Pass Your Cisco 350-601 Exam Easy!

Cisco 350-601 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

350-601 Premium Bundle

$74.99

Cisco 350-601 Premium Bundle

350-601 Premium File: 630 Questions & Answers

Last Update: Nov 17, 2026

350-601 Training Course: 143 Video Lectures

350-601 Bundle gives you unlimited access to "350-601" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
Cisco 350-601 Premium Bundle
Cisco 350-601 Premium Bundle

350-601 Premium File: 630 Questions & Answers

Last Update: Nov 17, 2026

350-601 Training Course: 143 Video Lectures

$74.99

350-601 Bundle gives you unlimited access to "350-601" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

Cisco 350-601 Practice Test 13

Question 120

A SAN change places multiple unrelated hosts and several targets in one broad Fibre Channel zone to simplify access. A storage change board requires a traceable diagnosis before allowing further fabric changes. What should the operator avoid assuming from the observed state?

  1. A permissive zone may increase unintended device visibility even when array LUN masking also exists.
  2. Saving a zoneset definition alone does not establish that it is the enforced active zoning policy.
  3. A node-level WWNN cannot always replace a port-specific WWPN expected by the zoning policy.
  4. Assuming that every local command is distributed automatically can leave peers inconsistent.

Explanation

Correct Answer

A:

A permissive zone may increase unintended device visibility even when array LUN masking also exists. Tightly scoped FC zones limit which initiators can discover or communicate with designated targets. A storage change board requires a traceable diagnosis before allowing further fabric changes.

Incorrect Answers

B:

Saving a zoneset definition alone does not establish that it is the enforced active zoning policy. That response is associated with zoneset activation state rather than the specific single-initiator zoning condition described here. For the stated failure, the preferred action is: Apply a least-privilege zoning design with an individual initiator and explicitly approved target members per zone. Relevant evidence: Inspect active zone members, initiator WWPNs, target WWPNs and intended host-to-LUN access matrices. A storage change board requires a traceable diagnosis before allowing further fabric changes.

C:

A node-level WWNN cannot always replace a port-specific WWPN expected by the zoning policy. This concerns wwpn versus wwnn, not single-initiator zoning.

D:

Assuming that every local command is distributed automatically can leave peers inconsistent. That response is associated with cisco fabric services distribution rather than the specific single-initiator zoning condition described here. For the stated failure, the preferred action is: Apply a least-privilege zoning design with an individual initiator and explicitly approved target members per zone. Relevant evidence: Inspect active zone members, initiator WWPNs, target WWPNs and intended host-to-LUN access matrices. A storage change board requires a traceable diagnosis before allowing further fabric changes.

Question 121

Updating a UCS updating-template appears to change vNIC settings on more blades than intended. Operations is validating the host before approving production workload placement. Which controlled change is most appropriate given the evidence?

  1. Compare the effective service profile boot policy with the physical and SAN targets visible to the server.
  2. Stage and review the template relationship and scope before applying an impactful shared-policy change.
  3. Restore the intended production boot-device order and detach temporary install media from the active policy.
  4. Correct server-pool qualifications and service-profile placement criteria for the workload's hardware dependencies.

Explanation

Correct Answer

B:

Stage and review the template relationship and scope before applying an impactful shared-policy change. Updating templates can propagate modifications to associated service profiles; change impact depends on associations. Operations is validating the host before approving production workload placement.

Incorrect Answers

A:

Compare the effective service profile boot policy with the physical and SAN targets visible to the server. This concerns c-series boot policy alignment, not updating service-profile templates.

C:

Restore the intended production boot-device order and detach temporary install media from the active policy. That response is associated with boot order and removable media rather than the specific updating service-profile templates condition described here. For the stated failure, the preferred action is: Stage and review the template relationship and scope before applying an impactful shared-policy change. Relevant evidence: Inspect parent templates, derived profiles, policy inheritance and pending association changes. Operations is validating the host before approving production workload placement.

D:

Correct server-pool qualifications and service-profile placement criteria for the workload's hardware dependencies. That response is associated with server pool qualification rather than the specific updating service-profile templates condition described here. For the stated failure, the preferred action is: Stage and review the template relationship and scope before applying an impactful shared-policy change. Relevant evidence: Inspect parent templates, derived profiles, policy inheritance and pending association changes. Operations is validating the host before approving production workload placement.

Question 122

During an OSPF key rollover, one peer begins rejecting signed hello packets even though the links remain up. Security engineering must restore the approved service without relaxing unrelated protection. What should the engineer do first to address the observed failure?

  1. Configure approved Fibre Channel port-security bindings and verify rejection of unregistered identities.
  2. Coordinate authentication key IDs, algorithms and valid lifetimes across both peers before retiring the old key.
  3. Enable and validate supported MACsec on both compatible link endpoints with an approved keying design.
  4. Enforce an appropriate source-binding validation feature consistent with the recorded DHCP or static bindings.

Explanation

Correct Answer

B:

Coordinate authentication key IDs, algorithms and valid lifetimes across both peers before retiring the old key. Routing-protocol authentication needs overlapping compatible keys during a planned rollover to preserve adjacency. Security engineering must restore the approved service without relaxing unrelated protection.

Incorrect Answers

A:

Configure approved Fibre Channel port-security bindings and verify rejection of unregistered identities. This concerns fibre channel port security, not routing protocol keychain rollover.

C:

Enable and validate supported MACsec on both compatible link endpoints with an approved keying design. That response is associated with macsec protection scope rather than the specific routing protocol keychain rollover condition described here. For the stated failure, the preferred action is: Coordinate authentication key IDs, algorithms and valid lifetimes across both peers before retiring the old key. Relevant evidence: Inspect keychain definitions, active key lifetimes, authentication error logs and neighbor state. Security engineering must restore the approved service without relaxing unrelated protection.

D:

Enforce an appropriate source-binding validation feature consistent with the recorded DHCP or static bindings. That response is associated with first-hop ip/mac spoof defense rather than the specific routing protocol keychain rollover condition described here. For the stated failure, the preferred action is: Coordinate authentication key IDs, algorithms and valid lifetimes across both peers before retiring the old key. Relevant evidence: Inspect keychain definitions, active key lifetimes, authentication error logs and neighbor state. Security engineering must restore the approved service without relaxing unrelated protection.

Question 123

A server sees intermittent TCP resets, but an administrator only has coarse interface error counters. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence. What post-change observation gives the strongest evidence of success?

  1. Traffic flows identify the actual high-volume conversations and support a targeted capacity or policy fix.
  2. Remote tenant prefixes appear in the intended VRF and routed reachability is confirmed end to end.
  3. The collector receives fresh, structured device state and alerts on a deliberately induced test event.
  4. Captured packets reproduce the reset sequence and identify which endpoint initiated it.

Explanation

Correct Answer

D:

Captured packets reproduce the reset sequence and identify which endpoint initiated it. This result tests the original failure rather than reporting merely that the configuration command was accepted. SPAN copies selected frames for packet inspection when protocol-level behavior is not visible in summarized counters. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence.

Incorrect Answers

A:

Traffic flows identify the actual high-volume conversations and support a targeted capacity or policy fix. This concerns netflow traffic attribution, not span packet-level diagnosis.

B:

Remote tenant prefixes appear in the intended VRF and routed reachability is confirmed end to end. This concerns mp-BGP tenant route import, not span packet-level diagnosis.

C:

The collector receives fresh, structured device state and alerts on a deliberately induced test event. This concerns streaming telemetry health, not span packet-level diagnosis.

Question 124

A VXLAN tenant sees ARP requests at one VTEP but not at another after a change to head-end replication peers. The team is preparing a controlled production change and must preserve fabric reachability. Which technical principle best explains the recommended response?

  1. Unknown-unicast, broadcast and multicast frames require an appropriate VXLAN replication or multicast transport method.
  2. Programmable-logic updates can require component reset or reload even when an unrelated software patch did not.
  3. Nondisruptive software upgrade support is platform, topology and image-path dependent and must be verified.
  4. Integrated routing and bridging requires consistent L3 VNI and tenant routing context for inter-subnet forwarding.

Explanation

Correct Answer

A:

Unknown-unicast, broadcast and multicast frames require an appropriate VXLAN replication or multicast transport method. The team is preparing a controlled production change and must preserve fabric reachability.

Incorrect Answers

B:

Programmable-logic updates can require component reset or reload even when an unrelated software patch did not. This concerns epld firmware maintenance, not bum replication behavior.

C:

Nondisruptive software upgrade support is platform, topology and image-path dependent and must be verified. This concerns nexus issu eligibility, not bum replication behavior.

D:

Integrated routing and bridging requires consistent L3 VNI and tenant routing context for inter-subnet forwarding. This concerns evpn vni-to-vrf mapping, not bum replication behavior.

Question 125

An ISL trunk is up but one VSAN loses connectivity because it is missing from the allowed or operational VSAN set. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN. Which intervention most directly addresses the stated condition?

  1. Create and verify separate VSAN assignments for the teams' relevant FC interfaces and zonesets.
  2. Check the CFS distribution scope and commit or activation workflow for the affected feature.
  3. Use the correct initiator and target port WWPNs when creating the required zone memberships.
  4. Align trunk allowed VSANs and verify the operational VSAN membership end to end.

Explanation

Correct Answer

D:

Align trunk allowed VSANs and verify the operational VSAN membership end to end. A physical Fibre Channel ISL can stay up while excluding a particular VSAN from carried fabric traffic. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN.

Incorrect Answers

A:

Create and verify separate VSAN assignments for the teams' relevant FC interfaces and zonesets. This concerns VSAN isolation, not VSAN trunk mismatch.

B:

Check the CFS distribution scope and commit or activation workflow for the affected feature. This concerns cisco fabric services distribution, not VSAN trunk mismatch.

C:

Use the correct initiator and target port WWPNs when creating the required zone memberships. This concerns wwpn versus wwnn, not VSAN trunk mismatch.

Question 126

A fabric dashboard displays healthy switch reachability but a service experiences consistent high-latency paths. The team is preparing a controlled production change and must preserve fabric reachability. Which controlled change is most appropriate given the evidence?

  1. Correlate Nexus Dashboard health and topology insights with time-specific switch and traffic telemetry.
  2. Align the OSPF interface area and adjacency parameters on both neighbors before changing routing policy.
  3. Check the EVPN address family peering and route-type advertisements before altering the VXLAN data plane.
  4. Verify OSPFv3 is enabled on the intended interface and that IPv6 link-local reachability and area configuration match.

Explanation

Correct Answer

A:

Correlate Nexus Dashboard health and topology insights with time-specific switch and traffic telemetry. Fabric assurance tools combine topology and operational observations but require data correlation to identify service causes. The team is preparing a controlled production change and must preserve fabric reachability.

Incorrect Answers

B:

Align the OSPF interface area and adjacency parameters on both neighbors before changing routing policy. This concerns OSPF area compatibility, not nexus dashboard fabric visibility.

C:

Check the EVPN address family peering and route-type advertisements before altering the VXLAN data plane. This concerns mp-BGP evpn route learning, not nexus dashboard fabric visibility.

D:

Verify OSPFv3 is enabled on the intended interface and that IPv6 link-local reachability and area configuration match. This concerns ospfv3 IPv6 neighbor discovery, not nexus dashboard fabric visibility.

Question 127

An on-box NX-OS Python maintenance script interprets a missing interface counter as zero and incorrectly reports healthy operation. A scheduled deployment is pending, and the engineer must validate how the script handles this failure condition. What is the best next implementation or troubleshooting step?

  1. Verify the API user role, requested method and endpoint authorization before changing transport routing.
  2. Validate API responses and explicitly handle missing data before calculating health status.
  3. Validate the DHCP options, image/script availability and bootstrap transport path before restarting POAP.
  4. Check API operation semantics and implement safe read-before-create or idempotent reconciliation behavior.

Explanation

Correct Answer

B:

Validate API responses and explicitly handle missing data before calculating health status. Automation must distinguish unavailable telemetry from a real numeric zero to avoid false success reports. A scheduled deployment is pending, and the engineer must validate how the script handles this failure condition.

Incorrect Answers

A:

Verify the API user role, requested method and endpoint authorization before changing transport routing. This concerns nx-api request authorization, not on-box python exception handling.

C:

Validate the DHCP options, image/script availability and bootstrap transport path before restarting POAP. This concerns poap bootstrap dependencies, not on-box python exception handling.

D:

Check API operation semantics and implement safe read-before-create or idempotent reconciliation behavior. This concerns rest api retries and idempotence, not on-box python exception handling.

Question 128

After staging a server firmware upgrade, the adapter and BIOS target versions differ from the supported hardware compatibility matrix. Operations is validating the host before approving production workload placement. Which intervention most directly addresses the stated condition?

  1. Validate that fabric A and fabric B interfaces have independent working uplinks and correctly bound vNICs.
  2. Separate the relevant MAC pool ranges and confirm all instantiated identities are unique before attachment.
  3. Align the vNIC template VLAN membership and upstream VLAN allowance across the chosen fabric path.
  4. Reconcile firmware targets with the Cisco-supported hardware and software compatibility guidance before activation.

Explanation

Correct Answer

D:

Reconcile firmware targets with the Cisco-supported hardware and software compatibility guidance before activation. A server and adapter firmware combination must be supported for its hardware and operating environment. Operations is validating the host before approving production workload placement.

Incorrect Answers

A:

Validate that fabric A and fabric B interfaces have independent working uplinks and correctly bound vNICs. This concerns UCS fabric redundancy, not UCS firmware compatibility.

B:

Separate the relevant MAC pool ranges and confirm all instantiated identities are unique before attachment. This concerns UCS mac pool uniqueness, not UCS firmware compatibility.

C:

Align the vNIC template VLAN membership and upstream VLAN allowance across the chosen fabric path. This concerns UCS VLAN pool and template, not UCS firmware compatibility.

Question 129

An Ansible fabric playbook reports hundreds of changed interfaces on every run even when no administrator intended a configuration change. A scheduled deployment is pending, and the engineer must validate how the script handles this failure condition. Which observations would best validate the initial diagnosis?

  1. Inspect Ansible change output, module behavior, running configurations and intended-state version control.
  2. Inspect target site IDs, inventory assignments, proposed diffs and authorizations.
  3. Inspect response metadata, page limits, next tokens, error responses and known inventory counts.
  4. Inspect DHCP offers, bootstrap URL, DNS/routing, file server availability and switch console logs.

Explanation

Correct Answer

A:

Inspect Ansible change output, module behavior, running configurations and intended-state version control. These records help distinguish the suspected failure from a superficially similar fault before modifying production. Declarative, state-aware automation should converge on the desired configuration without producing repeated unnecessary changes. A scheduled deployment is pending, and the engineer must validate how the script handles this failure condition.

Incorrect Answers

B:

Inspect target site IDs, inventory assignments, proposed diffs and authorizations. This concerns nexus dashboard automation scope, not ansible idempotent templates.

C:

Inspect response metadata, page limits, next tokens, error responses and known inventory counts. This concerns python api pagination, not ansible idempotent templates.

D:

Inspect DHCP offers, bootstrap URL, DNS/routing, file server availability and switch console logs. This concerns poap bootstrap dependencies, not ansible idempotent templates.

Question 130

A maintenance script needs to run on a fixed schedule but an engineer proposes an EEM syslog trigger instead. The automation change must pass a preproduction test and leave a verifiable audit trail. Which qualification should the change record include?

  1. An EEM event match does not prove a remediation command is safe or authorized to execute automatically.
  2. Enabling Guest Shell does not grant arbitrary host or network filesystem access by default.
  3. Valid API credentials do not make a bulk template safe for every visible site.
  4. A scheduler cannot guarantee success if script dependencies or device privileges are missing.

Explanation

Correct Answer

D:

A scheduler cannot guarantee success if script dependencies or device privileges are missing. Scheduled tasks follow time-based execution rather than requiring a spontaneous syslog event to fire. The automation change must pass a preproduction test and leave a verifiable audit trail.

Incorrect Answers

A:

An EEM event match does not prove a remediation command is safe or authorized to execute automatically. That response is associated with eem syslog-triggered remediation rather than the specific nx-os scheduler jobs condition described here. For the stated failure, the preferred action is: Use NX-OS scheduling capability with the appropriate job definition and maintenance safeguards. Relevant evidence: Inspect job definition, scheduler timetable, execution status and change-window policy. The automation change must pass a preproduction test and leave a verifiable audit trail.

B:

Enabling Guest Shell does not grant arbitrary host or network filesystem access by default. That response is associated with guest shell isolation rather than the specific nx-os scheduler jobs condition described here. For the stated failure, the preferred action is: Use NX-OS scheduling capability with the appropriate job definition and maintenance safeguards. Relevant evidence: Inspect job definition, scheduler timetable, execution status and change-window policy. The automation change must pass a preproduction test and leave a verifiable audit trail.

C:

Valid API credentials do not make a bulk template safe for every visible site. This concerns nexus dashboard automation scope, not nx-os scheduler jobs.


Implementing and Operating Cisco Data Center Core Technologies (DCCOR) (350-601) Practice Tests

Purchase Individually

350-601 Premium File

Premium File
350-601 Premium File
630 Q&A
$76.99$69.99

350-601 Training Video Course

Training Course
350-601 Training Video Course
143 Lectures
$27.49$24.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.