Question 610
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A developer installs VirtualBox on their everyday desktop operating system to test a legacy application in a guest OS. A user believes a virtual machine runs without any underlying hardware because its disk is a file rather than a physical drive. What is the most appropriate plan for this situation?
- Classify the platform as a type 1 bare-metal hypervisor; Allocate virtual CPUs through the hypervisor according to available host resources.
- Classify the setup as a type 2 hosted hypervisor; Explain that the guest consumes host CPU, RAM, storage and network resources.
- Classify the platform as a type 1 bare-metal hypervisor; Explain that the guest consumes host CPU, RAM, storage and network resources.
- Classify the setup as a type 2 hosted hypervisor; Allocate virtual CPUs through the hypervisor according to available host resources.
Explanation
Correct Answer
B:For ticket (1), Hosted hypervisors run as applications above an existing general-purpose operating system. For ticket (2), Virtual hardware abstractions depend on real host capacity and virtualization controls.
Incorrect Answers
A:For ticket 1, classify the setup as a type 2 hosted hypervisor. Hosted hypervisors run as applications above an existing general-purpose operating system. For ticket 2, explain that the guest consumes host CPU, RAM, storage and network resources. Virtual hardware abstractions depend on real host capacity and virtualization controls.
C:For ticket 1, classify the setup as a type 2 hosted hypervisor. Hosted hypervisors run as applications above an existing general-purpose operating system.
D:For ticket 2, explain that the guest consumes host CPU, RAM, storage and network resources. Virtual hardware abstractions depend on real host capacity and virtualization controls.
Question 611
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: An administrator wants multiple guests on one physical server but assumes each guest has to own a separate physical CPU. A user believes a virtual machine runs without any underlying hardware because its disk is a file rather than a physical drive. Which course of action addresses the stated issues?
- Classify the platform as a type 1 bare-metal hypervisor; Classify the setup as a type 2 hosted hypervisor.
- Allocate virtual CPUs through the hypervisor according to available host resources; Explain that the guest consumes host CPU, RAM, storage and network resources.
- Classify the platform as a type 1 bare-metal hypervisor; Explain that the guest consumes host CPU, RAM, storage and network resources.
- Allocate virtual CPUs through the hypervisor according to available host resources; Classify the setup as a type 2 hosted hypervisor.
Explanation
Correct Answer
B:For ticket (1), Virtualization schedules multiple logical guest CPU contexts across underlying processors. For ticket (2), Virtual hardware abstractions depend on real host capacity and virtualization controls.
Incorrect Answers
A:For ticket 1, allocate virtual CPUs through the hypervisor according to available host resources. Virtualization schedules multiple logical guest CPU contexts across underlying processors. For ticket 2, explain that the guest consumes host CPU, RAM, storage and network resources. Virtual hardware abstractions depend on real host capacity and virtualization controls.
C:For ticket 1, allocate virtual CPUs through the hypervisor according to available host resources. Virtualization schedules multiple logical guest CPU contexts across underlying processors.
D:For ticket 2, explain that the guest consumes host CPU, RAM, storage and network resources. Virtual hardware abstractions depend on real host capacity and virtualization controls.
Question 612
A service coordinator has THREE separate support tickets and needs the correct matching actions: A datacenter server runs virtual machines directly on a dedicated virtualization platform without a conventional desktop host OS. A developer installs VirtualBox on their everyday desktop operating system to test a legacy application in a guest OS. An administrator wants multiple guests on one physical server but assumes each guest has to own a separate physical CPU. Which response best addresses these needs?
- Classify the platform as a type 1 bare-metal hypervisor; Explain that the guest consumes host CPU, RAM, storage and network resources; and Allocate virtual CPUs through the hypervisor according to available host resources.
- Classify the platform as a type 1 bare-metal hypervisor; Classify the setup as a type 2 hosted hypervisor; and Explain that the guest consumes host CPU, RAM, storage and network resources.
- Classify the platform as a type 1 bare-metal hypervisor; Classify the setup as a type 2 hosted hypervisor; and Allocate virtual CPUs through the hypervisor according to available host resources.
- Explain that the guest consumes host CPU, RAM, storage and network resources; Classify the setup as a type 2 hosted hypervisor; and Allocate virtual CPUs through the hypervisor according to available host resources.
Explanation
Correct Answer
C:For ticket (1), Type 1 hypervisors manage hardware resources directly for hosted guest workloads. For ticket (2), Hosted hypervisors run as applications above an existing general-purpose operating system. For ticket (3), Virtualization schedules multiple logical guest CPU contexts across underlying processors.
Incorrect Answers
A:For ticket 2, classify the setup as a type 2 hosted hypervisor. Hosted hypervisors run as applications above an existing general-purpose operating system.
B:For ticket 3, allocate virtual CPUs through the hypervisor according to available host resources. Virtualization schedules multiple logical guest CPU contexts across underlying processors.
D:For ticket 1, classify the platform as a type 1 bare-metal hypervisor. Type 1 hypervisors manage hardware resources directly for hosted guest workloads.
Question 613
During a controlled office IT maintenance window, the technician notes: A desktop Ethernet adapter reports no link light after cable routing changes, but the switch port tests healthy with another cable. What is the MOST appropriate technician action?
- Follow approved fiber cleaning and inspection procedures before replacing the network switch.
- Replace the faulty patch lead and verify correct termination and continuity.
- Repair or replace the cable and retest all required pairs.
- Re-terminate to a consistent T568A or T568B scheme and certify pair mapping.
Explanation
Correct Answer
B:A broken copper pair can stop physical link negotiation even with functioning endpoints.
Incorrect Answers
A:Follow approved fiber cleaning and inspection procedures would not replace the faulty patch lead and verify correct termination and continuity.
C:Repairing or replace the cable and retest all required pairs would not replace the faulty patch lead and verify correct termination and continuity.
D:Re-terminate to a consistent T568A or T568B scheme and certify pair mapping would not replace the faulty patch lead and verify correct termination and continuity.
Question 614
A support case documents the following situation: An office uplink negotiates at 100 Mb/s instead of 1 Gb/s and a cable tester detects a missing twisted pair. Which response BEST addresses the actual cause or requirement?
- Re-terminate to a consistent T568A or T568B scheme and certify pair mapping.
- Follow approved fiber cleaning and inspection procedures before replacing the network switch.
- Replace the faulty patch lead and verify correct termination and continuity.
- Repair or replace the cable and retest all required pairs.
Explanation
Correct Answer
D:Gigabit twisted-pair Ethernet requires all four correctly connected pairs.
Incorrect Answers
A:Re-terminate to a consistent T568A or T568B scheme and certify pair mapping would not repair or replace the cable and retest all required pairs.
B:Follow approved fiber cleaning and inspection procedures would not repair or replace the cable and retest all required pairs. Gigabit twisted-pair Ethernet requires all four correctly connected pairs.
C:Replacing the faulty patch lead and verifying correct termination and continuity would not repair or replace the cable and retest all required pairs.
Question 615
A device support specialist must respond to this request: A cable run is terminated using a different pair order at each end, and performance becomes unstable across longer distances. Which next step MOST directly resolves the reported condition?
- Replace the faulty patch lead and verify correct termination and continuity.
- Repair or replace the cable and retest all required pairs.
- Re-terminate to a consistent T568A or T568B scheme and certify pair mapping.
- Follow approved fiber cleaning and inspection procedures before replacing the network switch.
Explanation
Correct Answer
C:Pair miswiring can create split-pair and signal-quality problems even when continuity appears present.
Incorrect Answers
A:A broken copper pair can stop physical link negotiation even with functioning endpoints; pair miswiring can create split-pair and signal-quality problems even when continuity appears present.
B:Gigabit twisted-pair Ethernet requires all four correctly connected pairs; pair miswiring can create split-pair and signal-quality problems even when continuity appears present.
D:Optical contamination can attenuate signals enough to cause intermittent connectivity; pair miswiring can create split-pair and signal-quality problems even when continuity appears present.
Question 616
An end user reports the following condition: A remote building's fiber link flaps after dirt is observed on an LC connector ferrule. What should the support specialist recommend FIRST within the stated limits?
- Re-terminate to a consistent T568A or T568B scheme and certify pair mapping.
- Follow approved fiber cleaning and inspection procedures before replacing the network switch.
- Replace the faulty patch lead and verify correct termination and continuity.
- Repair or replace the cable and retest all required pairs.
Explanation
Correct Answer
B:Optical contamination can attenuate signals enough to cause intermittent connectivity.
Incorrect Answers
A:Pair miswiring can create split-pair and signal-quality problems even when continuity appears present; optical contamination can attenuate signals enough to cause intermittent connectivity.
C:A broken copper pair can stop physical link negotiation even with functioning endpoints; optical contamination can attenuate signals enough to cause intermittent connectivity.
D:Gigabit twisted-pair Ethernet requires all four correctly connected pairs; optical contamination can attenuate signals enough to cause intermittent connectivity.
Question 617
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A desktop Ethernet adapter reports no link light after cable routing changes, but the switch port tests healthy with another cable. An office uplink negotiates at 100 Mb/s instead of 1 Gb/s and a cable tester detects a missing twisted pair. Which course of action addresses the stated issues?
- Replace the faulty patch lead and verify correct termination and continuity; Repair or replace the cable and retest all required pairs.
- Re-terminate to a consistent T568A or T568B scheme and certify pair mapping; Repair or replace the cable and retest all required pairs.
- Replace the faulty patch lead and verify correct termination and continuity; Follow approved fiber cleaning and inspection procedures before replacing the network switch.
- Re-terminate to a consistent T568A or T568B scheme and certify pair mapping; Follow approved fiber cleaning and inspection procedures before replacing the network switch.
Explanation
Correct Answer
A:For ticket (1), A broken copper pair can stop physical link negotiation even with functioning endpoints. For ticket (2), Gigabit twisted-pair Ethernet requires all four correctly connected pairs.
Incorrect Answers
B:For ticket 1, replace the faulty patch lead and verify correct termination and continuity. A broken copper pair can stop physical link negotiation even with functioning endpoints.
C:For ticket 2, repair or replace the cable and retest all required pairs. Gigabit twisted-pair Ethernet requires all four correctly connected pairs.
D:For ticket 1, replace the faulty patch lead and verify correct termination and continuity. A broken copper pair can stop physical link negotiation even with functioning endpoints. For ticket 2, repair or replace the cable and retest all required pairs. Gigabit twisted-pair Ethernet requires all four correctly connected pairs.
Question 618
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A desktop Ethernet adapter reports no link light after cable routing changes, but the switch port tests healthy with another cable. A cable run is terminated using a different pair order at each end, and performance becomes unstable across longer distances. Which response best addresses these needs?
- Repair or replace the cable and retest all required pairs; Follow approved fiber cleaning and inspection procedures before replacing the network switch.
- Replace the faulty patch lead and verify correct termination and continuity; Re-terminate to a consistent T568A or T568B scheme and certify pair mapping.
- Repair or replace the cable and retest all required pairs; Re-terminate to a consistent T568A or T568B scheme and certify pair mapping.
- Replace the faulty patch lead and verify correct termination and continuity; Follow approved fiber cleaning and inspection procedures before replacing the network switch.
Explanation
Correct Answer
B:For ticket (1), A broken copper pair can stop physical link negotiation even with functioning endpoints. For ticket (2), Pair miswiring can create split-pair and signal-quality problems even when continuity appears present.
Incorrect Answers
A:For ticket 1, replace the faulty patch lead and verify correct termination and continuity. A broken copper pair can stop physical link negotiation even with functioning endpoints. For ticket 2, re-terminate to a consistent T568A or T568B scheme and certify pair mapping. Pair miswiring can create split-pair and signal-quality problems even when continuity appears present.
C:For ticket 1, replace the faulty patch lead and verify correct termination and continuity. A broken copper pair can stop physical link negotiation even with functioning endpoints.
D:For ticket 2, re-terminate to a consistent T568A or T568B scheme and certify pair mapping. Pair miswiring can create split-pair and signal-quality problems even when continuity appears present.
Question 619
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: An office uplink negotiates at 100 Mb/s instead of 1 Gb/s and a cable tester detects a missing twisted pair. A remote building's fiber link flaps after dirt is observed on an LC connector ferrule. What is the most appropriate plan for this situation?
- Repair or replace the cable and retest all required pairs; Re-terminate to a consistent T568A or T568B scheme and certify pair mapping.
- Replace the faulty patch lead and verify correct termination and continuity; Re-terminate to a consistent T568A or T568B scheme and certify pair mapping.
- Repair or replace the cable and retest all required pairs; Follow approved fiber cleaning and inspection procedures before replacing the network switch.
- Replace the faulty patch lead and verify correct termination and continuity; Follow approved fiber cleaning and inspection procedures before replacing the network switch.
Explanation
Correct Answer
C:For ticket (1), Gigabit twisted-pair Ethernet requires all four correctly connected pairs. For ticket (2), Optical contamination can attenuate signals enough to cause intermittent connectivity.
Incorrect Answers
A:For ticket 2, follow approved fiber cleaning and inspection procedures before replacing the network switch. Optical contamination can attenuate signals enough to cause intermittent connectivity.
B:For ticket 1, repair or replace the cable and retest all required pairs. Gigabit twisted-pair Ethernet requires all four correctly connected pairs. For ticket 2, follow approved fiber cleaning and inspection procedures before replacing the network switch. Optical contamination can attenuate signals enough to cause intermittent connectivity.
D:For ticket 1, repair or replace the cable and retest all required pairs. Gigabit twisted-pair Ethernet requires all four correctly connected pairs.
Question 620
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A cable run is terminated using a different pair order at each end, and performance becomes unstable across longer distances. A remote building's fiber link flaps after dirt is observed on an LC connector ferrule. Which course of action addresses the stated issues?
- Re-terminate to a consistent T568A or T568B scheme and certify pair mapping; Repair or replace the cable and retest all required pairs.
- Replace the faulty patch lead and verify correct termination and continuity; Repair or replace the cable and retest all required pairs.
- Re-terminate to a consistent T568A or T568B scheme and certify pair mapping; Follow approved fiber cleaning and inspection procedures before replacing the network switch.
- Replace the faulty patch lead and verify correct termination and continuity; Follow approved fiber cleaning and inspection procedures before replacing the network switch.
Explanation
Correct Answer
C:For ticket (1), Pair miswiring can create split-pair and signal-quality problems even when continuity appears present. For ticket (2), Optical contamination can attenuate signals enough to cause intermittent connectivity.
Incorrect Answers
A:For ticket 2, follow approved fiber cleaning and inspection procedures before replacing the network switch. Optical contamination can attenuate signals enough to cause intermittent connectivity.
B:For ticket 1, re-terminate to a consistent T568A or T568B scheme and certify pair mapping. Pair miswiring can create split-pair and signal-quality problems even when continuity appears present. For ticket 2, follow approved fiber cleaning and inspection procedures before replacing the network switch. Optical contamination can attenuate signals enough to cause intermittent connectivity.
D:For ticket 1, re-terminate to a consistent T568A or T568B scheme and certify pair mapping. Pair miswiring can create split-pair and signal-quality problems even when continuity appears present.
CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests