Question 680
In Metro Services's production-readiness review, Sequence diagram asynchronous response was selected to interpret a diagram where API returns task ID then client polls a status endpoint. Even if the expected outcome appears correct, which explicitly relevant limitation must the team include in its rollout and monitoring plan?
- The initial 202 response does not imply successful task completion.
- Exit status is not the same as parsing arbitrary stdout text.
- Checking presence alone does not validate the token's permission scope.
- Models can differ across IOS XE releases and optional feature support.
Explanation
Correct Answer
A:For Sequence diagram asynchronous response, the pertinent residual constraint is that the initial 202 response does not imply successful task completion. The implementation may satisfy interpret a diagram where API returns task ID then client polls a status endpoint, but this boundary must still be handled in operations.
Incorrect Answers
B:This limitation is associated with Bash exit-status branch and its separate need to interpret a script that uses if command; then ... else ... fi. It is not the most direct operational boundary for the selected Sequence diagram asynchronous response, whose relevant risk is that the initial 202 response does not imply successful task completion.
C:This limitation is associated with Bash environment check and its separate need to interpret a script that tests a required token variable before contacting an API. It is not the most direct operational boundary for the selected Sequence diagram asynchronous response, whose relevant risk is that the initial 202 response does not imply successful task completion.
D:This limitation is associated with Schema-driven automation and its separate need to generate device configuration from defined YANG objects rather than arbitrary screen-scraping. It is not the most direct operational boundary for the selected Sequence diagram asynchronous response, whose relevant risk is that the initial 202 response does not imply successful task completion.
Question 681
Brookfield Systems needs to identify the local link-layer destination for a frame sent through an Ethernet switch. The implementation team is comparing methods that address different problems in its Cisco-automation environment. Which technical approach directly satisfies the stated requirement?
- VLAN segmentation
- 802.1Q trunk tagging
- MAC address on LAN
- HTTPS management port
Explanation
Correct Answer
C:MAC address on LAN is the suitable approach here: use the destination MAC address on the relevant Ethernet segment. It addresses the requirement to identify the local link-layer destination for a frame sent through an Ethernet switch; acceptance can be checked when the switch forwards frames according to learned MAC-to-port entries.
Incorrect Answers
A:VLAN segmentation addresses another requirement, namely to keep lab and production broadcasts logically separated on one switching infrastructure. A typical way to do this is to assign access ports to distinct VLANs and route only through approved Layer 3 policy; it does not directly address the stated need to identify the local link-layer destination for a frame sent through an Ethernet switch.
B:802.1Q trunk tagging addresses another requirement, namely to carry two VLANs across a switch-to-switch link while retaining VLAN membership. A typical way to do this is to configure an appropriate trunk with the required VLAN tags allowed; it does not directly address the stated need to identify the local link-layer destination for a frame sent through an Ethernet switch.
D:HTTPS management port addresses another requirement, namely to identify the default secure web API transport on a standard endpoint. A typical way to do this is to use TCP 443 for HTTPS when no custom port is defined; it does not directly address the stated need to identify the local link-layer destination for a frame sent through an Ethernet switch.
Question 682
During a change at Arbor Financial, engineers have selected MAC address on LAN because they need to identify the local link-layer destination for a frame sent through an Ethernet switch. Which concrete engineering action must be taken to implement the selected approach, rather than one of the nearby but different designs?
- Assign access ports to distinct VLANs and route only through approved Layer 3 policy.
- Configure an appropriate trunk with the required VLAN tags allowed.
- Use TCP 443 for HTTPS when no custom port is defined.
- Use the destination MAC address on the relevant Ethernet segment.
Explanation
Correct Answer
D:This action implements MAC address on LAN in the stated environment. To identify the local link-layer destination for a frame sent through an Ethernet switch, engineers should use the destination MAC address on the relevant Ethernet segment; the corresponding acceptance condition is that the switch forwards frames according to learned MAC-to-port entries.
Incorrect Answers
A:This engineering action belongs to VLAN segmentation, where the purpose is to keep lab and production broadcasts logically separated on one switching infrastructure. Implementing it would not establish MAC address on LAN for the stated requirement to identify the local link-layer destination for a frame sent through an Ethernet switch.
B:This engineering action belongs to 802.1Q trunk tagging, where the purpose is to carry two VLANs across a switch-to-switch link while retaining VLAN membership. Implementing it would not establish MAC address on LAN for the stated requirement to identify the local link-layer destination for a frame sent through an Ethernet switch.
C:This engineering action belongs to HTTPS management port, where the purpose is to identify the default secure web API transport on a standard endpoint. Implementing it would not establish MAC address on LAN for the stated requirement to identify the local link-layer destination for a frame sent through an Ethernet switch.
Question 683
Keystone Media has implemented MAC address on LAN by taking this action: use the destination MAC address on the relevant Ethernet segment. For the requirement to identify the local link-layer destination for a frame sent through an Ethernet switch, which actual observation most directly verifies the desired result?
- The switch forwards frames according to learned MAC-to-port entries.
- Layer 2 broadcasts remain inside each assigned VLAN.
- Traffic for each allowed VLAN retains its VLAN identity on the shared link.
- TLS negotiation occurs on the intended HTTPS listener.
Explanation
Correct Answer
A:The observation that the switch forwards frames according to learned MAC-to-port entries is tied to the stated implementation of MAC address on LAN. It tests the requested outcome of identify the local link-layer destination for a frame sent through an Ethernet switch instead of merely checking an unrelated component.
Incorrect Answers
B:This observation evaluates VLAN segmentation, which targets the distinct requirement to keep lab and production broadcasts logically separated on one switching infrastructure. It therefore fails to validate the stated MAC address on LAN outcome: the switch forwards frames according to learned MAC-to-port entries.
C:This observation evaluates 802.1Q trunk tagging, which targets the distinct requirement to carry two VLANs across a switch-to-switch link while retaining VLAN membership. It therefore fails to validate the stated MAC address on LAN outcome: the switch forwards frames according to learned MAC-to-port entries.
D:This observation evaluates HTTPS management port, which targets the distinct requirement to identify the default secure web API transport on a standard endpoint. It therefore fails to validate the stated MAC address on LAN outcome: the switch forwards frames according to learned MAC-to-port entries.
Question 684
In Evergreen Labs's production-readiness review, MAC address on LAN was selected to identify the local link-layer destination for a frame sent through an Ethernet switch. Even if the expected outcome appears correct, which explicitly relevant limitation must the team include in its rollout and monitoring plan?
- VLAN separation does not encrypt traffic or replace Layer 3 filtering.
- MAC addresses alone do not identify a destination across routed IP networks.
- A trunk does not make two separate VLANs a common IP subnet.
- TCP 443 being open does not prove a valid certificate or permitted API call.
Explanation
Correct Answer
B:For MAC address on LAN, the pertinent residual constraint is that MAC addresses alone do not identify a destination across routed IP networks. The implementation may satisfy identify the local link-layer destination for a frame sent through an Ethernet switch, but this boundary must still be handled in operations.
Incorrect Answers
A:This limitation is associated with VLAN segmentation and its separate need to keep lab and production broadcasts logically separated on one switching infrastructure. It is not the most direct operational boundary for the selected MAC address on LAN, whose relevant risk is that MAC addresses alone do not identify a destination across routed IP networks.
C:This limitation is associated with 802.1Q trunk tagging and its separate need to carry two VLANs across a switch-to-switch link while retaining VLAN membership. It is not the most direct operational boundary for the selected MAC address on LAN, whose relevant risk is that MAC addresses alone do not identify a destination across routed IP networks.
D:This limitation is associated with HTTPS management port and its separate need to identify the default secure web API transport on a standard endpoint. It is not the most direct operational boundary for the selected MAC address on LAN, whose relevant risk is that MAC addresses alone do not identify a destination across routed IP networks.
Question 685
Meridian Transit needs to keep lab and production broadcasts logically separated on one switching infrastructure. The implementation team is comparing methods that address different problems in its Cisco-automation environment. Which technical approach directly satisfies the stated requirement?
- MAC address on LAN
- 802.1Q trunk tagging
- Static route next hop
- VLAN segmentation
Explanation
Correct Answer
D:VLAN segmentation is the suitable approach here: assign access ports to distinct VLANs and route only through approved Layer 3 policy. It addresses the requirement to keep lab and production broadcasts logically separated on one switching infrastructure; acceptance can be checked when Layer 2 broadcasts remain inside each assigned VLAN.
Incorrect Answers
A:MAC address on LAN addresses another requirement, namely to identify the local link-layer destination for a frame sent through an Ethernet switch. A typical way to do this is to use the destination MAC address on the relevant Ethernet segment; it does not directly address the stated need to keep lab and production broadcasts logically separated on one switching infrastructure.
B:802.1Q trunk tagging addresses another requirement, namely to carry two VLANs across a switch-to-switch link while retaining VLAN membership. A typical way to do this is to configure an appropriate trunk with the required VLAN tags allowed; it does not directly address the stated need to keep lab and production broadcasts logically separated on one switching infrastructure.
C:Static route next hop addresses another requirement, namely to reach a remote private subnet through a known adjacent router. A typical way to do this is to install a route for the remote prefix with the reachable next hop; it does not directly address the stated need to keep lab and production broadcasts logically separated on one switching infrastructure.
Question 686
During a change at Atlas Retail, engineers have selected VLAN segmentation because they need to keep lab and production broadcasts logically separated on one switching infrastructure. Which concrete engineering action must be taken to implement the selected approach, rather than one of the nearby but different designs?
- Assign access ports to distinct VLANs and route only through approved Layer 3 policy.
- Use the destination MAC address on the relevant Ethernet segment.
- Configure an appropriate trunk with the required VLAN tags allowed.
- Install a route for the remote prefix with the reachable next hop.
Explanation
Correct Answer
A:This action implements VLAN segmentation in the stated environment. To keep lab and production broadcasts logically separated on one switching infrastructure, engineers should assign access ports to distinct VLANs and route only through approved Layer 3 policy; the corresponding acceptance condition is that Layer 2 broadcasts remain inside each assigned VLAN.
Incorrect Answers
B:This engineering action belongs to MAC address on LAN, where the purpose is to identify the local link-layer destination for a frame sent through an Ethernet switch. Implementing it would not establish VLAN segmentation for the stated requirement to keep lab and production broadcasts logically separated on one switching infrastructure.
C:This engineering action belongs to 802.1Q trunk tagging, where the purpose is to carry two VLANs across a switch-to-switch link while retaining VLAN membership. Implementing it would not establish VLAN segmentation for the stated requirement to keep lab and production broadcasts logically separated on one switching infrastructure.
D:This engineering action belongs to Static route next hop, where the purpose is to reach a remote private subnet through a known adjacent router. Implementing it would not establish VLAN segmentation for the stated requirement to keep lab and production broadcasts logically separated on one switching infrastructure.
Question 687
Coastal Operations has implemented VLAN segmentation by taking this action: assign access ports to distinct VLANs and route only through approved Layer 3 policy. For the requirement to keep lab and production broadcasts logically separated on one switching infrastructure, which actual observation most directly verifies the desired result?
- The switch forwards frames according to learned MAC-to-port entries.
- Layer 2 broadcasts remain inside each assigned VLAN.
- Traffic for each allowed VLAN retains its VLAN identity on the shared link.
- Traffic destined for the prefix goes to that next hop.
Explanation
Correct Answer
B:The observation that Layer 2 broadcasts remain inside each assigned VLAN is tied to the stated implementation of VLAN segmentation. It tests the requested outcome of keep lab and production broadcasts logically separated on one switching infrastructure instead of merely checking an unrelated component.
Incorrect Answers
A:This observation evaluates MAC address on LAN, which targets the distinct requirement to identify the local link-layer destination for a frame sent through an Ethernet switch. It therefore fails to validate the stated VLAN segmentation outcome: Layer 2 broadcasts remain inside each assigned VLAN.
C:This observation evaluates 802.1Q trunk tagging, which targets the distinct requirement to carry two VLANs across a switch-to-switch link while retaining VLAN membership. It therefore fails to validate the stated VLAN segmentation outcome: Layer 2 broadcasts remain inside each assigned VLAN.
D:This observation evaluates Static route next hop, which targets the distinct requirement to reach a remote private subnet through a known adjacent router. It therefore fails to validate the stated VLAN segmentation outcome: Layer 2 broadcasts remain inside each assigned VLAN.
Question 688
In Ridgewell Research's production-readiness review, VLAN segmentation was selected to keep lab and production broadcasts logically separated on one switching infrastructure. Even if the expected outcome appears correct, which explicitly relevant limitation must the team include in its rollout and monitoring plan?
- MAC addresses alone do not identify a destination across routed IP networks.
- A trunk does not make two separate VLANs a common IP subnet.
- VLAN separation does not encrypt traffic or replace Layer 3 filtering.
- The next hop must itself be reachable on a connected route.
Explanation
Correct Answer
C:For VLAN segmentation, the pertinent residual constraint is that VLAN separation does not encrypt traffic or replace Layer 3 filtering. The implementation may satisfy keep lab and production broadcasts logically separated on one switching infrastructure, but this boundary must still be handled in operations.
Incorrect Answers
A:This limitation is associated with MAC address on LAN and its separate need to identify the local link-layer destination for a frame sent through an Ethernet switch. It is not the most direct operational boundary for the selected VLAN segmentation, whose relevant risk is that VLAN separation does not encrypt traffic or replace Layer 3 filtering.
B:This limitation is associated with 802.1Q trunk tagging and its separate need to carry two VLANs across a switch-to-switch link while retaining VLAN membership. It is not the most direct operational boundary for the selected VLAN segmentation, whose relevant risk is that VLAN separation does not encrypt traffic or replace Layer 3 filtering.
D:This limitation is associated with Static route next hop and its separate need to reach a remote private subnet through a known adjacent router. It is not the most direct operational boundary for the selected VLAN segmentation, whose relevant risk is that VLAN separation does not encrypt traffic or replace Layer 3 filtering.
Question 689
Summit University needs to carry two VLANs across a switch-to-switch link while retaining VLAN membership. The implementation team is comparing methods that address different problems in its Cisco-automation environment. Which technical approach directly satisfies the stated requirement?
- 802.1Q trunk tagging
- MAC address on LAN
- VLAN segmentation
- SSH management port
Explanation
Correct Answer
A:802.1Q trunk tagging is the suitable approach here: configure an appropriate trunk with the required VLAN tags allowed. It addresses the requirement to carry two VLANs across a switch-to-switch link while retaining VLAN membership; acceptance can be checked when traffic for each allowed VLAN retains its VLAN identity on the shared link.
Incorrect Answers
B:MAC address on LAN addresses another requirement, namely to identify the local link-layer destination for a frame sent through an Ethernet switch. A typical way to do this is to use the destination MAC address on the relevant Ethernet segment; it does not directly address the stated need to carry two VLANs across a switch-to-switch link while retaining VLAN membership.
C:VLAN segmentation addresses another requirement, namely to keep lab and production broadcasts logically separated on one switching infrastructure. A typical way to do this is to assign access ports to distinct VLANs and route only through approved Layer 3 policy; it does not directly address the stated need to carry two VLANs across a switch-to-switch link while retaining VLAN membership.
D:SSH management port addresses another requirement, namely to identify the default TCP service used by SSH network administration. A typical way to do this is to use TCP port 22 unless the managed device is explicitly configured otherwise; it does not directly address the stated need to carry two VLANs across a switch-to-switch link while retaining VLAN membership.
Question 690
During a change at Pioneer Energy, engineers have selected 802.1Q trunk tagging because they need to carry two VLANs across a switch-to-switch link while retaining VLAN membership. Which concrete engineering action must be taken to implement the selected approach, rather than one of the nearby but different designs?
- Use the destination MAC address on the relevant Ethernet segment.
- Configure an appropriate trunk with the required VLAN tags allowed.
- Assign access ports to distinct VLANs and route only through approved Layer 3 policy.
- Use TCP port 22 unless the managed device is explicitly configured otherwise.
Explanation
Correct Answer
B:This action implements 802.1Q trunk tagging in the stated environment. To carry two VLANs across a switch-to-switch link while retaining VLAN membership, engineers should configure an appropriate trunk with the required VLAN tags allowed; the corresponding acceptance condition is that traffic for each allowed VLAN retains its VLAN identity on the shared link.
Incorrect Answers
A:This engineering action belongs to MAC address on LAN, where the purpose is to identify the local link-layer destination for a frame sent through an Ethernet switch. Implementing it would not establish 802.1Q trunk tagging for the stated requirement to carry two VLANs across a switch-to-switch link while retaining VLAN membership.
C:This engineering action belongs to VLAN segmentation, where the purpose is to keep lab and production broadcasts logically separated on one switching infrastructure. Implementing it would not establish 802.1Q trunk tagging for the stated requirement to carry two VLANs across a switch-to-switch link while retaining VLAN membership.
D:This engineering action belongs to SSH management port, where the purpose is to identify the default TCP service used by SSH network administration. Implementing it would not establish 802.1Q trunk tagging for the stated requirement to carry two VLANs across a switch-to-switch link while retaining VLAN membership.
DevNet Associate (DEVASC) (200-901) Practice Tests