to heat only on the coated printing surface.
Incorrect Answers
A:Mechanical strikes may continue while an exhausted ribbon transfers very little pigment; thermal paper reacts to heat only on the coated printing surface.
B:Dried or clogged nozzles can interrupt ink placement without an empty ink tank; thermal paper reacts to heat only on the coated printing surface.
C:Packaging tape can block ink flow even when cartridge electronics are recognized; thermal paper reacts to heat only on the coated printing surface.
Question 94
A support case documents the following situation: A dot-matrix printer makes normal hammering sounds but produces almost invisible characters on multipart forms. Which response BEST addresses the actual cause or requirement?
- Replace its spent impact ribbon and verify media alignment.
- Run a supported printhead nozzle-cleaning cycle and inspect the test pattern.
- Remove the manufacturer's protective seals and reinstall the cartridge correctly.
- Reorient the correct thermal media with its coated side toward the printhead.
Explanation
Correct Answer
A:Mechanical strikes may continue while an exhausted ribbon transfers very little pigment.
Incorrect Answers
B:Running a supported printhead nozzle-cleaning cycle and inspecting the test pattern would not replace its spent impact ribbon and verify media alignment.
C:Removing the manufacturer's protective seals and reinstall the cartridge correctly would not replace its spent impact ribbon and verify media alignment.
D:Reorient the correct thermal media with its coated side toward the printhead would not replace its spent impact ribbon and verify media alignment.
Question 95
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: An inkjet prints horizontal blank bands although the cartridge still has ink, and the device sat idle for weeks. A new inkjet cartridge is installed but output remains faded because its protective shipping tape covers the nozzle vents. Which course of action addresses the stated issues?
- Run a supported printhead nozzle-cleaning cycle and inspect the test pattern; remove the manufacturer's protective seals and reinstall the cartridge correctly.
- Reorient the correct thermal media with its coated side toward the printhead; remove the manufacturer's protective seals and reinstall the cartridge correctly.
- Run a supported printhead nozzle-cleaning cycle and inspect the test pattern; replace its spent impact ribbon and verify media alignment.
- Reorient the correct thermal media with its coated side toward the printhead; replace its spent impact ribbon and verify media alignment.
Explanation
Correct Answer
A:For ticket (1), Dried or clogged nozzles can interrupt ink placement without an empty ink tank. For ticket (2), Packaging tape can block ink flow even when cartridge electronics are recognized.
Incorrect Answers
B:For ticket 1, run a supported printhead nozzle-cleaning cycle and inspect the test pattern. Dried or clogged nozzles can interrupt ink placement without an empty ink tank.
C:For ticket 2, remove the manufacturer's protective seals and reinstall the cartridge correctly. Packaging tape can block ink flow even when cartridge electronics are recognized.
D:For ticket 1, run a supported printhead nozzle-cleaning cycle and inspect the test pattern. Dried or clogged nozzles can interrupt ink placement without an empty ink tank. For ticket 2, remove the manufacturer's protective seals and reinstall the cartridge correctly. Packaging tape can block ink flow even when cartridge electronics are recognized.
Question 96
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: An inkjet prints horizontal blank bands although the cartridge still has ink, and the device sat idle for weeks. A thermal receipt printer feeds paper but leaves the entire page white after the roll is inserted backward. Which response best addresses these needs?
- Remove the manufacturer's protective seals and reinstall the cartridge correctly; Reorient the correct thermal media with its coated side toward the printhead.
- Run a supported printhead nozzle-cleaning cycle and inspect the test pattern; replace its spent impact ribbon and verify media alignment.
- Remove the manufacturer's protective seals and reinstall the cartridge correctly; replace its spent impact ribbon and verify media alignment.
- Run a supported printhead nozzle-cleaning cycle and inspect the test pattern; Reorient the correct thermal media with its coated side toward the printhead.
Explanation
Correct Answer
D:For ticket (1), Dried or clogged nozzles can interrupt ink placement without an empty ink tank. For ticket (2), Thermal paper reacts to heat only on the coated printing surface.
Incorrect Answers
A:For ticket 1, run a supported printhead nozzle-cleaning cycle and inspect the test pattern. Dried or clogged nozzles can interrupt ink placement without an empty ink tank.
B:For ticket 2, reorient the correct thermal media with its coated side toward the printhead. Thermal paper reacts to heat only on the coated printing surface.
C:For ticket 1, run a supported printhead nozzle-cleaning cycle and inspect the test pattern. Dried or clogged nozzles can interrupt ink placement without an empty ink tank. For ticket 2, reorient the correct thermal media with its coated side toward the printhead. Thermal paper reacts to heat only on the coated printing surface.
Question 97
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A new inkjet cartridge is installed but output remains faded because its protective shipping tape covers the nozzle vents. A dot-matrix printer makes normal hammering sounds but produces almost invisible characters on multipart forms. What is the most appropriate plan for this situation?
- Remove the manufacturer's protective seals and reinstall the cartridge correctly; replace its spent impact ribbon and verify media alignment.
- Run a supported printhead nozzle-cleaning cycle and inspect the test pattern; replace its spent impact ribbon and verify media alignment.
- Remove the manufacturer's protective seals and reinstall the cartridge correctly; Reorient the correct thermal media with its coated side toward the printhead.
- Run a supported printhead nozzle-cleaning cycle and inspect the test pattern; Reorient the correct thermal media with its coated side toward the printhead.
Explanation
Correct Answer
A:For ticket (1), Packaging tape can block ink flow even when cartridge electronics are recognized. For ticket (2), Mechanical strikes may continue while an exhausted ribbon transfers very little pigment.
Incorrect Answers
B:For ticket 1, remove the manufacturer's protective seals and reinstall the cartridge correctly. Packaging tape can block ink flow even when cartridge electronics are recognized.
C:For ticket 2, replace its spent impact ribbon and verify media alignment. Mechanical strikes may continue while an exhausted ribbon transfers very little pigment.
D:For ticket 1, remove the manufacturer's protective seals and reinstall the cartridge correctly. Packaging tape can block ink flow even when cartridge electronics are recognized. For ticket 2, replace its spent impact ribbon and verify media alignment. Mechanical strikes may continue while an exhausted ribbon transfers very little pigment.
Question 98
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A thermal receipt printer feeds paper but leaves the entire page white after the roll is inserted backward. A dot-matrix printer makes normal hammering sounds but produces almost invisible characters on multipart forms. Which course of action addresses the stated issues?
- Run a supported printhead nozzle-cleaning cycle and inspect the test pattern; replace its spent impact ribbon and verify media alignment.
- Reorient the correct thermal media with its coated side toward the printhead; remove the manufacturer's protective seals and reinstall the cartridge correctly.
- Run a supported printhead nozzle-cleaning cycle and inspect the test pattern; remove the manufacturer's protective seals and reinstall the cartridge correctly.
- Reorient the correct thermal media with its coated side toward the printhead; replace its spent impact ribbon and verify media alignment.
Explanation
Correct Answer
D:For ticket (1), Thermal paper reacts to heat only on the coated printing surface. For ticket (2), Mechanical strikes may continue while an exhausted ribbon transfers very little pigment.
Incorrect Answers
A:For ticket 1, reorient the correct thermal media with its coated side toward the printhead. Thermal paper reacts to heat only on the coated printing surface.
B:For ticket 2, replace its spent impact ribbon and verify media alignment. Mechanical strikes may continue while an exhausted ribbon transfers very little pigment.
C:For ticket 1, reorient the correct thermal media with its coated side toward the printhead. Thermal paper reacts to heat only on the coated printing surface. For ticket 2, replace its spent impact ribbon and verify media alignment. Mechanical strikes may continue while an exhausted ribbon transfers very little pigment.
Question 99
A service coordinator has THREE separate support tickets and needs the correct matching actions: An inkjet prints horizontal blank bands although the cartridge still has ink, and the device sat idle for weeks. A new inkjet cartridge is installed but output remains faded because its protective shipping tape covers the nozzle vents. A thermal receipt printer feeds paper but leaves the entire page white after the roll is inserted backward. Which response best addresses these needs?
- Replace its spent impact ribbon and verify media alignment; remove the manufacturer's protective seals and reinstall the cartridge correctly; and Reorient the correct thermal media with its coated side toward the printhead.
- Run a supported printhead nozzle-cleaning cycle and inspect the test pattern; replace its spent impact ribbon and verify media alignment; and Reorient the correct thermal media with its coated side toward the printhead.
- Run a supported printhead nozzle-cleaning cycle and inspect the test pattern; remove the manufacturer's protective seals and reinstall the cartridge correctly; and replace its spent impact ribbon and verify media alignment.
- Run a supported printhead nozzle-cleaning cycle and inspect the test pattern; remove the manufacturer's protective seals and reinstall the cartridge correctly; and Reorient the correct thermal media with its coated side toward the printhead.
Explanation
Correct Answer
D:For ticket (1), Dried or clogged nozzles can interrupt ink placement without an empty ink tank. For ticket (2), Packaging tape can block ink flow even when cartridge electronics are recognized. For ticket (3), Thermal paper reacts to heat only on the coated printing surface.
Incorrect Answers
A:For ticket 1, run a supported printhead nozzle-cleaning cycle and inspect the test pattern. Dried or clogged nozzles can interrupt ink placement without an empty ink tank.
B:For ticket 2, remove the manufacturer's protective seals and reinstall the cartridge correctly. Packaging tape can block ink flow even when cartridge electronics are recognized.
C:For ticket 3, reorient the correct thermal media with its coated side toward the printhead. Thermal paper reacts to heat only on the coated printing surface.
Question 100
A service bench observes this hardware or network symptom: An internal client cannot resolve hostnames because both UDP and TCP queries to the approved DNS resolver are filtered. What should the support specialist recommend FIRST within the stated limits?
- Distinguish legacy NetBIOS ports 137 through 139 from direct-hosted SMB on port 445.
- Verify that DNS service traffic is allowed on port 53 as required by the resolver configuration.
- Verify UDP ports 67 and 68 and any required DHCP relay forwarding.
- Check authorized LDAP traffic using TCP port 389 and the organization's encryption requirements.
Explanation
Correct Answer
B:DNS commonly uses UDP 53 for ordinary queries and TCP 53 for some larger or control exchanges.
Incorrect Answers
A:Distinguishing legacy NetBIOS ports 137 through 139 from direct-hosted SMB on port 445 would not verify that DNS service traffic is allowed on port 53 as required by the resolver configuration.
C:Verifying UDP ports 67 and 68 and any required DHCP relay forwarding would not verify that DNS service traffic is allowed on port 53 as required by the resolver configuration.
D:Checking authorized LDAP traffic using TCP port 389 and the organization's encryption requirements would not verify that DNS service traffic is allowed on port 53 as required by the resolver configuration.
CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests