Question 100
An administrator assumes every MDS image update is nondisruptive because the switch has redundant supervisors. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN. How should the implementation be validated against the original failure?
- Error counters stop increasing after the physical fix and application storage latency improves.
- The documented update completes within its approved impact envelope and host paths remain correctly redundant.
- The initiator appears in FLOGI with an FCID and can proceed to authorized name-server discovery.
- A test fault creates a correctly correlated alert and the affected path recovers without unauthorized zone changes.
Explanation
Correct Answer
B:The documented update completes within its approved impact envelope and host paths remain correctly redundant. This result tests the original failure rather than reporting merely that the configuration command was accepted. SAN nondisruptive upgrade support depends on exact software path, hardware redundancy and active feature constraints. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN.
Incorrect Answers
A:Error counters stop increasing after the physical fix and application storage latency improves. This concerns SAN port error telemetry, not mds nondisruptive upgrade planning.
C:The initiator appears in FLOGI with an FCID and can proceed to authorized name-server discovery. This concerns fibre channel fabric login, not mds nondisruptive upgrade planning.
D:A test fault creates a correctly correlated alert and the affected path recovers without unauthorized zone changes. This concerns nexus dashboard SAN monitoring, not mds nondisruptive upgrade planning.
Question 101
A blade has two configured vNICs, yet a failed fabric interconnect isolates all management and application traffic. The issue reappears on a second managed host, so the team is checking its effective profiles and hardware state. What information should be inspected before the change is applied?
- Inspect effective boot order, mapped virtual media state and host boot history.
- Inspect IOM link state, chassis faults, discovery status and fabric interconnect logs.
- Inspect vNIC fabric bindings, uplink port channels, failover policy and upstream switch forwarding.
- Inspect effective vNIC templates, VLAN object assignments, LAN uplink trunk allowances and fault logs.
Explanation
Correct Answer
C:Inspect vNIC fabric bindings, uplink port channels, failover policy and upstream switch forwarding. These records help distinguish the suspected failure from a superficially similar fault before modifying production. Logical dual vNIC definitions provide resilience only when each has a functioning independent physical fabric path. The issue reappears on a second managed host, so the team is checking its effective profiles and hardware state.
Incorrect Answers
A:Inspect effective boot order, mapped virtual media state and host boot history. This concerns boot order and removable media, not UCS fabric redundancy.
B:Inspect IOM link state, chassis faults, discovery status and fabric interconnect logs. This concerns UCS blade chassis IOM discovery, not UCS fabric redundancy.
D:Inspect effective vNIC templates, VLAN object assignments, LAN uplink trunk allowances and fault logs. This concerns UCS VLAN pool and template, not UCS fabric redundancy.
Question 102
A storage administrator zones a host using a node name although the fabric login is registered with a different port identifier. A storage change board requires a traceable diagnosis before allowing further fabric changes. How should the implementation be validated against the original failure?
- The active zoneset contains the actual registered port WWPNs and the host discovers its target.
- The required VSAN becomes operational across the trunk and its name-server and login functions recover.
- Each team's initiators and targets register only within the approved VSAN and access boundaries.
- The alias resolves to the correct active target identity and the host's allowed storage paths work.
Explanation
Correct Answer
A:The active zoneset contains the actual registered port WWPNs and the host discovers its target. This result tests the original failure rather than reporting merely that the configuration command was accepted. Fibre Channel port WWNs identify individual interfaces used by fabric login and zoning policies. A storage change board requires a traceable diagnosis before allowing further fabric changes.
Incorrect Answers
B:The required VSAN becomes operational across the trunk and its name-server and login functions recover. That response is associated with vsan trunk mismatch rather than the specific wwpn versus wwnn condition described here. For the stated failure, the preferred action is: Use the correct initiator and target port WWPNs when creating the required zone memberships. Relevant evidence: Inspect FLOGI port WWPNs, host vHBA identities, target port IDs and zoning entries. A storage change board requires a traceable diagnosis before allowing further fabric changes.
C:Each team's initiators and targets register only within the approved VSAN and access boundaries. That response is associated with vsan isolation rather than the specific wwpn versus wwnn condition described here. For the stated failure, the preferred action is: Use the correct initiator and target port WWPNs when creating the required zone memberships. Relevant evidence: Inspect FLOGI port WWPNs, host vHBA identities, target port IDs and zoning entries. A storage change board requires a traceable diagnosis before allowing further fabric changes.
D:The alias resolves to the correct active target identity and the host's allowed storage paths work. This concerns device alias maintenance, not wwpn versus wwnn.
Question 103
Fabric merges after a switch replacement intermittently disrupt paths because two switches have a conflicting principal domain assignment. A storage change board requires a traceable diagnosis before allowing further fabric changes. Which qualification should the change record include?
- A permissive zone may increase unintended device visibility even when array LUN masking also exists.
- Renaming device aliases does not resolve an underlying Fibre Channel domain ID conflict.
- Forcing suspended links into service without correcting compatibility can destabilize a SAN fabric.
- Assuming that every local command is distributed automatically can leave peers inconsistent.
Explanation
Correct Answer
B:Renaming device aliases does not resolve an underlying Fibre Channel domain ID conflict. FCID addressing includes a domain component, and domain conflicts can prevent stable fabric formation. A storage change board requires a traceable diagnosis before allowing further fabric changes.
Incorrect Answers
A:A permissive zone may increase unintended device visibility even when array LUN masking also exists. This concerns single-initiator zoning, not fcid and domain id stability.
C:Forcing suspended links into service without correcting compatibility can destabilize a SAN fabric. That response is associated with fibre channel port-channel consistency rather than the specific fcid and domain id stability condition described here. For the stated failure, the preferred action is: Investigate Fibre Channel domain ID assignments and fabric merge requirements before allowing the ISL to join. Relevant evidence: Inspect fcdomain status, assigned domain IDs, ISL events and active FCID allocations. A storage change board requires a traceable diagnosis before allowing further fabric changes.
D:Assuming that every local command is distributed automatically can leave peers inconsistent. That response is associated with cisco fabric services distribution rather than the specific fcid and domain id stability condition described here. For the stated failure, the preferred action is: Investigate Fibre Channel domain ID assignments and fabric merge requirements before allowing the ISL to join. Relevant evidence: Inspect fcdomain status, assigned domain IDs, ISL events and active FCID allocations. A storage change board requires a traceable diagnosis before allowing further fabric changes.
Question 104
An engineer plans simultaneous firmware activation on every blade supporting a critical cluster with no evacuation plan. Operations is validating the host before approving production workload placement. Which intervention most directly addresses the stated condition?
- Use a staged maintenance sequence with workload evacuation, redundancy validation and documented rollback criteria.
- Review UCS QoS classes and upstream priority handling across the entire network path.
- Validate the UCS SAN uplink, vHBA fabric pinning and VSAN assignment before modifying LUN masks.
- Assign WWPNs from a nonoverlapping pool and validate effective per-fabric vHBA identities.
Explanation
Correct Answer
A:Use a staged maintenance sequence with workload evacuation, redundancy validation and documented rollback criteria. Rolling hardware maintenance reduces service disruption only if dependent workloads can tolerate sequential host removal. Operations is validating the host before approving production workload placement.
Incorrect Answers
B:Review UCS QoS classes and upstream priority handling across the entire network path. This concerns UCS network qos policy, not UCS firmware change sequencing.
C:Validate the UCS SAN uplink, vHBA fabric pinning and VSAN assignment before modifying LUN masks. This concerns SAN connectivity from blade chassis, not UCS firmware change sequencing.
D:Assign WWPNs from a nonoverlapping pool and validate effective per-fabric vHBA identities. This concerns wwpn pool allocation, not UCS firmware change sequencing.
Question 105
A VXLAN VTEP can ping peers but no EVPN address-family neighbor is established and remote MAC/IP routes are absent. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence. Which test result best demonstrates restoration of the intended behavior?
- The target encapsulation is programmed on the intended port and endpoint learning succeeds.
- Remote MAC/IP routes appear in the EVPN database and tested inter-VTEP traffic succeeds.
- An OSPFv3 Full adjacency forms and IPv6 prefixes become reachable through the correct next hop.
- Receivers begin receiving the intended group traffic and multicast routing entries show the expected incoming interface.
Explanation
Correct Answer
B:Remote MAC/IP routes appear in the EVPN database and tested inter-VTEP traffic succeeds. This result tests the original failure rather than reporting merely that the configuration command was accepted. EVPN distributes MAC and IP reachability using MP-BGP; underlay IP reachability alone cannot populate those bindings. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence.
Incorrect Answers
A:The target encapsulation is programmed on the intended port and endpoint learning succeeds. This concerns aci access policy chain, not mp-BGP evpn route learning.
C:An OSPFv3 Full adjacency forms and IPv6 prefixes become reachable through the correct next hop. This concerns ospfv3 IPv6 neighbor discovery, not mp-BGP evpn route learning.
D:Receivers begin receiving the intended group traffic and multicast routing entries show the expected incoming interface. This concerns PIM multicast rendezvous point, not mp-BGP evpn route learning.
Question 106
A service-profile template update adds a workload VLAN but newly associated blades cannot send tagged frames for that network. Operations is validating the host before approving production workload placement. What information should be inspected before the change is applied?
- Inspect vNIC fabric bindings, uplink port channels, failover policy and upstream switch forwarding.
- Inspect server inventory, qualification criteria, pool membership and association failures.
- Inspect effective vNIC templates, VLAN object assignments, LAN uplink trunk allowances and fault logs.
- Inspect MAC pool definitions, reservations, effective vNIC addresses and upstream MAC tables.
Explanation
Correct Answer
C:Inspect effective vNIC templates, VLAN object assignments, LAN uplink trunk allowances and fault logs. These records help distinguish the suspected failure from a superficially similar fault before modifying production. A vNIC may be configured for a VLAN that the fabric and upstream trunks still do not carry. Operations is validating the host before approving production workload placement.
Incorrect Answers
A:Inspect vNIC fabric bindings, uplink port channels, failover policy and upstream switch forwarding. That response is associated with ucs fabric redundancy rather than the specific ucs vlan pool and template condition described here. For the stated failure, the preferred action is: Align the vNIC template VLAN membership and upstream VLAN allowance across the chosen fabric path. Relevant evidence: Inspect effective vNIC templates, VLAN object assignments, LAN uplink trunk allowances and fault logs. Operations is validating the host before approving production workload placement.
B:Inspect server inventory, qualification criteria, pool membership and association failures. This concerns server pool qualification, not UCS VLAN pool and template.
D:Inspect MAC pool definitions, reservations, effective vNIC addresses and upstream MAC tables. That response is associated with ucs mac pool uniqueness rather than the specific ucs vlan pool and template condition described here. For the stated failure, the preferred action is: Align the vNIC template VLAN membership and upstream VLAN allowance across the chosen fabric path. Relevant evidence: Inspect effective vNIC templates, VLAN object assignments, LAN uplink trunk allowances and fault logs. Operations is validating the host before approving production workload placement.
Question 107
A Nexus switch upgrade has been described as nondisruptive, but the running hardware and target image are not confirmed as ISSU compatible. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence. What should the operator avoid assuming from the observed state?
- Calling an image upgrade ISSU does not guarantee zero packet loss or no feature-specific disruption.
- Data-plane tunnel reachability does not imply correct import or export of the tenant's EVPN routes.
- Changing a BGP route map cannot repair a mismatched OSPF adjacency at this hop.
- A working IPv4 OSPFv2 adjacency does not establish IPv6 OSPFv3 reachability by itself.
Explanation
Correct Answer
A:Calling an image upgrade ISSU does not guarantee zero packet loss or no feature-specific disruption. Nondisruptive software upgrade support is platform, topology and image-path dependent and must be verified. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence.
Incorrect Answers
B:Data-plane tunnel reachability does not imply correct import or export of the tenant's EVPN routes. This concerns mp-BGP evpn route learning, not nexus issu eligibility.
C:Changing a BGP route map cannot repair a mismatched OSPF adjacency at this hop. This concerns OSPF area compatibility, not nexus issu eligibility.
D:A working IPv4 OSPFv2 adjacency does not establish IPv6 OSPFv3 reachability by itself. This concerns ospfv3 IPv6 neighbor discovery, not nexus issu eligibility.
Question 108
A scheduled PowerShell script manages Intersight but embeds a long-lived API private key directly in source control. The automation change must pass a preproduction test and leave a verifiable audit trail. Which qualification should the change record include?
- Enabling Guest Shell does not grant arbitrary host or network filesystem access by default.
- Hiding a plaintext key in an obfuscated PowerShell string is not equivalent to secure secret storage.
- Valid API credentials do not make a bulk template safe for every visible site.
- Manually editing Terraform state without verifying real resources can conceal drift rather than fix it.
Explanation
Correct Answer
B:Hiding a plaintext key in an obfuscated PowerShell string is not equivalent to secure secret storage. Credential protection and least privilege reduce the impact of source-code disclosure. The automation change must pass a preproduction test and leave a verifiable audit trail.
Incorrect Answers
A:Enabling Guest Shell does not grant arbitrary host or network filesystem access by default. This concerns guest shell isolation, not powershell api token security.
C:Valid API credentials do not make a bulk template safe for every visible site. That response is associated with nexus dashboard automation scope rather than the specific powershell api token security condition described here. For the stated failure, the preferred action is: Move secrets to a supported secure secret store and scope the automation identity to required API permissions. Relevant evidence: Inspect repository history, credential storage, role scope, token rotation and execution audit logs. The automation change must pass a preproduction test and leave a verifiable audit trail.
D:Manually editing Terraform state without verifying real resources can conceal drift rather than fix it. That response is associated with terraform plan and state rather than the specific powershell api token security condition described here. For the stated failure, the preferred action is: Move secrets to a supported secure secret store and scope the automation identity to required API permissions. Relevant evidence: Inspect repository history, credential storage, role scope, token rotation and execution audit logs. The automation change must pass a preproduction test and leave a verifiable audit trail.
Question 109
An engineer plans simultaneous firmware activation on every blade supporting a critical cluster with no evacuation plan. Operations is validating the host before approving production workload placement. What caveat is critical when interpreting a successful remediation?
- Successful one-time installation does not ensure the persistent boot policy has been corrected.
- Mirroring an inactive or wrong vNIC path cannot prove what happened to the actual workload traffic.
- Raising VM CPU reservations cannot override a chassis hardware thermal-protection mechanism.
- A high-availability label does not guarantee there is sufficient spare capacity for concurrent outages.
Explanation
Correct Answer
D:A high-availability label does not guarantee there is sufficient spare capacity for concurrent outages. Rolling hardware maintenance reduces service disruption only if dependent workloads can tolerate sequential host removal. Operations is validating the host before approving production workload placement.
Incorrect Answers
A:Successful one-time installation does not ensure the persistent boot policy has been corrected. This concerns boot order and removable media, not UCS firmware change sequencing.
B:Mirroring an inactive or wrong vNIC path cannot prove what happened to the actual workload traffic. This concerns compute traffic span, not UCS firmware change sequencing.
C:Raising VM CPU reservations cannot override a chassis hardware thermal-protection mechanism. This concerns chassis power and thermal monitoring, not UCS firmware change sequencing.
Question 110
An ACI endpoint attaches to a leaf interface but never receives its expected VLAN encapsulation because the domain is not bound to the access policy chain. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence. Which controlled change is most appropriate given the evidence?
- Verify the VLAN pool, domain, AEP and interface policy group associations serving the endpoint port.
- Compare actual configuration to a version-controlled golden baseline and restore approved differences through change control.
- Reconcile the VMM domain association, hypervisor inventory and EPG port-group mapping.
- Validate fabric discovery prerequisites, physical connectivity and node registration in APIC.
Explanation
Correct Answer
A:Verify the VLAN pool, domain, AEP and interface policy group associations serving the endpoint port. ACI access policies rely on a consistent domain and attachment chain before deploying the correct encapsulation. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence.
Incorrect Answers
B:Compare actual configuration to a version-controlled golden baseline and restore approved differences through change control. This concerns fabric configuration drift, not aci access policy chain.
C:Reconcile the VMM domain association, hypervisor inventory and EPG port-group mapping. This concerns aci vmm association, not aci access policy chain.
D:Validate fabric discovery prerequisites, physical connectivity and node registration in APIC. This concerns aci fabric discovery, not aci access policy chain.
Implementing and Operating Cisco Data Center Core Technologies (DCCOR) (350-601) Practice Tests