Pass Your Cisco 350-601 Exam Easy!

Cisco 350-601 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

350-601 Premium Bundle

$74.99

Cisco 350-601 Premium Bundle

350-601 Premium File: 630 Questions & Answers

Last Update: Nov 17, 2026

350-601 Training Course: 143 Video Lectures

350-601 Bundle gives you unlimited access to "350-601" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
Cisco 350-601 Premium Bundle
Cisco 350-601 Premium Bundle

350-601 Premium File: 630 Questions & Answers

Last Update: Nov 17, 2026

350-601 Training Course: 143 Video Lectures

$74.99

350-601 Bundle gives you unlimited access to "350-601" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

Cisco 350-601 Practice Test 70

Question 690

A Nexus access VLAN with Dynamic ARP Inspection enabled begins dropping legitimate hosts that use static addressing. Security engineering must restore the approved service without relaxing unrelated protection. Which evidence set most directly tests the suspected failure?

  1. Inspect DAI drop counters, DHCP snooping binding table, static host assignments and ARP inspection logs.
  2. Inspect source guard state, DHCP snooping bindings, static exceptions and ingress drop reasons.
  3. Inspect DHCP snooping trust configuration, VLAN enrollment, packet drops and server uplink topology.
  4. Inspect VM attributes, uSeg EPG selectors, endpoint placement and resulting enforced contracts.

Explanation

Correct Answer

A:

Inspect DAI drop counters, DHCP snooping binding table, static host assignments and ARP inspection logs. These records help distinguish the suspected failure from a superficially similar fault before modifying production. DAI verifies ARP bindings using trusted information and may reject legitimate fixed-address hosts without an authorized binding. Security engineering must restore the approved service without relaxing unrelated protection.

Incorrect Answers

B:

Inspect source guard state, DHCP snooping bindings, static exceptions and ingress drop reasons. This concerns first-hop ip/mac spoof defense, not dynamic ARP inspection source of truth.

C:

Inspect DHCP snooping trust configuration, VLAN enrollment, packet drops and server uplink topology. That response is associated with dhcp snooping trusted uplink rather than the specific dynamic arp inspection source of truth condition described here. For the stated failure, the preferred action is: Validate DAI binding sources and configure a supported static ARP ACL or binding for the approved fixed-address hosts. Relevant evidence: Inspect DAI drop counters, DHCP snooping binding table, static host assignments and ARP inspection logs. Security engineering must restore the approved service without relaxing unrelated protection.

D:

Inspect VM attributes, uSeg EPG selectors, endpoint placement and resulting enforced contracts. That response is associated with aci microsegmentation selector rather than the specific dynamic arp inspection source of truth condition described here. For the stated failure, the preferred action is: Validate DAI binding sources and configure a supported static ARP ACL or binding for the approved fixed-address hosts. Relevant evidence: Inspect DAI drop counters, DHCP snooping binding table, static host assignments and ARP inspection logs. Security engineering must restore the approved service without relaxing unrelated protection.

Question 691

An operations team sees sporadic storage-path instability but its monitoring only polls device availability every five minutes. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN. Why is the targeted engineering response justified in this situation?

  1. CRC and link-level errors can indicate transport impairment rather than a storage-array performance limitation.
  2. A physical Fibre Channel ISL can stay up while excluding a particular VSAN from carried fabric traffic.
  3. Topology, fabric events and time-series indicators reveal path problems hidden by simple reachability polling.
  4. Fibre Channel port WWNs identify individual interfaces used by fabric login and zoning policies.

Explanation

Correct Answer

C:

Topology, fabric events and time-series indicators reveal path problems hidden by simple reachability polling. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN.

Incorrect Answers

A:

CRC and link-level errors can indicate transport impairment rather than a storage-array performance limitation. This concerns SAN port error telemetry, not nexus dashboard SAN monitoring.

B:

A physical Fibre Channel ISL can stay up while excluding a particular VSAN from carried fabric traffic. This concerns VSAN trunk mismatch, not nexus dashboard SAN monitoring.

D:

Fibre Channel port WWNs identify individual interfaces used by fabric login and zoning policies. This concerns wwpn versus wwnn, not nexus dashboard SAN monitoring.

Question 692

Latency-sensitive storage traffic shares uplinks with a large backup flow and drops rise during congestion. The issue reappears on a second managed host, so the team is checking its effective profiles and hardware state. Which limitation prevents the team from overgeneralizing this result?

  1. Changing the displayed server name does not resolve a duplicate effective network identifier.
  2. A storage-array LUN mapping cannot make an offline UCS SAN uplink carry the vHBA frames.
  3. A high-priority label inside UCS does not guarantee every upstream switch honors that class.
  4. An existing UCS Manager service-profile template is not automatically an Intersight server-profile resource.

Explanation

Correct Answer

C:

A high-priority label inside UCS does not guarantee every upstream switch honors that class. QoS treatment is effective only when marking, queue allocation and congestion behavior align across involved devices. The issue reappears on a second managed host, so the team is checking its effective profiles and hardware state.

Incorrect Answers

A:

Changing the displayed server name does not resolve a duplicate effective network identifier. This concerns UCS mac pool uniqueness, not UCS network qos policy.

B:

A storage-array LUN mapping cannot make an offline UCS SAN uplink carry the vHBA frames. This concerns SAN connectivity from blade chassis, not UCS network qos policy.

D:

An existing UCS Manager service-profile template is not automatically an Intersight server-profile resource. This concerns UCS-x intersight managed mode, not UCS network qos policy.

Question 693

A VXLAN VTEP can ping peers but no EVPN address-family neighbor is established and remote MAC/IP routes are absent. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence. What should the engineer do first to address the observed failure?

  1. Validate PIM adjacency and the consistent rendezvous-point mapping for the affected multicast group.
  2. Verify OSPFv3 is enabled on the intended interface and that IPv6 link-local reachability and area configuration match.
  3. Reconcile the VMM domain association, hypervisor inventory and EPG port-group mapping.
  4. Check the EVPN address family peering and route-type advertisements before altering the VXLAN data plane.

Explanation

Correct Answer

D:

Check the EVPN address family peering and route-type advertisements before altering the VXLAN data plane. EVPN distributes MAC and IP reachability using MP-BGP; underlay IP reachability alone cannot populate those bindings. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence.

Incorrect Answers

A:

Validate PIM adjacency and the consistent rendezvous-point mapping for the affected multicast group. This concerns PIM multicast rendezvous point, not mp-BGP evpn route learning.

B:

Verify OSPFv3 is enabled on the intended interface and that IPv6 link-local reachability and area configuration match. This concerns ospfv3 IPv6 neighbor discovery, not mp-BGP evpn route learning.

C:

Reconcile the VMM domain association, hypervisor inventory and EPG port-group mapping. This concerns aci vmm association, not mp-BGP evpn route learning.

Question 694

An operator plans an EPLD firmware update during a business peak because a software patch earlier completed without traffic loss. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence. Which limitation prevents the team from overgeneralizing this result?

  1. An RP mapping correction will not compensate for broken RPF reachability to the multicast source.
  2. Past nondisruptive NX-OS upgrades do not establish EPLD update impact on this hardware.
  3. A successful subscription does not guarantee every sensor or transient event is supported by the platform.
  4. An FHRP cannot repair a host's incorrect default gateway or disconnected Layer 2 segment.

Explanation

Correct Answer

B:

Past nondisruptive NX-OS upgrades do not establish EPLD update impact on this hardware. Programmable-logic updates can require component reset or reload even when an unrelated software patch did not. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence.

Incorrect Answers

A:

An RP mapping correction will not compensate for broken RPF reachability to the multicast source. This concerns PIM multicast rendezvous point, not epld firmware maintenance.

C:

A successful subscription does not guarantee every sensor or transient event is supported by the platform. This concerns streaming telemetry health, not epld firmware maintenance.

D:

An FHRP cannot repair a host's incorrect default gateway or disconnected Layer 2 segment. This concerns first-hop gateway failover, not epld firmware maintenance.

Question 695

Receivers on a routed multicast fabric join a group, but sources in another subnet do not reach them after an RP address change. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence. Which limitation prevents the team from overgeneralizing this result?

  1. An RP mapping correction will not compensate for broken RPF reachability to the multicast source.
  2. An FHRP cannot repair a host's incorrect default gateway or disconnected Layer 2 segment.
  3. A working IPv4 OSPFv2 adjacency does not establish IPv6 OSPFv3 reachability by itself.
  4. Data-plane tunnel reachability does not imply correct import or export of the tenant's EVPN routes.

Explanation

Correct Answer

A:

An RP mapping correction will not compensate for broken RPF reachability to the multicast source. PIM sparse mode relies on correct multicast routing state and, where applicable, an RP for shared-tree discovery. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence.

Incorrect Answers

B:

An FHRP cannot repair a host's incorrect default gateway or disconnected Layer 2 segment. This concerns first-hop gateway failover, not PIM multicast rendezvous point.

C:

A working IPv4 OSPFv2 adjacency does not establish IPv6 OSPFv3 reachability by itself. This concerns ospfv3 IPv6 neighbor discovery, not PIM multicast rendezvous point.

D:

Data-plane tunnel reachability does not imply correct import or export of the tenant's EVPN routes. This concerns mp-BGP evpn route learning, not PIM multicast rendezvous point.

Question 696

Two Nexus leaf switches never form an OSPF adjacency after one interface was moved into the backbone while the neighbor still uses a nonbackbone area. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence. Which controlled change is most appropriate given the evidence?

  1. Check the EVPN address family peering and route-type advertisements before altering the VXLAN data plane.
  2. Align the switchport and LACP parameters across members before attempting to force them into the bundle.
  3. Verify OSPFv3 is enabled on the intended interface and that IPv6 link-local reachability and area configuration match.
  4. Align the OSPF interface area and adjacency parameters on both neighbors before changing routing policy.

Explanation

Correct Answer

D:

Align the OSPF interface area and adjacency parameters on both neighbors before changing routing policy. OSPF neighbors must agree on the area and relevant adjacency parameters to reach Full state and exchange routes correctly. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence.

Incorrect Answers

A:

Check the EVPN address family peering and route-type advertisements before altering the VXLAN data plane. This concerns mp-BGP evpn route learning, not OSPF area compatibility.

B:

Align the switchport and LACP parameters across members before attempting to force them into the bundle. This concerns lacp member mismatch, not OSPF area compatibility.

C:

Verify OSPFv3 is enabled on the intended interface and that IPv6 link-local reachability and area configuration match. This concerns ospfv3 IPv6 neighbor discovery, not OSPF area compatibility.

Question 697

Network and storage policies appear correct individually, but a newly claimed UCS domain has no effective fabric uplink configuration. The issue reappears on a second managed host, so the team is checking its effective profiles and hardware state. Which intervention most directly addresses the stated condition?

  1. Assign the approved domain profile with its LAN/SAN uplink policies and verify deployment status.
  2. Manage the chassis through its supported Intersight Managed Mode domain and compatible server-profile policies.
  3. Check organization membership and resource-group scope before broadening permissions globally.
  4. Validate the service-profile SAN boot target WWPN/LUN settings and underlying zoning/masking path.

Explanation

Correct Answer

A:

Assign the approved domain profile with its LAN/SAN uplink policies and verify deployment status. Intersight Managed Mode applies shared domain-level fabric configuration through domain profiles and associated policies. The issue reappears on a second managed host, so the team is checking its effective profiles and hardware state.

Incorrect Answers

B:

Manage the chassis through its supported Intersight Managed Mode domain and compatible server-profile policies. This concerns UCS-x intersight managed mode, not intersight domain profile.

C:

Check organization membership and resource-group scope before broadening permissions globally. This concerns intersight organization scope, not intersight domain profile.

D:

Validate the service-profile SAN boot target WWPN/LUN settings and underlying zoning/masking path. This concerns SAN boot path policy, not intersight domain profile.

Question 698

Storage latency rises whenever a particular MDS uplink is busy, and CRC errors increase on that same port. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN. Why is the targeted engineering response justified in this situation?

  1. VSANs provide logical fabric separation across shared physical Fibre Channel infrastructure.
  2. Device aliases map readable names to FC identifiers and must follow actual hardware identity changes.
  3. NPV proxies initiator logins through an upstream fabric switch, which must support the required virtual-port logins.
  4. CRC and link-level errors can indicate transport impairment rather than a storage-array performance limitation.

Explanation

Correct Answer

D:

CRC and link-level errors can indicate transport impairment rather than a storage-array performance limitation. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN.

Incorrect Answers

A:

VSANs provide logical fabric separation across shared physical Fibre Channel infrastructure. This concerns VSAN isolation, not SAN port error telemetry.

B:

Device aliases map readable names to FC identifiers and must follow actual hardware identity changes. This concerns device alias maintenance, not SAN port error telemetry.

C:

NPV proxies initiator logins through an upstream fabric switch, which must support the required virtual-port logins. This concerns npv uplink fabric services, not SAN port error telemetry.

Question 699

A UCS-X chassis is physically installed but policies authored for a legacy UCS Manager workflow cannot be assigned to its server profiles. The issue reappears on a second managed host, so the team is checking its effective profiles and hardware state. What is the strongest technical basis for the recommended action?

  1. Intersight resource assignment and RBAC limit which infrastructure objects and policies an administrator can manage.
  2. Pool qualification policies can restrict association based on compatible server hardware characteristics.
  3. Intersight Managed Mode applies shared domain-level fabric configuration through domain profiles and associated policies.
  4. UCS-X in Intersight Managed Mode uses Intersight-defined policies and profiles rather than unmodified UCS Manager assumptions.

Explanation

Correct Answer

D:

UCS-X in Intersight Managed Mode uses Intersight-defined policies and profiles rather than unmodified UCS Manager assumptions. The issue reappears on a second managed host, so the team is checking its effective profiles and hardware state.

Incorrect Answers

A:

Intersight resource assignment and RBAC limit which infrastructure objects and policies an administrator can manage. This concerns intersight organization scope, not UCS-x intersight managed mode.

B:

Pool qualification policies can restrict association based on compatible server hardware characteristics. This concerns server pool qualification, not UCS-x intersight managed mode.

C:

Intersight Managed Mode applies shared domain-level fabric configuration through domain profiles and associated policies. This concerns intersight domain profile, not UCS-x intersight managed mode.

Question 700

A Python client receives HTTP 403 from NX-API even though it can reach the management address over HTTPS. A scheduled deployment is pending, and the engineer must validate how the script handles this failure condition. What post-change observation gives the strongest evidence of success?

  1. The authorized client runs the intended read-only API call and receives the expected structured result.
  2. Tests with absent fields return an explicit unknown/error outcome rather than a fabricated healthy metric.
  3. The network change reduces packet loss and congestion while measured training-step throughput improves.
  4. The utility reads the intended local input under the approved Guest Shell permissions and completes the task.

Explanation

Correct Answer

A:

The authorized client runs the intended read-only API call and receives the expected structured result. This result tests the original failure rather than reporting merely that the configuration command was accepted. An HTTP 403 indicates a reachable endpoint has refused the request under its authorization controls. A scheduled deployment is pending, and the engineer must validate how the script handles this failure condition.

Incorrect Answers

B:

Tests with absent fields return an explicit unknown/error outcome rather than a fabricated healthy metric. This concerns on-box python exception handling, not nx-api request authorization.

C:

The network change reduces packet loss and congestion while measured training-step throughput improves. This concerns ai cluster network congestion, not nx-api request authorization.

D:

The utility reads the intended local input under the approved Guest Shell permissions and completes the task. This concerns guest shell isolation, not nx-api request authorization.


Implementing and Operating Cisco Data Center Core Technologies (DCCOR) (350-601) Practice Tests

Purchase Individually

350-601 Premium File

Premium File
350-601 Premium File
630 Q&A
$76.99$69.99

350-601 Training Video Course

Training Course
350-601 Training Video Course
143 Lectures
$27.49$24.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.