Question 70
Two application teams use the same physical SAN switches but must keep their fabric control traffic separated. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN. What should the engineer do first to address the observed failure?
- Use the correct initiator and target port WWPNs when creating the required zone memberships.
- Create and verify separate VSAN assignments for the teams' relevant FC interfaces and zonesets.
- Update the device alias to the authorized new WWPN and validate all zoning references before applying it.
- Confirm upstream NPIV support and the NPV uplink VSAN association before modifying host zoning.
Explanation
Correct Answer
B:Create and verify separate VSAN assignments for the teams' relevant FC interfaces and zonesets. VSANs provide logical fabric separation across shared physical Fibre Channel infrastructure. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN.
Incorrect Answers
A:Use the correct initiator and target port WWPNs when creating the required zone memberships. This concerns wwpn versus wwnn, not VSAN isolation.
C:Update the device alias to the authorized new WWPN and validate all zoning references before applying it. This concerns device alias maintenance, not VSAN isolation.
D:Confirm upstream NPIV support and the NPV uplink VSAN association before modifying host zoning. This concerns npv uplink fabric services, not VSAN isolation.
Question 71
A new VXLAN leaf advertises local VNIs but tunnels to another leaf fail because the VTEP source loopback is missing from underlay routing. The team is preparing a controlled production change and must preserve fabric reachability. Which intervention most directly addresses the stated condition?
- Advertise and verify the VTEP source-loopback reachability in the underlay routing domain.
- Restore the peer-link and validate keepalive and vPC consistency rather than forcing both peers to forward independently.
- Align the switchport and LACP parameters across members before attempting to force them into the bundle.
- Correlate Nexus Dashboard health and topology insights with time-specific switch and traffic telemetry.
Explanation
Correct Answer
A:Advertise and verify the VTEP source-loopback reachability in the underlay routing domain. VXLAN encapsulation depends on routable IP transport between VTEP endpoints before tenant traffic can traverse it. The team is preparing a controlled production change and must preserve fabric reachability.
Incorrect Answers
B:Restore the peer-link and validate keepalive and vPC consistency rather than forcing both peers to forward independently. This concerns vpc peer-link recovery, not vxlan vtep underlay reachability.
C:Align the switchport and LACP parameters across members before attempting to force them into the bundle. This concerns lacp member mismatch, not vxlan vtep underlay reachability.
D:Correlate Nexus Dashboard health and topology insights with time-specific switch and traffic telemetry. This concerns nexus dashboard fabric visibility, not vxlan vtep underlay reachability.
Question 72
Two application teams use the same physical SAN switches but must keep their fabric control traffic separated. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN. Which qualification should the change record include?
- An ordinary Fibre Channel zone does not by itself create a separate control-plane fabric.
- Turning on NPV alone does not create initiator logins if upstream NPIV is unavailable.
- A node-level WWNN cannot always replace a port-specific WWPN expected by the zoning policy.
- Successful ICMP ping does not establish that iSCSI discovery or target authorization is working.
Explanation
Correct Answer
A:An ordinary Fibre Channel zone does not by itself create a separate control-plane fabric. VSANs provide logical fabric separation across shared physical Fibre Channel infrastructure. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN.
Incorrect Answers
B:Turning on NPV alone does not create initiator logins if upstream NPIV is unavailable. This concerns npv uplink fabric services, not VSAN isolation.
C:A node-level WWNN cannot always replace a port-specific WWPN expected by the zoning policy. This concerns wwpn versus wwnn, not VSAN isolation.
D:Successful ICMP ping does not establish that iSCSI discovery or target authorization is working. This concerns iscsi target discovery, not VSAN isolation.
Question 73
A replacement management cluster is being restored from an old UCS backup while recently issued MAC and WWPN pools may differ. The issue reappears on a second managed host, so the team is checking its effective profiles and hardware state. Which intervention most directly addresses the stated condition?
- Validate backup age, identity-pool effects and restore prerequisites before applying the saved configuration.
- Reconcile firmware targets with the Cisco-supported hardware and software compatibility guidance before activation.
- Compare the effective service profile boot policy with the physical and SAN targets visible to the server.
- Create and secure an appropriate management configuration backup before a major maintenance operation.
Explanation
Correct Answer
A:Validate backup age, identity-pool effects and restore prerequisites before applying the saved configuration. Restoring UCS management state can reintroduce policy and identity definitions that differ from current infrastructure. The issue reappears on a second managed host, so the team is checking its effective profiles and hardware state.
Incorrect Answers
B:Reconcile firmware targets with the Cisco-supported hardware and software compatibility guidance before activation. This concerns UCS firmware compatibility, not UCS restore integrity.
C:Compare the effective service profile boot policy with the physical and SAN targets visible to the server. This concerns c-series boot policy alignment, not UCS restore integrity.
D:Create and secure an appropriate management configuration backup before a major maintenance operation. This concerns UCS management backup, not UCS restore integrity.
Question 74
A scheduled PowerShell script manages Intersight but embeds a long-lived API private key directly in source control. A scheduled deployment is pending, and the engineer must validate how the script handles this failure condition. Which explanation most directly accounts for the required correction?
- Distributed AI jobs can be bottlenecked by data-center fabric transport when many nodes exchange bursts of data.
- Shared management APIs need explicit target selection; ambiguous tags can misdirect otherwise syntactically valid changes.
- Credential protection and least privilege reduce the impact of source-code disclosure.
- Terraform compares declared infrastructure with observed resources and can undo unmanaged changes during apply.
Explanation
Correct Answer
C:Credential protection and least privilege reduce the impact of source-code disclosure. A scheduled deployment is pending, and the engineer must validate how the script handles this failure condition.
Incorrect Answers
A:Distributed AI jobs can be bottlenecked by data-center fabric transport when many nodes exchange bursts of data. This concerns ai cluster network congestion, not powershell api token security.
B:Shared management APIs need explicit target selection; ambiguous tags can misdirect otherwise syntactically valid changes. This concerns nexus dashboard automation scope, not powershell api token security.
D:Terraform compares declared infrastructure with observed resources and can undo unmanaged changes during apply. This concerns terraform plan and state, not powershell api token security.
Question 75
An infrastructure engineer changes a Nexus policy directly in production and an upcoming Terraform apply attempts to revert it unexpectedly. The automation change must pass a preproduction test and leave a verifiable audit trail. What should the engineer collect before ruling out other causes?
- Inspect API error details, object Moids, organization membership and profile policy references.
- Inspect command return status, payload schema, missing fields, tracebacks and data freshness.
- Inspect repository history, credential storage, role scope, token rotation and execution audit logs.
- Inspect version-controlled declarations, current plan, state backend locks and out-of-band change record.
Explanation
Correct Answer
D:Inspect version-controlled declarations, current plan, state backend locks and out-of-band change record. These records help distinguish the suspected failure from a superficially similar fault before modifying production. Terraform compares declared infrastructure with observed resources and can undo unmanaged changes during apply. The automation change must pass a preproduction test and leave a verifiable audit trail.
Incorrect Answers
A:Inspect API error details, object Moids, organization membership and profile policy references. That response is associated with intersight policy automation rather than the specific terraform plan and state condition described here. For the stated failure, the preferred action is: Reconcile the approved desired configuration and actual state using plan review and controlled state management. Relevant evidence: Inspect version-controlled declarations, current plan, state backend locks and out-of-band change record. The automation change must pass a preproduction test and leave a verifiable audit trail.
B:Inspect command return status, payload schema, missing fields, tracebacks and data freshness. This concerns on-box python exception handling, not terraform plan and state.
C:Inspect repository history, credential storage, role scope, token rotation and execution audit logs. That response is associated with powershell api token security rather than the specific terraform plan and state condition described here. For the stated failure, the preferred action is: Reconcile the approved desired configuration and actual state using plan review and controlled state management. Relevant evidence: Inspect version-controlled declarations, current plan, state backend locks and out-of-band change record. The automation change must pass a preproduction test and leave a verifiable audit trail.
Question 76
A new MDS FC port channel comes up with only one member while the remaining ports are suspended. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN. What should the engineer do first to address the observed failure?
- Validate physical FC link and initiator FLOGI registration before changing storage-array masking.
- Validate NFS export authorization, client identity and supported protocol settings before altering the SAN fabric.
- Investigate Fibre Channel domain ID assignments and fabric merge requirements before allowing the ISL to join.
- Align interface speed, VSAN mode and compatibility parameters across the intended port-channel members.
Explanation
Correct Answer
D:Align interface speed, VSAN mode and compatibility parameters across the intended port-channel members. Fibre Channel port channels bundle compatible physical links; inconsistent member configuration can suspend interfaces. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN.
Incorrect Answers
A:Validate physical FC link and initiator FLOGI registration before changing storage-array masking. This concerns fibre channel fabric login, not fibre channel port-channel consistency.
B:Validate NFS export authorization, client identity and supported protocol settings before altering the SAN fabric. This concerns nfs export permissions, not fibre channel port-channel consistency.
C:Investigate Fibre Channel domain ID assignments and fabric merge requirements before allowing the ISL to join. This concerns fcid and domain id stability, not fibre channel port-channel consistency.
Question 77
An automated UCS association binds a high-memory workload to a blade that lacks the required adapter capability. Operations is validating the host before approving production workload placement. Which observations would best validate the initial diagnosis?
- Inspect service-profile boot targets, FLOGI, active zones, array masking and target LUN visibility.
- Inspect server inventory, qualification criteria, pool membership and association failures.
- Inspect effective boot order, mapped virtual media state and host boot history.
- Inspect parent templates, derived profiles, policy inheritance and pending association changes.
Explanation
Correct Answer
B:Inspect server inventory, qualification criteria, pool membership and association failures. These records help distinguish the suspected failure from a superficially similar fault before modifying production. Pool qualification policies can restrict association based on compatible server hardware characteristics. Operations is validating the host before approving production workload placement.
Incorrect Answers
A:Inspect service-profile boot targets, FLOGI, active zones, array masking and target LUN visibility. That response is associated with san boot path policy rather than the specific server pool qualification condition described here. For the stated failure, the preferred action is: Correct server-pool qualifications and service-profile placement criteria for the workload's hardware dependencies. Relevant evidence: Inspect server inventory, qualification criteria, pool membership and association failures. Operations is validating the host before approving production workload placement.
C:Inspect effective boot order, mapped virtual media state and host boot history. This concerns boot order and removable media, not server pool qualification.
D:Inspect parent templates, derived profiles, policy inheritance and pending association changes. That response is associated with updating service-profile templates rather than the specific server pool qualification condition described here. For the stated failure, the preferred action is: Correct server-pool qualifications and service-profile placement criteria for the workload's hardware dependencies. Relevant evidence: Inspect server inventory, qualification criteria, pool membership and association failures. Operations is validating the host before approving production workload placement.
Question 78
Two application teams use the same physical SAN switches but must keep their fabric control traffic separated. A storage change board requires a traceable diagnosis before allowing further fabric changes. Which intervention most directly addresses the stated condition?
- Use the correct initiator and target port WWPNs when creating the required zone memberships.
- Run supported upgrade-path and feature-impact checks with a validated rollback plan before starting the update.
- Create and verify separate VSAN assignments for the teams' relevant FC interfaces and zonesets.
- Confirm upstream NPIV support and the NPV uplink VSAN association before modifying host zoning.
Explanation
Correct Answer
C:Create and verify separate VSAN assignments for the teams' relevant FC interfaces and zonesets. VSANs provide logical fabric separation across shared physical Fibre Channel infrastructure. A storage change board requires a traceable diagnosis before allowing further fabric changes.
Incorrect Answers
A:Use the correct initiator and target port WWPNs when creating the required zone memberships. That response is associated with wwpn versus wwnn rather than the specific vsan isolation condition described here. For the stated failure, the preferred action is: Create and verify separate VSAN assignments for the teams' relevant FC interfaces and zonesets. Relevant evidence: Inspect interface-to-VSAN membership, active zonesets, fabric IDs and authorized inter-VSAN designs. A storage change board requires a traceable diagnosis before allowing further fabric changes.
B:Run supported upgrade-path and feature-impact checks with a validated rollback plan before starting the update. This concerns mds nondisruptive upgrade planning, not VSAN isolation.
D:Confirm upstream NPIV support and the NPV uplink VSAN association before modifying host zoning. That response is associated with npv uplink fabric services rather than the specific vsan isolation condition described here. For the stated failure, the preferred action is: Create and verify separate VSAN assignments for the teams' relevant FC interfaces and zonesets. Relevant evidence: Inspect interface-to-VSAN membership, active zonesets, fabric IDs and authorized inter-VSAN designs. A storage change board requires a traceable diagnosis before allowing further fabric changes.
Question 79
A contractor must view Nexus interface health but currently has a role that can change routing and security configuration. A follow-up access review asks the team to validate the same boundary with a controlled negative test. What is the strongest technical basis for the recommended action?
- Microsegmentation can classify subsets of endpoints beyond broad subnet grouping and apply finer-grained controls.
- ACI contracts control permitted communication between endpoint groups, separate from basic endpoint addressing.
- Remote AAA improves centralized administration but must have an appropriate resilient recovery mechanism.
- Role-based access control limits administrators to the commands and resources needed for their work.
Explanation
Correct Answer
D:Role-based access control limits administrators to the commands and resources needed for their work. A follow-up access review asks the team to validate the same boundary with a controlled negative test.
Incorrect Answers
A:Microsegmentation can classify subsets of endpoints beyond broad subnet grouping and apply finer-grained controls. This concerns aci microsegmentation selector, not nx-os administrative RBAC.
B:ACI contracts control permitted communication between endpoint groups, separate from basic endpoint addressing. This concerns aci inter-epg contract, not nx-os administrative RBAC.
C:Remote AAA improves centralized administration but must have an appropriate resilient recovery mechanism. This concerns centralized AAA fallback, not nx-os administrative RBAC.
Question 80
After staging a server firmware upgrade, the adapter and BIOS target versions differ from the supported hardware compatibility matrix. Operations is validating the host before approving production workload placement. What should the engineer collect before ruling out other causes?
- Inspect connected domain registration, Intersight inventory, firmware compatibility and target policy types.
- Inspect cluster failover capacity, target firmware policy, activation impact and host migration status.
- Inspect HCL guidance, firmware policy contents, host driver versions and maintenance impact.
- Inspect applied boot policy, device enumeration, SAN LUN presentation and boot logs.
Explanation
Correct Answer
C:Inspect HCL guidance, firmware policy contents, host driver versions and maintenance impact. These records help distinguish the suspected failure from a superficially similar fault before modifying production. A server and adapter firmware combination must be supported for its hardware and operating environment. Operations is validating the host before approving production workload placement.
Incorrect Answers
A:Inspect connected domain registration, Intersight inventory, firmware compatibility and target policy types. This concerns UCS-x intersight managed mode, not UCS firmware compatibility.
B:Inspect cluster failover capacity, target firmware policy, activation impact and host migration status. This concerns UCS firmware change sequencing, not UCS firmware compatibility.
D:Inspect applied boot policy, device enumeration, SAN LUN presentation and boot logs. This concerns c-series boot policy alignment, not UCS firmware compatibility.
Implementing and Operating Cisco Data Center Core Technologies (DCCOR) (350-601) Practice Tests