Pass Your Juniper JN0-664 Exam Easy!

Juniper JN0-664 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

JN0-664 Premium VCE File

Juniper JN0-664 Premium File

96 Questions & Answers

Last Update: Oct 12, 2026

$69.99

JN0-664 Bundle gives you unlimited access to "JN0-664" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
JN0-664 Premium VCE File
Juniper JN0-664 Premium File

96 Questions & Answers

Last Update: Oct 12, 2026

$69.99

Juniper JN0-664 Exam Bundle gives you unlimited access to "JN0-664" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

Juniper JN0-664 Practice Test 6

Question 50

During an inter-POP failover test, an HPE Juniper Networking engineer investigates this situation: A service-provider peering ceased exchanging usable OSPF Hellos immediately after an authentication-key rotation; interface counters show packets arriving. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Audit passive-interface exceptions to prevent unintended neighbor formation.
  2. Stage authentication rollovers on both sides and confirm control-plane acceptance before retiring old keys.
  3. Include interface MTU parity and the neighbor Full state in standard link acceptance tests.
  4. Check router-ID uniqueness before bringing cloned routing instances online.

Explanation

Correct Answer

B:

Stage authentication rollovers on both sides and confirm control-plane acceptance before retiring old keys. The control limits repetition of the described root condition: Incompatible OSPF authentication settings cause received packets to be rejected before neighbor state can progress. During audits, confirm: Authentication counters and logs stop showing rejects and the existing adjacency returns to Full.

Incorrect Answers

A:

Audit passive-interface exceptions to prevent unintended neighbor formation. This is a plausible preventive practice for a different OSPF condition, specifically Passive interface on OSPF LAN. A passive interface can contribute reachability without initiating routing adjacencies on a nontransit segment. In this scenario, however, the distinguishing issue is OSPF authentication key rollover and the confirming observation is: Authentication counters and logs stop showing rejects and the existing adjacency returns to Full.

C:

Include interface MTU parity and the neighbor Full state in standard link acceptance tests. This is a plausible preventive practice for a different OSPF condition, specifically OSPF MTU adjacency ExStart. Inconsistent MTU handling can prevent successful OSPF database description exchange despite matching Hello parameters. In this scenario, however, the distinguishing issue is OSPF authentication key rollover and the confirming observation is: Authentication counters and logs stop showing rejects and the existing adjacency returns to Full.

D:

Check router-ID uniqueness before bringing cloned routing instances online. This is a plausible preventive practice for a different OSPF condition, specifically OSPF duplicate router identifier. Duplicate router IDs undermine unique identification of OSPF LSA originators and can corrupt stable topology interpretation. In this scenario, however, the distinguishing issue is OSPF authentication key rollover and the confirming observation is: Authentication counters and logs stop showing rejects and the existing adjacency returns to Full.

Question 51

During a new PE-router service turn-up, an HPE Juniper Networking engineer investigates this situation: A downstream OSPF router selects an exit ASBR that is farther away from it even though both exits advertise an identical external network. Which targeted check most directly distinguishes the likely cause before a configuration change?

  1. Compare the received Hello and dead intervals on both ends of the same segment.
  2. Inspect both peers' OSPF interface network type and resulting designated-router state.
  3. Inspect external route types and compare the internal cost to each advertising ASBR.
  4. Inspect the ABR's area range configuration and the origin of interarea summary LSAs.

Explanation

Correct Answer

C:

Inspect external route types and compare the internal cost to each advertising ASBR. This check examines the decisive condition for External E1 versus E2 selection before any unrelated changes are made. The underlying mechanism is: An external E2 metric primarily represents the advertised external cost, whereas E1 accounts for internal cost toward the ASBR plus external cost. The confirming observation is: The calculated path ranking changes as predicted when an E1 policy considers internal cost to each exit.

Incorrect Answers

A:

Compare the received Hello and dead intervals on both ends of the same segment. This is a plausible diagnostic check for a different OSPF condition, specifically Hello/dead timer mismatch. Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency. In this scenario, however, the distinguishing issue is External E1 versus E2 selection and the confirming observation is: The calculated path ranking changes as predicted when an E1 policy considers internal cost to each exit.

B:

Inspect both peers' OSPF interface network type and resulting designated-router state. This is a plausible diagnostic check for a different OSPF condition, specifically OSPF point-to-point on Ethernet. A point-to-point OSPF interface avoids broadcast DR/BDR election behavior when both sides use a consistent compatible type. In this scenario, however, the distinguishing issue is External E1 versus E2 selection and the confirming observation is: The calculated path ranking changes as predicted when an E1 policy considers internal cost to each exit.

D:

Inspect the ABR's area range configuration and the origin of interarea summary LSAs. This is a plausible diagnostic check for a different OSPF condition, specifically Route summarization at ABR. Interarea aggregation is performed by a suitable ABR; setting an unrelated import filter does not itself produce the expected summary. In this scenario, however, the distinguishing issue is External E1 versus E2 selection and the confirming observation is: The calculated path ranking changes as predicted when an E1 policy considers internal cost to each exit.

Question 52

During a customer VPN change window, an HPE Juniper Networking engineer investigates this situation: A downstream OSPF router selects an exit ASBR that is farther away from it even though both exits advertise an identical external network. Which routing or service mechanism best explains the reported behavior?

  1. Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency.
  2. A point-to-point OSPF interface avoids broadcast DR/BDR election behavior when both sides use a consistent compatible type.
  3. Interarea aggregation is performed by a suitable ABR; setting an unrelated import filter does not itself produce the expected summary.
  4. An external E2 metric primarily represents the advertised external cost, whereas E1 accounts for internal cost toward the ASBR plus external cost.

Explanation

Correct Answer

D:

An external E2 metric primarily represents the advertised external cost, whereas E1 accounts for internal cost toward the ASBR plus external cost. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: The calculated path ranking changes as predicted when an E1 policy considers internal cost to each exit. The targeted correction is: Use an E1 policy when internal path cost to an external exit must influence the selection.

Incorrect Answers

A:

Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency. This is a plausible protocol explanation for a different OSPF condition, specifically Hello/dead timer mismatch. Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency. In this scenario, however, the distinguishing issue is External E1 versus E2 selection and the confirming observation is: The calculated path ranking changes as predicted when an E1 policy considers internal cost to each exit.

B:

A point-to-point OSPF interface avoids broadcast DR/BDR election behavior when both sides use a consistent compatible type. This is a plausible protocol explanation for a different OSPF condition, specifically OSPF point-to-point on Ethernet. A point-to-point OSPF interface avoids broadcast DR/BDR election behavior when both sides use a consistent compatible type. In this scenario, however, the distinguishing issue is External E1 versus E2 selection and the confirming observation is: The calculated path ranking changes as predicted when an E1 policy considers internal cost to each exit.

C:

Interarea aggregation is performed by a suitable ABR; setting an unrelated import filter does not itself produce the expected summary. This is a plausible protocol explanation for a different OSPF condition, specifically Route summarization at ABR. Interarea aggregation is performed by a suitable ABR; setting an unrelated import filter does not itself produce the expected summary. In this scenario, however, the distinguishing issue is External E1 versus E2 selection and the confirming observation is: The calculated path ranking changes as predicted when an E1 policy considers internal cost to each exit.

Question 53

During a core-routing migration rehearsal, an HPE Juniper Networking engineer investigates this situation: A downstream OSPF router selects an exit ASBR that is farther away from it even though both exits advertise an identical external network. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?

  1. The calculated path ranking changes as predicted when an E1 policy considers internal cost to each exit.
  2. The Hello parameter mismatch is absent and the neighbor remains stable across several dead intervals.
  3. The pair reaches Full without a broadcast-segment DR/BDR election under the point-to-point design.
  4. Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy.

Explanation

Correct Answer

A:

The calculated path ranking changes as predicted when an E1 policy considers internal cost to each exit. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: An external E2 metric primarily represents the advertised external cost, whereas E1 accounts for internal cost toward the ASBR plus external cost.

Incorrect Answers

B:

The Hello parameter mismatch is absent and the neighbor remains stable across several dead intervals. This is a plausible observed evidence for a different OSPF condition, specifically Hello/dead timer mismatch. Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency. In this scenario, however, the distinguishing issue is External E1 versus E2 selection and the confirming observation is: The calculated path ranking changes as predicted when an E1 policy considers internal cost to each exit.

C:

The pair reaches Full without a broadcast-segment DR/BDR election under the point-to-point design. This is a plausible observed evidence for a different OSPF condition, specifically OSPF point-to-point on Ethernet. A point-to-point OSPF interface avoids broadcast DR/BDR election behavior when both sides use a consistent compatible type. In this scenario, however, the distinguishing issue is External E1 versus E2 selection and the confirming observation is: The calculated path ranking changes as predicted when an E1 policy considers internal cost to each exit.

D:

Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy. This is a plausible observed evidence for a different OSPF condition, specifically Route summarization at ABR. Interarea aggregation is performed by a suitable ABR; setting an unrelated import filter does not itself produce the expected summary. In this scenario, however, the distinguishing issue is External E1 versus E2 selection and the confirming observation is: The calculated path ranking changes as predicted when an E1 policy considers internal cost to each exit.

Question 54

During a backbone POP acceptance review, an HPE Juniper Networking engineer investigates this situation: A downstream OSPF router selects an exit ASBR that is farther away from it even though both exits advertise an identical external network. Which response or focused corrective action best addresses this situation without changing unrelated components?

  1. Align Hello and dead timer values on the adjacency while keeping the network's planned convergence budget.
  2. Use an E1 policy when internal path cost to an external exit must influence the selection.
  3. Use point-to-point OSPF interface operation consistently on the dedicated link.
  4. Configure the ABR area range with a prefix that genuinely covers the intended internal networks.

Explanation

Correct Answer

B:

Use an E1 policy when internal path cost to an external exit must influence the selection. The change addresses the root behavior described here: An external E2 metric primarily represents the advertised external cost, whereas E1 accounts for internal cost toward the ASBR plus external cost. Verify success with: The calculated path ranking changes as predicted when an E1 policy considers internal cost to each exit.

Incorrect Answers

A:

Align Hello and dead timer values on the adjacency while keeping the network's planned convergence budget. This is a plausible configuration or operational fix for a different OSPF condition, specifically Hello/dead timer mismatch. Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency. In this scenario, however, the distinguishing issue is External E1 versus E2 selection and the confirming observation is: The calculated path ranking changes as predicted when an E1 policy considers internal cost to each exit.

C:

Use point-to-point OSPF interface operation consistently on the dedicated link. This is a plausible configuration or operational fix for a different OSPF condition, specifically OSPF point-to-point on Ethernet. A point-to-point OSPF interface avoids broadcast DR/BDR election behavior when both sides use a consistent compatible type. In this scenario, however, the distinguishing issue is External E1 versus E2 selection and the confirming observation is: The calculated path ranking changes as predicted when an E1 policy considers internal cost to each exit.

D:

Configure the ABR area range with a prefix that genuinely covers the intended internal networks. This is a plausible configuration or operational fix for a different OSPF condition, specifically Route summarization at ABR. Interarea aggregation is performed by a suitable ABR; setting an unrelated import filter does not itself produce the expected summary. In this scenario, however, the distinguishing issue is External E1 versus E2 selection and the confirming observation is: The calculated path ranking changes as predicted when an E1 policy considers internal cost to each exit.

Question 55

During an overnight NOC investigation, an HPE Juniper Networking engineer investigates this situation: A downstream OSPF router selects an exit ASBR that is farther away from it even though both exits advertise an identical external network. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Audit OSPF interface timers during template deployment and route maintenance.
  2. Document OSPF network types for dedicated versus shared Ethernet circuits.
  3. Test external metric-type assumptions after an ASBR topology or cost change.
  4. Verify summary coverage and black-hole risk whenever component routes change.

Explanation

Correct Answer

C:

Test external metric-type assumptions after an ASBR topology or cost change. The control limits repetition of the described root condition: An external E2 metric primarily represents the advertised external cost, whereas E1 accounts for internal cost toward the ASBR plus external cost. During audits, confirm: The calculated path ranking changes as predicted when an E1 policy considers internal cost to each exit.

Incorrect Answers

A:

Audit OSPF interface timers during template deployment and route maintenance. This is a plausible preventive practice for a different OSPF condition, specifically Hello/dead timer mismatch. Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency. In this scenario, however, the distinguishing issue is External E1 versus E2 selection and the confirming observation is: The calculated path ranking changes as predicted when an E1 policy considers internal cost to each exit.

B:

Document OSPF network types for dedicated versus shared Ethernet circuits. This is a plausible preventive practice for a different OSPF condition, specifically OSPF point-to-point on Ethernet. A point-to-point OSPF interface avoids broadcast DR/BDR election behavior when both sides use a consistent compatible type. In this scenario, however, the distinguishing issue is External E1 versus E2 selection and the confirming observation is: The calculated path ranking changes as predicted when an E1 policy considers internal cost to each exit.

D:

Verify summary coverage and black-hole risk whenever component routes change. This is a plausible preventive practice for a different OSPF condition, specifically Route summarization at ABR. Interarea aggregation is performed by a suitable ABR; setting an unrelated import filter does not itself produce the expected summary. In this scenario, however, the distinguishing issue is External E1 versus E2 selection and the confirming observation is: The calculated path ranking changes as predicted when an E1 policy considers internal cost to each exit.

Question 56

During a high-availability validation, an HPE Juniper Networking engineer investigates this situation: An access area sends hundreds of individual internal prefixes across the ABR even though the operator intended one stable site summary. Which targeted check most directly distinguishes the likely cause before a configuration change?

  1. Compare the area's stub configuration and its LSA types with the missing external destinations.
  2. Compare the received Hello and dead intervals on both ends of the same segment.
  3. Inspect both peers' OSPF interface network type and resulting designated-router state.
  4. Inspect the ABR's area range configuration and the origin of interarea summary LSAs.

Explanation

Correct Answer

D:

Inspect the ABR's area range configuration and the origin of interarea summary LSAs. This check examines the decisive condition for Route summarization at ABR before any unrelated changes are made. The underlying mechanism is: Interarea aggregation is performed by a suitable ABR; setting an unrelated import filter does not itself produce the expected summary. The confirming observation is: Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy.

Incorrect Answers

A:

Compare the area's stub configuration and its LSA types with the missing external destinations. This is a plausible diagnostic check for a different OSPF condition, specifically Stub-area external reachability. A stub area excludes AS-external type 5 LSAs and relies on ABR-supplied reachability rather than importing individual external routes. In this scenario, however, the distinguishing issue is Route summarization at ABR and the confirming observation is: Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy.

B:

Compare the received Hello and dead intervals on both ends of the same segment. This is a plausible diagnostic check for a different OSPF condition, specifically Hello/dead timer mismatch. Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency. In this scenario, however, the distinguishing issue is Route summarization at ABR and the confirming observation is: Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy.

C:

Inspect both peers' OSPF interface network type and resulting designated-router state. This is a plausible diagnostic check for a different OSPF condition, specifically OSPF point-to-point on Ethernet. A point-to-point OSPF interface avoids broadcast DR/BDR election behavior when both sides use a consistent compatible type. In this scenario, however, the distinguishing issue is Route summarization at ABR and the confirming observation is: Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy.

Question 57

During a Junos routing maintenance review, an HPE Juniper Networking engineer investigates this situation: An access area sends hundreds of individual internal prefixes across the ABR even though the operator intended one stable site summary. Which routing or service mechanism best explains the reported behavior?

  1. Interarea aggregation is performed by a suitable ABR; setting an unrelated import filter does not itself produce the expected summary.
  2. A stub area excludes AS-external type 5 LSAs and relies on ABR-supplied reachability rather than importing individual external routes.
  3. Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency.
  4. A point-to-point OSPF interface avoids broadcast DR/BDR election behavior when both sides use a consistent compatible type.

Explanation

Correct Answer

A:

Interarea aggregation is performed by a suitable ABR; setting an unrelated import filter does not itself produce the expected summary. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy. The targeted correction is: Configure the ABR area range with a prefix that genuinely covers the intended internal networks.

Incorrect Answers

B:

A stub area excludes AS-external type 5 LSAs and relies on ABR-supplied reachability rather than importing individual external routes. This is a plausible protocol explanation for a different OSPF condition, specifically Stub-area external reachability. A stub area excludes AS-external type 5 LSAs and relies on ABR-supplied reachability rather than importing individual external routes. In this scenario, however, the distinguishing issue is Route summarization at ABR and the confirming observation is: Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy.

C:

Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency. This is a plausible protocol explanation for a different OSPF condition, specifically Hello/dead timer mismatch. Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency. In this scenario, however, the distinguishing issue is Route summarization at ABR and the confirming observation is: Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy.

D:

A point-to-point OSPF interface avoids broadcast DR/BDR election behavior when both sides use a consistent compatible type. This is a plausible protocol explanation for a different OSPF condition, specifically OSPF point-to-point on Ethernet. A point-to-point OSPF interface avoids broadcast DR/BDR election behavior when both sides use a consistent compatible type. In this scenario, however, the distinguishing issue is Route summarization at ABR and the confirming observation is: Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy.

Question 58

During a multisite network cutover, an HPE Juniper Networking engineer investigates this situation: An access area sends hundreds of individual internal prefixes across the ABR even though the operator intended one stable site summary. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?

  1. The local LSDB lacks type 5 LSAs while an ABR-provided default can still be installed.
  2. Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy.
  3. The Hello parameter mismatch is absent and the neighbor remains stable across several dead intervals.
  4. The pair reaches Full without a broadcast-segment DR/BDR election under the point-to-point design.

Explanation

Correct Answer

B:

Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: Interarea aggregation is performed by a suitable ABR; setting an unrelated import filter does not itself produce the expected summary.

Incorrect Answers

A:

The local LSDB lacks type 5 LSAs while an ABR-provided default can still be installed. This is a plausible observed evidence for a different OSPF condition, specifically Stub-area external reachability. A stub area excludes AS-external type 5 LSAs and relies on ABR-supplied reachability rather than importing individual external routes. In this scenario, however, the distinguishing issue is Route summarization at ABR and the confirming observation is: Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy.

C:

The Hello parameter mismatch is absent and the neighbor remains stable across several dead intervals. This is a plausible observed evidence for a different OSPF condition, specifically Hello/dead timer mismatch. Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency. In this scenario, however, the distinguishing issue is Route summarization at ABR and the confirming observation is: Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy.

D:

The pair reaches Full without a broadcast-segment DR/BDR election under the point-to-point design. This is a plausible observed evidence for a different OSPF condition, specifically OSPF point-to-point on Ethernet. A point-to-point OSPF interface avoids broadcast DR/BDR election behavior when both sides use a consistent compatible type. In this scenario, however, the distinguishing issue is Route summarization at ABR and the confirming observation is: Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy.

Question 59

During a metro aggregation incident, an HPE Juniper Networking engineer investigates this situation: An access area sends hundreds of individual internal prefixes across the ABR even though the operator intended one stable site summary. Which response or focused corrective action best addresses this situation without changing unrelated components?

  1. Use a normal area if individual external LSAs are required, or explicitly design default-route reachability through the ABR.
  2. Align Hello and dead timer values on the adjacency while keeping the network's planned convergence budget.
  3. Configure the ABR area range with a prefix that genuinely covers the intended internal networks.
  4. Use point-to-point OSPF interface operation consistently on the dedicated link.

Explanation

Correct Answer

C:

Configure the ABR area range with a prefix that genuinely covers the intended internal networks. The change addresses the root behavior described here: Interarea aggregation is performed by a suitable ABR; setting an unrelated import filter does not itself produce the expected summary. Verify success with: Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy.

Incorrect Answers

A:

Use a normal area if individual external LSAs are required, or explicitly design default-route reachability through the ABR. This is a plausible configuration or operational fix for a different OSPF condition, specifically Stub-area external reachability. A stub area excludes AS-external type 5 LSAs and relies on ABR-supplied reachability rather than importing individual external routes. In this scenario, however, the distinguishing issue is Route summarization at ABR and the confirming observation is: Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy.

B:

Align Hello and dead timer values on the adjacency while keeping the network's planned convergence budget. This is a plausible configuration or operational fix for a different OSPF condition, specifically Hello/dead timer mismatch. Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency. In this scenario, however, the distinguishing issue is Route summarization at ABR and the confirming observation is: Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy.

D:

Use point-to-point OSPF interface operation consistently on the dedicated link. This is a plausible configuration or operational fix for a different OSPF condition, specifically OSPF point-to-point on Ethernet. A point-to-point OSPF interface avoids broadcast DR/BDR election behavior when both sides use a consistent compatible type. In this scenario, however, the distinguishing issue is Route summarization at ABR and the confirming observation is: Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy.

Question 60

During a managed service audit, an HPE Juniper Networking engineer investigates this situation: An access area sends hundreds of individual internal prefixes across the ABR even though the operator intended one stable site summary. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Record permitted LSA types and verify the default route before converting an area to stub.
  2. Audit OSPF interface timers during template deployment and route maintenance.
  3. Test both the NSSA LSDB and remote external route installation after a redistribution change.
  4. Verify summary coverage and black-hole risk whenever component routes change.

Explanation

Correct Answer

D:

Verify summary coverage and black-hole risk whenever component routes change. The control limits repetition of the described root condition: Interarea aggregation is performed by a suitable ABR; setting an unrelated import filter does not itself produce the expected summary. During audits, confirm: Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy.

Incorrect Answers

A:

Record permitted LSA types and verify the default route before converting an area to stub. This is a plausible preventive practice for a different OSPF condition, specifically Stub-area external reachability. A stub area excludes AS-external type 5 LSAs and relies on ABR-supplied reachability rather than importing individual external routes. In this scenario, however, the distinguishing issue is Route summarization at ABR and the confirming observation is: Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy.

B:

Audit OSPF interface timers during template deployment and route maintenance. This is a plausible preventive practice for a different OSPF condition, specifically Hello/dead timer mismatch. Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency. In this scenario, however, the distinguishing issue is Route summarization at ABR and the confirming observation is: Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy.

C:

Test both the NSSA LSDB and remote external route installation after a redistribution change. This is a plausible preventive practice for a different OSPF condition, specifically NSSA external redistribution. An NSSA can carry locally redistributed externals as type 7 LSAs, which an eligible ABR translates to type 5 outside the NSSA. In this scenario, however, the distinguishing issue is Route summarization at ABR and the confirming observation is: Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy.


Service Provider Routing and Switching, Professional (JNCIP-SP) (JN0-664) Practice Tests

Purchase Individually

JN0-664 Premium File

Premium File
JN0-664 Premium File
96 Q&A
$76.99$69.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.