Question 700
In Pioneer Energy's production-readiness review, Longest-prefix route selection was selected to choose among routes with overlapping prefixes for a destination address. Even if the expected outcome appears correct, which explicitly relevant limitation must the team include in its rollout and monitoring plan?
- DNS success does not prove the network path or application port is open.
- Administrative distance is considered among candidate routes rather than replacing longest-prefix match.
- The final decimal octet alone is not enough without the prefix.
- The next hop must itself be reachable on a connected route.
Explanation
Correct Answer
B:For Longest-prefix route selection, the pertinent residual constraint is that administrative distance is considered among candidate routes rather than replacing longest-prefix match. The implementation may satisfy choose among routes with overlapping prefixes for a destination address, but this boundary must still be handled in operations.
Incorrect Answers
A:This limitation is associated with DNS name versus IP path and its separate need to differentiate successful IP reachability from failed hostname access. It is not the most direct operational boundary for the selected Longest-prefix route selection, whose relevant risk is that administrative distance is considered among candidate routes rather than replacing longest-prefix match.
C:This limitation is associated with Subnet host calculation and its separate need to determine whether two addresses with a /26 mask are in the same IPv4 network. It is not the most direct operational boundary for the selected Longest-prefix route selection, whose relevant risk is that administrative distance is considered among candidate routes rather than replacing longest-prefix match.
D:This limitation is associated with Static route next hop and its separate need to reach a remote private subnet through a known adjacent router. It is not the most direct operational boundary for the selected Longest-prefix route selection, whose relevant risk is that administrative distance is considered among candidate routes rather than replacing longest-prefix match.
Question 701
Evergreen Labs needs to determine whether two addresses with a /26 mask are in the same IPv4 network. The implementation team is comparing methods that address different problems in its Cisco-automation environment. Which technical approach directly satisfies the stated requirement?
- Longest-prefix route selection
- DNS name versus IP path
- Static route next hop
- Subnet host calculation
Explanation
Correct Answer
D:Subnet host calculation is the suitable approach here: apply the /26 mask and compare resulting network addresses. It addresses the requirement to determine whether two addresses with a /26 mask are in the same IPv4 network; acceptance can be checked when addresses with equal masked network bits are classified in the same prefix.
Incorrect Answers
A:Longest-prefix route selection addresses another requirement, namely to choose among routes with overlapping prefixes for a destination address. A typical way to do this is to select the route with the most-specific matching prefix; it does not directly address the stated need to determine whether two addresses with a /26 mask are in the same IPv4 network.
B:DNS name versus IP path addresses another requirement, namely to differentiate successful IP reachability from failed hostname access. A typical way to do this is to test destination IP connectivity and DNS resolution separately; it does not directly address the stated need to determine whether two addresses with a /26 mask are in the same IPv4 network.
C:Static route next hop addresses another requirement, namely to reach a remote private subnet through a known adjacent router. A typical way to do this is to install a route for the remote prefix with the reachable next hop; it does not directly address the stated need to determine whether two addresses with a /26 mask are in the same IPv4 network.
Question 702
During a change at Cobalt Manufacturing, engineers have selected Subnet host calculation because they need to determine whether two addresses with a /26 mask are in the same IPv4 network. Which concrete engineering action must be taken to implement the selected approach, rather than one of the nearby but different designs?
- Apply the /26 mask and compare resulting network addresses.
- Select the route with the most-specific matching prefix.
- Test destination IP connectivity and DNS resolution separately.
- Install a route for the remote prefix with the reachable next hop.
Explanation
Correct Answer
A:This action implements Subnet host calculation in the stated environment. To determine whether two addresses with a /26 mask are in the same IPv4 network, engineers should apply the /26 mask and compare resulting network addresses; the corresponding acceptance condition is that addresses with equal masked network bits are classified in the same prefix.
Incorrect Answers
B:This engineering action belongs to Longest-prefix route selection, where the purpose is to choose among routes with overlapping prefixes for a destination address. Implementing it would not establish Subnet host calculation for the stated requirement to determine whether two addresses with a /26 mask are in the same IPv4 network.
C:This engineering action belongs to DNS name versus IP path, where the purpose is to differentiate successful IP reachability from failed hostname access. Implementing it would not establish Subnet host calculation for the stated requirement to determine whether two addresses with a /26 mask are in the same IPv4 network.
D:This engineering action belongs to Static route next hop, where the purpose is to reach a remote private subnet through a known adjacent router. Implementing it would not establish Subnet host calculation for the stated requirement to determine whether two addresses with a /26 mask are in the same IPv4 network.
Question 703
Northstar Logistics has implemented Subnet host calculation by taking this action: apply the /26 mask and compare resulting network addresses. For the requirement to determine whether two addresses with a /26 mask are in the same IPv4 network, which actual observation most directly verifies the desired result?
- Packets use the matching route with the longest prefix length.
- Addresses with equal masked network bits are classified in the same prefix.
- IP works while unresolved name isolates a naming-side issue.
- Traffic destined for the prefix goes to that next hop.
Explanation
Correct Answer
B:The observation that addresses with equal masked network bits are classified in the same prefix is tied to the stated implementation of Subnet host calculation. It tests the requested outcome of determine whether two addresses with a /26 mask are in the same IPv4 network instead of merely checking an unrelated component.
Incorrect Answers
A:This observation evaluates Longest-prefix route selection, which targets the distinct requirement to choose among routes with overlapping prefixes for a destination address. It therefore fails to validate the stated Subnet host calculation outcome: addresses with equal masked network bits are classified in the same prefix.
C:This observation evaluates DNS name versus IP path, which targets the distinct requirement to differentiate successful IP reachability from failed hostname access. It therefore fails to validate the stated Subnet host calculation outcome: addresses with equal masked network bits are classified in the same prefix.
D:This observation evaluates Static route next hop, which targets the distinct requirement to reach a remote private subnet through a known adjacent router. It therefore fails to validate the stated Subnet host calculation outcome: addresses with equal masked network bits are classified in the same prefix.
Question 704
In Willow Data's production-readiness review, Subnet host calculation was selected to determine whether two addresses with a /26 mask are in the same IPv4 network. Even if the expected outcome appears correct, which explicitly relevant limitation must the team include in its rollout and monitoring plan?
- Administrative distance is considered among candidate routes rather than replacing longest-prefix match.
- DNS success does not prove the network path or application port is open.
- The final decimal octet alone is not enough without the prefix.
- The next hop must itself be reachable on a connected route.
Explanation
Correct Answer
C:For Subnet host calculation, the pertinent residual constraint is that the final decimal octet alone is not enough without the prefix. The implementation may satisfy determine whether two addresses with a /26 mask are in the same IPv4 network, but this boundary must still be handled in operations.
Incorrect Answers
A:This limitation is associated with Longest-prefix route selection and its separate need to choose among routes with overlapping prefixes for a destination address. It is not the most direct operational boundary for the selected Subnet host calculation, whose relevant risk is that the final decimal octet alone is not enough without the prefix.
B:This limitation is associated with DNS name versus IP path and its separate need to differentiate successful IP reachability from failed hostname access. It is not the most direct operational boundary for the selected Subnet host calculation, whose relevant risk is that the final decimal octet alone is not enough without the prefix.
D:This limitation is associated with Static route next hop and its separate need to reach a remote private subnet through a known adjacent router. It is not the most direct operational boundary for the selected Subnet host calculation, whose relevant risk is that the final decimal octet alone is not enough without the prefix.
Question 705
Ridgewell Research needs to reach a remote private subnet through a known adjacent router. The implementation team is comparing methods that address different problems in its Cisco-automation environment. Which technical approach directly satisfies the stated requirement?
- Static route next hop
- Private address reachability
- Longest-prefix route selection
- Subnet host calculation
Explanation
Correct Answer
A:Static route next hop is the suitable approach here: install a route for the remote prefix with the reachable next hop. It addresses the requirement to reach a remote private subnet through a known adjacent router; acceptance can be checked when traffic destined for the prefix goes to that next hop.
Incorrect Answers
B:Private address reachability addresses another requirement, namely to plan private RFC1918 addressing for an internal non-Internet-routed application. A typical way to do this is to use private IPv4 ranges with appropriate internal routing or translation at boundaries; it does not directly address the stated need to reach a remote private subnet through a known adjacent router.
C:Longest-prefix route selection addresses another requirement, namely to choose among routes with overlapping prefixes for a destination address. A typical way to do this is to select the route with the most-specific matching prefix; it does not directly address the stated need to reach a remote private subnet through a known adjacent router.
D:Subnet host calculation addresses another requirement, namely to determine whether two addresses with a /26 mask are in the same IPv4 network. A typical way to do this is to apply the /26 mask and compare resulting network addresses; it does not directly address the stated need to reach a remote private subnet through a known adjacent router.
Question 706
During a change at Linden Health, engineers have selected Static route next hop because they need to reach a remote private subnet through a known adjacent router. Which concrete engineering action must be taken to implement the selected approach, rather than one of the nearby but different designs?
- Use private IPv4 ranges with appropriate internal routing or translation at boundaries.
- Install a route for the remote prefix with the reachable next hop.
- Select the route with the most-specific matching prefix.
- Apply the /26 mask and compare resulting network addresses.
Explanation
Correct Answer
B:This action implements Static route next hop in the stated environment. To reach a remote private subnet through a known adjacent router, engineers should install a route for the remote prefix with the reachable next hop; the corresponding acceptance condition is that traffic destined for the prefix goes to that next hop.
Incorrect Answers
A:This engineering action belongs to Private address reachability, where the purpose is to plan private RFC1918 addressing for an internal non-Internet-routed application. Implementing it would not establish Static route next hop for the stated requirement to reach a remote private subnet through a known adjacent router.
C:This engineering action belongs to Longest-prefix route selection, where the purpose is to choose among routes with overlapping prefixes for a destination address. Implementing it would not establish Static route next hop for the stated requirement to reach a remote private subnet through a known adjacent router.
D:This engineering action belongs to Subnet host calculation, where the purpose is to determine whether two addresses with a /26 mask are in the same IPv4 network. Implementing it would not establish Static route next hop for the stated requirement to reach a remote private subnet through a known adjacent router.
Question 707
Metro Services has implemented Static route next hop by taking this action: install a route for the remote prefix with the reachable next hop. For the requirement to reach a remote private subnet through a known adjacent router, which actual observation most directly verifies the desired result?
- Internal addresses are not expected to route directly across public Internet.
- Packets use the matching route with the longest prefix length.
- Traffic destined for the prefix goes to that next hop.
- Addresses with equal masked network bits are classified in the same prefix.
Explanation
Correct Answer
C:The observation that traffic destined for the prefix goes to that next hop is tied to the stated implementation of Static route next hop. It tests the requested outcome of reach a remote private subnet through a known adjacent router instead of merely checking an unrelated component.
Incorrect Answers
A:This observation evaluates Private address reachability, which targets the distinct requirement to plan private RFC1918 addressing for an internal non-Internet-routed application. It therefore fails to validate the stated Static route next hop outcome: traffic destined for the prefix goes to that next hop.
B:This observation evaluates Longest-prefix route selection, which targets the distinct requirement to choose among routes with overlapping prefixes for a destination address. It therefore fails to validate the stated Static route next hop outcome: traffic destined for the prefix goes to that next hop.
D:This observation evaluates Subnet host calculation, which targets the distinct requirement to determine whether two addresses with a /26 mask are in the same IPv4 network. It therefore fails to validate the stated Static route next hop outcome: traffic destined for the prefix goes to that next hop.
Question 708
In Highland Analytics's production-readiness review, Static route next hop was selected to reach a remote private subnet through a known adjacent router. Even if the expected outcome appears correct, which explicitly relevant limitation must the team include in its rollout and monitoring plan?
- Private addressing is not a security boundary without access controls.
- Administrative distance is considered among candidate routes rather than replacing longest-prefix match.
- The final decimal octet alone is not enough without the prefix.
- The next hop must itself be reachable on a connected route.
Explanation
Correct Answer
D:For Static route next hop, the pertinent residual constraint is that the next hop must itself be reachable on a connected route. The implementation may satisfy reach a remote private subnet through a known adjacent router, but this boundary must still be handled in operations.
Incorrect Answers
A:This limitation is associated with Private address reachability and its separate need to plan private RFC1918 addressing for an internal non-Internet-routed application. It is not the most direct operational boundary for the selected Static route next hop, whose relevant risk is that the next hop must itself be reachable on a connected route.
B:This limitation is associated with Longest-prefix route selection and its separate need to choose among routes with overlapping prefixes for a destination address. It is not the most direct operational boundary for the selected Static route next hop, whose relevant risk is that the next hop must itself be reachable on a connected route.
C:This limitation is associated with Subnet host calculation and its separate need to determine whether two addresses with a /26 mask are in the same IPv4 network. It is not the most direct operational boundary for the selected Static route next hop, whose relevant risk is that the next hop must itself be reachable on a connected route.
Question 709
Arbor Financial needs to plan private RFC1918 addressing for an internal non-Internet-routed application. The implementation team is comparing methods that address different problems in its Cisco-automation environment. Which technical approach directly satisfies the stated requirement?
- Default gateway use
- Private address reachability
- Static route next hop
- Longest-prefix route selection
Explanation
Correct Answer
B:Private address reachability is the suitable approach here: use private IPv4 ranges with appropriate internal routing or translation at boundaries. It addresses the requirement to plan private RFC1918 addressing for an internal non-Internet-routed application; acceptance can be checked when internal addresses are not expected to route directly across public Internet.
Incorrect Answers
A:Default gateway use addresses another requirement, namely to send traffic from a host to an IP subnet outside its directly connected prefix. A typical way to do this is to forward the packet to the configured local default gateway; it does not directly address the stated need to plan private RFC1918 addressing for an internal non-Internet-routed application.
C:Static route next hop addresses another requirement, namely to reach a remote private subnet through a known adjacent router. A typical way to do this is to install a route for the remote prefix with the reachable next hop; it does not directly address the stated need to plan private RFC1918 addressing for an internal non-Internet-routed application.
D:Longest-prefix route selection addresses another requirement, namely to choose among routes with overlapping prefixes for a destination address. A typical way to do this is to select the route with the most-specific matching prefix; it does not directly address the stated need to plan private RFC1918 addressing for an internal non-Internet-routed application.
Question 710
During a change at Keystone Media, engineers have selected Private address reachability because they need to plan private RFC1918 addressing for an internal non-Internet-routed application. Which concrete engineering action must be taken to implement the selected approach, rather than one of the nearby but different designs?
- Forward the packet to the configured local default gateway.
- Install a route for the remote prefix with the reachable next hop.
- Use private IPv4 ranges with appropriate internal routing or translation at boundaries.
- Select the route with the most-specific matching prefix.
Explanation
Correct Answer
C:This action implements Private address reachability in the stated environment. To plan private RFC1918 addressing for an internal non-Internet-routed application, engineers should use private IPv4 ranges with appropriate internal routing or translation at boundaries; the corresponding acceptance condition is that internal addresses are not expected to route directly across public Internet.
Incorrect Answers
A:This engineering action belongs to Default gateway use, where the purpose is to send traffic from a host to an IP subnet outside its directly connected prefix. Implementing it would not establish Private address reachability for the stated requirement to plan private RFC1918 addressing for an internal non-Internet-routed application.
B:This engineering action belongs to Static route next hop, where the purpose is to reach a remote private subnet through a known adjacent router. Implementing it would not establish Private address reachability for the stated requirement to plan private RFC1918 addressing for an internal non-Internet-routed application.
D:This engineering action belongs to Longest-prefix route selection, where the purpose is to choose among routes with overlapping prefixes for a destination address. Implementing it would not establish Private address reachability for the stated requirement to plan private RFC1918 addressing for an internal non-Internet-routed application.
DevNet Associate (DEVASC) (200-901) Practice Tests