Pass Your Cisco 200-901 Exam Easy!

Cisco 200-901 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

200-901 Premium Bundle

$74.99

Cisco 200-901 Premium Bundle

200-901 Premium File: 431 Questions & Answers

Last Update: Oct 12, 2026

200-901 Training Course: 11 Video Lectures

200-901 Bundle gives you unlimited access to "200-901" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
Cisco 200-901 Premium Bundle
Cisco 200-901 Premium Bundle

200-901 Premium File: 431 Questions & Answers

Last Update: Oct 12, 2026

200-901 Training Course: 11 Video Lectures

$74.99

200-901 Bundle gives you unlimited access to "200-901" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

Cisco 200-901 Practice Test 74

Question 730

During a change at Northstar Logistics, engineers have selected Layer 2 switch learning because they need to locate the reason frames reach the wrong port after a topology change. Which concrete engineering action must be taken to implement the selected approach, rather than one of the nearby but different designs?

  1. Use a router or Layer 3 switch with valid routing for both networks.
  2. Apply firewall rules using appropriate source, destination, service and direction.
  3. Send new requests among available backends with health checks.
  4. Inspect the switch MAC address table and VLAN membership.

Explanation

Correct Answer

D:

This action implements Layer 2 switch learning in the stated environment. To locate the reason frames reach the wrong port after a topology change, engineers should inspect the switch MAC address table and VLAN membership; the corresponding acceptance condition is that learned destination MAC maps to the intended active port within its VLAN.

Incorrect Answers

A:

This engineering action belongs to Router between subnets, where the purpose is to forward traffic between two separately routed IP networks. Implementing it would not establish Layer 2 switch learning for the stated requirement to locate the reason frames reach the wrong port after a topology change.

B:

This engineering action belongs to Firewall flow enforcement, where the purpose is to deny unauthorized east-west API traffic while keeping approved flows. Implementing it would not establish Layer 2 switch learning for the stated requirement to locate the reason frames reach the wrong port after a topology change.

C:

This engineering action belongs to Load balancer traffic distribution, where the purpose is to avoid overloading a single healthy API replica. Implementing it would not establish Layer 2 switch learning for the stated requirement to locate the reason frames reach the wrong port after a topology change.

Question 731

Willow Data has implemented Layer 2 switch learning by taking this action: inspect the switch MAC address table and VLAN membership. For the requirement to locate the reason frames reach the wrong port after a topology change, which actual observation most directly verifies the desired result?

  1. Learned destination MAC maps to the intended active port within its VLAN.
  2. Packets cross the layer-3 boundary through a route.
  3. Unapproved sessions are blocked while allowed sessions pass.
  4. Failed backends are excluded from selection until recovery.

Explanation

Correct Answer

A:

The observation that learned destination MAC maps to the intended active port within its VLAN is tied to the stated implementation of Layer 2 switch learning. It tests the requested outcome of locate the reason frames reach the wrong port after a topology change instead of merely checking an unrelated component.

Incorrect Answers

B:

This observation evaluates Router between subnets, which targets the distinct requirement to forward traffic between two separately routed IP networks. It therefore fails to validate the stated Layer 2 switch learning outcome: learned destination MAC maps to the intended active port within its VLAN.

C:

This observation evaluates Firewall flow enforcement, which targets the distinct requirement to deny unauthorized east-west API traffic while keeping approved flows. It therefore fails to validate the stated Layer 2 switch learning outcome: learned destination MAC maps to the intended active port within its VLAN.

D:

This observation evaluates Load balancer traffic distribution, which targets the distinct requirement to avoid overloading a single healthy API replica. It therefore fails to validate the stated Layer 2 switch learning outcome: learned destination MAC maps to the intended active port within its VLAN.

Question 732

In Meridian Transit's production-readiness review, Layer 2 switch learning was selected to locate the reason frames reach the wrong port after a topology change. Even if the expected outcome appears correct, which explicitly relevant limitation must the team include in its rollout and monitoring plan?

  1. A pure Layer 2 switch does not automatically perform IP routing.
  2. A MAC table is not the same as an IP route table.
  3. A firewall rule is not a substitute for identity and API authorization.
  4. Load balancing does not automatically synchronize application session state.

Explanation

Correct Answer

B:

For Layer 2 switch learning, the pertinent residual constraint is that a MAC table is not the same as an IP route table. The implementation may satisfy locate the reason frames reach the wrong port after a topology change, but this boundary must still be handled in operations.

Incorrect Answers

A:

This limitation is associated with Router between subnets and its separate need to forward traffic between two separately routed IP networks. It is not the most direct operational boundary for the selected Layer 2 switch learning, whose relevant risk is that a MAC table is not the same as an IP route table.

C:

This limitation is associated with Firewall flow enforcement and its separate need to deny unauthorized east-west API traffic while keeping approved flows. It is not the most direct operational boundary for the selected Layer 2 switch learning, whose relevant risk is that a MAC table is not the same as an IP route table.

D:

This limitation is associated with Load balancer traffic distribution and its separate need to avoid overloading a single healthy API replica. It is not the most direct operational boundary for the selected Layer 2 switch learning, whose relevant risk is that a MAC table is not the same as an IP route table.

Question 733

Linden Health needs to diagnose why client HTTPS reaches a firewall but not a service listening on TCP 8443. The implementation team is comparing methods that address different problems in its Cisco-automation environment. Which technical approach directly satisfies the stated requirement?

  1. Topology DNS to reverse proxy
  2. Topology asymmetric routing
  3. Control-plane routing
  4. Topology TCP port identification

Explanation

Correct Answer

D:

Topology TCP port identification is the suitable approach here: verify firewall policy and forwarding for the actual destination TCP port 8443. It addresses the requirement to diagnose why client HTTPS reaches a firewall but not a service listening on TCP 8443; acceptance can be checked when the required port reaches the correct listener on the mapped target.

Incorrect Answers

A:

Topology DNS to reverse proxy addresses another requirement, namely to trace a user request that resolves a hostname to a reverse proxy rather than a backend. A typical way to do this is to follow DNS resolution to proxy and then its configured backend route; it does not directly address the stated need to diagnose why client HTTPS reaches a firewall but not a service listening on TCP 8443.

B:

Topology asymmetric routing addresses another requirement, namely to investigate a connection where requests arrive but return packets take an unintended path. A typical way to do this is to check reverse routing and stateful firewall path symmetry; it does not directly address the stated need to diagnose why client HTTPS reaches a firewall but not a service listening on TCP 8443.

C:

Control-plane routing addresses another requirement, namely to inspect why a new route was not learned after a neighbor outage. A typical way to do this is to check routing protocol adjacency and control-plane route information; it does not directly address the stated need to diagnose why client HTTPS reaches a firewall but not a service listening on TCP 8443.

Question 734

During a change at Metro Services, engineers have selected Topology TCP port identification because they need to diagnose why client HTTPS reaches a firewall but not a service listening on TCP 8443. Which concrete engineering action must be taken to implement the selected approach, rather than one of the nearby but different designs?

  1. Verify firewall policy and forwarding for the actual destination TCP port 8443.
  2. Follow DNS resolution to proxy and then its configured backend route.
  3. Check reverse routing and stateful firewall path symmetry.
  4. Check routing protocol adjacency and control-plane route information.

Explanation

Correct Answer

A:

This action implements Topology TCP port identification in the stated environment. To diagnose why client HTTPS reaches a firewall but not a service listening on TCP 8443, engineers should verify firewall policy and forwarding for the actual destination TCP port 8443; the corresponding acceptance condition is that the required port reaches the correct listener on the mapped target.

Incorrect Answers

B:

This engineering action belongs to Topology DNS to reverse proxy, where the purpose is to trace a user request that resolves a hostname to a reverse proxy rather than a backend. Implementing it would not establish Topology TCP port identification for the stated requirement to diagnose why client HTTPS reaches a firewall but not a service listening on TCP 8443.

C:

This engineering action belongs to Topology asymmetric routing, where the purpose is to investigate a connection where requests arrive but return packets take an unintended path. Implementing it would not establish Topology TCP port identification for the stated requirement to diagnose why client HTTPS reaches a firewall but not a service listening on TCP 8443.

D:

This engineering action belongs to Control-plane routing, where the purpose is to inspect why a new route was not learned after a neighbor outage. Implementing it would not establish Topology TCP port identification for the stated requirement to diagnose why client HTTPS reaches a firewall but not a service listening on TCP 8443.

Question 735

Highland Analytics has implemented Topology TCP port identification by taking this action: verify firewall policy and forwarding for the actual destination TCP port 8443. For the requirement to diagnose why client HTTPS reaches a firewall but not a service listening on TCP 8443, which actual observation most directly verifies the desired result?

  1. The external address is the proxy while internal routing selects the application.
  2. The required port reaches the correct listener on the mapped target.
  3. Return traffic follows an allowed path through the required stateful policy.
  4. A valid protocol adjacency installs the expected route when permitted.

Explanation

Correct Answer

B:

The observation that the required port reaches the correct listener on the mapped target is tied to the stated implementation of Topology TCP port identification. It tests the requested outcome of diagnose why client HTTPS reaches a firewall but not a service listening on TCP 8443 instead of merely checking an unrelated component.

Incorrect Answers

A:

This observation evaluates Topology DNS to reverse proxy, which targets the distinct requirement to trace a user request that resolves a hostname to a reverse proxy rather than a backend. It therefore fails to validate the stated Topology TCP port identification outcome: the required port reaches the correct listener on the mapped target.

C:

This observation evaluates Topology asymmetric routing, which targets the distinct requirement to investigate a connection where requests arrive but return packets take an unintended path. It therefore fails to validate the stated Topology TCP port identification outcome: the required port reaches the correct listener on the mapped target.

D:

This observation evaluates Control-plane routing, which targets the distinct requirement to inspect why a new route was not learned after a neighbor outage. It therefore fails to validate the stated Topology TCP port identification outcome: the required port reaches the correct listener on the mapped target.

Question 736

In Summit University's production-readiness review, Topology TCP port identification was selected to diagnose why client HTTPS reaches a firewall but not a service listening on TCP 8443. Even if the expected outcome appears correct, which explicitly relevant limitation must the team include in its rollout and monitoring plan?

  1. A backend cannot be assumed publicly reachable merely because the proxy is.
  2. A successful forward-path trace does not prove the return direction is correct.
  3. Allowing only TCP 443 does not automatically admit an app listening on 8443.
  4. Control-plane reachability does not guarantee all ACLs permit data traffic.

Explanation

Correct Answer

C:

For Topology TCP port identification, the pertinent residual constraint is that allowing only TCP 443 does not automatically admit an app listening on 8443. The implementation may satisfy diagnose why client HTTPS reaches a firewall but not a service listening on TCP 8443, but this boundary must still be handled in operations.

Incorrect Answers

A:

This limitation is associated with Topology DNS to reverse proxy and its separate need to trace a user request that resolves a hostname to a reverse proxy rather than a backend. It is not the most direct operational boundary for the selected Topology TCP port identification, whose relevant risk is that allowing only TCP 443 does not automatically admit an app listening on 8443.

B:

This limitation is associated with Topology asymmetric routing and its separate need to investigate a connection where requests arrive but return packets take an unintended path. It is not the most direct operational boundary for the selected Topology TCP port identification, whose relevant risk is that allowing only TCP 443 does not automatically admit an app listening on 8443.

D:

This limitation is associated with Control-plane routing and its separate need to inspect why a new route was not learned after a neighbor outage. It is not the most direct operational boundary for the selected Topology TCP port identification, whose relevant risk is that allowing only TCP 443 does not automatically admit an app listening on 8443.

Question 737

Keystone Media needs to investigate a connection where requests arrive but return packets take an unintended path. The implementation team is comparing methods that address different problems in its Cisco-automation environment. Which technical approach directly satisfies the stated requirement?

  1. Topology asymmetric routing
  2. Topology DNS to reverse proxy
  3. Topology TCP port identification
  4. Static route next hop

Explanation

Correct Answer

A:

Topology asymmetric routing is the suitable approach here: check reverse routing and stateful firewall path symmetry. It addresses the requirement to investigate a connection where requests arrive but return packets take an unintended path; acceptance can be checked when return traffic follows an allowed path through the required stateful policy.

Incorrect Answers

B:

Topology DNS to reverse proxy addresses another requirement, namely to trace a user request that resolves a hostname to a reverse proxy rather than a backend. A typical way to do this is to follow DNS resolution to proxy and then its configured backend route; it does not directly address the stated need to investigate a connection where requests arrive but return packets take an unintended path.

C:

Topology TCP port identification addresses another requirement, namely to diagnose why client HTTPS reaches a firewall but not a service listening on TCP 8443. A typical way to do this is to verify firewall policy and forwarding for the actual destination TCP port 8443; it does not directly address the stated need to investigate a connection where requests arrive but return packets take an unintended path.

D:

Static route next hop addresses another requirement, namely to reach a remote private subnet through a known adjacent router. A typical way to do this is to install a route for the remote prefix with the reachable next hop; it does not directly address the stated need to investigate a connection where requests arrive but return packets take an unintended path.

Question 738

During a change at Evergreen Labs, engineers have selected Topology asymmetric routing because they need to investigate a connection where requests arrive but return packets take an unintended path. Which concrete engineering action must be taken to implement the selected approach, rather than one of the nearby but different designs?

  1. Follow DNS resolution to proxy and then its configured backend route.
  2. Check reverse routing and stateful firewall path symmetry.
  3. Verify firewall policy and forwarding for the actual destination TCP port 8443.
  4. Install a route for the remote prefix with the reachable next hop.

Explanation

Correct Answer

B:

This action implements Topology asymmetric routing in the stated environment. To investigate a connection where requests arrive but return packets take an unintended path, engineers should check reverse routing and stateful firewall path symmetry; the corresponding acceptance condition is that return traffic follows an allowed path through the required stateful policy.

Incorrect Answers

A:

This engineering action belongs to Topology DNS to reverse proxy, where the purpose is to trace a user request that resolves a hostname to a reverse proxy rather than a backend. Implementing it would not establish Topology asymmetric routing for the stated requirement to investigate a connection where requests arrive but return packets take an unintended path.

C:

This engineering action belongs to Topology TCP port identification, where the purpose is to diagnose why client HTTPS reaches a firewall but not a service listening on TCP 8443. Implementing it would not establish Topology asymmetric routing for the stated requirement to investigate a connection where requests arrive but return packets take an unintended path.

D:

This engineering action belongs to Static route next hop, where the purpose is to reach a remote private subnet through a known adjacent router. Implementing it would not establish Topology asymmetric routing for the stated requirement to investigate a connection where requests arrive but return packets take an unintended path.

Question 739

Cobalt Manufacturing has implemented Topology asymmetric routing by taking this action: check reverse routing and stateful firewall path symmetry. For the requirement to investigate a connection where requests arrive but return packets take an unintended path, which actual observation most directly verifies the desired result?

  1. The external address is the proxy while internal routing selects the application.
  2. The required port reaches the correct listener on the mapped target.
  3. Return traffic follows an allowed path through the required stateful policy.
  4. Traffic destined for the prefix goes to that next hop.

Explanation

Correct Answer

C:

The observation that return traffic follows an allowed path through the required stateful policy is tied to the stated implementation of Topology asymmetric routing. It tests the requested outcome of investigate a connection where requests arrive but return packets take an unintended path instead of merely checking an unrelated component.

Incorrect Answers

A:

This observation evaluates Topology DNS to reverse proxy, which targets the distinct requirement to trace a user request that resolves a hostname to a reverse proxy rather than a backend. It therefore fails to validate the stated Topology asymmetric routing outcome: return traffic follows an allowed path through the required stateful policy.

B:

This observation evaluates Topology TCP port identification, which targets the distinct requirement to diagnose why client HTTPS reaches a firewall but not a service listening on TCP 8443. It therefore fails to validate the stated Topology asymmetric routing outcome: return traffic follows an allowed path through the required stateful policy.

D:

This observation evaluates Static route next hop, which targets the distinct requirement to reach a remote private subnet through a known adjacent router. It therefore fails to validate the stated Topology asymmetric routing outcome: return traffic follows an allowed path through the required stateful policy.

Question 740

In Northstar Logistics's production-readiness review, Topology asymmetric routing was selected to investigate a connection where requests arrive but return packets take an unintended path. Even if the expected outcome appears correct, which explicitly relevant limitation must the team include in its rollout and monitoring plan?

  1. A backend cannot be assumed publicly reachable merely because the proxy is.
  2. Allowing only TCP 443 does not automatically admit an app listening on 8443.
  3. The next hop must itself be reachable on a connected route.
  4. A successful forward-path trace does not prove the return direction is correct.

Explanation

Correct Answer

D:

For Topology asymmetric routing, the pertinent residual constraint is that a successful forward-path trace does not prove the return direction is correct. The implementation may satisfy investigate a connection where requests arrive but return packets take an unintended path, but this boundary must still be handled in operations.

Incorrect Answers

A:

This limitation is associated with Topology DNS to reverse proxy and its separate need to trace a user request that resolves a hostname to a reverse proxy rather than a backend. It is not the most direct operational boundary for the selected Topology asymmetric routing, whose relevant risk is that a successful forward-path trace does not prove the return direction is correct.

B:

This limitation is associated with Topology TCP port identification and its separate need to diagnose why client HTTPS reaches a firewall but not a service listening on TCP 8443. It is not the most direct operational boundary for the selected Topology asymmetric routing, whose relevant risk is that a successful forward-path trace does not prove the return direction is correct.

C:

This limitation is associated with Static route next hop and its separate need to reach a remote private subnet through a known adjacent router. It is not the most direct operational boundary for the selected Topology asymmetric routing, whose relevant risk is that a successful forward-path trace does not prove the return direction is correct.


DevNet Associate (DEVASC) (200-901) Practice Tests

Purchase Individually

200-901 Premium File

Premium File
200-901 Premium File
431 Q&A
$76.99$69.99

200-901 Training Video Course

Training Course
200-901 Training Video Course
11 Lectures
$27.49$24.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.