Pass Your Cisco 350-601 Exam Easy!

Cisco 350-601 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

350-601 Premium Bundle

$74.99

Cisco 350-601 Premium Bundle

350-601 Premium File: 630 Questions & Answers

Last Update: Nov 17, 2026

350-601 Training Course: 143 Video Lectures

350-601 Bundle gives you unlimited access to "350-601" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
Cisco 350-601 Premium Bundle
Cisco 350-601 Premium Bundle

350-601 Premium File: 630 Questions & Answers

Last Update: Nov 17, 2026

350-601 Training Course: 143 Video Lectures

$74.99

350-601 Bundle gives you unlimited access to "350-601" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

Cisco 350-601 Practice Test 46

Question 450

Two switches exchange frames over an untrusted fiber run, and security requirements call for link-layer encryption. A follow-up access review asks the team to validate the same boundary with a controlled negative test. Which result would best confirm that the remediation worked?

  1. Spoofed source addresses are dropped while approved host traffic continues normally.
  2. The adjacency remains Full across the rollover while old credentials are retired after verification.
  3. The link carries encrypted authenticated traffic and rejects frames without valid link security associations.
  4. Clients obtain leases from the authorized server and rogue DHCP replies on access ports are still rejected.

Explanation

Correct Answer

C:

The link carries encrypted authenticated traffic and rejects frames without valid link security associations. This result tests the original failure rather than reporting merely that the configuration command was accepted. MACsec protects frames on a supported Ethernet link using negotiated encryption and integrity mechanisms. A follow-up access review asks the team to validate the same boundary with a controlled negative test.

Incorrect Answers

A:

Spoofed source addresses are dropped while approved host traffic continues normally. This concerns first-hop ip/mac spoof defense, not MACsec protection scope.

B:

The adjacency remains Full across the rollover while old credentials are retired after verification. This concerns routing protocol keychain rollover, not MACsec protection scope.

D:

Clients obtain leases from the authorized server and rogue DHCP replies on access ports are still rejected. This concerns DHCP snooping trusted uplink, not MACsec protection scope.

Question 451

An MDS operator edits the configured zoneset but a host still cannot discover the newly authorized storage target. A storage change board requires a traceable diagnosis before allowing further fabric changes. Which limitation prevents the team from overgeneralizing this result?

  1. Saving a zoneset definition alone does not establish that it is the enforced active zoning policy.
  2. An old name-server entry for the former target port does not prove the replacement path is live.
  3. A permissive zone may increase unintended device visibility even when array LUN masking also exists.
  4. Successful ICMP ping does not establish that iSCSI discovery or target authorization is working.

Explanation

Correct Answer

A:

Saving a zoneset definition alone does not establish that it is the enforced active zoning policy. Configured zones and active enforced zoning can differ until the appropriate zoneset is activated. A storage change board requires a traceable diagnosis before allowing further fabric changes.

Incorrect Answers

B:

An old name-server entry for the former target port does not prove the replacement path is live. That response is associated with fibre channel name-server entries rather than the specific zoneset activation state condition described here. For the stated failure, the preferred action is: Activate the intended zoneset on the correct VSAN and validate its active membership. Relevant evidence: Inspect active zoneset, configured zoneset, VSAN ID and activation history. A storage change board requires a traceable diagnosis before allowing further fabric changes.

C:

A permissive zone may increase unintended device visibility even when array LUN masking also exists. That response is associated with single-initiator zoning rather than the specific zoneset activation state condition described here. For the stated failure, the preferred action is: Activate the intended zoneset on the correct VSAN and validate its active membership. Relevant evidence: Inspect active zoneset, configured zoneset, VSAN ID and activation history. A storage change board requires a traceable diagnosis before allowing further fabric changes.

D:

Successful ICMP ping does not establish that iSCSI discovery or target authorization is working. This concerns iscsi target discovery, not zoneset activation state.

Question 452

An on-box NX-OS Python maintenance script interprets a missing interface counter as zero and incorrectly reports healthy operation. A scheduled deployment is pending, and the engineer must validate how the script handles this failure condition. How should the implementation be validated against the original failure?

  1. The utility reads the intended local input under the approved Guest Shell permissions and completes the task.
  2. The authorized client runs the intended read-only API call and receives the expected structured result.
  3. A simulated timeout followed by retry yields one intended resource and a documented final state.
  4. Tests with absent fields return an explicit unknown/error outcome rather than a fabricated healthy metric.

Explanation

Correct Answer

D:

Tests with absent fields return an explicit unknown/error outcome rather than a fabricated healthy metric. This result tests the original failure rather than reporting merely that the configuration command was accepted. Automation must distinguish unavailable telemetry from a real numeric zero to avoid false success reports. A scheduled deployment is pending, and the engineer must validate how the script handles this failure condition.

Incorrect Answers

A:

The utility reads the intended local input under the approved Guest Shell permissions and completes the task. This concerns guest shell isolation, not on-box python exception handling.

B:

The authorized client runs the intended read-only API call and receives the expected structured result. This concerns nx-api request authorization, not on-box python exception handling.

C:

A simulated timeout followed by retry yields one intended resource and a documented final state. This concerns rest api retries and idempotence, not on-box python exception handling.

Question 453

A blade's vNIC sees intermittent retransmissions after a QoS change, but ordinary UCS counters lack per-packet context. The issue reappears on a second managed host, so the team is checking its effective profiles and hardware state. Which test result best demonstrates restoration of the intended behavior?

  1. The affected adapter fault clears after a supported fix and workload connectivity validates correctly.
  2. Applied firmware aligns with approved compatibility targets and the host remains healthy after validation.
  3. A controlled capture identifies whether retransmissions coincide with drops or network reordering.
  4. Hardware environmental faults are resolved and sustained compute tests no longer show thermal throttling.

Explanation

Correct Answer

C:

A controlled capture identifies whether retransmissions coincide with drops or network reordering. This result tests the original failure rather than reporting merely that the configuration command was accepted. Packet replication can reveal TCP and frame-level behavior that interface counters summarize only coarsely. The issue reappears on a second managed host, so the team is checking its effective profiles and hardware state.

Incorrect Answers

A:

The affected adapter fault clears after a supported fix and workload connectivity validates correctly. This concerns intersight alert triage, not compute traffic span.

B:

Applied firmware aligns with approved compatibility targets and the host remains healthy after validation. This concerns UCS firmware compatibility, not compute traffic span.

D:

Hardware environmental faults are resolved and sustained compute tests no longer show thermal throttling. This concerns chassis power and thermal monitoring, not compute traffic span.

Question 454

Storage latency rises whenever a particular MDS uplink is busy, and CRC errors increase on that same port. A storage change board requires a traceable diagnosis before allowing further fabric changes. What should the engineer do first to address the observed failure?

  1. Run supported upgrade-path and feature-impact checks with a validated rollback plan before starting the update.
  2. Investigate the physical FC link and its error counters before changing storage service QoS.
  3. Determine EPLD component impact and isolate maintenance to a window with healthy alternate fabric paths.
  4. Correlate SAN-specific health and interface telemetry in supported Nexus Dashboard or MDS monitoring tools.

Explanation

Correct Answer

B:

Investigate the physical FC link and its error counters before changing storage service QoS. CRC and link-level errors can indicate transport impairment rather than a storage-array performance limitation. A storage change board requires a traceable diagnosis before allowing further fabric changes.

Incorrect Answers

A:

Run supported upgrade-path and feature-impact checks with a validated rollback plan before starting the update. This concerns mds nondisruptive upgrade planning, not SAN port error telemetry.

C:

Determine EPLD component impact and isolate maintenance to a window with healthy alternate fabric paths. This concerns mds epld update impact, not SAN port error telemetry.

D:

Correlate SAN-specific health and interface telemetry in supported Nexus Dashboard or MDS monitoring tools. This concerns nexus dashboard SAN monitoring, not SAN port error telemetry.

Question 455

A server access network contains a deliberate redundant Layer 2 path, and one uplink is discarding frames under RSTP. The team is preparing a controlled production change and must preserve fabric reachability. What is the strongest technical basis for the recommended action?

  1. With peer-link failure and a reachable peer, the secondary suspends vPC member ports to prevent loops and dual-active forwarding.
  2. RSTP prevents Layer 2 loops by assigning port roles and discarding redundant paths when necessary.
  3. LACP aggregates only compatible interfaces, and inconsistent operational settings can suspend members.
  4. OSPF neighbors must agree on the area and relevant adjacency parameters to reach Full state and exchange routes correctly.

Explanation

Correct Answer

B:

RSTP prevents Layer 2 loops by assigning port roles and discarding redundant paths when necessary. The team is preparing a controlled production change and must preserve fabric reachability.

Incorrect Answers

A:

With peer-link failure and a reachable peer, the secondary suspends vPC member ports to prevent loops and dual-active forwarding. That response is associated with vpc peer-link recovery rather than the specific rstp blocked uplink condition described here. For the stated failure, the preferred action is: Confirm the designated root and spanning-tree role before changing a port that is intentionally blocking a loop. Relevant evidence: Inspect root bridge identity, port role, path cost and topology-change counters. The team is preparing a controlled production change and must preserve fabric reachability.

C:

LACP aggregates only compatible interfaces, and inconsistent operational settings can suspend members. That response is associated with lacp member mismatch rather than the specific rstp blocked uplink condition described here. For the stated failure, the preferred action is: Confirm the designated root and spanning-tree role before changing a port that is intentionally blocking a loop. Relevant evidence: Inspect root bridge identity, port role, path cost and topology-change counters. The team is preparing a controlled production change and must preserve fabric reachability.

D:

OSPF neighbors must agree on the area and relevant adjacency parameters to reach Full state and exchange routes correctly. This concerns OSPF area compatibility, not rstp blocked uplink.

Question 456

A new VXLAN leaf advertises local VNIs but tunnels to another leaf fail because the VTEP source loopback is missing from underlay routing. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence. What is the strongest technical basis for the recommended action?

  1. VXLAN encapsulation depends on routable IP transport between VTEP endpoints before tenant traffic can traverse it.
  2. Programmable-logic updates can require component reset or reload even when an unrelated software patch did not.
  3. Configuration management detects and remediates unauthorized deviations rather than trusting the most recent device state.
  4. Nondisruptive software upgrade support is platform, topology and image-path dependent and must be verified.

Explanation

Correct Answer

A:

VXLAN encapsulation depends on routable IP transport between VTEP endpoints before tenant traffic can traverse it. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence.

Incorrect Answers

B:

Programmable-logic updates can require component reset or reload even when an unrelated software patch did not. This concerns epld firmware maintenance, not vxlan vtep underlay reachability.

C:

Configuration management detects and remediates unauthorized deviations rather than trusting the most recent device state. This concerns fabric configuration drift, not vxlan vtep underlay reachability.

D:

Nondisruptive software upgrade support is platform, topology and image-path dependent and must be verified. This concerns nexus issu eligibility, not vxlan vtep underlay reachability.

Question 457

A server access network contains a deliberate redundant Layer 2 path, and one uplink is discarding frames under RSTP. The team is preparing a controlled production change and must preserve fabric reachability. What information should be inspected before the change is applied?

  1. Inspect loopback addresses, underlay routes, tunnel source settings and VTEP reachability.
  2. Inspect root bridge identity, port role, path cost and topology-change counters.
  3. Inspect peer-link state, peer-keepalive reachability, consistency checks and suspended port reasons.
  4. Inspect port-channel summaries, actor/partner keys, VLAN and speed settings and member suspension reasons.

Explanation

Correct Answer

B:

Inspect root bridge identity, port role, path cost and topology-change counters. These records help distinguish the suspected failure from a superficially similar fault before modifying production. RSTP prevents Layer 2 loops by assigning port roles and discarding redundant paths when necessary. The team is preparing a controlled production change and must preserve fabric reachability.

Incorrect Answers

A:

Inspect loopback addresses, underlay routes, tunnel source settings and VTEP reachability. This concerns vxlan vtep underlay reachability, not rstp blocked uplink.

C:

Inspect peer-link state, peer-keepalive reachability, consistency checks and suspended port reasons. That response is associated with vpc peer-link recovery rather than the specific rstp blocked uplink condition described here. For the stated failure, the preferred action is: Confirm the designated root and spanning-tree role before changing a port that is intentionally blocking a loop. Relevant evidence: Inspect root bridge identity, port role, path cost and topology-change counters. The team is preparing a controlled production change and must preserve fabric reachability.

D:

Inspect port-channel summaries, actor/partner keys, VLAN and speed settings and member suspension reasons. That response is associated with lacp member mismatch rather than the specific rstp blocked uplink condition described here. For the stated failure, the preferred action is: Confirm the designated root and spanning-tree role before changing a port that is intentionally blocking a loop. Relevant evidence: Inspect root bridge identity, port role, path cost and topology-change counters. The team is preparing a controlled production change and must preserve fabric reachability.

Question 458

A SAN array replaces a target HBA but operators try to keep its old WWPN hidden behind the same device alias without verification. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN. What post-change observation gives the strongest evidence of success?

  1. A test fault creates a correctly correlated alert and the affected path recovers without unauthorized zone changes.
  2. The correct current target WWPN appears in FCNS and the authorized initiator discovers it.
  3. Each authorized server vHBA appears logged in on the upstream fabric and discovers expected targets.
  4. The alias resolves to the correct active target identity and the host's allowed storage paths work.

Explanation

Correct Answer

D:

The alias resolves to the correct active target identity and the host's allowed storage paths work. This result tests the original failure rather than reporting merely that the configuration command was accepted. Device aliases map readable names to FC identifiers and must follow actual hardware identity changes. During the next path-failover exercise, the SAN team must confirm the same dependency on the affected VSAN.

Incorrect Answers

A:

A test fault creates a correctly correlated alert and the affected path recovers without unauthorized zone changes. This concerns nexus dashboard SAN monitoring, not device alias maintenance.

B:

The correct current target WWPN appears in FCNS and the authorized initiator discovers it. This concerns fibre channel name-server entries, not device alias maintenance.

C:

Each authorized server vHBA appears logged in on the upstream fabric and discovers expected targets. This concerns npv uplink fabric services, not device alias maintenance.

Question 459

A new VXLAN leaf advertises local VNIs but tunnels to another leaf fail because the VTEP source loopback is missing from underlay routing. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence. What is the best next implementation or troubleshooting step?

  1. Check the EVPN address family peering and route-type advertisements before altering the VXLAN data plane.
  2. Configure and validate an appropriate first-hop redundancy group with a shared virtual gateway and healthy tracking.
  3. Advertise and verify the VTEP source-loopback reachability in the underlay routing domain.
  4. Validate PIM adjacency and the consistent rendezvous-point mapping for the affected multicast group.

Explanation

Correct Answer

C:

Advertise and verify the VTEP source-loopback reachability in the underlay routing domain. VXLAN encapsulation depends on routable IP transport between VTEP endpoints before tenant traffic can traverse it. A second maintenance window is approaching, and the engineer must confirm the same failure mode using current device evidence.

Incorrect Answers

A:

Check the EVPN address family peering and route-type advertisements before altering the VXLAN data plane. This concerns mp-BGP evpn route learning, not vxlan vtep underlay reachability.

B:

Configure and validate an appropriate first-hop redundancy group with a shared virtual gateway and healthy tracking. This concerns first-hop gateway failover, not vxlan vtep underlay reachability.

D:

Validate PIM adjacency and the consistent rendezvous-point mapping for the affected multicast group. This concerns PIM multicast rendezvous point, not vxlan vtep underlay reachability.

Question 460

A four-link server port-channel forwards on two members because the other members use incompatible trunk settings. The team is preparing a controlled production change and must preserve fabric reachability. Why is the targeted engineering response justified in this situation?

  1. PIM sparse mode relies on correct multicast routing state and, where applicable, an RP for shared-tree discovery.
  2. RSTP prevents Layer 2 loops by assigning port roles and discarding redundant paths when necessary.
  3. With peer-link failure and a reachable peer, the secondary suspends vPC member ports to prevent loops and dual-active forwarding.
  4. LACP aggregates only compatible interfaces, and inconsistent operational settings can suspend members.

Explanation

Correct Answer

D:

LACP aggregates only compatible interfaces, and inconsistent operational settings can suspend members. The team is preparing a controlled production change and must preserve fabric reachability.

Incorrect Answers

A:

PIM sparse mode relies on correct multicast routing state and, where applicable, an RP for shared-tree discovery. This concerns PIM multicast rendezvous point, not lacp member mismatch.

B:

RSTP prevents Layer 2 loops by assigning port roles and discarding redundant paths when necessary. That response is associated with rstp blocked uplink rather than the specific lacp member mismatch condition described here. For the stated failure, the preferred action is: Align the switchport and LACP parameters across members before attempting to force them into the bundle. Relevant evidence: Inspect port-channel summaries, actor/partner keys, VLAN and speed settings and member suspension reasons. The team is preparing a controlled production change and must preserve fabric reachability.

C:

With peer-link failure and a reachable peer, the secondary suspends vPC member ports to prevent loops and dual-active forwarding. That response is associated with vpc peer-link recovery rather than the specific lacp member mismatch condition described here. For the stated failure, the preferred action is: Align the switchport and LACP parameters across members before attempting to force them into the bundle. Relevant evidence: Inspect port-channel summaries, actor/partner keys, VLAN and speed settings and member suspension reasons. The team is preparing a controlled production change and must preserve fabric reachability.


Implementing and Operating Cisco Data Center Core Technologies (DCCOR) (350-601) Practice Tests

Purchase Individually

350-601 Premium File

Premium File
350-601 Premium File
630 Q&A
$76.99$69.99

350-601 Training Video Course

Training Course
350-601 Training Video Course
143 Lectures
$27.49$24.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.