Pass Your Juniper JN0-664 Exam Easy!

Juniper JN0-664 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

JN0-664 Premium VCE File

Juniper JN0-664 Premium File

96 Questions & Answers

Last Update: Oct 12, 2026

$69.99

JN0-664 Bundle gives you unlimited access to "JN0-664" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
JN0-664 Premium VCE File
Juniper JN0-664 Premium File

96 Questions & Answers

Last Update: Oct 12, 2026

$69.99

Juniper JN0-664 Exam Bundle gives you unlimited access to "JN0-664" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

Juniper JN0-664 Practice Test 99

Question 980

During a backbone POP acceptance review, an HPE Juniper Networking engineer investigates this situation: A pseudowire itself is up, but local customer traffic never enters it because CE frames arrive on a logical unit not attached to the service instance. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Include service label disposition checks in multi-tenant label-table audits.
  2. Use a two-ended pseudowire service record for every provisioned VC.
  3. Test broadcast storm containment before admitting additional VPLS PEs.
  4. Cross-check physical port, VLAN tag and logical unit against customer acceptance drawings.

Explanation

Correct Answer

D:

Cross-check physical port, VLAN tag and logical unit against customer acceptance drawings. The control limits repetition of the described root condition: A signaled pseudowire only carries CE frames that enter its actual local attachment circuit. During audits, confirm: Packet counters on the intended unit and pseudowire both increase for a test frame.

Incorrect Answers

A:

Include service label disposition checks in multi-tenant label-table audits. This is a plausible preventive practice for a different Layer 2 VPNs condition, specifically L2VPN service-label swapped. The inner pseudowire service label identifies the Layer 2 circuit, while the outer MPLS label identifies transport. In this scenario, however, the distinguishing issue is L2VPN attachment interface wrong unit and the confirming observation is: Packet counters on the intended unit and pseudowire both increase for a test frame.

B:

Use a two-ended pseudowire service record for every provisioned VC. This is a plausible preventive practice for a different Layer 2 VPNs condition, specifically LDP pseudowire VC ID mismatch. An LDP-signaled point-to-point Layer 2 circuit needs compatible pseudowire identity and service parameters on both PEs. In this scenario, however, the distinguishing issue is L2VPN attachment interface wrong unit and the confirming observation is: Packet counters on the intended unit and pseudowire both increase for a test frame.

C:

Test broadcast storm containment before admitting additional VPLS PEs. This is a plausible preventive practice for a different Layer 2 VPNs condition, specifically VPLS split-horizon protection. VPLS needs loop-prevention controls such as split-horizon behavior when forwarding between remote pseudowires. In this scenario, however, the distinguishing issue is L2VPN attachment interface wrong unit and the confirming observation is: Packet counters on the intended unit and pseudowire both increase for a test frame.

Question 981

During an edge-to-core validation, an HPE Juniper Networking engineer investigates this situation: The MPLS tunnel reaches the correct remote PE but it forwards the customer frame into the wrong pseudowire instance due to an incorrect service-label binding. Which targeted check most directly distinguishes the likely cause before a configuration change?

  1. Inspect egress service label-to-circuit association independently of the outer transport label.
  2. Compare ingress VLAN unit counters and the specific L2VPN instance's attachment configuration.
  3. Inspect attachment circuit type and the pseudowire's configured interworking mode.
  4. Inspect split-horizon forwarding treatment for traffic received from VPLS pseudowires.

Explanation

Correct Answer

A:

Inspect egress service label-to-circuit association independently of the outer transport label. This check examines the decisive condition for L2VPN service-label swapped before any unrelated changes are made. The underlying mechanism is: The inner pseudowire service label identifies the Layer 2 circuit, while the outer MPLS label identifies transport. The confirming observation is: The destination PE maps the incoming service label to the intended customer attachment.

Incorrect Answers

B:

Compare ingress VLAN unit counters and the specific L2VPN instance's attachment configuration. This is a plausible diagnostic check for a different Layer 2 VPNs condition, specifically L2VPN attachment interface wrong unit. A signaled pseudowire only carries CE frames that enter its actual local attachment circuit. In this scenario, however, the distinguishing issue is L2VPN service-label swapped and the confirming observation is: The destination PE maps the incoming service label to the intended customer attachment.

C:

Inspect attachment circuit type and the pseudowire's configured interworking mode. This is a plausible diagnostic check for a different Layer 2 VPNs condition, specifically Layer 2 interworking mismatch. Different Layer 2 attachment encapsulations may require explicit compatible interworking, not an assumption that raw frames are identical. In this scenario, however, the distinguishing issue is L2VPN service-label swapped and the confirming observation is: The destination PE maps the incoming service label to the intended customer attachment.

D:

Inspect split-horizon forwarding treatment for traffic received from VPLS pseudowires. This is a plausible diagnostic check for a different Layer 2 VPNs condition, specifically VPLS split-horizon protection. VPLS needs loop-prevention controls such as split-horizon behavior when forwarding between remote pseudowires. In this scenario, however, the distinguishing issue is L2VPN service-label swapped and the confirming observation is: The destination PE maps the incoming service label to the intended customer attachment.

Question 982

During a high-availability validation, an HPE Juniper Networking engineer investigates this situation: The MPLS tunnel reaches the correct remote PE but it forwards the customer frame into the wrong pseudowire instance due to an incorrect service-label binding. Which routing or service mechanism best explains the reported behavior?

  1. A signaled pseudowire only carries CE frames that enter its actual local attachment circuit.
  2. The inner pseudowire service label identifies the Layer 2 circuit, while the outer MPLS label identifies transport.
  3. Different Layer 2 attachment encapsulations may require explicit compatible interworking, not an assumption that raw frames are identical.
  4. VPLS needs loop-prevention controls such as split-horizon behavior when forwarding between remote pseudowires.

Explanation

Correct Answer

B:

The inner pseudowire service label identifies the Layer 2 circuit, while the outer MPLS label identifies transport. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: The destination PE maps the incoming service label to the intended customer attachment. The targeted correction is: Repair the affected service label mapping and circuit signaling instead of changing healthy core IGP paths.

Incorrect Answers

A:

A signaled pseudowire only carries CE frames that enter its actual local attachment circuit. This is a plausible protocol explanation for a different Layer 2 VPNs condition, specifically L2VPN attachment interface wrong unit. A signaled pseudowire only carries CE frames that enter its actual local attachment circuit. In this scenario, however, the distinguishing issue is L2VPN service-label swapped and the confirming observation is: The destination PE maps the incoming service label to the intended customer attachment.

C:

Different Layer 2 attachment encapsulations may require explicit compatible interworking, not an assumption that raw frames are identical. This is a plausible protocol explanation for a different Layer 2 VPNs condition, specifically Layer 2 interworking mismatch. Different Layer 2 attachment encapsulations may require explicit compatible interworking, not an assumption that raw frames are identical. In this scenario, however, the distinguishing issue is L2VPN service-label swapped and the confirming observation is: The destination PE maps the incoming service label to the intended customer attachment.

D:

VPLS needs loop-prevention controls such as split-horizon behavior when forwarding between remote pseudowires. This is a plausible protocol explanation for a different Layer 2 VPNs condition, specifically VPLS split-horizon protection. VPLS needs loop-prevention controls such as split-horizon behavior when forwarding between remote pseudowires. In this scenario, however, the distinguishing issue is L2VPN service-label swapped and the confirming observation is: The destination PE maps the incoming service label to the intended customer attachment.

Question 983

During a Junos routing maintenance review, an HPE Juniper Networking engineer investigates this situation: The MPLS tunnel reaches the correct remote PE but it forwards the customer frame into the wrong pseudowire instance due to an incorrect service-label binding. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?

  1. Packet counters on the intended unit and pseudowire both increase for a test frame.
  2. The CE-facing frames are correctly interpreted at the remote attachment after supported interworking.
  3. The destination PE maps the incoming service label to the intended customer attachment.
  4. Test frames cross the intended CE attachments once without repeated amplification.

Explanation

Correct Answer

C:

The destination PE maps the incoming service label to the intended customer attachment. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: The inner pseudowire service label identifies the Layer 2 circuit, while the outer MPLS label identifies transport.

Incorrect Answers

A:

Packet counters on the intended unit and pseudowire both increase for a test frame. This is a plausible observed evidence for a different Layer 2 VPNs condition, specifically L2VPN attachment interface wrong unit. A signaled pseudowire only carries CE frames that enter its actual local attachment circuit. In this scenario, however, the distinguishing issue is L2VPN service-label swapped and the confirming observation is: The destination PE maps the incoming service label to the intended customer attachment.

B:

The CE-facing frames are correctly interpreted at the remote attachment after supported interworking. This is a plausible observed evidence for a different Layer 2 VPNs condition, specifically Layer 2 interworking mismatch. Different Layer 2 attachment encapsulations may require explicit compatible interworking, not an assumption that raw frames are identical. In this scenario, however, the distinguishing issue is L2VPN service-label swapped and the confirming observation is: The destination PE maps the incoming service label to the intended customer attachment.

D:

Test frames cross the intended CE attachments once without repeated amplification. This is a plausible observed evidence for a different Layer 2 VPNs condition, specifically VPLS split-horizon protection. VPLS needs loop-prevention controls such as split-horizon behavior when forwarding between remote pseudowires. In this scenario, however, the distinguishing issue is L2VPN service-label swapped and the confirming observation is: The destination PE maps the incoming service label to the intended customer attachment.

Question 984

During a multisite network cutover, an HPE Juniper Networking engineer investigates this situation: The MPLS tunnel reaches the correct remote PE but it forwards the customer frame into the wrong pseudowire instance due to an incorrect service-label binding. Which response or focused corrective action best addresses this situation without changing unrelated components?

  1. Bind the correct VLAN logical unit or service interface to the L2VPN instance.
  2. Use a supported pseudowire interworking configuration or adapt the service at the boundary.
  3. Restore the supported VPLS split-horizon or equivalent loop-free topology behavior.
  4. Repair the affected service label mapping and circuit signaling instead of changing healthy core IGP paths.

Explanation

Correct Answer

D:

Repair the affected service label mapping and circuit signaling instead of changing healthy core IGP paths. The change addresses the root behavior described here: The inner pseudowire service label identifies the Layer 2 circuit, while the outer MPLS label identifies transport. Verify success with: The destination PE maps the incoming service label to the intended customer attachment.

Incorrect Answers

A:

Bind the correct VLAN logical unit or service interface to the L2VPN instance. This is a plausible configuration or operational fix for a different Layer 2 VPNs condition, specifically L2VPN attachment interface wrong unit. A signaled pseudowire only carries CE frames that enter its actual local attachment circuit. In this scenario, however, the distinguishing issue is L2VPN service-label swapped and the confirming observation is: The destination PE maps the incoming service label to the intended customer attachment.

B:

Use a supported pseudowire interworking configuration or adapt the service at the boundary. This is a plausible configuration or operational fix for a different Layer 2 VPNs condition, specifically Layer 2 interworking mismatch. Different Layer 2 attachment encapsulations may require explicit compatible interworking, not an assumption that raw frames are identical. In this scenario, however, the distinguishing issue is L2VPN service-label swapped and the confirming observation is: The destination PE maps the incoming service label to the intended customer attachment.

C:

Restore the supported VPLS split-horizon or equivalent loop-free topology behavior. This is a plausible configuration or operational fix for a different Layer 2 VPNs condition, specifically VPLS split-horizon protection. VPLS needs loop-prevention controls such as split-horizon behavior when forwarding between remote pseudowires. In this scenario, however, the distinguishing issue is L2VPN service-label swapped and the confirming observation is: The destination PE maps the incoming service label to the intended customer attachment.

Question 985

During a metro aggregation incident, an HPE Juniper Networking engineer investigates this situation: The MPLS tunnel reaches the correct remote PE but it forwards the customer frame into the wrong pseudowire instance due to an incorrect service-label binding. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Include service label disposition checks in multi-tenant label-table audits.
  2. Cross-check physical port, VLAN tag and logical unit against customer acceptance drawings.
  3. Qualify every attachment encapsulation before approving mixed-media L2 VPN provisioning.
  4. Audit VPN identifiers before consolidating L2VPN routes on shared reflectors.

Explanation

Correct Answer

A:

Include service label disposition checks in multi-tenant label-table audits. The control limits repetition of the described root condition: The inner pseudowire service label identifies the Layer 2 circuit, while the outer MPLS label identifies transport. During audits, confirm: The destination PE maps the incoming service label to the intended customer attachment.

Incorrect Answers

B:

Cross-check physical port, VLAN tag and logical unit against customer acceptance drawings. This is a plausible preventive practice for a different Layer 2 VPNs condition, specifically L2VPN attachment interface wrong unit. A signaled pseudowire only carries CE frames that enter its actual local attachment circuit. In this scenario, however, the distinguishing issue is L2VPN service-label swapped and the confirming observation is: The destination PE maps the incoming service label to the intended customer attachment.

C:

Qualify every attachment encapsulation before approving mixed-media L2 VPN provisioning. This is a plausible preventive practice for a different Layer 2 VPNs condition, specifically Layer 2 interworking mismatch. Different Layer 2 attachment encapsulations may require explicit compatible interworking, not an assumption that raw frames are identical. In this scenario, however, the distinguishing issue is L2VPN service-label swapped and the confirming observation is: The destination PE maps the incoming service label to the intended customer attachment.

D:

Audit VPN identifiers before consolidating L2VPN routes on shared reflectors. This is a plausible preventive practice for a different Layer 2 VPNs condition, specifically BGP Layer 2 VPN route distinguisher. BGP-signaled L2VPN routes need distinguishable VPN identifiers so unrelated overlapping customer service advertisements do not collide. In this scenario, however, the distinguishing issue is L2VPN service-label swapped and the confirming observation is: The destination PE maps the incoming service label to the intended customer attachment.

Question 986

During an inter-POP failover test, an HPE Juniper Networking engineer investigates this situation: An old customer MAC entry remains associated with a disconnected VPLS site, creating blackholes for a short period after remote access failure. Which targeted check most directly distinguishes the likely cause before a configuration change?

  1. Compare RT export values and local import membership for the L2VPN instance.
  2. Inspect MAC aging and any supported MAC flush signaling on failure of the attachment or pseudowire.
  3. Inspect local and remote site IDs and the BGP L2VPN route connection mapping.
  4. Inspect whether VPLS uses BGP autodiscovery/signaling or explicit LDP neighbor configuration.

Explanation

Correct Answer

B:

Inspect MAC aging and any supported MAC flush signaling on failure of the attachment or pseudowire. This check examines the decisive condition for VPLS MAC withdrawal timing before any unrelated changes are made. The underlying mechanism is: VPLS forwarding uses learned MAC entries; stale bindings may persist until aging or explicit flush removes them. The confirming observation is: The stale MAC entry disappears promptly and new traffic relearns the correct active attachment.

Incorrect Answers

A:

Compare RT export values and local import membership for the L2VPN instance. This is a plausible diagnostic check for a different Layer 2 VPNs condition, specifically BGP L2VPN route target mismatch. Route targets control membership and distribution of BGP-based L2VPN service advertisements. In this scenario, however, the distinguishing issue is VPLS MAC withdrawal timing and the confirming observation is: The stale MAC entry disappears promptly and new traffic relearns the correct active attachment.

C:

Inspect local and remote site IDs and the BGP L2VPN route connection mapping. This is a plausible diagnostic check for a different Layer 2 VPNs condition, specifically BGP L2VPN site ID collision. BGP L2VPN site identifiers help map distinct site attachments into the signaled service topology. In this scenario, however, the distinguishing issue is VPLS MAC withdrawal timing and the confirming observation is: The stale MAC entry disappears promptly and new traffic relearns the correct active attachment.

D:

Inspect whether VPLS uses BGP autodiscovery/signaling or explicit LDP neighbor configuration. This is a plausible diagnostic check for a different Layer 2 VPNs condition, specifically VPLS BGP versus LDP signaling. VPLS signaling design determines how remote sites are discovered and how service labels are exchanged. In this scenario, however, the distinguishing issue is VPLS MAC withdrawal timing and the confirming observation is: The stale MAC entry disappears promptly and new traffic relearns the correct active attachment.

Question 987

During a control-plane reliability review, an HPE Juniper Networking engineer investigates this situation: An old customer MAC entry remains associated with a disconnected VPLS site, creating blackholes for a short period after remote access failure. Which routing or service mechanism best explains the reported behavior?

  1. BGP-signaled L2VPN routes need distinguishable VPN identifiers so unrelated overlapping customer service advertisements do not collide.
  2. Route targets control membership and distribution of BGP-based L2VPN service advertisements.
  3. VPLS forwarding uses learned MAC entries; stale bindings may persist until aging or explicit flush removes them.
  4. BGP L2VPN site identifiers help map distinct site attachments into the signaled service topology.

Explanation

Correct Answer

C:

VPLS forwarding uses learned MAC entries; stale bindings may persist until aging or explicit flush removes them. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: The stale MAC entry disappears promptly and new traffic relearns the correct active attachment. The targeted correction is: Enable supported MAC flush or reduce stale-state causes according to platform behavior.

Incorrect Answers

A:

BGP-signaled L2VPN routes need distinguishable VPN identifiers so unrelated overlapping customer service advertisements do not collide. This is a plausible protocol explanation for a different Layer 2 VPNs condition, specifically BGP Layer 2 VPN route distinguisher. BGP-signaled L2VPN routes need distinguishable VPN identifiers so unrelated overlapping customer service advertisements do not collide. In this scenario, however, the distinguishing issue is VPLS MAC withdrawal timing and the confirming observation is: The stale MAC entry disappears promptly and new traffic relearns the correct active attachment.

B:

Route targets control membership and distribution of BGP-based L2VPN service advertisements. This is a plausible protocol explanation for a different Layer 2 VPNs condition, specifically BGP L2VPN route target mismatch. Route targets control membership and distribution of BGP-based L2VPN service advertisements. In this scenario, however, the distinguishing issue is VPLS MAC withdrawal timing and the confirming observation is: The stale MAC entry disappears promptly and new traffic relearns the correct active attachment.

D:

BGP L2VPN site identifiers help map distinct site attachments into the signaled service topology. This is a plausible protocol explanation for a different Layer 2 VPNs condition, specifically BGP L2VPN site ID collision. BGP L2VPN site identifiers help map distinct site attachments into the signaled service topology. In this scenario, however, the distinguishing issue is VPLS MAC withdrawal timing and the confirming observation is: The stale MAC entry disappears promptly and new traffic relearns the correct active attachment.

Question 988

During a service-provider escalation, an HPE Juniper Networking engineer investigates this situation: An old customer MAC entry remains associated with a disconnected VPLS site, creating blackholes for a short period after remote access failure. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?

  1. Distinct RDs preserve separate advertisements and only correct tenant membership is imported.
  2. The receiver imports intended L2VPN NLRI while unrelated tenants' services remain filtered.
  3. Each site advertises its planned unique identity and the remote connection mapping is unambiguous.
  4. The stale MAC entry disappears promptly and new traffic relearns the correct active attachment.

Explanation

Correct Answer

D:

The stale MAC entry disappears promptly and new traffic relearns the correct active attachment. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: VPLS forwarding uses learned MAC entries; stale bindings may persist until aging or explicit flush removes them.

Incorrect Answers

A:

Distinct RDs preserve separate advertisements and only correct tenant membership is imported. This is a plausible observed evidence for a different Layer 2 VPNs condition, specifically BGP Layer 2 VPN route distinguisher. BGP-signaled L2VPN routes need distinguishable VPN identifiers so unrelated overlapping customer service advertisements do not collide. In this scenario, however, the distinguishing issue is VPLS MAC withdrawal timing and the confirming observation is: The stale MAC entry disappears promptly and new traffic relearns the correct active attachment.

B:

The receiver imports intended L2VPN NLRI while unrelated tenants' services remain filtered. This is a plausible observed evidence for a different Layer 2 VPNs condition, specifically BGP L2VPN route target mismatch. Route targets control membership and distribution of BGP-based L2VPN service advertisements. In this scenario, however, the distinguishing issue is VPLS MAC withdrawal timing and the confirming observation is: The stale MAC entry disappears promptly and new traffic relearns the correct active attachment.

C:

Each site advertises its planned unique identity and the remote connection mapping is unambiguous. This is a plausible observed evidence for a different Layer 2 VPNs condition, specifically BGP L2VPN site ID collision. BGP L2VPN site identifiers help map distinct site attachments into the signaled service topology. In this scenario, however, the distinguishing issue is VPLS MAC withdrawal timing and the confirming observation is: The stale MAC entry disappears promptly and new traffic relearns the correct active attachment.

Question 989

During a new PE-router service turn-up, an HPE Juniper Networking engineer investigates this situation: An old customer MAC entry remains associated with a disconnected VPLS site, creating blackholes for a short period after remote access failure. Which response or focused corrective action best addresses this situation without changing unrelated components?

  1. Enable supported MAC flush or reduce stale-state causes according to platform behavior.
  2. Configure the intended matching ESI with compatible redundancy parameters.
  3. Assign unique appropriate service RDs and verify per-tenant RT imports.
  4. Align exact RT policies for the participating customer sites.

Explanation

Correct Answer

A:

Enable supported MAC flush or reduce stale-state causes according to platform behavior. The change addresses the root behavior described here: VPLS forwarding uses learned MAC entries; stale bindings may persist until aging or explicit flush removes them. Verify success with: The stale MAC entry disappears promptly and new traffic relearns the correct active attachment.

Incorrect Answers

B:

Configure the intended matching ESI with compatible redundancy parameters. This is a plausible configuration or operational fix for a different Layer 2 VPNs condition, specifically EVPN Ethernet segment identifier mismatch. EVPN multihoming relies on consistent Ethernet segment identification among PEs attached to the same segment. In this scenario, however, the distinguishing issue is VPLS MAC withdrawal timing and the confirming observation is: The stale MAC entry disappears promptly and new traffic relearns the correct active attachment.

C:

Assign unique appropriate service RDs and verify per-tenant RT imports. This is a plausible configuration or operational fix for a different Layer 2 VPNs condition, specifically BGP Layer 2 VPN route distinguisher. BGP-signaled L2VPN routes need distinguishable VPN identifiers so unrelated overlapping customer service advertisements do not collide. In this scenario, however, the distinguishing issue is VPLS MAC withdrawal timing and the confirming observation is: The stale MAC entry disappears promptly and new traffic relearns the correct active attachment.

D:

Align exact RT policies for the participating customer sites. This is a plausible configuration or operational fix for a different Layer 2 VPNs condition, specifically BGP L2VPN route target mismatch. Route targets control membership and distribution of BGP-based L2VPN service advertisements. In this scenario, however, the distinguishing issue is VPLS MAC withdrawal timing and the confirming observation is: The stale MAC entry disappears promptly and new traffic relearns the correct active attachment.

Question 990

During a customer VPN change window, an HPE Juniper Networking engineer investigates this situation: An old customer MAC entry remains associated with a disconnected VPLS site, creating blackholes for a short period after remote access failure. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Validate both all-active reachability and withdrawal during a controlled multihoming failover.
  2. Test failover with previously learned MACs rather than only unknown destination frames.
  3. Validate ESI consistency before enabling dual-homed production traffic.
  4. Audit VPN identifiers before consolidating L2VPN routes on shared reflectors.

Explanation

Correct Answer

B:

Test failover with previously learned MACs rather than only unknown destination frames. The control limits repetition of the described root condition: VPLS forwarding uses learned MAC entries; stale bindings may persist until aging or explicit flush removes them. During audits, confirm: The stale MAC entry disappears promptly and new traffic relearns the correct active attachment.

Incorrect Answers

A:

Validate both all-active reachability and withdrawal during a controlled multihoming failover. This is a plausible preventive practice for a different Layer 2 VPNs condition, specifically EVPN Ethernet AD signaling. Ethernet AD routes help distribute EVPN segment reachability and can support multihoming convergence mechanisms. In this scenario, however, the distinguishing issue is VPLS MAC withdrawal timing and the confirming observation is: The stale MAC entry disappears promptly and new traffic relearns the correct active attachment.

C:

Validate ESI consistency before enabling dual-homed production traffic. This is a plausible preventive practice for a different Layer 2 VPNs condition, specifically EVPN Ethernet segment identifier mismatch. EVPN multihoming relies on consistent Ethernet segment identification among PEs attached to the same segment. In this scenario, however, the distinguishing issue is VPLS MAC withdrawal timing and the confirming observation is: The stale MAC entry disappears promptly and new traffic relearns the correct active attachment.

D:

Audit VPN identifiers before consolidating L2VPN routes on shared reflectors. This is a plausible preventive practice for a different Layer 2 VPNs condition, specifically BGP Layer 2 VPN route distinguisher. BGP-signaled L2VPN routes need distinguishable VPN identifiers so unrelated overlapping customer service advertisements do not collide. In this scenario, however, the distinguishing issue is VPLS MAC withdrawal timing and the confirming observation is: The stale MAC entry disappears promptly and new traffic relearns the correct active attachment.


Service Provider Routing and Switching, Professional (JNCIP-SP) (JN0-664) Practice Tests

Purchase Individually

JN0-664 Premium File

Premium File
JN0-664 Premium File
96 Q&A
$76.99$69.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.