Pass Your CompTIA N10-009 Exam Easy!

CompTIA N10-009 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

N10-009 Premium Bundle

$79.99

CompTIA N10-009 Premium Bundle

N10-009 Premium File: 768 Questions & Answers

Last Update: Nov 14, 2026

N10-009 Training Course: 240 Video Lectures

N10-009 PDF Study Guide: 128 Pages

N10-009 Bundle gives you unlimited access to "N10-009" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
CompTIA N10-009 Premium Bundle
CompTIA N10-009 Premium Bundle

N10-009 Premium File: 768 Questions & Answers

Last Update: Nov 14, 2026

N10-009 Training Course: 240 Video Lectures

N10-009 PDF Study Guide: 128 Pages

$79.99

N10-009 Bundle gives you unlimited access to "N10-009" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

CompTIA N10-009 Practice Test 75

Question 740

A network team addresses this situation: A legacy Ethernet link has high collisions and poor throughput after one side was forced full duplex and the other half. After the corrective action, which test or result BEST verifies that the problem is resolved?

  1. Measure loaded versus unloaded latency after queue tuning.
  2. Compare channel utilization and airtime wait after retuning.
  3. Correlate spectrum spikes with retry rates before and after mitigation.
  4. Inspect interface duplex and collision counters during test traffic.

Explanation

Correct Answer

D:

An HTTP 404 after a successful TCP connection indicates an application resource or path mismatch. Verification of this result involves inspecting interface duplex and collision counters during test traffic.

Incorrect Answers

A:

Lower loaded RTT validates active queue management. That check cannot demonstrate the current HTTP endpoint and expected application response.

B:

Compare channel utilization and airtime wait after retuning. That check cannot demonstrate the current HTTP endpoint and expected application response.

C:

Correlate spectrum spikes with retry rates before and after mitigation. That check cannot demonstrate the current HTTP endpoint and expected application response.

Question 741

A network specialist investigates this evidence: A legacy Ethernet link has high collisions and poor throughput after one side was forced full duplex and the other half. Which underlying condition BEST explains the observed failure or requirement?

  1. Both link ends disagree on duplex operation.
  2. Too many devices contend for the same radio channel.
  3. Excessive buffering builds long queues on the saturated uplink.
  4. An intermittent 2.4GHz interferer disrupts radio reception.

Explanation

Correct Answer

A:

Both link ends disagree on duplex operation. Mismatched duplex creates frame errors and collision symptoms.

Incorrect Answers

B:

Too many devices contend for the same radio channel. That does not establish both link ends disagree on duplex operation.

C:

Mismatched duplex creates frame errors and collision symptoms. That does not establish both link ends disagree on duplex operation.

D:

An intermittent 2.4GHz interferer disrupts radio reception. That does not establish both link ends disagree on duplex operation.

Question 742

A network team observes: A long-distance fiber link drops bursts of packets and receiver optical power sits below module minimum. What is the MOST appropriate corrective action or technical decision?

  1. Apply suitable queue management and bandwidth shaping at the egress bottleneck.
  2. Repair fiber loss or select compatible reach optics with adequate margin.
  3. Prioritize latency-sensitive flows and manage capacity or scheduled bulk transfers.
  4. Reposition APs or add surveyed coverage with suitable antenna placement.

Explanation

Correct Answer

B:

Poor optical signal causes bit errors and frame loss. The optical receive signal is below supported sensitivity.

Incorrect Answers

A:

Applying suitable queue management and bandwidth shaping at the egress bottleneck would not repair fiber loss or select compatible reach optics with adequate margin.

C:

Prioritizing latency-sensitive flows and managing capacity or scheduled bulk transfers would not repair fiber loss or select compatible reach optics with adequate margin.

D:

Reposition APs or add surveyed coverage with suitable antenna placement would not repair fiber loss or select compatible reach optics with adequate margin.

Question 743

A network team addresses this situation: A long-distance fiber link drops bursts of packets and receiver optical power sits below module minimum. After the corrective action, which test or result BEST verifies that the problem is resolved?

  1. Monitor queue drops and interactive latency during the next peak.
  2. Measure loaded versus unloaded latency after queue tuning.
  3. Measure optical levels and packet error rate after correction.
  4. Compare RTT on the satellite and a terrestrial backup link.

Explanation

Correct Answer

C:

Optical transceiver compatibility and receive-light measurements diagnose the physical signal path before higher-layer work. Verification of this result involves measuring optical levels and packet error rate after correction.

Incorrect Answers

A:

An HTTP 404 after a successful TCP connection indicates an application resource or path mismatch. That check cannot demonstrate restoration and verification of received optical light.

B:

Lower loaded RTT validates active queue management. That check cannot demonstrate restoration and verification of received optical light.

D:

Compare RTT on the satellite and a terrestrial backup link. That check cannot demonstrate restoration and verification of received optical light.

Question 744

A network specialist investigates this evidence: A long-distance fiber link drops bursts of packets and receiver optical power sits below module minimum. Which underlying condition BEST explains the observed failure or requirement?

  1. The traffic rate exceeds available queue and link capacity.
  2. Excessive buffering builds long queues on the saturated uplink.
  3. Propagation delay is inherently high on that path.
  4. The optical receive signal is below supported sensitivity.

Explanation

Correct Answer

D:

The optical receive signal is below supported sensitivity. Poor optical signal causes bit errors and frame loss.

Incorrect Answers

A:

The traffic rate exceeds available queue and link capacity. That does not establish restoration and verification of received optical light.

B:

Poor optical signal causes bit errors and frame loss. That does not establish restoration and verification of received optical light.

C:

Propagation delay is inherently high on that path. That does not establish restoration and verification of received optical light.

Question 745

A network team observes: An application runs between 10GbE hosts but traverses a 1Gbps WAN router and never exceeds 900Mbps. What is the MOST appropriate corrective action or technical decision?

  1. Upgrade or rebalance the constrained link after validating demand.
  2. Survey spectrum and change channel or move affected clients to suitable 5GHz.
  3. Replan AP channels and steer capable clients to less-contended bands.
  4. Use PMTUD support or correct tunnel MSS clamping for the available MTU.

Explanation

Correct Answer

A:

End-to-end throughput cannot exceed a bottleneck's usable capacity. The slowest shared link limits end-to-end throughput.

Incorrect Answers

B:

Survey spectrum and change channel or move affected clients to suitable 5GHz would not address the need for upgrade or rebalance the constrained link after validating demand.

C:

Replan AP channels and steer capable clients to less-contended bands would not address the need for upgrade or rebalance the constrained link after validating demand.

D:

Using PMTUD support or correct tunnel MSS clamping for the available MTU would not address the need for upgrade or rebalance the constrained link after validating demand.

Question 746

A network team addresses this situation: An application runs between 10GbE hosts but traverses a 1Gbps WAN router and never exceeds 900Mbps. After the corrective action, which test or result BEST verifies that the problem is resolved?

  1. Correlate spectrum spikes with retry rates before and after mitigation.
  2. Compare per-link utilization during a controlled transfer.
  3. Probe the path with varying DF packet lengths.
  4. Compare channel utilization and airtime wait after retuning.

Explanation

Correct Answer

B:

The saturated hop identifies the limiting component.

Incorrect Answers

A:

Correlate spectrum spikes with retry rates before and after mitigation. Verification of this result involves comparing per-link utilization during a controlled transfer.

C:

Probe the path with varying DF packet lengths. That check cannot demonstrate the current HTTP endpoint and expected application response.

D:

Compare channel utilization and airtime wait after retuning. Verification of this result involves comparing per-link utilization during a controlled transfer.

Question 747

A network specialist investigates this evidence: An application runs between 10GbE hosts but traverses a 1Gbps WAN router and never exceeds 900Mbps. Which underlying condition BEST explains the observed failure or requirement?

  1. An intermittent 2.4GHz interferer disrupts radio reception.
  2. Too many devices contend for the same radio channel.
  3. The slowest shared link limits end-to-end throughput.
  4. Path MTU is smaller than endpoint packet size.

Explanation

Correct Answer

C:

The slowest shared link limits end-to-end throughput. End-to-end throughput cannot exceed a bottleneck's usable capacity.

Incorrect Answers

A:

An intermittent 2.4GHz interferer disrupts radio reception. That does not establish the slowest shared link limits end-to-end throughput.

B:

Too many devices contend for the same radio channel. That does not establish the slowest shared link limits end-to-end throughput.

D:

Frame and path MTU limits can drop oversized packets without changing higher-layer routes. The missing change involves the slowest shared link limits end-to-end throughput.

Question 748

A network team observes: Monitoring shows average uplink utilization only 30 percent, but switch buffer drops occur during short synchronized backups. What is the MOST appropriate corrective action or technical decision?

  1. Repair fiber loss or select compatible reach optics with adequate margin.
  2. Select latency-tolerant applications or lower-latency transport where required.
  3. Replan AP channels and steer capable clients to less-contended bands.
  4. Adjust traffic pacing or appropriate buffering and QoS policies.

Explanation

Correct Answer

D:

Subsecond bursts can exceed egress queue capacity. Microbursts overwhelm small queues even with low interval averages.

Incorrect Answers

A:

Repairing fiber loss or select compatible reach optics with adequate margin would not adjust traffic pacing or appropriate buffering and QoS policies.

B:

Selecting latency-tolerant applications or lower-latency transport where required would not adjust traffic pacing or appropriate buffering and QoS policies.

C:

Replan AP channels and steer capable clients to less-contended bands would not adjust traffic pacing or appropriate buffering and QoS policies.

Question 749

A network team addresses this situation: Monitoring shows average uplink utilization only 30 percent, but switch buffer drops occur during short synchronized backups. After the corrective action, which test or result BEST verifies that the problem is resolved?

  1. Collect high-resolution drop counters during synchronized backup starts.
  2. Measure RTP interarrival jitter and call quality under load.
  3. Probe the path with varying DF packet lengths.
  4. Compare RTT on the satellite and a terrestrial backup link.

Explanation

Correct Answer

A:

TCP connections require an accepted SYN, SYN-ACK and ACK exchange before application requests. Verification of this result involves collecting high-resolution drop counters during synchronized backup starts.

Incorrect Answers

B:

Measure RTP interarrival jitter and call quality under load. That check cannot demonstrate completion of the TCP three-way handshake.

C:

Probe the path with varying DF packet lengths. That check cannot demonstrate completion of the TCP three-way handshake.

D:

Compare RTT on the satellite and a terrestrial backup link. That check cannot demonstrate completion of the TCP three-way handshake.

Question 750

A network specialist investigates this evidence: Monitoring shows average uplink utilization only 30 percent, but switch buffer drops occur during short synchronized backups. Which underlying condition BEST explains the observed failure or requirement?

  1. The slowest shared link limits end-to-end throughput.
  2. Microbursts overwhelm small queues even with low interval averages.
  3. The optical receive signal is below supported sensitivity.
  4. Too many devices contend for the same radio channel.

Explanation

Correct Answer

B:

Microbursts overwhelm small queues even with low interval averages. Subsecond bursts can exceed egress queue capacity.

Incorrect Answers

A:

The slowest shared link limits end-to-end throughput. That does not establish microbursts overwhelm small queues even with low interval averages.

C:

Optical transceiver compatibility and receive-light measurements diagnose the physical signal path before higher-layer work. That does not establish microbursts overwhelm small queues even with low interval averages.

D:

Too many devices contend for the same radio channel. That does not establish microbursts overwhelm small queues even with low interval averages.


CompTIA Network+ (N10-009) Practice Tests

Purchase Individually

N10-009 Premium File

Premium File
N10-009 Premium File
768 Q&A
$76.99$69.99

N10-009 Training Video Course

Training Course
N10-009 Training Video Course
240 Lectures
$27.49$24.99

N10-009 Study Guide

Study Guide
N10-009 Study Guide
128 PDF Pages
$27.49$24.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.