Question 240
Two switches exchange frames over an untrusted fiber run, and security requirements call for link-layer encryption. A follow-up access review asks the team to validate the same boundary with a controlled negative test. Which explanation most directly accounts for the required correction?
- IP source validation uses trusted bindings to prevent endpoints from impersonating unassigned source addresses.
- DHCP snooping should accept DHCP server responses from trusted paths while suppressing rogue access-port servers.
- MACsec protects frames on a supported Ethernet link using negotiated encryption and integrity mechanisms.
- Routing-protocol authentication needs overlapping compatible keys during a planned rollover to preserve adjacency.
Explanation
Correct Answer
C:MACsec protects frames on a supported Ethernet link using negotiated encryption and integrity mechanisms. A follow-up access review asks the team to validate the same boundary with a controlled negative test.
Incorrect Answers
A:IP source validation uses trusted bindings to prevent endpoints from impersonating unassigned source addresses. This concerns first-hop ip/mac spoof defense, not MACsec protection scope.
B:DHCP snooping should accept DHCP server responses from trusted paths while suppressing rogue access-port servers. This concerns DHCP snooping trusted uplink, not MACsec protection scope.
D:Routing-protocol authentication needs overlapping compatible keys during a planned rollover to preserve adjacency. This concerns routing protocol keychain rollover, not MACsec protection scope.
Question 241
An IPv6 fabric link has global IPv6 addresses but no OSPFv3 adjacency after a replacement uplink was enabled. The team is preparing a controlled production change and must preserve fabric reachability. Which limitation prevents the team from overgeneralizing this result?
- Assigning an endpoint group cannot substitute for fabric-node discovery and registration.
- Changing a BGP route map cannot repair a mismatched OSPF adjacency at this hop.
- Data-plane tunnel reachability does not imply correct import or export of the tenant's EVPN routes.
- A working IPv4 OSPFv2 adjacency does not establish IPv6 OSPFv3 reachability by itself.
Explanation
Correct Answer
D:A working IPv4 OSPFv2 adjacency does not establish IPv6 OSPFv3 reachability by itself. OSPFv3 neighbors communicate over IPv6 link-local addresses and require compatible protocol and area settings. The team is preparing a controlled production change and must preserve fabric reachability.
Incorrect Answers
A:Assigning an endpoint group cannot substitute for fabric-node discovery and registration. This concerns aci fabric discovery, not ospfv3 IPv6 neighbor discovery.
B:Changing a BGP route map cannot repair a mismatched OSPF adjacency at this hop. That response is associated with ospf area compatibility rather than the specific ospfv3 ipv6 neighbor discovery condition described here. For the stated failure, the preferred action is: Verify OSPFv3 is enabled on the intended interface and that IPv6 link-local reachability and area configuration match. Relevant evidence: Check IPv6 link-local addresses, OSPFv3 interface participation, area settings and protocol packets. The team is preparing a controlled production change and must preserve fabric reachability.
C:Data-plane tunnel reachability does not imply correct import or export of the tenant's EVPN routes. That response is associated with mp-bgp evpn route learning rather than the specific ospfv3 ipv6 neighbor discovery condition described here. For the stated failure, the preferred action is: Verify OSPFv3 is enabled on the intended interface and that IPv6 link-local reachability and area configuration match. Relevant evidence: Check IPv6 link-local addresses, OSPFv3 interface participation, area settings and protocol packets. The team is preparing a controlled production change and must preserve fabric reachability.
Question 242
Fabric merges after a switch replacement intermittently disrupt paths because two switches have a conflicting principal domain assignment. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN. Which explanation most directly accounts for the required correction?
- FCID addressing includes a domain component, and domain conflicts can prevent stable fabric formation.
- Fibre Channel port channels bundle compatible physical links; inconsistent member configuration can suspend interfaces.
- Cisco Fabric Services can distribute feature configuration among fabric switches, subject to feature-specific rules.
- Configured zones and active enforced zoning can differ until the appropriate zoneset is activated.
Explanation
Correct Answer
A:FCID addressing includes a domain component, and domain conflicts can prevent stable fabric formation. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN.
Incorrect Answers
B:Fibre Channel port channels bundle compatible physical links; inconsistent member configuration can suspend interfaces. This concerns fibre channel port-channel consistency, not fcid and domain id stability.
C:Cisco Fabric Services can distribute feature configuration among fabric switches, subject to feature-specific rules. This concerns cisco fabric services distribution, not fcid and domain id stability.
D:Configured zones and active enforced zoning can differ until the appropriate zoneset is activated. This concerns zoneset activation state, not fcid and domain id stability.
Question 243
A SAN supervisor EPLD change is scheduled during peak transaction load without assessing module reload requirements. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN. What caveat is critical when interpreting a successful remediation?
- An ordinary Fibre Channel zone does not by itself create a separate control-plane fabric.
- A redundant fabric cannot protect traffic that was incorrectly attached to a single SAN path.
- A node-level WWNN cannot always replace a port-specific WWPN expected by the zoning policy.
- Turning on NPV alone does not create initiator logins if upstream NPIV is unavailable.
Explanation
Correct Answer
B:A redundant fabric cannot protect traffic that was incorrectly attached to a single SAN path. An EPLD update may reset affected SAN hardware even if a previous NX-OS patch required no outage. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN.
Incorrect Answers
A:An ordinary Fibre Channel zone does not by itself create a separate control-plane fabric. This concerns VSAN isolation, not mds epld update impact.
C:A node-level WWNN cannot always replace a port-specific WWPN expected by the zoning policy. This concerns wwpn versus wwnn, not mds epld update impact.
D:Turning on NPV alone does not create initiator logins if upstream NPIV is unavailable. This concerns npv uplink fabric services, not mds epld update impact.
Question 244
Two switches exchange frames over an untrusted fiber run, and security requirements call for link-layer encryption. Security engineering must restore the approved service without relaxing unrelated protection. Which result would best confirm that the remediation worked?
- The user can operate the approved lab host while production profile changes are denied.
- The adjacency remains Full across the rollover while old credentials are retired after verification.
- The link carries encrypted authenticated traffic and rejects frames without valid link security associations.
- Spoofed source addresses are dropped while approved host traffic continues normally.
Explanation
Correct Answer
C:The link carries encrypted authenticated traffic and rejects frames without valid link security associations. This result tests the original failure rather than reporting merely that the configuration command was accepted. MACsec protects frames on a supported Ethernet link using negotiated encryption and integrity mechanisms. Security engineering must restore the approved service without relaxing unrelated protection.
Incorrect Answers
A:The user can operate the approved lab host while production profile changes are denied. This concerns intersight scoped operations, not MACsec protection scope.
B:The adjacency remains Full across the rollover while old credentials are retired after verification. That response is associated with routing protocol keychain rollover rather than the specific macsec protection scope condition described here. For the stated failure, the preferred action is: Enable and validate supported MACsec on both compatible link endpoints with an approved keying design. Relevant evidence: Inspect platform capability, MACsec session state, MKA status, cipher suite and protected traffic counters. Security engineering must restore the approved service without relaxing unrelated protection.
D:Spoofed source addresses are dropped while approved host traffic continues normally. That response is associated with first-hop ip/mac spoof defense rather than the specific macsec protection scope condition described here. For the stated failure, the preferred action is: Enable and validate supported MACsec on both compatible link endpoints with an approved keying design. Relevant evidence: Inspect platform capability, MACsec session state, MKA status, cipher suite and protected traffic counters. Security engineering must restore the approved service without relaxing unrelated protection.
Question 245
A storage administrator must inspect FC zoning health but an inherited MDS role grants access to fabric-wide reconfiguration. Security engineering must restore the approved service without relaxing unrelated protection. What information should be inspected before the change is applied?
- Inspect role definitions, AAA authorization, zone management privileges and administrative audit logs.
- Inspect port-security policy, learned WWPNs, interface events and attempted fabric logins.
- Inspect switch WWN bindings, ISL neighbors, fabric membership and enforcement violation logs.
- Inspect keychain definitions, active key lifetimes, authentication error logs and neighbor state.
Explanation
Correct Answer
A:Inspect role definitions, AAA authorization, zone management privileges and administrative audit logs. These records help distinguish the suspected failure from a superficially similar fault before modifying production. Storage network RBAC limits configuration actions independently of physical access to SAN switches. Security engineering must restore the approved service without relaxing unrelated protection.
Incorrect Answers
B:Inspect port-security policy, learned WWPNs, interface events and attempted fabric logins. That response is associated with fibre channel port security rather than the specific mds san administrative control condition described here. For the stated failure, the preferred action is: Replace the inherited privilege with a least-privilege SAN read/monitor role and confirm AAA enforcement. Relevant evidence: Inspect role definitions, AAA authorization, zone management privileges and administrative audit logs. Security engineering must restore the approved service without relaxing unrelated protection.
C:Inspect switch WWN bindings, ISL neighbors, fabric membership and enforcement violation logs. That response is associated with fabric binding membership rather than the specific mds san administrative control condition described here. For the stated failure, the preferred action is: Replace the inherited privilege with a least-privilege SAN read/monitor role and confirm AAA enforcement. Relevant evidence: Inspect role definitions, AAA authorization, zone management privileges and administrative audit logs. Security engineering must restore the approved service without relaxing unrelated protection.
D:Inspect keychain definitions, active key lifetimes, authentication error logs and neighbor state. This concerns routing protocol keychain rollover, not mds SAN administrative control.
Question 246
A replacement ACI leaf remains undiscovered after connecting to the spine and giving it management power. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence. Which intervention most directly addresses the stated condition?
- Reconcile the VMM domain association, hypervisor inventory and EPG port-group mapping.
- Validate fabric discovery prerequisites, physical connectivity and node registration in APIC.
- Align EVPN route-target import policy and local tenant VRF configuration for the relevant VNI.
- Verify the VLAN pool, domain, AEP and interface policy group associations serving the endpoint port.
Explanation
Correct Answer
B:Validate fabric discovery prerequisites, physical connectivity and node registration in APIC. An ACI fabric must discover and register infrastructure nodes before normal tenant policy deployment. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence.
Incorrect Answers
A:Reconcile the VMM domain association, hypervisor inventory and EPG port-group mapping. This concerns aci vmm association, not aci fabric discovery.
C:Align EVPN route-target import policy and local tenant VRF configuration for the relevant VNI. This concerns mp-BGP tenant route import, not aci fabric discovery.
D:Verify the VLAN pool, domain, AEP and interface policy group associations serving the endpoint port. This concerns aci access policy chain, not aci fabric discovery.
Question 247
Two Nexus leaf switches never form an OSPF adjacency after one interface was moved into the backbone while the neighbor still uses a nonbackbone area. The team is preparing a controlled production change and must preserve fabric reachability. What should the operator avoid assuming from the observed state?
- A working keepalive is not a replacement data path for the vPC peer-link.
- Data-plane tunnel reachability does not imply correct import or export of the tenant's EVPN routes.
- A working IPv4 OSPFv2 adjacency does not establish IPv6 OSPFv3 reachability by itself.
- Changing a BGP route map cannot repair a mismatched OSPF adjacency at this hop.
Explanation
Correct Answer
D:Changing a BGP route map cannot repair a mismatched OSPF adjacency at this hop. OSPF neighbors must agree on the area and relevant adjacency parameters to reach Full state and exchange routes correctly. The team is preparing a controlled production change and must preserve fabric reachability.
Incorrect Answers
A:A working keepalive is not a replacement data path for the vPC peer-link. This concerns vpc peer-link recovery, not OSPF area compatibility.
B:Data-plane tunnel reachability does not imply correct import or export of the tenant's EVPN routes. That response is associated with mp-bgp evpn route learning rather than the specific ospf area compatibility condition described here. For the stated failure, the preferred action is: Align the OSPF interface area and adjacency parameters on both neighbors before changing routing policy. Relevant evidence: Inspect neighbor state, interface area assignments, hello parameters and interface MTU on both peers. The team is preparing a controlled production change and must preserve fabric reachability.
C:A working IPv4 OSPFv2 adjacency does not establish IPv6 OSPFv3 reachability by itself. That response is associated with ospfv3 ipv6 neighbor discovery rather than the specific ospf area compatibility condition described here. For the stated failure, the preferred action is: Align the OSPF interface area and adjacency parameters on both neighbors before changing routing policy. Relevant evidence: Inspect neighbor state, interface area assignments, hello parameters and interface MTU on both peers. The team is preparing a controlled production change and must preserve fabric reachability.
Question 248
Two switches exchange frames over an untrusted fiber run, and security requirements call for link-layer encryption. Security engineering must restore the approved service without relaxing unrelated protection. Which intervention most directly addresses the stated condition?
- Coordinate authentication key IDs, algorithms and valid lifetimes across both peers before retiring the old key.
- Enable and validate supported MACsec on both compatible link endpoints with an approved keying design.
- Enforce an appropriate source-binding validation feature consistent with the recorded DHCP or static bindings.
- Mark only the verified DHCP-server-facing interface as trusted and validate the snooping VLAN scope.
Explanation
Correct Answer
B:Enable and validate supported MACsec on both compatible link endpoints with an approved keying design. MACsec protects frames on a supported Ethernet link using negotiated encryption and integrity mechanisms. Security engineering must restore the approved service without relaxing unrelated protection.
Incorrect Answers
A:Coordinate authentication key IDs, algorithms and valid lifetimes across both peers before retiring the old key. That response is associated with routing protocol keychain rollover rather than the specific macsec protection scope condition described here. For the stated failure, the preferred action is: Enable and validate supported MACsec on both compatible link endpoints with an approved keying design. Relevant evidence: Inspect platform capability, MACsec session state, MKA status, cipher suite and protected traffic counters. Security engineering must restore the approved service without relaxing unrelated protection.
C:Enforce an appropriate source-binding validation feature consistent with the recorded DHCP or static bindings. That response is associated with first-hop ip/mac spoof defense rather than the specific macsec protection scope condition described here. For the stated failure, the preferred action is: Enable and validate supported MACsec on both compatible link endpoints with an approved keying design. Relevant evidence: Inspect platform capability, MACsec session state, MKA status, cipher suite and protected traffic counters. Security engineering must restore the approved service without relaxing unrelated protection.
D:Mark only the verified DHCP-server-facing interface as trusted and validate the snooping VLAN scope. This concerns DHCP snooping trusted uplink, not MACsec protection scope.
Question 249
A hypervisor installation leaves a virtual media image first in a UCS boot policy, causing repeated setup after power cycles. The issue reappears on a second managed host, so the team is checking its effective profiles and hardware state. What should the engineer do first to address the observed failure?
- Restore the intended production boot-device order and detach temporary install media from the active policy.
- Validate the service-profile SAN boot target WWPN/LUN settings and underlying zoning/masking path.
- Correct server-pool qualifications and service-profile placement criteria for the workload's hardware dependencies.
- Stage and review the template relationship and scope before applying an impactful shared-policy change.
Explanation
Correct Answer
A:Restore the intended production boot-device order and detach temporary install media from the active policy. A persistent virtual-media boot entry can supersede the production storage or disk target on later restarts. The issue reappears on a second managed host, so the team is checking its effective profiles and hardware state.
Incorrect Answers
B:Validate the service-profile SAN boot target WWPN/LUN settings and underlying zoning/masking path. This concerns SAN boot path policy, not boot order and removable media.
C:Correct server-pool qualifications and service-profile placement criteria for the workload's hardware dependencies. This concerns server pool qualification, not boot order and removable media.
D:Stage and review the template relationship and scope before applying an impactful shared-policy change. This concerns updating service-profile templates, not boot order and removable media.
Question 250
An infrastructure engineer changes a Nexus policy directly in production and an upcoming Terraform apply attempts to revert it unexpectedly. The automation change must pass a preproduction test and leave a verifiable audit trail. What caveat is critical when interpreting a successful remediation?
- Increasing API retry frequency cannot resolve a cross-organization authorization mismatch.
- Manually editing Terraform state without verifying real resources can conceal drift rather than fix it.
- A timeout is not proof that the server failed to apply the initial request.
- Hiding a plaintext key in an obfuscated PowerShell string is not equivalent to secure secret storage.
Explanation
Correct Answer
B:Manually editing Terraform state without verifying real resources can conceal drift rather than fix it. Terraform compares declared infrastructure with observed resources and can undo unmanaged changes during apply. The automation change must pass a preproduction test and leave a verifiable audit trail.
Incorrect Answers
A:Increasing API retry frequency cannot resolve a cross-organization authorization mismatch. That response is associated with intersight policy automation rather than the specific terraform plan and state condition described here. For the stated failure, the preferred action is: Reconcile the approved desired configuration and actual state using plan review and controlled state management. Relevant evidence: Inspect version-controlled declarations, current plan, state backend locks and out-of-band change record. The automation change must pass a preproduction test and leave a verifiable audit trail.
C:A timeout is not proof that the server failed to apply the initial request. This concerns rest api retries and idempotence, not terraform plan and state.
D:Hiding a plaintext key in an obfuscated PowerShell string is not equivalent to secure secret storage. That response is associated with powershell api token security rather than the specific terraform plan and state condition described here. For the stated failure, the preferred action is: Reconcile the approved desired configuration and actual state using plan review and controlled state management. Relevant evidence: Inspect version-controlled declarations, current plan, state backend locks and out-of-band change record. The automation change must pass a preproduction test and leave a verifiable audit trail.
Implementing and Operating Cisco Data Center Core Technologies (DCCOR) (350-601) Practice Tests