Pass Your Cisco 350-601 Exam Easy!

Cisco 350-601 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

350-601 Premium Bundle

$74.99

Cisco 350-601 Premium Bundle

350-601 Premium File: 630 Questions & Answers

Last Update: Nov 17, 2026

350-601 Training Course: 143 Video Lectures

350-601 Bundle gives you unlimited access to "350-601" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
Cisco 350-601 Premium Bundle
Cisco 350-601 Premium Bundle

350-601 Premium File: 630 Questions & Answers

Last Update: Nov 17, 2026

350-601 Training Course: 143 Video Lectures

$74.99

350-601 Bundle gives you unlimited access to "350-601" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

Cisco 350-601 Practice Test 18

Question 170

An engineer plans simultaneous firmware activation on every blade supporting a critical cluster with no evacuation plan. Operations is validating the host before approving production workload placement. Which result would best confirm that the remediation worked?

  1. Each upgraded host returns healthy while the cluster continues meeting its availability objectives.
  2. Every active vNIC has a unique assigned MAC and upstream learning stays stable after deployment.
  3. The expected WWPN performs fabric login on the correct VSAN and sees authorized storage paths.
  4. The intended traffic class meets its latency and drop requirements under a controlled mixed-load test.

Explanation

Correct Answer

A:

Each upgraded host returns healthy while the cluster continues meeting its availability objectives. This result tests the original failure rather than reporting merely that the configuration command was accepted. Rolling hardware maintenance reduces service disruption only if dependent workloads can tolerate sequential host removal. Operations is validating the host before approving production workload placement.

Incorrect Answers

B:

Every active vNIC has a unique assigned MAC and upstream learning stays stable after deployment. This concerns UCS mac pool uniqueness, not UCS firmware change sequencing.

C:

The expected WWPN performs fabric login on the correct VSAN and sees authorized storage paths. This concerns SAN connectivity from blade chassis, not UCS firmware change sequencing.

D:

The intended traffic class meets its latency and drop requirements under a controlled mixed-load test. This concerns UCS network qos policy, not UCS firmware change sequencing.

Question 171

A UCS blade shows unexplained throttling during compute peaks despite normal guest operating-system logs. Operations is validating the host before approving production workload placement. Which intervention most directly addresses the stated condition?

  1. Configure an authorized traffic mirror or supported capture point to observe the affected vNIC path.
  2. Correlate the adapter's hardware fault and affected chassis events before modifying host compute policy.
  3. Restore the intended production boot-device order and detach temporary install media from the active policy.
  4. Inspect chassis power, fan and thermal faults before changing application performance settings.

Explanation

Correct Answer

D:

Inspect chassis power, fan and thermal faults before changing application performance settings. Physical power or cooling constraints can throttle compute even when guest metrics show no software error. Operations is validating the host before approving production workload placement.

Incorrect Answers

A:

Configure an authorized traffic mirror or supported capture point to observe the affected vNIC path. That response is associated with compute traffic span rather than the specific chassis power and thermal monitoring condition described here. For the stated failure, the preferred action is: Inspect chassis power, fan and thermal faults before changing application performance settings. Relevant evidence: Inspect chassis health, power budgets, fan alarms, temperature sensors and affected blade performance. Operations is validating the host before approving production workload placement.

B:

Correlate the adapter's hardware fault and affected chassis events before modifying host compute policy. That response is associated with intersight alert triage rather than the specific chassis power and thermal monitoring condition described here. For the stated failure, the preferred action is: Inspect chassis power, fan and thermal faults before changing application performance settings. Relevant evidence: Inspect chassis health, power budgets, fan alarms, temperature sensors and affected blade performance. Operations is validating the host before approving production workload placement.

C:

Restore the intended production boot-device order and detach temporary install media from the active policy. This concerns boot order and removable media, not chassis power and thermal monitoring.

Question 172

A Nexus access VLAN with Dynamic ARP Inspection enabled begins dropping legitimate hosts that use static addressing. Security engineering must restore the approved service without relaxing unrelated protection. Which technical principle best explains the recommended response?

  1. DAI verifies ARP bindings using trusted information and may reject legitimate fixed-address hosts without an authorized binding.
  2. Intersight RBAC and organizational scoping define which managed resources an operator may control.
  3. Microsegmentation can classify subsets of endpoints beyond broad subnet grouping and apply finer-grained controls.
  4. DHCP snooping should accept DHCP server responses from trusted paths while suppressing rogue access-port servers.

Explanation

Correct Answer

A:

DAI verifies ARP bindings using trusted information and may reject legitimate fixed-address hosts without an authorized binding. Security engineering must restore the approved service without relaxing unrelated protection.

Incorrect Answers

B:

Intersight RBAC and organizational scoping define which managed resources an operator may control. This concerns intersight scoped operations, not dynamic ARP inspection source of truth.

C:

Microsegmentation can classify subsets of endpoints beyond broad subnet grouping and apply finer-grained controls. That response is associated with aci microsegmentation selector rather than the specific dynamic arp inspection source of truth condition described here. For the stated failure, the preferred action is: Validate DAI binding sources and configure a supported static ARP ACL or binding for the approved fixed-address hosts. Relevant evidence: Inspect DAI drop counters, DHCP snooping binding table, static host assignments and ARP inspection logs. Security engineering must restore the approved service without relaxing unrelated protection.

D:

DHCP snooping should accept DHCP server responses from trusted paths while suppressing rogue access-port servers. That response is associated with dhcp snooping trusted uplink rather than the specific dynamic arp inspection source of truth condition described here. For the stated failure, the preferred action is: Validate DAI binding sources and configure a supported static ARP ACL or binding for the approved fixed-address hosts. Relevant evidence: Inspect DAI drop counters, DHCP snooping binding table, static host assignments and ARP inspection logs. Security engineering must restore the approved service without relaxing unrelated protection.

Question 173

Switch administrators lose access during a TACACS+ outage because there is no tested, secured local recovery path. Security engineering must restore the approved service without relaxing unrelated protection. Which result would best confirm that the remediation worked?

  1. Only the approved application ports work between the two EPGs while nonapproved flows remain blocked.
  2. Authorized recovery login works during a controlled AAA outage and normal centralized authentication resumes afterward.
  3. Tagged VMs appear in the intended microsegmented EPG and only approved flows traverse the boundary.
  4. The contractor can view interface health but an attempted configuration change is denied and logged.

Explanation

Correct Answer

B:

Authorized recovery login works during a controlled AAA outage and normal centralized authentication resumes afterward. This result tests the original failure rather than reporting merely that the configuration command was accepted. Remote AAA improves centralized administration but must have an appropriate resilient recovery mechanism. Security engineering must restore the approved service without relaxing unrelated protection.

Incorrect Answers

A:

Only the approved application ports work between the two EPGs while nonapproved flows remain blocked. That response is associated with aci inter-epg contract rather than the specific centralized aaa fallback condition described here. For the stated failure, the preferred action is: Configure and test the approved AAA method order and protected break-glass account following change policy. Relevant evidence: Inspect TACACS+ reachability, AAA method lists, local credentials and access accounting. Security engineering must restore the approved service without relaxing unrelated protection.

C:

Tagged VMs appear in the intended microsegmented EPG and only approved flows traverse the boundary. This concerns aci microsegmentation selector, not centralized AAA fallback.

D:

The contractor can view interface health but an attempted configuration change is denied and logged. That response is associated with nx-os administrative rbac rather than the specific centralized aaa fallback condition described here. For the stated failure, the preferred action is: Configure and test the approved AAA method order and protected break-glass account following change policy. Relevant evidence: Inspect TACACS+ reachability, AAA method lists, local credentials and access accounting. Security engineering must restore the approved service without relaxing unrelated protection.

Question 174

A UCS-X chassis is physically installed but policies authored for a legacy UCS Manager workflow cannot be assigned to its server profiles. Operations is validating the host before approving production workload placement. Which technical principle best explains the recommended response?

  1. UCS-X in Intersight Managed Mode uses Intersight-defined policies and profiles rather than unmodified UCS Manager assumptions.
  2. Intersight resource assignment and RBAC limit which infrastructure objects and policies an administrator can manage.
  3. UCS identity pools must avoid reuse because overlapping MAC addresses can cause Layer 2 instability and confusing endpoint learning.
  4. Intersight Managed Mode applies shared domain-level fabric configuration through domain profiles and associated policies.

Explanation

Correct Answer

A:

UCS-X in Intersight Managed Mode uses Intersight-defined policies and profiles rather than unmodified UCS Manager assumptions. Operations is validating the host before approving production workload placement.

Incorrect Answers

B:

Intersight resource assignment and RBAC limit which infrastructure objects and policies an administrator can manage. That response is associated with intersight organization scope rather than the specific ucs-x intersight managed mode condition described here. For the stated failure, the preferred action is: Manage the chassis through its supported Intersight Managed Mode domain and compatible server-profile policies. Relevant evidence: Inspect connected domain registration, Intersight inventory, firmware compatibility and target policy types. Operations is validating the host before approving production workload placement.

C:

UCS identity pools must avoid reuse because overlapping MAC addresses can cause Layer 2 instability and confusing endpoint learning. This concerns UCS mac pool uniqueness, not UCS-x intersight managed mode.

D:

Intersight Managed Mode applies shared domain-level fabric configuration through domain profiles and associated policies. That response is associated with intersight domain profile rather than the specific ucs-x intersight managed mode condition described here. For the stated failure, the preferred action is: Manage the chassis through its supported Intersight Managed Mode domain and compatible server-profile policies. Relevant evidence: Inspect connected domain registration, Intersight inventory, firmware compatibility and target policy types. Operations is validating the host before approving production workload placement.

Question 175

A blade's vHBA is configured but the upstream SAN fabric never sees its WWPN login. Operations is validating the host before approving production workload placement. What should the operator avoid assuming from the observed state?

  1. A high-priority label inside UCS does not guarantee every upstream switch honors that class.
  2. A unique server serial number does not replace unique Fibre Channel initiator identifiers.
  3. A storage-array LUN mapping cannot make an offline UCS SAN uplink carry the vHBA frames.
  4. Assigning service profiles before physical discovery is healthy cannot correct a failed IOM link.

Explanation

Correct Answer

C:

A storage-array LUN mapping cannot make an offline UCS SAN uplink carry the vHBA frames. A blade vHBA needs an operational fabric path and correct VSAN association before a fabric login can occur. Operations is validating the host before approving production workload placement.

Incorrect Answers

A:

A high-priority label inside UCS does not guarantee every upstream switch honors that class. That response is associated with ucs network qos policy rather than the specific san connectivity from blade chassis condition described here. For the stated failure, the preferred action is: Validate the UCS SAN uplink, vHBA fabric pinning and VSAN assignment before modifying LUN masks. Relevant evidence: Inspect vHBA identity, SAN uplink operational state, VSAN mapping and upstream FLOGI entries. Operations is validating the host before approving production workload placement.

B:

A unique server serial number does not replace unique Fibre Channel initiator identifiers. That response is associated with wwpn pool allocation rather than the specific san connectivity from blade chassis condition described here. For the stated failure, the preferred action is: Validate the UCS SAN uplink, vHBA fabric pinning and VSAN assignment before modifying LUN masks. Relevant evidence: Inspect vHBA identity, SAN uplink operational state, VSAN mapping and upstream FLOGI entries. Operations is validating the host before approving production workload placement.

D:

Assigning service profiles before physical discovery is healthy cannot correct a failed IOM link. This concerns UCS blade chassis IOM discovery, not SAN connectivity from blade chassis.

Question 176

Layer 2 VXLAN segments work but traffic between tenant IP subnets fails because the L3 VNI is associated with the wrong VRF. The team is preparing a controlled production change and must preserve fabric reachability. What is the best next implementation or troubleshooting step?

  1. Verify OSPFv3 is enabled on the intended interface and that IPv6 link-local reachability and area configuration match.
  2. Correct the L3 VNI and tenant VRF association and check EVPN route import/export on participating VTEPs.
  3. Check the EVPN address family peering and route-type advertisements before altering the VXLAN data plane.
  4. Align the OSPF interface area and adjacency parameters on both neighbors before changing routing policy.

Explanation

Correct Answer

B:

Correct the L3 VNI and tenant VRF association and check EVPN route import/export on participating VTEPs. Integrated routing and bridging requires consistent L3 VNI and tenant routing context for inter-subnet forwarding. The team is preparing a controlled production change and must preserve fabric reachability.

Incorrect Answers

A:

Verify OSPFv3 is enabled on the intended interface and that IPv6 link-local reachability and area configuration match. This concerns ospfv3 IPv6 neighbor discovery, not evpn vni-to-vrf mapping.

C:

Check the EVPN address family peering and route-type advertisements before altering the VXLAN data plane. This concerns mp-BGP evpn route learning, not evpn vni-to-vrf mapping.

D:

Align the OSPF interface area and adjacency parameters on both neighbors before changing routing policy. This concerns OSPF area compatibility, not evpn vni-to-vrf mapping.

Question 177

During an OSPF key rollover, one peer begins rejecting signed hello packets even though the links remain up. A follow-up access review asks the team to validate the same boundary with a controlled negative test. Which test result best demonstrates restoration of the intended behavior?

  1. Spoofed source addresses are dropped while approved host traffic continues normally.
  2. The link carries encrypted authenticated traffic and rejects frames without valid link security associations.
  3. Only approved device identities log in and the unauthorized initiator is denied without disrupting valid paths.
  4. The adjacency remains Full across the rollover while old credentials are retired after verification.

Explanation

Correct Answer

D:

The adjacency remains Full across the rollover while old credentials are retired after verification. This result tests the original failure rather than reporting merely that the configuration command was accepted. Routing-protocol authentication needs overlapping compatible keys during a planned rollover to preserve adjacency. A follow-up access review asks the team to validate the same boundary with a controlled negative test.

Incorrect Answers

A:

Spoofed source addresses are dropped while approved host traffic continues normally. This concerns first-hop ip/mac spoof defense, not routing protocol keychain rollover.

B:

The link carries encrypted authenticated traffic and rejects frames without valid link security associations. This concerns MACsec protection scope, not routing protocol keychain rollover.

C:

Only approved device identities log in and the unauthorized initiator is denied without disrupting valid paths. This concerns fibre channel port security, not routing protocol keychain rollover.

Question 178

Two ACI EPGs can each reach their own default gateway but permitted application traffic between them is denied. Security engineering must restore the approved service without relaxing unrelated protection. How should the implementation be validated against the original failure?

  1. Authorized recovery login works during a controlled AAA outage and normal centralized authentication resumes afterward.
  2. Clients obtain leases from the authorized server and rogue DHCP replies on access ports are still rejected.
  3. Only the approved application ports work between the two EPGs while nonapproved flows remain blocked.
  4. Tagged VMs appear in the intended microsegmented EPG and only approved flows traverse the boundary.

Explanation

Correct Answer

C:

Only the approved application ports work between the two EPGs while nonapproved flows remain blocked. This result tests the original failure rather than reporting merely that the configuration command was accepted. ACI contracts control permitted communication between endpoint groups, separate from basic endpoint addressing. Security engineering must restore the approved service without relaxing unrelated protection.

Incorrect Answers

A:

Authorized recovery login works during a controlled AAA outage and normal centralized authentication resumes afterward. That response is associated with centralized aaa fallback rather than the specific aci inter-epg contract condition described here. For the stated failure, the preferred action is: Apply and validate a narrowly scoped ACI contract with the required provider-consumer relationship and filters. Relevant evidence: Inspect EPG bindings, contracts, subject filters, provider-consumer association and zoning rules. Security engineering must restore the approved service without relaxing unrelated protection.

B:

Clients obtain leases from the authorized server and rogue DHCP replies on access ports are still rejected. This concerns DHCP snooping trusted uplink, not aci inter-epg contract.

D:

Tagged VMs appear in the intended microsegmented EPG and only approved flows traverse the boundary. That response is associated with aci microsegmentation selector rather than the specific aci inter-epg contract condition described here. For the stated failure, the preferred action is: Apply and validate a narrowly scoped ACI contract with the required provider-consumer relationship and filters. Relevant evidence: Inspect EPG bindings, contracts, subject filters, provider-consumer association and zoning rules. Security engineering must restore the approved service without relaxing unrelated protection.

Question 179

An unauthorized initiator plugs into an available SAN switch port and attempts fabric login using an unapproved WWPN. A follow-up access review asks the team to validate the same boundary with a controlled negative test. What should the operator avoid assuming from the observed state?

  1. Changing the entire subnet ACL is not equivalent to targeting a specific VM attribute-defined subset.
  2. A user with no host storage access might still alter SAN switch policy if management RBAC is too broad.
  3. Host-level WWPN zoning is not a substitute for constraining switch-to-switch fabric membership.
  4. Permissive fabric zoning does not itself guarantee that an unauthorized physical initiator cannot log in.

Explanation

Correct Answer

D:

Permissive fabric zoning does not itself guarantee that an unauthorized physical initiator cannot log in. FC port security can restrict which device WWNs are permitted to connect through designated fabric ports. A follow-up access review asks the team to validate the same boundary with a controlled negative test.

Incorrect Answers

A:

Changing the entire subnet ACL is not equivalent to targeting a specific VM attribute-defined subset. This concerns aci microsegmentation selector, not fibre channel port security.

B:

A user with no host storage access might still alter SAN switch policy if management RBAC is too broad. This concerns mds SAN administrative control, not fibre channel port security.

C:

Host-level WWPN zoning is not a substitute for constraining switch-to-switch fabric membership. This concerns fabric binding membership, not fibre channel port security.

Question 180

A fabric dashboard displays healthy switch reachability but a service experiences consistent high-latency paths. The team is preparing a controlled production change and must preserve fabric reachability. What post-change observation gives the strongest evidence of success?

  1. The pair reaches Full state and the intended prefixes appear in the OSPF route table without new adjacency flaps.
  2. An OSPFv3 Full adjacency forms and IPv6 prefixes become reachable through the correct next hop.
  3. The identified path issue is reproduced in telemetry and resolved with measurable service recovery.
  4. Captured packets reproduce the reset sequence and identify which endpoint initiated it.

Explanation

Correct Answer

C:

The identified path issue is reproduced in telemetry and resolved with measurable service recovery. This result tests the original failure rather than reporting merely that the configuration command was accepted. Fabric assurance tools combine topology and operational observations but require data correlation to identify service causes. The team is preparing a controlled production change and must preserve fabric reachability.

Incorrect Answers

A:

The pair reaches Full state and the intended prefixes appear in the OSPF route table without new adjacency flaps. This concerns OSPF area compatibility, not nexus dashboard fabric visibility.

B:

An OSPFv3 Full adjacency forms and IPv6 prefixes become reachable through the correct next hop. This concerns ospfv3 IPv6 neighbor discovery, not nexus dashboard fabric visibility.

D:

Captured packets reproduce the reset sequence and identify which endpoint initiated it. This concerns span packet-level diagnosis, not nexus dashboard fabric visibility.


Implementing and Operating Cisco Data Center Core Technologies (DCCOR) (350-601) Practice Tests

Purchase Individually

350-601 Premium File

Premium File
350-601 Premium File
630 Q&A
$76.99$69.99

350-601 Training Video Course

Training Course
350-601 Training Video Course
143 Lectures
$27.49$24.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.