Pass Your Juniper JN0-664 Exam Easy!

Juniper JN0-664 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

JN0-664 Premium VCE File

Juniper JN0-664 Premium File

96 Questions & Answers

Last Update: Oct 12, 2026

$69.99

JN0-664 Bundle gives you unlimited access to "JN0-664" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
JN0-664 Premium VCE File
Juniper JN0-664 Premium File

96 Questions & Answers

Last Update: Oct 12, 2026

$69.99

Juniper JN0-664 Exam Bundle gives you unlimited access to "JN0-664" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

Juniper JN0-664 Practice Test 95

Question 940

During a managed service audit, an HPE Juniper Networking engineer investigates this situation: A dual-homed Ethernet site is intended to be one EVPN Ethernet segment but its PEs advertise different ESIs, so remote devices do not treat it as shared. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Test PE failure recovery with live MAC entries, not only a ping to the surviving PE.
  2. Fail over the DF during testing and check for duplicate frames or blackholes.
  3. Audit VPN identifiers before consolidating L2VPN routes on shared reflectors.
  4. Validate ESI consistency before enabling dual-homed production traffic.

Explanation

Correct Answer

D:

Validate ESI consistency before enabling dual-homed production traffic. The control limits repetition of the described root condition: EVPN multihoming relies on consistent Ethernet segment identification among PEs attached to the same segment. During audits, confirm: Both peers advertise a matching ESI and remote control-plane state recognizes the multi-attached segment.

Incorrect Answers

A:

Test PE failure recovery with live MAC entries, not only a ping to the surviving PE. This is a plausible preventive practice for a different Layer 2 VPNs condition, specifically EVPN multihoming mass withdrawal. EVPN multihoming can signal a PE or segment failure so remote PEs quickly invalidate affected MAC reachability. In this scenario, however, the distinguishing issue is EVPN Ethernet segment identifier mismatch and the confirming observation is: Both peers advertise a matching ESI and remote control-plane state recognizes the multi-attached segment.

B:

Fail over the DF during testing and check for duplicate frames or blackholes. This is a plausible preventive practice for a different Layer 2 VPNs condition, specifically EVPN designated forwarder election. EVPN multihoming uses designated forwarder selection to prevent duplicate BUM forwarding to a shared Ethernet segment. In this scenario, however, the distinguishing issue is EVPN Ethernet segment identifier mismatch and the confirming observation is: Both peers advertise a matching ESI and remote control-plane state recognizes the multi-attached segment.

C:

Audit VPN identifiers before consolidating L2VPN routes on shared reflectors. This is a plausible preventive practice for a different Layer 2 VPNs condition, specifically BGP Layer 2 VPN route distinguisher. BGP-signaled L2VPN routes need distinguishable VPN identifiers so unrelated overlapping customer service advertisements do not collide. In this scenario, however, the distinguishing issue is EVPN Ethernet segment identifier mismatch and the confirming observation is: Both peers advertise a matching ESI and remote control-plane state recognizes the multi-attached segment.

Question 941

During a control-plane reliability review, an HPE Juniper Networking engineer investigates this situation: A virtual machine moves between EVPN sites but some remote PEs keep forwarding to the old PE because they miss or ignore the updated MAC mobility information. Which targeted check most directly distinguishes the likely cause before a configuration change?

  1. Inspect newer EVPN MAC/IP route sequence and withdrawal of stale reachability.
  2. Inspect Ethernet segment reachability advertisements and fast convergence or mass-withdraw behavior.
  3. Inspect split-horizon forwarding treatment for traffic received from VPLS pseudowires.
  4. Inspect VPLS MAC move history and physical loop or dual-attachment behavior.

Explanation

Correct Answer

A:

Inspect newer EVPN MAC/IP route sequence and withdrawal of stale reachability. This check examines the decisive condition for EVPN MAC mobility sequence before any unrelated changes are made. The underlying mechanism is: EVPN MAC mobility procedures identify the newer location of a moving MAC and help remote PEs replace old forwarding state. The confirming observation is: Remote PEs resolve the mobile MAC to the current PE after processing the new route.

Incorrect Answers

B:

Inspect Ethernet segment reachability advertisements and fast convergence or mass-withdraw behavior. This is a plausible diagnostic check for a different Layer 2 VPNs condition, specifically EVPN multihoming mass withdrawal. EVPN multihoming can signal a PE or segment failure so remote PEs quickly invalidate affected MAC reachability. In this scenario, however, the distinguishing issue is EVPN MAC mobility sequence and the confirming observation is: Remote PEs resolve the mobile MAC to the current PE after processing the new route.

C:

Inspect split-horizon forwarding treatment for traffic received from VPLS pseudowires. This is a plausible diagnostic check for a different Layer 2 VPNs condition, specifically VPLS split-horizon protection. VPLS needs loop-prevention controls such as split-horizon behavior when forwarding between remote pseudowires. In this scenario, however, the distinguishing issue is EVPN MAC mobility sequence and the confirming observation is: Remote PEs resolve the mobile MAC to the current PE after processing the new route.

D:

Inspect VPLS MAC move history and physical loop or dual-attachment behavior. This is a plausible diagnostic check for a different Layer 2 VPNs condition, specifically VPLS MAC move instability. Multipoint Layer 2 forwarding can become unstable when the same source MAC appears alternately from multiple ports or pseudowires. In this scenario, however, the distinguishing issue is EVPN MAC mobility sequence and the confirming observation is: Remote PEs resolve the mobile MAC to the current PE after processing the new route.

Question 942

During a service-provider escalation, an HPE Juniper Networking engineer investigates this situation: A virtual machine moves between EVPN sites but some remote PEs keep forwarding to the old PE because they miss or ignore the updated MAC mobility information. Which routing or service mechanism best explains the reported behavior?

  1. EVPN multihoming can signal a PE or segment failure so remote PEs quickly invalidate affected MAC reachability.
  2. EVPN MAC mobility procedures identify the newer location of a moving MAC and help remote PEs replace old forwarding state.
  3. Multipoint Layer 2 forwarding can become unstable when the same source MAC appears alternately from multiple ports or pseudowires.
  4. VPLS needs loop-prevention controls such as split-horizon behavior when forwarding between remote pseudowires.

Explanation

Correct Answer

B:

EVPN MAC mobility procedures identify the newer location of a moving MAC and help remote PEs replace old forwarding state. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: Remote PEs resolve the mobile MAC to the current PE after processing the new route. The targeted correction is: Restore correct MAC mobility signaling and clear only proven stale entries if necessary.

Incorrect Answers

A:

EVPN multihoming can signal a PE or segment failure so remote PEs quickly invalidate affected MAC reachability. This is a plausible protocol explanation for a different Layer 2 VPNs condition, specifically EVPN multihoming mass withdrawal. EVPN multihoming can signal a PE or segment failure so remote PEs quickly invalidate affected MAC reachability. In this scenario, however, the distinguishing issue is EVPN MAC mobility sequence and the confirming observation is: Remote PEs resolve the mobile MAC to the current PE after processing the new route.

C:

Multipoint Layer 2 forwarding can become unstable when the same source MAC appears alternately from multiple ports or pseudowires. This is a plausible protocol explanation for a different Layer 2 VPNs condition, specifically VPLS MAC move instability. Multipoint Layer 2 forwarding can become unstable when the same source MAC appears alternately from multiple ports or pseudowires. In this scenario, however, the distinguishing issue is EVPN MAC mobility sequence and the confirming observation is: Remote PEs resolve the mobile MAC to the current PE after processing the new route.

D:

VPLS needs loop-prevention controls such as split-horizon behavior when forwarding between remote pseudowires. This is a plausible protocol explanation for a different Layer 2 VPNs condition, specifically VPLS split-horizon protection. VPLS needs loop-prevention controls such as split-horizon behavior when forwarding between remote pseudowires. In this scenario, however, the distinguishing issue is EVPN MAC mobility sequence and the confirming observation is: Remote PEs resolve the mobile MAC to the current PE after processing the new route.

Question 943

During a new PE-router service turn-up, an HPE Juniper Networking engineer investigates this situation: A virtual machine moves between EVPN sites but some remote PEs keep forwarding to the old PE because they miss or ignore the updated MAC mobility information. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?

  1. Remote forwarding moves away from the failed PE after the segment withdrawal or protection event.
  2. The customer MAC learns on the expected attachment without repeated moves after loop removal.
  3. Remote PEs resolve the mobile MAC to the current PE after processing the new route.
  4. Test frames cross the intended CE attachments once without repeated amplification.

Explanation

Correct Answer

C:

Remote PEs resolve the mobile MAC to the current PE after processing the new route. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: EVPN MAC mobility procedures identify the newer location of a moving MAC and help remote PEs replace old forwarding state.

Incorrect Answers

A:

Remote forwarding moves away from the failed PE after the segment withdrawal or protection event. This is a plausible observed evidence for a different Layer 2 VPNs condition, specifically EVPN multihoming mass withdrawal. EVPN multihoming can signal a PE or segment failure so remote PEs quickly invalidate affected MAC reachability. In this scenario, however, the distinguishing issue is EVPN MAC mobility sequence and the confirming observation is: Remote PEs resolve the mobile MAC to the current PE after processing the new route.

B:

The customer MAC learns on the expected attachment without repeated moves after loop removal. This is a plausible observed evidence for a different Layer 2 VPNs condition, specifically VPLS MAC move instability. Multipoint Layer 2 forwarding can become unstable when the same source MAC appears alternately from multiple ports or pseudowires. In this scenario, however, the distinguishing issue is EVPN MAC mobility sequence and the confirming observation is: Remote PEs resolve the mobile MAC to the current PE after processing the new route.

D:

Test frames cross the intended CE attachments once without repeated amplification. This is a plausible observed evidence for a different Layer 2 VPNs condition, specifically VPLS split-horizon protection. VPLS needs loop-prevention controls such as split-horizon behavior when forwarding between remote pseudowires. In this scenario, however, the distinguishing issue is EVPN MAC mobility sequence and the confirming observation is: Remote PEs resolve the mobile MAC to the current PE after processing the new route.

Question 944

During a customer VPN change window, an HPE Juniper Networking engineer investigates this situation: A virtual machine moves between EVPN sites but some remote PEs keep forwarding to the old PE because they miss or ignore the updated MAC mobility information. Which response or focused corrective action best addresses this situation without changing unrelated components?

  1. Restore the supported Ethernet segment failure signaling and backup forwarding path.
  2. Correct customer bridging topology or supported dual-homing protections before resetting MAC tables.
  3. Restore the supported VPLS split-horizon or equivalent loop-free topology behavior.
  4. Restore correct MAC mobility signaling and clear only proven stale entries if necessary.

Explanation

Correct Answer

D:

Restore correct MAC mobility signaling and clear only proven stale entries if necessary. The change addresses the root behavior described here: EVPN MAC mobility procedures identify the newer location of a moving MAC and help remote PEs replace old forwarding state. Verify success with: Remote PEs resolve the mobile MAC to the current PE after processing the new route.

Incorrect Answers

A:

Restore the supported Ethernet segment failure signaling and backup forwarding path. This is a plausible configuration or operational fix for a different Layer 2 VPNs condition, specifically EVPN multihoming mass withdrawal. EVPN multihoming can signal a PE or segment failure so remote PEs quickly invalidate affected MAC reachability. In this scenario, however, the distinguishing issue is EVPN MAC mobility sequence and the confirming observation is: Remote PEs resolve the mobile MAC to the current PE after processing the new route.

B:

Correct customer bridging topology or supported dual-homing protections before resetting MAC tables. This is a plausible configuration or operational fix for a different Layer 2 VPNs condition, specifically VPLS MAC move instability. Multipoint Layer 2 forwarding can become unstable when the same source MAC appears alternately from multiple ports or pseudowires. In this scenario, however, the distinguishing issue is EVPN MAC mobility sequence and the confirming observation is: Remote PEs resolve the mobile MAC to the current PE after processing the new route.

C:

Restore the supported VPLS split-horizon or equivalent loop-free topology behavior. This is a plausible configuration or operational fix for a different Layer 2 VPNs condition, specifically VPLS split-horizon protection. VPLS needs loop-prevention controls such as split-horizon behavior when forwarding between remote pseudowires. In this scenario, however, the distinguishing issue is EVPN MAC mobility sequence and the confirming observation is: Remote PEs resolve the mobile MAC to the current PE after processing the new route.

Question 945

During a core-routing migration rehearsal, an HPE Juniper Networking engineer investigates this situation: A virtual machine moves between EVPN sites but some remote PEs keep forwarding to the old PE because they miss or ignore the updated MAC mobility information. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Exercise host mobility while watching route age and forwarding convergence.
  2. Test PE failure recovery with live MAC entries, not only a ping to the surviving PE.
  3. Alert on rapid MAC moves and validate redundant CPE topology.
  4. Test broadcast storm containment before admitting additional VPLS PEs.

Explanation

Correct Answer

A:

Exercise host mobility while watching route age and forwarding convergence. The control limits repetition of the described root condition: EVPN MAC mobility procedures identify the newer location of a moving MAC and help remote PEs replace old forwarding state. During audits, confirm: Remote PEs resolve the mobile MAC to the current PE after processing the new route.

Incorrect Answers

B:

Test PE failure recovery with live MAC entries, not only a ping to the surviving PE. This is a plausible preventive practice for a different Layer 2 VPNs condition, specifically EVPN multihoming mass withdrawal. EVPN multihoming can signal a PE or segment failure so remote PEs quickly invalidate affected MAC reachability. In this scenario, however, the distinguishing issue is EVPN MAC mobility sequence and the confirming observation is: Remote PEs resolve the mobile MAC to the current PE after processing the new route.

C:

Alert on rapid MAC moves and validate redundant CPE topology. This is a plausible preventive practice for a different Layer 2 VPNs condition, specifically VPLS MAC move instability. Multipoint Layer 2 forwarding can become unstable when the same source MAC appears alternately from multiple ports or pseudowires. In this scenario, however, the distinguishing issue is EVPN MAC mobility sequence and the confirming observation is: Remote PEs resolve the mobile MAC to the current PE after processing the new route.

D:

Test broadcast storm containment before admitting additional VPLS PEs. This is a plausible preventive practice for a different Layer 2 VPNs condition, specifically VPLS split-horizon protection. VPLS needs loop-prevention controls such as split-horizon behavior when forwarding between remote pseudowires. In this scenario, however, the distinguishing issue is EVPN MAC mobility sequence and the confirming observation is: Remote PEs resolve the mobile MAC to the current PE after processing the new route.

Question 946

During a customer service restoration, an HPE Juniper Networking engineer investigates this situation: A customer has accidentally assigned the same MAC to hosts in two sites and BGP EVPN repeatedly alternates the remote MAC owner. Which targeted check most directly distinguishes the likely cause before a configuration change?

  1. Inspect VPLS MAC learning tables, aging and broadcast/unknown-unicast flood counters.
  2. Inspect duplicate MAC detection and mobility events before assuming a legitimate workload move.
  3. Inspect VPLS MAC move history and physical loop or dual-attachment behavior.
  4. Inspect local and remote site IDs and the BGP L2VPN route connection mapping.

Explanation

Correct Answer

B:

Inspect duplicate MAC detection and mobility events before assuming a legitimate workload move. This check examines the decisive condition for EVPN duplicate MAC protection before any unrelated changes are made. The underlying mechanism is: Repeated conflicting MAC advertisements can indicate duplicate endpoint identity rather than valid sequential migration. The confirming observation is: The duplicate source is corrected and MAC ownership stabilizes on one authorized site.

Incorrect Answers

A:

Inspect VPLS MAC learning tables, aging and broadcast/unknown-unicast flood counters. This is a plausible diagnostic check for a different Layer 2 VPNs condition, specifically VPLS flooding unknown unicast. VPLS provides multipoint Ethernet bridging, so traffic to unknown MAC addresses can be flooded within the VPN forwarding domain. In this scenario, however, the distinguishing issue is EVPN duplicate MAC protection and the confirming observation is: The duplicate source is corrected and MAC ownership stabilizes on one authorized site.

C:

Inspect VPLS MAC move history and physical loop or dual-attachment behavior. This is a plausible diagnostic check for a different Layer 2 VPNs condition, specifically VPLS MAC move instability. Multipoint Layer 2 forwarding can become unstable when the same source MAC appears alternately from multiple ports or pseudowires. In this scenario, however, the distinguishing issue is EVPN duplicate MAC protection and the confirming observation is: The duplicate source is corrected and MAC ownership stabilizes on one authorized site.

D:

Inspect local and remote site IDs and the BGP L2VPN route connection mapping. This is a plausible diagnostic check for a different Layer 2 VPNs condition, specifically BGP L2VPN site ID collision. BGP L2VPN site identifiers help map distinct site attachments into the signaled service topology. In this scenario, however, the distinguishing issue is EVPN duplicate MAC protection and the confirming observation is: The duplicate source is corrected and MAC ownership stabilizes on one authorized site.

Question 947

During an edge-to-core validation, an HPE Juniper Networking engineer investigates this situation: A customer has accidentally assigned the same MAC to hosts in two sites and BGP EVPN repeatedly alternates the remote MAC owner. Which routing or service mechanism best explains the reported behavior?

  1. BGP L2VPN site identifiers help map distinct site attachments into the signaled service topology.
  2. VPLS provides multipoint Ethernet bridging, so traffic to unknown MAC addresses can be flooded within the VPN forwarding domain.
  3. Repeated conflicting MAC advertisements can indicate duplicate endpoint identity rather than valid sequential migration.
  4. Multipoint Layer 2 forwarding can become unstable when the same source MAC appears alternately from multiple ports or pseudowires.

Explanation

Correct Answer

C:

Repeated conflicting MAC advertisements can indicate duplicate endpoint identity rather than valid sequential migration. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: The duplicate source is corrected and MAC ownership stabilizes on one authorized site. The targeted correction is: Resolve the duplicate MAC condition and use supported detection or suppression controls.

Incorrect Answers

A:

BGP L2VPN site identifiers help map distinct site attachments into the signaled service topology. This is a plausible protocol explanation for a different Layer 2 VPNs condition, specifically BGP L2VPN site ID collision. BGP L2VPN site identifiers help map distinct site attachments into the signaled service topology. In this scenario, however, the distinguishing issue is EVPN duplicate MAC protection and the confirming observation is: The duplicate source is corrected and MAC ownership stabilizes on one authorized site.

B:

VPLS provides multipoint Ethernet bridging, so traffic to unknown MAC addresses can be flooded within the VPN forwarding domain. This is a plausible protocol explanation for a different Layer 2 VPNs condition, specifically VPLS flooding unknown unicast. VPLS provides multipoint Ethernet bridging, so traffic to unknown MAC addresses can be flooded within the VPN forwarding domain. In this scenario, however, the distinguishing issue is EVPN duplicate MAC protection and the confirming observation is: The duplicate source is corrected and MAC ownership stabilizes on one authorized site.

D:

Multipoint Layer 2 forwarding can become unstable when the same source MAC appears alternately from multiple ports or pseudowires. This is a plausible protocol explanation for a different Layer 2 VPNs condition, specifically VPLS MAC move instability. Multipoint Layer 2 forwarding can become unstable when the same source MAC appears alternately from multiple ports or pseudowires. In this scenario, however, the distinguishing issue is EVPN duplicate MAC protection and the confirming observation is: The duplicate source is corrected and MAC ownership stabilizes on one authorized site.

Question 948

During a high-availability validation, an HPE Juniper Networking engineer investigates this situation: A customer has accidentally assigned the same MAC to hosts in two sites and BGP EVPN repeatedly alternates the remote MAC owner. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?

  1. Each site advertises its planned unique identity and the remote connection mapping is unambiguous.
  2. MAC learning stabilizes and flooding reduces while known unicast frames target the correct remote site.
  3. The customer MAC learns on the expected attachment without repeated moves after loop removal.
  4. The duplicate source is corrected and MAC ownership stabilizes on one authorized site.

Explanation

Correct Answer

D:

The duplicate source is corrected and MAC ownership stabilizes on one authorized site. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: Repeated conflicting MAC advertisements can indicate duplicate endpoint identity rather than valid sequential migration.

Incorrect Answers

A:

Each site advertises its planned unique identity and the remote connection mapping is unambiguous. This is a plausible observed evidence for a different Layer 2 VPNs condition, specifically BGP L2VPN site ID collision. BGP L2VPN site identifiers help map distinct site attachments into the signaled service topology. In this scenario, however, the distinguishing issue is EVPN duplicate MAC protection and the confirming observation is: The duplicate source is corrected and MAC ownership stabilizes on one authorized site.

B:

MAC learning stabilizes and flooding reduces while known unicast frames target the correct remote site. This is a plausible observed evidence for a different Layer 2 VPNs condition, specifically VPLS flooding unknown unicast. VPLS provides multipoint Ethernet bridging, so traffic to unknown MAC addresses can be flooded within the VPN forwarding domain. In this scenario, however, the distinguishing issue is EVPN duplicate MAC protection and the confirming observation is: The duplicate source is corrected and MAC ownership stabilizes on one authorized site.

C:

The customer MAC learns on the expected attachment without repeated moves after loop removal. This is a plausible observed evidence for a different Layer 2 VPNs condition, specifically VPLS MAC move instability. Multipoint Layer 2 forwarding can become unstable when the same source MAC appears alternately from multiple ports or pseudowires. In this scenario, however, the distinguishing issue is EVPN duplicate MAC protection and the confirming observation is: The duplicate source is corrected and MAC ownership stabilizes on one authorized site.

Question 949

During a Junos routing maintenance review, an HPE Juniper Networking engineer investigates this situation: A customer has accidentally assigned the same MAC to hosts in two sites and BGP EVPN repeatedly alternates the remote MAC owner. Which response or focused corrective action best addresses this situation without changing unrelated components?

  1. Resolve the duplicate MAC condition and use supported detection or suppression controls.
  2. Assign unique service site IDs and align site ranges according to the intended topology.
  3. Fix MAC learning or excessive churn rather than disabling legitimate service discovery broadly.
  4. Correct customer bridging topology or supported dual-homing protections before resetting MAC tables.

Explanation

Correct Answer

A:

Resolve the duplicate MAC condition and use supported detection or suppression controls. The change addresses the root behavior described here: Repeated conflicting MAC advertisements can indicate duplicate endpoint identity rather than valid sequential migration. Verify success with: The duplicate source is corrected and MAC ownership stabilizes on one authorized site.

Incorrect Answers

B:

Assign unique service site IDs and align site ranges according to the intended topology. This is a plausible configuration or operational fix for a different Layer 2 VPNs condition, specifically BGP L2VPN site ID collision. BGP L2VPN site identifiers help map distinct site attachments into the signaled service topology. In this scenario, however, the distinguishing issue is EVPN duplicate MAC protection and the confirming observation is: The duplicate source is corrected and MAC ownership stabilizes on one authorized site.

C:

Fix MAC learning or excessive churn rather than disabling legitimate service discovery broadly. This is a plausible configuration or operational fix for a different Layer 2 VPNs condition, specifically VPLS flooding unknown unicast. VPLS provides multipoint Ethernet bridging, so traffic to unknown MAC addresses can be flooded within the VPN forwarding domain. In this scenario, however, the distinguishing issue is EVPN duplicate MAC protection and the confirming observation is: The duplicate source is corrected and MAC ownership stabilizes on one authorized site.

D:

Correct customer bridging topology or supported dual-homing protections before resetting MAC tables. This is a plausible configuration or operational fix for a different Layer 2 VPNs condition, specifically VPLS MAC move instability. Multipoint Layer 2 forwarding can become unstable when the same source MAC appears alternately from multiple ports or pseudowires. In this scenario, however, the distinguishing issue is EVPN duplicate MAC protection and the confirming observation is: The duplicate source is corrected and MAC ownership stabilizes on one authorized site.

Question 950

During a multisite network cutover, an HPE Juniper Networking engineer investigates this situation: A customer has accidentally assigned the same MAC to hosts in two sites and BGP EVPN repeatedly alternates the remote MAC owner. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Maintain a per-VPN site-ID allocation register.
  2. Alert on oscillating MAC addresses that exceed planned mobility behavior.
  3. Track MAC churn and unknown-unicast levels separately from ordinary broadcast traffic.
  4. Alert on rapid MAC moves and validate redundant CPE topology.

Explanation

Correct Answer

B:

Alert on oscillating MAC addresses that exceed planned mobility behavior. The control limits repetition of the described root condition: Repeated conflicting MAC advertisements can indicate duplicate endpoint identity rather than valid sequential migration. During audits, confirm: The duplicate source is corrected and MAC ownership stabilizes on one authorized site.

Incorrect Answers

A:

Maintain a per-VPN site-ID allocation register. This is a plausible preventive practice for a different Layer 2 VPNs condition, specifically BGP L2VPN site ID collision. BGP L2VPN site identifiers help map distinct site attachments into the signaled service topology. In this scenario, however, the distinguishing issue is EVPN duplicate MAC protection and the confirming observation is: The duplicate source is corrected and MAC ownership stabilizes on one authorized site.

C:

Track MAC churn and unknown-unicast levels separately from ordinary broadcast traffic. This is a plausible preventive practice for a different Layer 2 VPNs condition, specifically VPLS flooding unknown unicast. VPLS provides multipoint Ethernet bridging, so traffic to unknown MAC addresses can be flooded within the VPN forwarding domain. In this scenario, however, the distinguishing issue is EVPN duplicate MAC protection and the confirming observation is: The duplicate source is corrected and MAC ownership stabilizes on one authorized site.

D:

Alert on rapid MAC moves and validate redundant CPE topology. This is a plausible preventive practice for a different Layer 2 VPNs condition, specifically VPLS MAC move instability. Multipoint Layer 2 forwarding can become unstable when the same source MAC appears alternately from multiple ports or pseudowires. In this scenario, however, the distinguishing issue is EVPN duplicate MAC protection and the confirming observation is: The duplicate source is corrected and MAC ownership stabilizes on one authorized site.


Service Provider Routing and Switching, Professional (JNCIP-SP) (JN0-664) Practice Tests

Purchase Individually

JN0-664 Premium File

Premium File
JN0-664 Premium File
96 Q&A
$76.99$69.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.