Question 740
In Northstar Logistics's production-readiness review, Topology asymmetric routing was selected to investigate a connection where requests arrive but return packets take an unintended path. Even if the expected outcome appears correct, which explicitly relevant limitation must the team include in its rollout and monitoring plan?
- A backend cannot be assumed publicly reachable merely because the proxy is.
- Allowing only TCP 443 does not automatically admit an app listening on 8443.
- The next hop must itself be reachable on a connected route.
- A successful forward-path trace does not prove the return direction is correct.
Explanation
Correct Answer
D:For Topology asymmetric routing, the pertinent residual constraint is that a successful forward-path trace does not prove the return direction is correct. The implementation may satisfy investigate a connection where requests arrive but return packets take an unintended path, but this boundary must still be handled in operations.
Incorrect Answers
A:This limitation is associated with Topology DNS to reverse proxy and its separate need to trace a user request that resolves a hostname to a reverse proxy rather than a backend. It is not the most direct operational boundary for the selected Topology asymmetric routing, whose relevant risk is that a successful forward-path trace does not prove the return direction is correct.
B:This limitation is associated with Topology TCP port identification and its separate need to diagnose why client HTTPS reaches a firewall but not a service listening on TCP 8443. It is not the most direct operational boundary for the selected Topology asymmetric routing, whose relevant risk is that a successful forward-path trace does not prove the return direction is correct.
C:This limitation is associated with Static route next hop and its separate need to reach a remote private subnet through a known adjacent router. It is not the most direct operational boundary for the selected Topology asymmetric routing, whose relevant risk is that a successful forward-path trace does not prove the return direction is correct.
Question 741
Coastal Operations needs to trace a user request that resolves a hostname to a reverse proxy rather than a backend. The implementation team is comparing methods that address different problems in its Cisco-automation environment. Which technical approach directly satisfies the stated requirement?
- Topology TCP port identification
- Topology DNS to reverse proxy
- Topology asymmetric routing
- DHCP lease assignment
Explanation
Correct Answer
B:Topology DNS to reverse proxy is the suitable approach here: follow DNS resolution to proxy and then its configured backend route. It addresses the requirement to trace a user request that resolves a hostname to a reverse proxy rather than a backend; acceptance can be checked when the external address is the proxy while internal routing selects the application.
Incorrect Answers
A:Topology TCP port identification addresses another requirement, namely to diagnose why client HTTPS reaches a firewall but not a service listening on TCP 8443. A typical way to do this is to verify firewall policy and forwarding for the actual destination TCP port 8443; it does not directly address the stated need to trace a user request that resolves a hostname to a reverse proxy rather than a backend.
C:Topology asymmetric routing addresses another requirement, namely to investigate a connection where requests arrive but return packets take an unintended path. A typical way to do this is to check reverse routing and stateful firewall path symmetry; it does not directly address the stated need to trace a user request that resolves a hostname to a reverse proxy rather than a backend.
D:DHCP lease assignment addresses another requirement, namely to allow a new laptop to obtain IP settings automatically on an authorized VLAN. A typical way to do this is to use a working DHCP service or relay appropriate to the subnet; it does not directly address the stated need to trace a user request that resolves a hostname to a reverse proxy rather than a backend.
Question 742
During a change at Ridgewell Research, engineers have selected Topology DNS to reverse proxy because they need to trace a user request that resolves a hostname to a reverse proxy rather than a backend. Which concrete engineering action must be taken to implement the selected approach, rather than one of the nearby but different designs?
- Verify firewall policy and forwarding for the actual destination TCP port 8443.
- Check reverse routing and stateful firewall path symmetry.
- Follow DNS resolution to proxy and then its configured backend route.
- Use a working DHCP service or relay appropriate to the subnet.
Explanation
Correct Answer
C:This action implements Topology DNS to reverse proxy in the stated environment. To trace a user request that resolves a hostname to a reverse proxy rather than a backend, engineers should follow DNS resolution to proxy and then its configured backend route; the corresponding acceptance condition is that the external address is the proxy while internal routing selects the application.
Incorrect Answers
A:This engineering action belongs to Topology TCP port identification, where the purpose is to diagnose why client HTTPS reaches a firewall but not a service listening on TCP 8443. Implementing it would not establish Topology DNS to reverse proxy for the stated requirement to trace a user request that resolves a hostname to a reverse proxy rather than a backend.
B:This engineering action belongs to Topology asymmetric routing, where the purpose is to investigate a connection where requests arrive but return packets take an unintended path. Implementing it would not establish Topology DNS to reverse proxy for the stated requirement to trace a user request that resolves a hostname to a reverse proxy rather than a backend.
D:This engineering action belongs to DHCP lease assignment, where the purpose is to allow a new laptop to obtain IP settings automatically on an authorized VLAN. Implementing it would not establish Topology DNS to reverse proxy for the stated requirement to trace a user request that resolves a hostname to a reverse proxy rather than a backend.
Question 743
Linden Health has implemented Topology DNS to reverse proxy by taking this action: follow DNS resolution to proxy and then its configured backend route. For the requirement to trace a user request that resolves a hostname to a reverse proxy rather than a backend, which actual observation most directly verifies the desired result?
- The required port reaches the correct listener on the mapped target.
- Return traffic follows an allowed path through the required stateful policy.
- The laptop receives address, prefix, router and DNS options as configured.
- The external address is the proxy while internal routing selects the application.
Explanation
Correct Answer
D:The observation that the external address is the proxy while internal routing selects the application is tied to the stated implementation of Topology DNS to reverse proxy. It tests the requested outcome of trace a user request that resolves a hostname to a reverse proxy rather than a backend instead of merely checking an unrelated component.
Incorrect Answers
A:This observation evaluates Topology TCP port identification, which targets the distinct requirement to diagnose why client HTTPS reaches a firewall but not a service listening on TCP 8443. It therefore fails to validate the stated Topology DNS to reverse proxy outcome: the external address is the proxy while internal routing selects the application.
B:This observation evaluates Topology asymmetric routing, which targets the distinct requirement to investigate a connection where requests arrive but return packets take an unintended path. It therefore fails to validate the stated Topology DNS to reverse proxy outcome: the external address is the proxy while internal routing selects the application.
C:This observation evaluates DHCP lease assignment, which targets the distinct requirement to allow a new laptop to obtain IP settings automatically on an authorized VLAN. It therefore fails to validate the stated Topology DNS to reverse proxy outcome: the external address is the proxy while internal routing selects the application.
Question 744
In Metro Services's production-readiness review, Topology DNS to reverse proxy was selected to trace a user request that resolves a hostname to a reverse proxy rather than a backend. Even if the expected outcome appears correct, which explicitly relevant limitation must the team include in its rollout and monitoring plan?
- A backend cannot be assumed publicly reachable merely because the proxy is.
- Allowing only TCP 443 does not automatically admit an app listening on 8443.
- A successful forward-path trace does not prove the return direction is correct.
- DHCP provides configuration; it does not prove the Internet path is reachable.
Explanation
Correct Answer
A:For Topology DNS to reverse proxy, the pertinent residual constraint is that a backend cannot be assumed publicly reachable merely because the proxy is. The implementation may satisfy trace a user request that resolves a hostname to a reverse proxy rather than a backend, but this boundary must still be handled in operations.
Incorrect Answers
B:This limitation is associated with Topology TCP port identification and its separate need to diagnose why client HTTPS reaches a firewall but not a service listening on TCP 8443. It is not the most direct operational boundary for the selected Topology DNS to reverse proxy, whose relevant risk is that a backend cannot be assumed publicly reachable merely because the proxy is.
C:This limitation is associated with Topology asymmetric routing and its separate need to investigate a connection where requests arrive but return packets take an unintended path. It is not the most direct operational boundary for the selected Topology DNS to reverse proxy, whose relevant risk is that a backend cannot be assumed publicly reachable merely because the proxy is.
D:This limitation is associated with DHCP lease assignment and its separate need to allow a new laptop to obtain IP settings automatically on an authorized VLAN. It is not the most direct operational boundary for the selected Topology DNS to reverse proxy, whose relevant risk is that a backend cannot be assumed publicly reachable merely because the proxy is.
Question 745
Brookfield Systems needs to separate packet transit from device management operations. The implementation team is comparing methods that address different problems in its Cisco-automation environment. Which technical approach directly satisfies the stated requirement?
- Management-plane API access
- Control-plane routing
- Data-plane forwarding
- VLAN segmentation
Explanation
Correct Answer
C:Data-plane forwarding is the suitable approach here: recognize data plane as the component forwarding production packets. It addresses the requirement to separate packet transit from device management operations; acceptance can be checked when measured forwarding counters change as packets traverse the interface.
Incorrect Answers
A:Management-plane API access addresses another requirement, namely to limit who can modify device settings remotely via SSH or HTTPS. A typical way to do this is to enforce management-plane authentication and access restrictions; it does not directly address the stated need to separate packet transit from device management operations.
B:Control-plane routing addresses another requirement, namely to inspect why a new route was not learned after a neighbor outage. A typical way to do this is to check routing protocol adjacency and control-plane route information; it does not directly address the stated need to separate packet transit from device management operations.
D:VLAN segmentation addresses another requirement, namely to keep lab and production broadcasts logically separated on one switching infrastructure. A typical way to do this is to assign access ports to distinct VLANs and route only through approved Layer 3 policy; it does not directly address the stated need to separate packet transit from device management operations.
Question 746
During a change at Arbor Financial, engineers have selected Data-plane forwarding because they need to separate packet transit from device management operations. Which concrete engineering action must be taken to implement the selected approach, rather than one of the nearby but different designs?
- Enforce management-plane authentication and access restrictions.
- Check routing protocol adjacency and control-plane route information.
- Assign access ports to distinct VLANs and route only through approved Layer 3 policy.
- Recognize data plane as the component forwarding production packets.
Explanation
Correct Answer
D:This action implements Data-plane forwarding in the stated environment. To separate packet transit from device management operations, engineers should recognize data plane as the component forwarding production packets; the corresponding acceptance condition is that measured forwarding counters change as packets traverse the interface.
Incorrect Answers
A:This engineering action belongs to Management-plane API access, where the purpose is to limit who can modify device settings remotely via SSH or HTTPS. Implementing it would not establish Data-plane forwarding for the stated requirement to separate packet transit from device management operations.
B:This engineering action belongs to Control-plane routing, where the purpose is to inspect why a new route was not learned after a neighbor outage. Implementing it would not establish Data-plane forwarding for the stated requirement to separate packet transit from device management operations.
C:This engineering action belongs to VLAN segmentation, where the purpose is to keep lab and production broadcasts logically separated on one switching infrastructure. Implementing it would not establish Data-plane forwarding for the stated requirement to separate packet transit from device management operations.
Question 747
Keystone Media has implemented Data-plane forwarding by taking this action: recognize data plane as the component forwarding production packets. For the requirement to separate packet transit from device management operations, which actual observation most directly verifies the desired result?
- Measured forwarding counters change as packets traverse the interface.
- Only authorized clients can reach and use management interfaces.
- A valid protocol adjacency installs the expected route when permitted.
- Layer 2 broadcasts remain inside each assigned VLAN.
Explanation
Correct Answer
A:The observation that measured forwarding counters change as packets traverse the interface is tied to the stated implementation of Data-plane forwarding. It tests the requested outcome of separate packet transit from device management operations instead of merely checking an unrelated component.
Incorrect Answers
B:This observation evaluates Management-plane API access, which targets the distinct requirement to limit who can modify device settings remotely via SSH or HTTPS. It therefore fails to validate the stated Data-plane forwarding outcome: measured forwarding counters change as packets traverse the interface.
C:This observation evaluates Control-plane routing, which targets the distinct requirement to inspect why a new route was not learned after a neighbor outage. It therefore fails to validate the stated Data-plane forwarding outcome: measured forwarding counters change as packets traverse the interface.
D:This observation evaluates VLAN segmentation, which targets the distinct requirement to keep lab and production broadcasts logically separated on one switching infrastructure. It therefore fails to validate the stated Data-plane forwarding outcome: measured forwarding counters change as packets traverse the interface.
Question 748
In Evergreen Labs's production-readiness review, Data-plane forwarding was selected to separate packet transit from device management operations. Even if the expected outcome appears correct, which explicitly relevant limitation must the team include in its rollout and monitoring plan?
- A management ACL does not define every transit forwarding rule.
- Management-plane API health does not prove forwarding path health.
- Control-plane reachability does not guarantee all ACLs permit data traffic.
- VLAN separation does not encrypt traffic or replace Layer 3 filtering.
Explanation
Correct Answer
B:For Data-plane forwarding, the pertinent residual constraint is that management-plane API health does not prove forwarding path health. The implementation may satisfy separate packet transit from device management operations, but this boundary must still be handled in operations.
Incorrect Answers
A:This limitation is associated with Management-plane API access and its separate need to limit who can modify device settings remotely via SSH or HTTPS. It is not the most direct operational boundary for the selected Data-plane forwarding, whose relevant risk is that management-plane API health does not prove forwarding path health.
C:This limitation is associated with Control-plane routing and its separate need to inspect why a new route was not learned after a neighbor outage. It is not the most direct operational boundary for the selected Data-plane forwarding, whose relevant risk is that management-plane API health does not prove forwarding path health.
D:This limitation is associated with VLAN segmentation and its separate need to keep lab and production broadcasts logically separated on one switching infrastructure. It is not the most direct operational boundary for the selected Data-plane forwarding, whose relevant risk is that management-plane API health does not prove forwarding path health.
Question 749
Meridian Transit needs to inspect why a new route was not learned after a neighbor outage. The implementation team is comparing methods that address different problems in its Cisco-automation environment. Which technical approach directly satisfies the stated requirement?
- Data-plane forwarding
- Management-plane API access
- Default gateway use
- Control-plane routing
Explanation
Correct Answer
D:Control-plane routing is the suitable approach here: check routing protocol adjacency and control-plane route information. It addresses the requirement to inspect why a new route was not learned after a neighbor outage; acceptance can be checked when a valid protocol adjacency installs the expected route when permitted.
Incorrect Answers
A:Data-plane forwarding addresses another requirement, namely to separate packet transit from device management operations. A typical way to do this is to recognize data plane as the component forwarding production packets; it does not directly address the stated need to inspect why a new route was not learned after a neighbor outage.
B:Management-plane API access addresses another requirement, namely to limit who can modify device settings remotely via SSH or HTTPS. A typical way to do this is to enforce management-plane authentication and access restrictions; it does not directly address the stated need to inspect why a new route was not learned after a neighbor outage.
C:Default gateway use addresses another requirement, namely to send traffic from a host to an IP subnet outside its directly connected prefix. A typical way to do this is to forward the packet to the configured local default gateway; it does not directly address the stated need to inspect why a new route was not learned after a neighbor outage.
Question 750
During a change at Atlas Retail, engineers have selected Control-plane routing because they need to inspect why a new route was not learned after a neighbor outage. Which concrete engineering action must be taken to implement the selected approach, rather than one of the nearby but different designs?
- Check routing protocol adjacency and control-plane route information.
- Recognize data plane as the component forwarding production packets.
- Enforce management-plane authentication and access restrictions.
- Forward the packet to the configured local default gateway.
Explanation
Correct Answer
A:This action implements Control-plane routing in the stated environment. To inspect why a new route was not learned after a neighbor outage, engineers should check routing protocol adjacency and control-plane route information; the corresponding acceptance condition is that a valid protocol adjacency installs the expected route when permitted.
Incorrect Answers
B:This engineering action belongs to Data-plane forwarding, where the purpose is to separate packet transit from device management operations. Implementing it would not establish Control-plane routing for the stated requirement to inspect why a new route was not learned after a neighbor outage.
C:This engineering action belongs to Management-plane API access, where the purpose is to limit who can modify device settings remotely via SSH or HTTPS. Implementing it would not establish Control-plane routing for the stated requirement to inspect why a new route was not learned after a neighbor outage.
D:This engineering action belongs to Default gateway use, where the purpose is to send traffic from a host to an IP subnet outside its directly connected prefix. Implementing it would not establish Control-plane routing for the stated requirement to inspect why a new route was not learned after a neighbor outage.
DevNet Associate (DEVASC) (200-901) Practice Tests