Pass Your Juniper JN0-664 Exam Easy!

Juniper JN0-664 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

JN0-664 Premium VCE File

Juniper JN0-664 Premium File

96 Questions & Answers

Last Update: Oct 12, 2026

$69.99

JN0-664 Bundle gives you unlimited access to "JN0-664" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
JN0-664 Premium VCE File
Juniper JN0-664 Premium File

96 Questions & Answers

Last Update: Oct 12, 2026

$69.99

Juniper JN0-664 Exam Bundle gives you unlimited access to "JN0-664" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

Juniper JN0-664 Practice Test 5

Question 40

During a service-provider escalation, an HPE Juniper Networking engineer investigates this situation: An OSPF router on a peering VLAN shows a neighbor repeatedly disappearing even though both interfaces have stable link state and IP connectivity. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Test external metric-type assumptions after an ASBR topology or cost change.
  2. Verify summary coverage and black-hole risk whenever component routes change.
  3. Include interface MTU parity and the neighbor Full state in standard link acceptance tests.
  4. Audit OSPF interface timers during template deployment and route maintenance.

Explanation

Correct Answer

D:

Audit OSPF interface timers during template deployment and route maintenance. The control limits repetition of the described root condition: Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency. During audits, confirm: The Hello parameter mismatch is absent and the neighbor remains stable across several dead intervals.

Incorrect Answers

A:

Test external metric-type assumptions after an ASBR topology or cost change. This is a plausible preventive practice for a different OSPF condition, specifically External E1 versus E2 selection. An external E2 metric primarily represents the advertised external cost, whereas E1 accounts for internal cost toward the ASBR plus external cost. In this scenario, however, the distinguishing issue is Hello/dead timer mismatch and the confirming observation is: The Hello parameter mismatch is absent and the neighbor remains stable across several dead intervals.

B:

Verify summary coverage and black-hole risk whenever component routes change. This is a plausible preventive practice for a different OSPF condition, specifically Route summarization at ABR. Interarea aggregation is performed by a suitable ABR; setting an unrelated import filter does not itself produce the expected summary. In this scenario, however, the distinguishing issue is Hello/dead timer mismatch and the confirming observation is: The Hello parameter mismatch is absent and the neighbor remains stable across several dead intervals.

C:

Include interface MTU parity and the neighbor Full state in standard link acceptance tests. This is a plausible preventive practice for a different OSPF condition, specifically OSPF MTU adjacency ExStart. Inconsistent MTU handling can prevent successful OSPF database description exchange despite matching Hello parameters. In this scenario, however, the distinguishing issue is Hello/dead timer mismatch and the confirming observation is: The Hello parameter mismatch is absent and the neighbor remains stable across several dead intervals.

Question 41

During a core-routing migration rehearsal, an HPE Juniper Networking engineer investigates this situation: Two directly connected OSPF speakers can ping each other's interface IPs but do not establish an adjacency after a configuration migration. Which targeted check most directly distinguishes the likely cause before a configuration change?

  1. Compare the interface area ID on both neighbors and inspect received OSPF Hello fields.
  2. Inspect OSPFv3 participation and IPv6 link-local neighbor formation instead of assuming OSPFv2 carries IPv6.
  3. Compare authentication type, key identifier and accepted keys during the rollover window.
  4. Inspect the ABR's area range configuration and the origin of interarea summary LSAs.

Explanation

Correct Answer

A:

Compare the interface area ID on both neighbors and inspect received OSPF Hello fields. This check examines the decisive condition for Area ID mismatch before any unrelated changes are made. The underlying mechanism is: An OSPF adjacency requires consistent area identity on the shared link. The confirming observation is: The pair reports the same area ID and progresses through the normal neighbor state sequence to Full.

Incorrect Answers

B:

Inspect OSPFv3 participation and IPv6 link-local neighbor formation instead of assuming OSPFv2 carries IPv6. This is a plausible diagnostic check for a different OSPF condition, specifically OSPFv3 address-family enablement. OSPFv2 and OSPFv3 have different address-family and protocol mechanics, so an OSPFv2 neighbor alone proves nothing about IPv6 routing. In this scenario, however, the distinguishing issue is Area ID mismatch and the confirming observation is: The pair reports the same area ID and progresses through the normal neighbor state sequence to Full.

C:

Compare authentication type, key identifier and accepted keys during the rollover window. This is a plausible diagnostic check for a different OSPF condition, specifically OSPF authentication key rollover. Incompatible OSPF authentication settings cause received packets to be rejected before neighbor state can progress. In this scenario, however, the distinguishing issue is Area ID mismatch and the confirming observation is: The pair reports the same area ID and progresses through the normal neighbor state sequence to Full.

D:

Inspect the ABR's area range configuration and the origin of interarea summary LSAs. This is a plausible diagnostic check for a different OSPF condition, specifically Route summarization at ABR. Interarea aggregation is performed by a suitable ABR; setting an unrelated import filter does not itself produce the expected summary. In this scenario, however, the distinguishing issue is Area ID mismatch and the confirming observation is: The pair reports the same area ID and progresses through the normal neighbor state sequence to Full.

Question 42

During a backbone POP acceptance review, an HPE Juniper Networking engineer investigates this situation: Two directly connected OSPF speakers can ping each other's interface IPs but do not establish an adjacency after a configuration migration. Which routing or service mechanism best explains the reported behavior?

  1. OSPFv2 and OSPFv3 have different address-family and protocol mechanics, so an OSPFv2 neighbor alone proves nothing about IPv6 routing.
  2. An OSPF adjacency requires consistent area identity on the shared link.
  3. Incompatible OSPF authentication settings cause received packets to be rejected before neighbor state can progress.
  4. Interarea aggregation is performed by a suitable ABR; setting an unrelated import filter does not itself produce the expected summary.

Explanation

Correct Answer

B:

An OSPF adjacency requires consistent area identity on the shared link. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: The pair reports the same area ID and progresses through the normal neighbor state sequence to Full. The targeted correction is: Assign both link interfaces to the intended common area without moving unrelated interfaces.

Incorrect Answers

A:

OSPFv2 and OSPFv3 have different address-family and protocol mechanics, so an OSPFv2 neighbor alone proves nothing about IPv6 routing. This is a plausible protocol explanation for a different OSPF condition, specifically OSPFv3 address-family enablement. OSPFv2 and OSPFv3 have different address-family and protocol mechanics, so an OSPFv2 neighbor alone proves nothing about IPv6 routing. In this scenario, however, the distinguishing issue is Area ID mismatch and the confirming observation is: The pair reports the same area ID and progresses through the normal neighbor state sequence to Full.

C:

Incompatible OSPF authentication settings cause received packets to be rejected before neighbor state can progress. This is a plausible protocol explanation for a different OSPF condition, specifically OSPF authentication key rollover. Incompatible OSPF authentication settings cause received packets to be rejected before neighbor state can progress. In this scenario, however, the distinguishing issue is Area ID mismatch and the confirming observation is: The pair reports the same area ID and progresses through the normal neighbor state sequence to Full.

D:

Interarea aggregation is performed by a suitable ABR; setting an unrelated import filter does not itself produce the expected summary. This is a plausible protocol explanation for a different OSPF condition, specifically Route summarization at ABR. Interarea aggregation is performed by a suitable ABR; setting an unrelated import filter does not itself produce the expected summary. In this scenario, however, the distinguishing issue is Area ID mismatch and the confirming observation is: The pair reports the same area ID and progresses through the normal neighbor state sequence to Full.

Question 43

During an overnight NOC investigation, an HPE Juniper Networking engineer investigates this situation: Two directly connected OSPF speakers can ping each other's interface IPs but do not establish an adjacency after a configuration migration. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?

  1. An OSPFv3 neighbor and expected IPv6 routes are visible in the appropriate routing table.
  2. Authentication counters and logs stop showing rejects and the existing adjacency returns to Full.
  3. The pair reports the same area ID and progresses through the normal neighbor state sequence to Full.
  4. Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy.

Explanation

Correct Answer

C:

The pair reports the same area ID and progresses through the normal neighbor state sequence to Full. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: An OSPF adjacency requires consistent area identity on the shared link.

Incorrect Answers

A:

An OSPFv3 neighbor and expected IPv6 routes are visible in the appropriate routing table. This is a plausible observed evidence for a different OSPF condition, specifically OSPFv3 address-family enablement. OSPFv2 and OSPFv3 have different address-family and protocol mechanics, so an OSPFv2 neighbor alone proves nothing about IPv6 routing. In this scenario, however, the distinguishing issue is Area ID mismatch and the confirming observation is: The pair reports the same area ID and progresses through the normal neighbor state sequence to Full.

B:

Authentication counters and logs stop showing rejects and the existing adjacency returns to Full. This is a plausible observed evidence for a different OSPF condition, specifically OSPF authentication key rollover. Incompatible OSPF authentication settings cause received packets to be rejected before neighbor state can progress. In this scenario, however, the distinguishing issue is Area ID mismatch and the confirming observation is: The pair reports the same area ID and progresses through the normal neighbor state sequence to Full.

D:

Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy. This is a plausible observed evidence for a different OSPF condition, specifically Route summarization at ABR. Interarea aggregation is performed by a suitable ABR; setting an unrelated import filter does not itself produce the expected summary. In this scenario, however, the distinguishing issue is Area ID mismatch and the confirming observation is: The pair reports the same area ID and progresses through the normal neighbor state sequence to Full.

Question 44

During a customer service restoration, an HPE Juniper Networking engineer investigates this situation: Two directly connected OSPF speakers can ping each other's interface IPs but do not establish an adjacency after a configuration migration. Which response or focused corrective action best addresses this situation without changing unrelated components?

  1. Configure and verify the intended OSPFv3 IPv6 operation on both peers.
  2. Coordinate compatible key-chain or key settings across both peers with an overlap period where supported.
  3. Configure the ABR area range with a prefix that genuinely covers the intended internal networks.
  4. Assign both link interfaces to the intended common area without moving unrelated interfaces.

Explanation

Correct Answer

D:

Assign both link interfaces to the intended common area without moving unrelated interfaces. The change addresses the root behavior described here: An OSPF adjacency requires consistent area identity on the shared link. Verify success with: The pair reports the same area ID and progresses through the normal neighbor state sequence to Full.

Incorrect Answers

A:

Configure and verify the intended OSPFv3 IPv6 operation on both peers. This is a plausible configuration or operational fix for a different OSPF condition, specifically OSPFv3 address-family enablement. OSPFv2 and OSPFv3 have different address-family and protocol mechanics, so an OSPFv2 neighbor alone proves nothing about IPv6 routing. In this scenario, however, the distinguishing issue is Area ID mismatch and the confirming observation is: The pair reports the same area ID and progresses through the normal neighbor state sequence to Full.

B:

Coordinate compatible key-chain or key settings across both peers with an overlap period where supported. This is a plausible configuration or operational fix for a different OSPF condition, specifically OSPF authentication key rollover. Incompatible OSPF authentication settings cause received packets to be rejected before neighbor state can progress. In this scenario, however, the distinguishing issue is Area ID mismatch and the confirming observation is: The pair reports the same area ID and progresses through the normal neighbor state sequence to Full.

C:

Configure the ABR area range with a prefix that genuinely covers the intended internal networks. This is a plausible configuration or operational fix for a different OSPF condition, specifically Route summarization at ABR. Interarea aggregation is performed by a suitable ABR; setting an unrelated import filter does not itself produce the expected summary. In this scenario, however, the distinguishing issue is Area ID mismatch and the confirming observation is: The pair reports the same area ID and progresses through the normal neighbor state sequence to Full.

Question 45

During an edge-to-core validation, an HPE Juniper Networking engineer investigates this situation: Two directly connected OSPF speakers can ping each other's interface IPs but do not establish an adjacency after a configuration migration. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Validate area IDs for both link endpoints in change prechecks.
  2. Track IPv4 and IPv6 adjacencies and RIB entries as separate acceptance checks.
  3. Include interface MTU parity and the neighbor Full state in standard link acceptance tests.
  4. Stage authentication rollovers on both sides and confirm control-plane acceptance before retiring old keys.

Explanation

Correct Answer

A:

Validate area IDs for both link endpoints in change prechecks. The control limits repetition of the described root condition: An OSPF adjacency requires consistent area identity on the shared link. During audits, confirm: The pair reports the same area ID and progresses through the normal neighbor state sequence to Full.

Incorrect Answers

B:

Track IPv4 and IPv6 adjacencies and RIB entries as separate acceptance checks. This is a plausible preventive practice for a different OSPF condition, specifically OSPFv3 address-family enablement. OSPFv2 and OSPFv3 have different address-family and protocol mechanics, so an OSPFv2 neighbor alone proves nothing about IPv6 routing. In this scenario, however, the distinguishing issue is Area ID mismatch and the confirming observation is: The pair reports the same area ID and progresses through the normal neighbor state sequence to Full.

C:

Include interface MTU parity and the neighbor Full state in standard link acceptance tests. This is a plausible preventive practice for a different OSPF condition, specifically OSPF MTU adjacency ExStart. Inconsistent MTU handling can prevent successful OSPF database description exchange despite matching Hello parameters. In this scenario, however, the distinguishing issue is Area ID mismatch and the confirming observation is: The pair reports the same area ID and progresses through the normal neighbor state sequence to Full.

D:

Stage authentication rollovers on both sides and confirm control-plane acceptance before retiring old keys. This is a plausible preventive practice for a different OSPF condition, specifically OSPF authentication key rollover. Incompatible OSPF authentication settings cause received packets to be rejected before neighbor state can progress. In this scenario, however, the distinguishing issue is Area ID mismatch and the confirming observation is: The pair reports the same area ID and progresses through the normal neighbor state sequence to Full.

Question 46

During a multisite network cutover, an HPE Juniper Networking engineer investigates this situation: A service-provider peering ceased exchanging usable OSPF Hellos immediately after an authentication-key rotation; interface counters show packets arriving. Which targeted check most directly distinguishes the likely cause before a configuration change?

  1. Inspect whether the loopback or host-facing interface is passive while its prefix remains in OSPF.
  2. Compare authentication type, key identifier and accepted keys during the rollover window.
  3. Compare the received Hello and dead intervals on both ends of the same segment.
  4. Compare the interface area ID on both neighbors and inspect received OSPF Hello fields.

Explanation

Correct Answer

B:

Compare authentication type, key identifier and accepted keys during the rollover window. This check examines the decisive condition for OSPF authentication key rollover before any unrelated changes are made. The underlying mechanism is: Incompatible OSPF authentication settings cause received packets to be rejected before neighbor state can progress. The confirming observation is: Authentication counters and logs stop showing rejects and the existing adjacency returns to Full.

Incorrect Answers

A:

Inspect whether the loopback or host-facing interface is passive while its prefix remains in OSPF. This is a plausible diagnostic check for a different OSPF condition, specifically Passive interface on OSPF LAN. A passive interface can contribute reachability without initiating routing adjacencies on a nontransit segment. In this scenario, however, the distinguishing issue is OSPF authentication key rollover and the confirming observation is: Authentication counters and logs stop showing rejects and the existing adjacency returns to Full.

C:

Compare the received Hello and dead intervals on both ends of the same segment. This is a plausible diagnostic check for a different OSPF condition, specifically Hello/dead timer mismatch. Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency. In this scenario, however, the distinguishing issue is OSPF authentication key rollover and the confirming observation is: Authentication counters and logs stop showing rejects and the existing adjacency returns to Full.

D:

Compare the interface area ID on both neighbors and inspect received OSPF Hello fields. This is a plausible diagnostic check for a different OSPF condition, specifically Area ID mismatch. An OSPF adjacency requires consistent area identity on the shared link. In this scenario, however, the distinguishing issue is OSPF authentication key rollover and the confirming observation is: Authentication counters and logs stop showing rejects and the existing adjacency returns to Full.

Question 47

During a metro aggregation incident, an HPE Juniper Networking engineer investigates this situation: A service-provider peering ceased exchanging usable OSPF Hellos immediately after an authentication-key rotation; interface counters show packets arriving. Which routing or service mechanism best explains the reported behavior?

  1. A passive interface can contribute reachability without initiating routing adjacencies on a nontransit segment.
  2. Duplicate router IDs undermine unique identification of OSPF LSA originators and can corrupt stable topology interpretation.
  3. Incompatible OSPF authentication settings cause received packets to be rejected before neighbor state can progress.
  4. Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency.

Explanation

Correct Answer

C:

Incompatible OSPF authentication settings cause received packets to be rejected before neighbor state can progress. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: Authentication counters and logs stop showing rejects and the existing adjacency returns to Full. The targeted correction is: Coordinate compatible key-chain or key settings across both peers with an overlap period where supported.

Incorrect Answers

A:

A passive interface can contribute reachability without initiating routing adjacencies on a nontransit segment. This is a plausible protocol explanation for a different OSPF condition, specifically Passive interface on OSPF LAN. A passive interface can contribute reachability without initiating routing adjacencies on a nontransit segment. In this scenario, however, the distinguishing issue is OSPF authentication key rollover and the confirming observation is: Authentication counters and logs stop showing rejects and the existing adjacency returns to Full.

B:

Duplicate router IDs undermine unique identification of OSPF LSA originators and can corrupt stable topology interpretation. This is a plausible protocol explanation for a different OSPF condition, specifically OSPF duplicate router identifier. Duplicate router IDs undermine unique identification of OSPF LSA originators and can corrupt stable topology interpretation. In this scenario, however, the distinguishing issue is OSPF authentication key rollover and the confirming observation is: Authentication counters and logs stop showing rejects and the existing adjacency returns to Full.

D:

Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency. This is a plausible protocol explanation for a different OSPF condition, specifically Hello/dead timer mismatch. Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency. In this scenario, however, the distinguishing issue is OSPF authentication key rollover and the confirming observation is: Authentication counters and logs stop showing rejects and the existing adjacency returns to Full.

Question 48

During a managed service audit, an HPE Juniper Networking engineer investigates this situation: A service-provider peering ceased exchanging usable OSPF Hellos immediately after an authentication-key rotation; interface counters show packets arriving. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?

  1. The prefix is advertised while no OSPF Hello exchange or neighbor appears on the host-facing interface.
  2. Neighbor detail moves from ExStart to Full after MTU alignment without suppressing required checks.
  3. Each router originates LSAs under a distinct ID and the LSDB converges without conflicting self-originated data.
  4. Authentication counters and logs stop showing rejects and the existing adjacency returns to Full.

Explanation

Correct Answer

D:

Authentication counters and logs stop showing rejects and the existing adjacency returns to Full. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: Incompatible OSPF authentication settings cause received packets to be rejected before neighbor state can progress.

Incorrect Answers

A:

The prefix is advertised while no OSPF Hello exchange or neighbor appears on the host-facing interface. This is a plausible observed evidence for a different OSPF condition, specifically Passive interface on OSPF LAN. A passive interface can contribute reachability without initiating routing adjacencies on a nontransit segment. In this scenario, however, the distinguishing issue is OSPF authentication key rollover and the confirming observation is: Authentication counters and logs stop showing rejects and the existing adjacency returns to Full.

B:

Neighbor detail moves from ExStart to Full after MTU alignment without suppressing required checks. This is a plausible observed evidence for a different OSPF condition, specifically OSPF MTU adjacency ExStart. Inconsistent MTU handling can prevent successful OSPF database description exchange despite matching Hello parameters. In this scenario, however, the distinguishing issue is OSPF authentication key rollover and the confirming observation is: Authentication counters and logs stop showing rejects and the existing adjacency returns to Full.

C:

Each router originates LSAs under a distinct ID and the LSDB converges without conflicting self-originated data. This is a plausible observed evidence for a different OSPF condition, specifically OSPF duplicate router identifier. Duplicate router IDs undermine unique identification of OSPF LSA originators and can corrupt stable topology interpretation. In this scenario, however, the distinguishing issue is OSPF authentication key rollover and the confirming observation is: Authentication counters and logs stop showing rejects and the existing adjacency returns to Full.

Question 49

During a network architecture troubleshooting workshop, an HPE Juniper Networking engineer investigates this situation: A service-provider peering ceased exchanging usable OSPF Hellos immediately after an authentication-key rotation; interface counters show packets arriving. Which response or focused corrective action best addresses this situation without changing unrelated components?

  1. Coordinate compatible key-chain or key settings across both peers with an overlap period where supported.
  2. Make the host-facing advertisement passive and preserve active routing on real transit links.
  3. Correct MTU consistency across the adjacency and retain valid OSPF database synchronization.
  4. Assign unique router IDs and restart or reset the affected protocol process in a controlled change.

Explanation

Correct Answer

A:

Coordinate compatible key-chain or key settings across both peers with an overlap period where supported. The change addresses the root behavior described here: Incompatible OSPF authentication settings cause received packets to be rejected before neighbor state can progress. Verify success with: Authentication counters and logs stop showing rejects and the existing adjacency returns to Full.

Incorrect Answers

B:

Make the host-facing advertisement passive and preserve active routing on real transit links. This is a plausible configuration or operational fix for a different OSPF condition, specifically Passive interface on OSPF LAN. A passive interface can contribute reachability without initiating routing adjacencies on a nontransit segment. In this scenario, however, the distinguishing issue is OSPF authentication key rollover and the confirming observation is: Authentication counters and logs stop showing rejects and the existing adjacency returns to Full.

C:

Correct MTU consistency across the adjacency and retain valid OSPF database synchronization. This is a plausible configuration or operational fix for a different OSPF condition, specifically OSPF MTU adjacency ExStart. Inconsistent MTU handling can prevent successful OSPF database description exchange despite matching Hello parameters. In this scenario, however, the distinguishing issue is OSPF authentication key rollover and the confirming observation is: Authentication counters and logs stop showing rejects and the existing adjacency returns to Full.

D:

Assign unique router IDs and restart or reset the affected protocol process in a controlled change. This is a plausible configuration or operational fix for a different OSPF condition, specifically OSPF duplicate router identifier. Duplicate router IDs undermine unique identification of OSPF LSA originators and can corrupt stable topology interpretation. In this scenario, however, the distinguishing issue is OSPF authentication key rollover and the confirming observation is: Authentication counters and logs stop showing rejects and the existing adjacency returns to Full.

Question 50

During an inter-POP failover test, an HPE Juniper Networking engineer investigates this situation: A service-provider peering ceased exchanging usable OSPF Hellos immediately after an authentication-key rotation; interface counters show packets arriving. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Audit passive-interface exceptions to prevent unintended neighbor formation.
  2. Stage authentication rollovers on both sides and confirm control-plane acceptance before retiring old keys.
  3. Include interface MTU parity and the neighbor Full state in standard link acceptance tests.
  4. Check router-ID uniqueness before bringing cloned routing instances online.

Explanation

Correct Answer

B:

Stage authentication rollovers on both sides and confirm control-plane acceptance before retiring old keys. The control limits repetition of the described root condition: Incompatible OSPF authentication settings cause received packets to be rejected before neighbor state can progress. During audits, confirm: Authentication counters and logs stop showing rejects and the existing adjacency returns to Full.

Incorrect Answers

A:

Audit passive-interface exceptions to prevent unintended neighbor formation. This is a plausible preventive practice for a different OSPF condition, specifically Passive interface on OSPF LAN. A passive interface can contribute reachability without initiating routing adjacencies on a nontransit segment. In this scenario, however, the distinguishing issue is OSPF authentication key rollover and the confirming observation is: Authentication counters and logs stop showing rejects and the existing adjacency returns to Full.

C:

Include interface MTU parity and the neighbor Full state in standard link acceptance tests. This is a plausible preventive practice for a different OSPF condition, specifically OSPF MTU adjacency ExStart. Inconsistent MTU handling can prevent successful OSPF database description exchange despite matching Hello parameters. In this scenario, however, the distinguishing issue is OSPF authentication key rollover and the confirming observation is: Authentication counters and logs stop showing rejects and the existing adjacency returns to Full.

D:

Check router-ID uniqueness before bringing cloned routing instances online. This is a plausible preventive practice for a different OSPF condition, specifically OSPF duplicate router identifier. Duplicate router IDs undermine unique identification of OSPF LSA originators and can corrupt stable topology interpretation. In this scenario, however, the distinguishing issue is OSPF authentication key rollover and the confirming observation is: Authentication counters and logs stop showing rejects and the existing adjacency returns to Full.


Service Provider Routing and Switching, Professional (JNCIP-SP) (JN0-664) Practice Tests

Purchase Individually

JN0-664 Premium File

Premium File
JN0-664 Premium File
96 Q&A
$76.99$69.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.