Question 540
A service coordinator has THREE separate support tickets and needs the correct matching actions: A new multifunction laser printer is unpacked but will not feed paper because shipping transport locks remain attached. A shared printer accepts jobs but prints unreadable characters after a client installs an incompatible driver language. A printer vendor releases a security firmware update, and the technician plans to flash it during an unprotected power outage window. Which response best addresses these needs?
- Remove documented packing restraints and initialize the printer according to the setup procedure; install the appropriate supported PCL or PostScript printer driver for that device; and configure supported Ethernet or wireless connectivity with centrally managed sharing as required.
- Remove documented packing restraints and initialize the printer according to the setup procedure; install the appropriate supported PCL or PostScript printer driver for that device; and schedule the approved firmware update with reliable power and rollback guidance.
- Configure supported Ethernet or wireless connectivity with centrally managed sharing as required; install the appropriate supported PCL or PostScript printer driver for that device; and schedule the approved firmware update with reliable power and rollback guidance.
- Remove documented packing restraints and initialize the printer according to the setup procedure; configure supported Ethernet or wireless connectivity with centrally managed sharing as required; and schedule the approved firmware update with reliable power and rollback guidance.
Explanation
Correct Answer
B:For ticket (1), Transport materials protect moving printer mechanisms but can prevent first-use operation. For ticket (2), Driver page-description language must match what the printer firmware can interpret. For ticket (3), Interrupted firmware changes can leave peripheral devices unusable.
Incorrect Answers
A:For ticket 3, schedule the approved firmware update with reliable power and rollback guidance. Interrupted firmware changes can leave peripheral devices unusable.
C:For ticket 1, remove documented packing restraints and initialize the printer according to the setup procedure. Transport materials protect moving printer mechanisms but can prevent first-use operation.
D:For ticket 2, install the appropriate supported PCL or PostScript printer driver for that device. Driver page-description language must match what the printer firmware can interpret.
Question 541
During a controlled office IT maintenance window, the technician notes: A compact notebook accepts SODIMMs and a technician orders full-sized desktop DIMMs with the same nominal memory capacity. What is the MOST appropriate technician action?
- Match the supported M.2 length and keying before attempting installation.
- Verify backup, encryption recovery access, and data-handling approval before removing the drive.
- Reseat and test the memory in the documented slot configuration before declaring a bad motherboard.
- Choose the supported SODIMM form factor and speed listed by the notebook's service documentation.
Explanation
Correct Answer
D:Capacity alone cannot overcome a physical socket and electrical form-factor mismatch.
Incorrect Answers
A:M.2 modules vary in physical dimensions and not all boards provide every mounting location; capacity alone cannot overcome a physical socket and electrical form-factor mismatch.
B:Physical replacement can make encrypted files inaccessible if recovery material and custody plans are missing; capacity alone cannot overcome a physical socket and electrical form-factor mismatch.
C:Partial insertion can cause memory-training or boot failures even when the module specification is correct; capacity alone cannot overcome a physical socket and electrical form-factor mismatch.
Question 542
A support case documents the following situation: A laptop SSD upgrade fails to fit because the purchased M.2 module is longer than the device's available standoff position. Which response BEST addresses the actual cause or requirement?
- Choose the supported SODIMM form factor and speed listed by the notebook's service documentation.
- Match the supported M.2 length and keying before attempting installation.
- Verify backup, encryption recovery access, and data-handling approval before removing the drive.
- Reseat and test the memory in the documented slot configuration before declaring a bad motherboard.
Explanation
Correct Answer
B:M.2 modules vary in physical dimensions and not all boards provide every mounting location.
Incorrect Answers
A:Choosing the supported SODIMM form factor and speed listed by the notebook's service documentation would not match the supported M.2 length and keying.
C:Verifying backup, encryption recovery access, and data-handling approval would not match the supported M.2 length and keying.
D:Reseat and test the memory in the documented slot configuration would not match the supported M.2 length and keying.
Question 543
A device support specialist must respond to this request: A laptop requires a storage replacement, but the owner has not confirmed whether the existing disk contains recoverable encrypted business files. Which next step MOST directly resolves the reported condition?
- Match the supported M.2 length and keying before attempting installation.
- Verify backup, encryption recovery access, and data-handling approval before removing the drive.
- Reseat and test the memory in the documented slot configuration before declaring a bad motherboard.
- Choose the supported SODIMM form factor and speed listed by the notebook's service documentation.
Explanation
Correct Answer
B:Physical replacement can make encrypted files inaccessible if recovery material and custody plans are missing.
Incorrect Answers
A:Matching the supported M.2 length and keying would not verify backup, encryption recovery access, and data-handling approval.
C:Reseat and test the memory in the documented slot configuration would not verify backup, encryption recovery access, and data-handling approval.
D:Choosing the supported SODIMM form factor and speed listed by the notebook's service documentation would not verify backup, encryption recovery access, and data-handling approval.
Question 544
An end user reports the following condition: After a compatible SODIMM is fitted, the laptop fails POST until the technician removes the new module and reseats it. What should the support specialist recommend FIRST within the stated limits?
- Verify backup, encryption recovery access, and data-handling approval before removing the drive.
- Reseat and test the memory in the documented slot configuration before declaring a bad motherboard.
- Choose the supported SODIMM form factor and speed listed by the notebook's service documentation.
- Match the supported M.2 length and keying before attempting installation.
Explanation
Correct Answer
B:Partial insertion can cause memory-training or boot failures even when the module specification is correct.
Incorrect Answers
A:Physical replacement can make encrypted files inaccessible if recovery material and custody plans are missing; partial insertion can cause memory-training or boot failures even when the module specification is correct.
C:Capacity alone cannot overcome a physical socket and electrical form-factor mismatch; partial insertion can cause memory-training or boot failures even when the module specification is correct.
D:M.2 modules vary in physical dimensions and not all boards provide every mounting location; partial insertion can cause memory-training or boot failures even when the module specification is correct.
Question 545
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A compact notebook accepts SODIMMs and a technician orders full-sized desktop DIMMs with the same nominal memory capacity. A laptop SSD upgrade fails to fit because the purchased M.2 module is longer than the device's available standoff position. Which course of action addresses the stated issues?
- Verify backup, encryption recovery access, and data-handling approval before removing the drive; Reseat and test the memory in the documented slot configuration before declaring a bad motherboard.
- Choose the supported SODIMM form factor and speed listed by the notebook's service documentation; Match the supported M.2 length and keying before attempting installation.
- Verify backup, encryption recovery access, and data-handling approval before removing the drive; Match the supported M.2 length and keying before attempting installation.
- Choose the supported SODIMM form factor and speed listed by the notebook's service documentation; Reseat and test the memory in the documented slot configuration before declaring a bad motherboard.
Explanation
Correct Answer
B:For ticket (1), Capacity alone cannot overcome a physical socket and electrical form-factor mismatch. For ticket (2), M.2 modules vary in physical dimensions and not all boards provide every mounting location.
Incorrect Answers
A:For ticket 1, choose the supported SODIMM form factor and speed listed by the notebook's service documentation. Capacity alone cannot overcome a physical socket and electrical form-factor mismatch. For ticket 2, match the supported M.2 length and keying before attempting installation. M.2 modules vary in physical dimensions and not all boards provide every mounting location.
C:For ticket 1, choose the supported SODIMM form factor and speed listed by the notebook's service documentation. Capacity alone cannot overcome a physical socket and electrical form-factor mismatch.
D:For ticket 2, match the supported M.2 length and keying before attempting installation. M.2 modules vary in physical dimensions and not all boards provide every mounting location.
Question 546
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A compact notebook accepts SODIMMs and a technician orders full-sized desktop DIMMs with the same nominal memory capacity. A laptop requires a storage replacement, but the owner has not confirmed whether the existing disk contains recoverable encrypted business files. Which response best addresses these needs?
- Match the supported M.2 length and keying before attempting installation; Reseat and test the memory in the documented slot configuration before declaring a bad motherboard.
- Choose the supported SODIMM form factor and speed listed by the notebook's service documentation; verify backup, encryption recovery access, and data-handling approval before removing the drive.
- Match the supported M.2 length and keying before attempting installation; verify backup, encryption recovery access, and data-handling approval before removing the drive.
- Choose the supported SODIMM form factor and speed listed by the notebook's service documentation; Reseat and test the memory in the documented slot configuration before declaring a bad motherboard.
Explanation
Correct Answer
B:For ticket (1), Capacity alone cannot overcome a physical socket and electrical form-factor mismatch. For ticket (2), Physical replacement can make encrypted files inaccessible if recovery material and custody plans are missing.
Incorrect Answers
A:For ticket 1, choose the supported SODIMM form factor and speed listed by the notebook's service documentation. Capacity alone cannot overcome a physical socket and electrical form-factor mismatch. For ticket 2, verify backup, encryption recovery access, and data-handling approval before removing the drive. Physical replacement can make encrypted files inaccessible if recovery material and custody plans are missing.
C:For ticket 1, choose the supported SODIMM form factor and speed listed by the notebook's service documentation. Capacity alone cannot overcome a physical socket and electrical form-factor mismatch.
D:For ticket 2, verify backup, encryption recovery access, and data-handling approval before removing the drive. Physical replacement can make encrypted files inaccessible if recovery material and custody plans are missing.
Question 547
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A laptop SSD upgrade fails to fit because the purchased M.2 module is longer than the device's available standoff position. After a compatible SODIMM is fitted, the laptop fails POST until the technician removes the new module and reseats it. What is the most appropriate plan for this situation?
- Match the supported M.2 length and keying before attempting installation; Reseat and test the memory in the documented slot configuration before declaring a bad motherboard.
- Choose the supported SODIMM form factor and speed listed by the notebook's service documentation; Reseat and test the memory in the documented slot configuration before declaring a bad motherboard.
- Match the supported M.2 length and keying before attempting installation; verify backup, encryption recovery access, and data-handling approval before removing the drive.
- Choose the supported SODIMM form factor and speed listed by the notebook's service documentation; verify backup, encryption recovery access, and data-handling approval before removing the drive.
Explanation
Correct Answer
A:For ticket (1), M.2 modules vary in physical dimensions and not all boards provide every mounting location. For ticket (2), Partial insertion can cause memory-training or boot failures even when the module specification is correct.
Incorrect Answers
B:For ticket 1, match the supported M.2 length and keying before attempting installation. M.2 modules vary in physical dimensions and not all boards provide every mounting location.
C:For ticket 2, reseat and test the memory in the documented slot configuration before declaring a bad motherboard. Partial insertion can cause memory-training or boot failures even when the module specification is correct.
D:For ticket 1, match the supported M.2 length and keying before attempting installation. M.2 modules vary in physical dimensions and not all boards provide every mounting location. For ticket 2, reseat and test the memory in the documented slot configuration before declaring a bad motherboard. Partial insertion can cause memory-training or boot failures even when the module specification is correct.
Question 548
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A laptop requires a storage replacement, but the owner has not confirmed whether the existing disk contains recoverable encrypted business files. After a compatible SODIMM is fitted, the laptop fails POST until the technician removes the new module and reseats it. Which course of action addresses the stated issues?
- Choose the supported SODIMM form factor and speed listed by the notebook's service documentation; Reseat and test the memory in the documented slot configuration before declaring a bad motherboard.
- Verify backup, encryption recovery access, and data-handling approval before removing the drive; Match the supported M.2 length and keying before attempting installation.
- Choose the supported SODIMM form factor and speed listed by the notebook's service documentation; Match the supported M.2 length and keying before attempting installation.
- Verify backup, encryption recovery access, and data-handling approval before removing the drive; Reseat and test the memory in the documented slot configuration before declaring a bad motherboard.
Explanation
Correct Answer
D:For ticket (1), Physical replacement can make encrypted files inaccessible if recovery material and custody plans are missing. For ticket (2), Partial insertion can cause memory-training or boot failures even when the module specification is correct.
Incorrect Answers
A:For ticket 1, verify backup, encryption recovery access, and data-handling approval before removing the drive. Physical replacement can make encrypted files inaccessible if recovery material and custody plans are missing.
B:For ticket 2, reseat and test the memory in the documented slot configuration before declaring a bad motherboard. Partial insertion can cause memory-training or boot failures even when the module specification is correct.
C:For ticket 1, verify backup, encryption recovery access, and data-handling approval before removing the drive. Physical replacement can make encrypted files inaccessible if recovery material and custody plans are missing. For ticket 2, reseat and test the memory in the documented slot configuration before declaring a bad motherboard. Partial insertion can cause memory-training or boot failures even when the module specification is correct.
Question 549
A service coordinator has THREE separate support tickets and needs the correct matching actions: A compact notebook accepts SODIMMs and a technician orders full-sized desktop DIMMs with the same nominal memory capacity. A laptop SSD upgrade fails to fit because the purchased M.2 module is longer than the device's available standoff position. A laptop requires a storage replacement, but the owner has not confirmed whether the existing disk contains recoverable encrypted business files. Which response best addresses these needs?
- Choose the supported SODIMM form factor and speed listed by the notebook's service documentation; Match the supported M.2 length and keying before attempting installation; and verify backup, encryption recovery access, and data-handling approval before removing the drive.
- Reseat and test the memory in the documented slot configuration before declaring a bad motherboard; Match the supported M.2 length and keying before attempting installation; and verify backup, encryption recovery access, and data-handling approval before removing the drive.
- Choose the supported SODIMM form factor and speed listed by the notebook's service documentation; Reseat and test the memory in the documented slot configuration before declaring a bad motherboard; and verify backup, encryption recovery access, and data-handling approval before removing the drive.
- Choose the supported SODIMM form factor and speed listed by the notebook's service documentation; Match the supported M.2 length and keying before attempting installation; and Reseat and test the memory in the documented slot configuration before declaring a bad motherboard.
Explanation
Correct Answer
A:For ticket (1), Capacity alone cannot overcome a physical socket and electrical form-factor mismatch. For ticket (2), M.2 modules vary in physical dimensions and not all boards provide every mounting location. For ticket (3), Physical replacement can make encrypted files inaccessible if recovery material and custody plans are missing.
Incorrect Answers
B:For ticket 1, choose the supported SODIMM form factor and speed listed by the notebook's service documentation. Capacity alone cannot overcome a physical socket and electrical form-factor mismatch.
C:For ticket 2, match the supported M.2 length and keying before attempting installation. M.2 modules vary in physical dimensions and not all boards provide every mounting location.
D:For ticket 3, verify backup, encryption recovery access, and data-handling approval before removing the drive. Physical replacement can make encrypted files inaccessible if recovery material and custody plans are missing.
Question 550
A support case documents the following situation: A laptop keyboard produces several dead keys after a liquid spill, but an external USB keyboard functions normally. Which response BEST addresses the actual cause or requirement?
- Release the specified ZIF latch and withdraw the ribbon straight before removing the keyboard.
- Check the firmware or keyboard utility's function-key mode setting before replacing hardware.
- Disconnect power and assess the internal keyboard assembly and ribbon connection before fitting a compatible replacement.
- Check the exact chassis service part number and replace it with the correct matching keyboard assembly.
Explanation
Correct Answer
C:Working external input isolates the fault to the integrated keyboard path rather than the whole operating system.
Incorrect Answers
A:Small ribbon connectors are designed for latch release, not pulling against an engaged clamp; working external input isolates the fault to the integrated keyboard path rather than the whole operating system.
B:Firmware hotkey behavior changes key mapping without requiring a defective physical keyboard; working external input isolates the fault to the integrated keyboard path rather than the whole operating system.
D:Similar keycaps do not guarantee that a keyboard's ribbon location and matrix wiring are compatible; working external input isolates the fault to the integrated keyboard path rather than the whole operating system.
CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests