Question 640
A leaf learns EVPN prefixes from a neighbor but cannot install remote tenant routes because the received route targets are not imported. The team is preparing a controlled production change and must preserve fabric reachability. What is the strongest technical basis for the recommended action?
- VXLAN encapsulation depends on routable IP transport between VTEP endpoints before tenant traffic can traverse it.
- An FHRP keeps a virtual default gateway available while members transition between active and standby roles.
- PIM sparse mode relies on correct multicast routing state and, where applicable, an RP for shared-tree discovery.
- MP-BGP session establishment does not guarantee tenant routes will be imported when policy attributes mismatch.
Explanation
Correct Answer
D:MP-BGP session establishment does not guarantee tenant routes will be imported when policy attributes mismatch. The team is preparing a controlled production change and must preserve fabric reachability.
Incorrect Answers
A:VXLAN encapsulation depends on routable IP transport between VTEP endpoints before tenant traffic can traverse it. This concerns vxlan vtep underlay reachability, not mp-BGP tenant route import.
B:An FHRP keeps a virtual default gateway available while members transition between active and standby roles. This concerns first-hop gateway failover, not mp-BGP tenant route import.
C:PIM sparse mode relies on correct multicast routing state and, where applicable, an RP for shared-tree discovery. This concerns PIM multicast rendezvous point, not mp-BGP tenant route import.
Question 641
A blade's vHBA is configured but the upstream SAN fabric never sees its WWPN login. The issue reappears on a second managed host, so the team is checking its effective profiles and hardware state. What should the engineer collect before ruling out other causes?
- Inspect vNIC QoS policies, DCB settings if applicable, interface queue drops and upstream class maps.
- Inspect vHBA identity, SAN uplink operational state, VSAN mapping and upstream FLOGI entries.
- Inspect WWPN pool reservations, active vHBA identities, fabric login records and zoning references.
- Inspect adapter health, fault codes, service-profile inventory, event chronology and firmware state.
Explanation
Correct Answer
B:Inspect vHBA identity, SAN uplink operational state, VSAN mapping and upstream FLOGI entries. These records help distinguish the suspected failure from a superficially similar fault before modifying production. A blade vHBA needs an operational fabric path and correct VSAN association before a fabric login can occur. The issue reappears on a second managed host, so the team is checking its effective profiles and hardware state.
Incorrect Answers
A:Inspect vNIC QoS policies, DCB settings if applicable, interface queue drops and upstream class maps. This concerns UCS network qos policy, not SAN connectivity from blade chassis.
C:Inspect WWPN pool reservations, active vHBA identities, fabric login records and zoning references. This concerns wwpn pool allocation, not SAN connectivity from blade chassis.
D:Inspect adapter health, fault codes, service-profile inventory, event chronology and firmware state. This concerns intersight alert triage, not SAN connectivity from blade chassis.
Question 642
A compromised endpoint sends frames with another host's IP address on the same access VLAN after DHCP snooping is enabled. Security engineering must restore the approved service without relaxing unrelated protection. Which result would best confirm that the remediation worked?
- Clients obtain leases from the authorized server and rogue DHCP replies on access ports are still rejected.
- The adjacency remains Full across the rollover while old credentials are retired after verification.
- Spoofed source addresses are dropped while approved host traffic continues normally.
- The link carries encrypted authenticated traffic and rejects frames without valid link security associations.
Explanation
Correct Answer
C:Spoofed source addresses are dropped while approved host traffic continues normally. This result tests the original failure rather than reporting merely that the configuration command was accepted. IP source validation uses trusted bindings to prevent endpoints from impersonating unassigned source addresses. Security engineering must restore the approved service without relaxing unrelated protection.
Incorrect Answers
A:Clients obtain leases from the authorized server and rogue DHCP replies on access ports are still rejected. That response is associated with dhcp snooping trusted uplink rather than the specific first-hop ip/mac spoof defense condition described here. For the stated failure, the preferred action is: Enforce an appropriate source-binding validation feature consistent with the recorded DHCP or static bindings. Relevant evidence: Inspect source guard state, DHCP snooping bindings, static exceptions and ingress drop reasons. Security engineering must restore the approved service without relaxing unrelated protection.
B:The adjacency remains Full across the rollover while old credentials are retired after verification. That response is associated with routing protocol keychain rollover rather than the specific first-hop ip/mac spoof defense condition described here. For the stated failure, the preferred action is: Enforce an appropriate source-binding validation feature consistent with the recorded DHCP or static bindings. Relevant evidence: Inspect source guard state, DHCP snooping bindings, static exceptions and ingress drop reasons. Security engineering must restore the approved service without relaxing unrelated protection.
D:The link carries encrypted authenticated traffic and rejects frames without valid link security associations. This concerns MACsec protection scope, not first-hop ip/mac spoof defense.
Question 643
A new MDS FC port channel comes up with only one member while the remaining ports are suspended. A storage change board requires a traceable diagnosis before allowing further fabric changes. Which evidence set most directly tests the suspected failure?
- Inspect active zone members, initiator WWPNs, target WWPNs and intended host-to-LUN access matrices.
- Inspect fcdomain status, assigned domain IDs, ISL events and active FCID allocations.
- Inspect FC interface state, FLOGI database, initiator WWPN and relevant switch events.
- Inspect SAN port-channel summary, member compatibility results, link speeds and VSAN assignments.
Explanation
Correct Answer
D:Inspect SAN port-channel summary, member compatibility results, link speeds and VSAN assignments. These records help distinguish the suspected failure from a superficially similar fault before modifying production. Fibre Channel port channels bundle compatible physical links; inconsistent member configuration can suspend interfaces. A storage change board requires a traceable diagnosis before allowing further fabric changes.
Incorrect Answers
A:Inspect active zone members, initiator WWPNs, target WWPNs and intended host-to-LUN access matrices. This concerns single-initiator zoning, not fibre channel port-channel consistency.
B:Inspect fcdomain status, assigned domain IDs, ISL events and active FCID allocations. That response is associated with fcid and domain id stability rather than the specific fibre channel port-channel consistency condition described here. For the stated failure, the preferred action is: Align interface speed, VSAN mode and compatibility parameters across the intended port-channel members. Relevant evidence: Inspect SAN port-channel summary, member compatibility results, link speeds and VSAN assignments. A storage change board requires a traceable diagnosis before allowing further fabric changes.
C:Inspect FC interface state, FLOGI database, initiator WWPN and relevant switch events. That response is associated with fibre channel fabric login rather than the specific fibre channel port-channel consistency condition described here. For the stated failure, the preferred action is: Align interface speed, VSAN mode and compatibility parameters across the intended port-channel members. Relevant evidence: Inspect SAN port-channel summary, member compatibility results, link speeds and VSAN assignments. A storage change board requires a traceable diagnosis before allowing further fabric changes.
Question 644
A design team labels a private on-premises cloud and a separately operated public cloud as one private deployment even though workloads move between them. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence. Why is the targeted engineering response justified in this situation?
- OSPF neighbors must agree on the area and relevant adjacency parameters to reach Full state and exchange routes correctly.
- With peer-link failure and a reachable peer, the secondary suspends vPC member ports to prevent loops and dual-active forwarding.
- Fabric assurance tools combine topology and operational observations but require data correlation to identify service causes.
- Hybrid cloud combines distinct cloud infrastructures linked to support data and application portability.
Explanation
Correct Answer
D:Hybrid cloud combines distinct cloud infrastructures linked to support data and application portability. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence.
Incorrect Answers
A:OSPF neighbors must agree on the area and relevant adjacency parameters to reach Full state and exchange routes correctly. This concerns OSPF area compatibility, not hybrid cloud model classification.
B:With peer-link failure and a reachable peer, the secondary suspends vPC member ports to prevent loops and dual-active forwarding. This concerns vpc peer-link recovery, not hybrid cloud model classification.
C:Fabric assurance tools combine topology and operational observations but require data correlation to identify service causes. This concerns nexus dashboard fabric visibility, not hybrid cloud model classification.
Question 645
An API workflow creates an Intersight server profile but fails because referenced policy objects belong to another inaccessible organization. The automation change must pass a preproduction test and leave a verifiable audit trail. What is the best next implementation or troubleshooting step?
- Constrain automation targets using verified site identity and a preflight plan before bulk deployment.
- Verify organization scope and referenced policy identifiers before retrying the profile creation.
- Reconcile the approved desired configuration and actual state using plan review and controlled state management.
- Move secrets to a supported secure secret store and scope the automation identity to required API permissions.
Explanation
Correct Answer
B:Verify organization scope and referenced policy identifiers before retrying the profile creation. Intersight objects and their assignments must satisfy resource visibility and scope permissions. The automation change must pass a preproduction test and leave a verifiable audit trail.
Incorrect Answers
A:Constrain automation targets using verified site identity and a preflight plan before bulk deployment. This concerns nexus dashboard automation scope, not intersight policy automation.
C:Reconcile the approved desired configuration and actual state using plan review and controlled state management. That response is associated with terraform plan and state rather than the specific intersight policy automation condition described here. For the stated failure, the preferred action is: Verify organization scope and referenced policy identifiers before retrying the profile creation. Relevant evidence: Inspect API error details, object Moids, organization membership and profile policy references. The automation change must pass a preproduction test and leave a verifiable audit trail.
D:Move secrets to a supported secure secret store and scope the automation identity to required API permissions. That response is associated with powershell api token security rather than the specific intersight policy automation condition described here. For the stated failure, the preferred action is: Verify organization scope and referenced policy identifiers before retrying the profile creation. Relevant evidence: Inspect API error details, object Moids, organization membership and profile policy references. The automation change must pass a preproduction test and leave a verifiable audit trail.
Question 646
A storage host loses path visibility after a target port migration although the physical target link is healthy. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN. Which test result best demonstrates restoration of the intended behavior?
- The correct current target WWPN appears in FCNS and the authorized initiator discovers it.
- The documented update completes within its approved impact envelope and host paths remain correctly redundant.
- The alias resolves to the correct active target identity and the host's allowed storage paths work.
- The correct active zone now includes the initiator and target, and storage discovery succeeds.
Explanation
Correct Answer
A:The correct current target WWPN appears in FCNS and the authorized initiator discovers it. This result tests the original failure rather than reporting merely that the configuration command was accepted. The fabric name server reflects registered port identities and can reveal whether the expected target is visible. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN.
Incorrect Answers
B:The documented update completes within its approved impact envelope and host paths remain correctly redundant. This concerns mds nondisruptive upgrade planning, not fibre channel name-server entries.
C:The alias resolves to the correct active target identity and the host's allowed storage paths work. This concerns device alias maintenance, not fibre channel name-server entries.
D:The correct active zone now includes the initiator and target, and storage discovery succeeds. This concerns zoneset activation state, not fibre channel name-server entries.
Question 647
An API workflow creates an Intersight server profile but fails because referenced policy objects belong to another inaccessible organization. The automation change must pass a preproduction test and leave a verifiable audit trail. What is the strongest technical basis for the recommended action?
- Terraform compares declared infrastructure with observed resources and can undo unmanaged changes during apply.
- Embedded Event Manager runs configured actions in response to matching local events and authorization constraints.
- Credential protection and least privilege reduce the impact of source-code disclosure.
- Intersight objects and their assignments must satisfy resource visibility and scope permissions.
Explanation
Correct Answer
D:Intersight objects and their assignments must satisfy resource visibility and scope permissions. The automation change must pass a preproduction test and leave a verifiable audit trail.
Incorrect Answers
A:Terraform compares declared infrastructure with observed resources and can undo unmanaged changes during apply. That response is associated with terraform plan and state rather than the specific intersight policy automation condition described here. For the stated failure, the preferred action is: Verify organization scope and referenced policy identifiers before retrying the profile creation. Relevant evidence: Inspect API error details, object Moids, organization membership and profile policy references. The automation change must pass a preproduction test and leave a verifiable audit trail.
B:Embedded Event Manager runs configured actions in response to matching local events and authorization constraints. This concerns eem syslog-triggered remediation, not intersight policy automation.
C:Credential protection and least privilege reduce the impact of source-code disclosure. That response is associated with powershell api token security rather than the specific intersight policy automation condition described here. For the stated failure, the preferred action is: Verify organization scope and referenced policy identifiers before retrying the profile creation. Relevant evidence: Inspect API error details, object Moids, organization membership and profile policy references. The automation change must pass a preproduction test and leave a verifiable audit trail.
Question 648
A service-profile template update adds a workload VLAN but newly associated blades cannot send tagged frames for that network. Operations is validating the host before approving production workload placement. Which limitation prevents the team from overgeneralizing this result?
- Adding a VLAN only to the upstream switch does not attach it automatically to the UCS vNIC template.
- Changing the displayed server name does not resolve a duplicate effective network identifier.
- Suppressing an alert does not remove the underlying component fault or its availability risk.
- Two vNIC objects on the same failed upstream path do not provide true physical redundancy.
Explanation
Correct Answer
A:Adding a VLAN only to the upstream switch does not attach it automatically to the UCS vNIC template. A vNIC may be configured for a VLAN that the fabric and upstream trunks still do not carry. Operations is validating the host before approving production workload placement.
Incorrect Answers
B:Changing the displayed server name does not resolve a duplicate effective network identifier. That response is associated with ucs mac pool uniqueness rather than the specific ucs vlan pool and template condition described here. For the stated failure, the preferred action is: Align the vNIC template VLAN membership and upstream VLAN allowance across the chosen fabric path. Relevant evidence: Inspect effective vNIC templates, VLAN object assignments, LAN uplink trunk allowances and fault logs. Operations is validating the host before approving production workload placement.
C:Suppressing an alert does not remove the underlying component fault or its availability risk. This concerns intersight alert triage, not UCS VLAN pool and template.
D:Two vNIC objects on the same failed upstream path do not provide true physical redundancy. That response is associated with ucs fabric redundancy rather than the specific ucs vlan pool and template condition described here. For the stated failure, the preferred action is: Align the vNIC template VLAN membership and upstream VLAN allowance across the chosen fabric path. Relevant evidence: Inspect effective vNIC templates, VLAN object assignments, LAN uplink trunk allowances and fault logs. Operations is validating the host before approving production workload placement.
Question 649
Storage latency rises whenever a particular MDS uplink is busy, and CRC errors increase on that same port. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN. Which test result best demonstrates restoration of the intended behavior?
- Error counters stop increasing after the physical fix and application storage latency improves.
- The correct active zone now includes the initiator and target, and storage discovery succeeds.
- The correct current target WWPN appears in FCNS and the authorized initiator discovers it.
- Only authorized initiators see their allowed storage targets, with unrelated hosts excluded.
Explanation
Correct Answer
A:Error counters stop increasing after the physical fix and application storage latency improves. This result tests the original failure rather than reporting merely that the configuration command was accepted. CRC and link-level errors can indicate transport impairment rather than a storage-array performance limitation. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN.
Incorrect Answers
B:The correct active zone now includes the initiator and target, and storage discovery succeeds. This concerns zoneset activation state, not SAN port error telemetry.
C:The correct current target WWPN appears in FCNS and the authorized initiator discovers it. This concerns fibre channel name-server entries, not SAN port error telemetry.
D:Only authorized initiators see their allowed storage targets, with unrelated hosts excluded. This concerns single-initiator zoning, not SAN port error telemetry.
Question 650
A replacement ACI leaf remains undiscovered after connecting to the spine and giving it management power. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence. Which explanation most directly accounts for the required correction?
- ACI VMM integration maps VM networks and EPGs through the virtualized domain to appropriate fabric policy.
- ACI access policies rely on a consistent domain and attachment chain before deploying the correct encapsulation.
- VXLAN encapsulation depends on routable IP transport between VTEP endpoints before tenant traffic can traverse it.
- An ACI fabric must discover and register infrastructure nodes before normal tenant policy deployment.
Explanation
Correct Answer
D:An ACI fabric must discover and register infrastructure nodes before normal tenant policy deployment. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence.
Incorrect Answers
A:ACI VMM integration maps VM networks and EPGs through the virtualized domain to appropriate fabric policy. This concerns aci vmm association, not aci fabric discovery.
B:ACI access policies rely on a consistent domain and attachment chain before deploying the correct encapsulation. This concerns aci access policy chain, not aci fabric discovery.
C:VXLAN encapsulation depends on routable IP transport between VTEP endpoints before tenant traffic can traverse it. This concerns vxlan vtep underlay reachability, not aci fabric discovery.
Implementing and Operating Cisco Data Center Core Technologies (DCCOR) (350-601) Practice Tests