Question 840
A SAN change places multiple unrelated hosts and several targets in one broad Fibre Channel zone to simplify access. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN. Which qualification should the change record include?
- A redundant fabric cannot protect traffic that was incorrectly attached to a single SAN path.
- A permissive zone may increase unintended device visibility even when array LUN masking also exists.
- Assuming that every local command is distributed automatically can leave peers inconsistent.
- Saving a zoneset definition alone does not establish that it is the enforced active zoning policy.
Explanation
Correct Answer
B:A permissive zone may increase unintended device visibility even when array LUN masking also exists. Tightly scoped FC zones limit which initiators can discover or communicate with designated targets. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN.
Incorrect Answers
A:A redundant fabric cannot protect traffic that was incorrectly attached to a single SAN path. This concerns mds epld update impact, not single-initiator zoning.
C:Assuming that every local command is distributed automatically can leave peers inconsistent. This concerns cisco fabric services distribution, not single-initiator zoning.
D:Saving a zoneset definition alone does not establish that it is the enforced active zoning policy. This concerns zoneset activation state, not single-initiator zoning.
Question 841
A new MDS FC port channel comes up with only one member while the remaining ports are suspended. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN. Which test result best demonstrates restoration of the intended behavior?
- All expected FC interfaces are active members and fabric traffic remains available after a link failure.
- Error counters stop increasing after the physical fix and application storage latency improves.
- The initiator appears in FLOGI with an FCID and can proceed to authorized name-server discovery.
- Domain IDs become unique and stable, fabric merge completes and attached initiators retain valid paths.
Explanation
Correct Answer
A:All expected FC interfaces are active members and fabric traffic remains available after a link failure. This result tests the original failure rather than reporting merely that the configuration command was accepted. Fibre Channel port channels bundle compatible physical links; inconsistent member configuration can suspend interfaces. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN.
Incorrect Answers
B:Error counters stop increasing after the physical fix and application storage latency improves. This concerns SAN port error telemetry, not fibre channel port-channel consistency.
C:The initiator appears in FLOGI with an FCID and can proceed to authorized name-server discovery. This concerns fibre channel fabric login, not fibre channel port-channel consistency.
D:Domain IDs become unique and stable, fabric merge completes and attached initiators retain valid paths. This concerns fcid and domain id stability, not fibre channel port-channel consistency.
Question 842
A storage administrator must inspect FC zoning health but an inherited MDS role grants access to fabric-wide reconfiguration. A follow-up access review asks the team to validate the same boundary with a controlled negative test. Why is the targeted engineering response justified in this situation?
- DHCP snooping should accept DHCP server responses from trusted paths while suppressing rogue access-port servers.
- Fabric binding controls which fabric switches are allowed to join trusted SAN connections.
- Storage network RBAC limits configuration actions independently of physical access to SAN switches.
- FC port security can restrict which device WWNs are permitted to connect through designated fabric ports.
Explanation
Correct Answer
C:Storage network RBAC limits configuration actions independently of physical access to SAN switches. A follow-up access review asks the team to validate the same boundary with a controlled negative test.
Incorrect Answers
A:DHCP snooping should accept DHCP server responses from trusted paths while suppressing rogue access-port servers. This concerns DHCP snooping trusted uplink, not mds SAN administrative control.
B:Fabric binding controls which fabric switches are allowed to join trusted SAN connections. This concerns fabric binding membership, not mds SAN administrative control.
D:FC port security can restrict which device WWNs are permitted to connect through designated fabric ports. This concerns fibre channel port security, not mds SAN administrative control.
Question 843
A storage administrator zones a host using a node name although the fabric login is registered with a different port identifier. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN. Which evidence set most directly tests the suspected failure?
- Inspect upstream NPIV configuration, NPV status, uplink VSAN, FLOGI database and server WWPNs.
- Inspect FLOGI port WWPNs, host vHBA identities, target port IDs and zoning entries.
- Inspect trunk allowed lists, operational VSANs, fcdomain state and VSAN-specific fabric links.
- Inspect interface-to-VSAN membership, active zonesets, fabric IDs and authorized inter-VSAN designs.
Explanation
Correct Answer
B:Inspect FLOGI port WWPNs, host vHBA identities, target port IDs and zoning entries. These records help distinguish the suspected failure from a superficially similar fault before modifying production. Fibre Channel port WWNs identify individual interfaces used by fabric login and zoning policies. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN.
Incorrect Answers
A:Inspect upstream NPIV configuration, NPV status, uplink VSAN, FLOGI database and server WWPNs. This concerns npv uplink fabric services, not wwpn versus wwnn.
C:Inspect trunk allowed lists, operational VSANs, fcdomain state and VSAN-specific fabric links. This concerns VSAN trunk mismatch, not wwpn versus wwnn.
D:Inspect interface-to-VSAN membership, active zonesets, fabric IDs and authorized inter-VSAN designs. This concerns VSAN isolation, not wwpn versus wwnn.
Question 844
Clients connected to an access switch stop receiving DHCP leases after DHCP snooping is enabled. A follow-up access review asks the team to validate the same boundary with a controlled negative test. Which technical principle best explains the recommended response?
- ACI contracts control permitted communication between endpoint groups, separate from basic endpoint addressing.
- DAI verifies ARP bindings using trusted information and may reject legitimate fixed-address hosts without an authorized binding.
- IP source validation uses trusted bindings to prevent endpoints from impersonating unassigned source addresses.
- DHCP snooping should accept DHCP server responses from trusted paths while suppressing rogue access-port servers.
Explanation
Correct Answer
D:DHCP snooping should accept DHCP server responses from trusted paths while suppressing rogue access-port servers. A follow-up access review asks the team to validate the same boundary with a controlled negative test.
Incorrect Answers
A:ACI contracts control permitted communication between endpoint groups, separate from basic endpoint addressing. This concerns aci inter-epg contract, not DHCP snooping trusted uplink.
B:DAI verifies ARP bindings using trusted information and may reject legitimate fixed-address hosts without an authorized binding. This concerns dynamic ARP inspection source of truth, not DHCP snooping trusted uplink.
C:IP source validation uses trusted bindings to prevent endpoints from impersonating unassigned source addresses. This concerns first-hop ip/mac spoof defense, not DHCP snooping trusted uplink.
Question 845
Layer 2 VXLAN segments work but traffic between tenant IP subnets fails because the L3 VNI is associated with the wrong VRF. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence. Which controlled change is most appropriate given the evidence?
- Enable a supported streaming telemetry subscription and validate the model paths and collector delivery.
- Align EVPN route-target import policy and local tenant VRF configuration for the relevant VNI.
- Validate the VNI's BUM replication configuration and peer membership before changing unicast forwarding.
- Correct the L3 VNI and tenant VRF association and check EVPN route import/export on participating VTEPs.
Explanation
Correct Answer
D:Correct the L3 VNI and tenant VRF association and check EVPN route import/export on participating VTEPs. Integrated routing and bridging requires consistent L3 VNI and tenant routing context for inter-subnet forwarding. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence.
Incorrect Answers
A:Enable a supported streaming telemetry subscription and validate the model paths and collector delivery. This concerns streaming telemetry health, not evpn vni-to-vrf mapping.
B:Align EVPN route-target import policy and local tenant VRF configuration for the relevant VNI. This concerns mp-BGP tenant route import, not evpn vni-to-vrf mapping.
C:Validate the VNI's BUM replication configuration and peer membership before changing unicast forwarding. This concerns bum replication behavior, not evpn vni-to-vrf mapping.
Question 846
An operations platform polls hundreds of leaf switches too slowly to detect short control-plane events. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence. Which intervention most directly addresses the stated condition?
- Check the EVPN address family peering and route-type advertisements before altering the VXLAN data plane.
- Validate PIM adjacency and the consistent rendezvous-point mapping for the affected multicast group.
- Enable a supported streaming telemetry subscription and validate the model paths and collector delivery.
- Configure and validate an appropriate first-hop redundancy group with a shared virtual gateway and healthy tracking.
Explanation
Correct Answer
C:Enable a supported streaming telemetry subscription and validate the model paths and collector delivery. Model-driven telemetry can provide pushed state updates more frequently than coarse periodic polling. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence.
Incorrect Answers
A:Check the EVPN address family peering and route-type advertisements before altering the VXLAN data plane. This concerns mp-BGP evpn route learning, not streaming telemetry health.
B:Validate PIM adjacency and the consistent rendezvous-point mapping for the affected multicast group. This concerns PIM multicast rendezvous point, not streaming telemetry health.
D:Configure and validate an appropriate first-hop redundancy group with a shared virtual gateway and healthy tracking. This concerns first-hop gateway failover, not streaming telemetry health.
Question 847
A maintenance script needs to run on a fixed schedule but an engineer proposes an EEM syslog trigger instead. A scheduled deployment is pending, and the engineer must validate how the script handles this failure condition. Which evidence set most directly tests the suspected failure?
- Inspect EEM detector configuration, actual syslog message, applet history and action permissions.
- Inspect per-link utilization, queue congestion, flow distribution, host transport counters and workload phases.
- Inspect job definition, scheduler timetable, execution status and change-window policy.
- Inspect Guest Shell availability, mount mappings, file locations, network access and executed command output.
Explanation
Correct Answer
C:Inspect job definition, scheduler timetable, execution status and change-window policy. These records help distinguish the suspected failure from a superficially similar fault before modifying production. Scheduled tasks follow time-based execution rather than requiring a spontaneous syslog event to fire. A scheduled deployment is pending, and the engineer must validate how the script handles this failure condition.
Incorrect Answers
A:Inspect EEM detector configuration, actual syslog message, applet history and action permissions. This concerns eem syslog-triggered remediation, not nx-os scheduler jobs.
B:Inspect per-link utilization, queue congestion, flow distribution, host transport counters and workload phases. This concerns ai cluster network congestion, not nx-os scheduler jobs.
D:Inspect Guest Shell availability, mount mappings, file locations, network access and executed command output. This concerns guest shell isolation, not nx-os scheduler jobs.
Question 848
A service-profile template update adds a workload VLAN but newly associated blades cannot send tagged frames for that network. Operations is validating the host before approving production workload placement. What is the best next implementation or troubleshooting step?
- Reconcile firmware targets with the Cisco-supported hardware and software compatibility guidance before activation.
- Align the vNIC template VLAN membership and upstream VLAN allowance across the chosen fabric path.
- Separate the relevant MAC pool ranges and confirm all instantiated identities are unique before attachment.
- Validate that fabric A and fabric B interfaces have independent working uplinks and correctly bound vNICs.
Explanation
Correct Answer
B:Align the vNIC template VLAN membership and upstream VLAN allowance across the chosen fabric path. A vNIC may be configured for a VLAN that the fabric and upstream trunks still do not carry. Operations is validating the host before approving production workload placement.
Incorrect Answers
A:Reconcile firmware targets with the Cisco-supported hardware and software compatibility guidance before activation. This concerns UCS firmware compatibility, not UCS VLAN pool and template.
C:Separate the relevant MAC pool ranges and confirm all instantiated identities are unique before attachment. That response is associated with ucs mac pool uniqueness rather than the specific ucs vlan pool and template condition described here. For the stated failure, the preferred action is: Align the vNIC template VLAN membership and upstream VLAN allowance across the chosen fabric path. Relevant evidence: Inspect effective vNIC templates, VLAN object assignments, LAN uplink trunk allowances and fault logs. Operations is validating the host before approving production workload placement.
D:Validate that fabric A and fabric B interfaces have independent working uplinks and correctly bound vNICs. That response is associated with ucs fabric redundancy rather than the specific ucs vlan pool and template condition described here. For the stated failure, the preferred action is: Align the vNIC template VLAN membership and upstream VLAN allowance across the chosen fabric path. Relevant evidence: Inspect effective vNIC templates, VLAN object assignments, LAN uplink trunk allowances and fault logs. Operations is validating the host before approving production workload placement.
Question 849
A new Fibre Channel host is connected to an MDS switch but never receives a fabric identifier and cannot discover targets. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN. Which intervention most directly addresses the stated condition?
- Investigate Fibre Channel domain ID assignments and fabric merge requirements before allowing the ISL to join.
- Create and verify separate VSAN assignments for the teams' relevant FC interfaces and zonesets.
- Validate physical FC link and initiator FLOGI registration before changing storage-array masking.
- Align interface speed, VSAN mode and compatibility parameters across the intended port-channel members.
Explanation
Correct Answer
C:Validate physical FC link and initiator FLOGI registration before changing storage-array masking. An initiator must complete fabric login and receive an FCID before normal fabric services can identify it. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN.
Incorrect Answers
A:Investigate Fibre Channel domain ID assignments and fabric merge requirements before allowing the ISL to join. This concerns fcid and domain id stability, not fibre channel fabric login.
B:Create and verify separate VSAN assignments for the teams' relevant FC interfaces and zonesets. This concerns VSAN isolation, not fibre channel fabric login.
D:Align interface speed, VSAN mode and compatibility parameters across the intended port-channel members. This concerns fibre channel port-channel consistency, not fibre channel fabric login.
Question 850
An operator plans an EPLD firmware update during a business peak because a software patch earlier completed without traffic loss. The team is preparing a controlled production change and must preserve fabric reachability. Which controlled change is most appropriate given the evidence?
- Verify the VLAN pool, domain, AEP and interface policy group associations serving the endpoint port.
- Advertise and verify the VTEP source-loopback reachability in the underlay routing domain.
- Reconcile the VMM domain association, hypervisor inventory and EPG port-group mapping.
- Schedule EPLD maintenance using platform-specific impact guidance and verified redundancy coverage.
Explanation
Correct Answer
D:Schedule EPLD maintenance using platform-specific impact guidance and verified redundancy coverage. Programmable-logic updates can require component reset or reload even when an unrelated software patch did not. The team is preparing a controlled production change and must preserve fabric reachability.
Incorrect Answers
A:Verify the VLAN pool, domain, AEP and interface policy group associations serving the endpoint port. This concerns aci access policy chain, not epld firmware maintenance.
B:Advertise and verify the VTEP source-loopback reachability in the underlay routing domain. This concerns vxlan vtep underlay reachability, not epld firmware maintenance.
C:Reconcile the VMM domain association, hypervisor inventory and EPG port-group mapping. This concerns aci vmm association, not epld firmware maintenance.
Implementing and Operating Cisco Data Center Core Technologies (DCCOR) (350-601) Practice Tests