Pass Your Juniper JN0-664 Exam Easy!

Juniper JN0-664 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

JN0-664 Premium VCE File

Juniper JN0-664 Premium File

96 Questions & Answers

Last Update: Oct 12, 2026

$69.99

JN0-664 Bundle gives you unlimited access to "JN0-664" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
JN0-664 Premium VCE File
Juniper JN0-664 Premium File

96 Questions & Answers

Last Update: Oct 12, 2026

$69.99

Juniper JN0-664 Exam Bundle gives you unlimited access to "JN0-664" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

Juniper JN0-664 Practice Test 84

Question 830

During a customer VPN change window, an HPE Juniper Networking engineer investigates this situation: Two VPN sites have both a private backdoor OSPF connection and an MPLS VPN service, but OSPF intra-area routing over the backdoor wins over the desired provider path. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Maintain a site reachability matrix and retest after VRF changes.
  2. Model backdoor failure and path restoration before modifying customer OSPF area design.
  3. Check RD uniqueness separately from route target policy when onboarding overlapping tenants.
  4. Verify IPv4 and IPv6 VPN route sets separately during dual-stack expansion.

Explanation

Correct Answer

B:

Model backdoor failure and path restoration before modifying customer OSPF area design. The control limits repetition of the described root condition: An OSPF sham link can make the provider path appear as an intra-area option to address a backdoor path-type preference issue. During audits, confirm: The PE-provided path competes in the expected OSPF intra-area calculation with correct forwarding.

Incorrect Answers

A:

Maintain a site reachability matrix and retest after VRF changes. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically Full-mesh VPN routing. A full-mesh L3VPN needs an appropriate route distribution relationship among all participating VRFs. In this scenario, however, the distinguishing issue is Sham link OSPF backdoor preference and the confirming observation is: The PE-provided path competes in the expected OSPF intra-area calculation with correct forwarding.

C:

Check RD uniqueness separately from route target policy when onboarding overlapping tenants. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically Route distinguisher for overlapping customer routes. A route distinguisher makes overlapping customer IPv4 prefixes distinguishable in VPN-IPv4 NLRI, but does not by itself decide route import. In this scenario, however, the distinguishing issue is Sham link OSPF backdoor preference and the confirming observation is: The PE-provided path competes in the expected OSPF intra-area calculation with correct forwarding.

D:

Verify IPv4 and IPv6 VPN route sets separately during dual-stack expansion. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically IPv6 VPN reachability. IPv6 L3VPN route exchange needs the appropriate MP-BGP address family and IPv6 route handling independent of IPv4 VPN success. In this scenario, however, the distinguishing issue is Sham link OSPF backdoor preference and the confirming observation is: The PE-provided path competes in the expected OSPF intra-area calculation with correct forwarding.

Question 831

During an overnight NOC investigation, an HPE Juniper Networking engineer investigates this situation: The remote PE receives a VPN packet and resolves the correct service label but cannot send to the CE because the VRF route points to a stale neighbor address. Which targeted check most directly distinguishes the likely cause before a configuration change?

  1. Inspect advertised VPN service labels and receiving PE label-to-VRF forwarding mapping.
  2. Inspect MPLS label stacks at penultimate and egress hops and the negotiated pop behavior.
  3. Inspect the destination VRF route and CE-facing ARP/neighbor resolution after label termination.
  4. Inspect the remote PE BGP next-hop and MPLS/LDP or RSVP forwarding to that endpoint.

Explanation

Correct Answer

C:

Inspect the destination VRF route and CE-facing ARP/neighbor resolution after label termination. This check examines the decisive condition for VPN service egress CE next hop before any unrelated changes are made. The underlying mechanism is: Successful MPLS service-label disposition does not guarantee the final customer next hop is reachable. The confirming observation is: The egress VRF FIB and CE neighbor entry point to a reachable customer attachment.

Incorrect Answers

A:

Inspect advertised VPN service labels and receiving PE label-to-VRF forwarding mapping. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically VPN service label binding. L3VPN packet delivery commonly uses an outer transport label plus an inner service label to select the destination VRF or route. In this scenario, however, the distinguishing issue is VPN service egress CE next hop and the confirming observation is: The egress VRF FIB and CE neighbor entry point to a reachable customer attachment.

B:

Inspect MPLS label stacks at penultimate and egress hops and the negotiated pop behavior. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically LSP penultimate-hop pop effect. Penultimate-hop popping can remove an outer transport label before the egress PE while retaining the service label for VPN context. In this scenario, however, the distinguishing issue is VPN service egress CE next hop and the confirming observation is: The egress VRF FIB and CE neighbor entry point to a reachable customer attachment.

D:

Inspect the remote PE BGP next-hop and MPLS/LDP or RSVP forwarding to that endpoint. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically MPLS transport label missing. A usable L3VPN data path requires provider transport reachability in addition to customer service route advertisements. In this scenario, however, the distinguishing issue is VPN service egress CE next hop and the confirming observation is: The egress VRF FIB and CE neighbor entry point to a reachable customer attachment.

Question 832

During a customer service restoration, an HPE Juniper Networking engineer investigates this situation: The remote PE receives a VPN packet and resolves the correct service label but cannot send to the CE because the VRF route points to a stale neighbor address. Which routing or service mechanism best explains the reported behavior?

  1. L3VPN packet delivery commonly uses an outer transport label plus an inner service label to select the destination VRF or route.
  2. Penultimate-hop popping can remove an outer transport label before the egress PE while retaining the service label for VPN context.
  3. A usable L3VPN data path requires provider transport reachability in addition to customer service route advertisements.
  4. Successful MPLS service-label disposition does not guarantee the final customer next hop is reachable.

Explanation

Correct Answer

D:

Successful MPLS service-label disposition does not guarantee the final customer next hop is reachable. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: The egress VRF FIB and CE neighbor entry point to a reachable customer attachment. The targeted correction is: Correct CE adjacency or the VRF next hop without changing healthy core VPN distribution.

Incorrect Answers

A:

L3VPN packet delivery commonly uses an outer transport label plus an inner service label to select the destination VRF or route. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically VPN service label binding. L3VPN packet delivery commonly uses an outer transport label plus an inner service label to select the destination VRF or route. In this scenario, however, the distinguishing issue is VPN service egress CE next hop and the confirming observation is: The egress VRF FIB and CE neighbor entry point to a reachable customer attachment.

B:

Penultimate-hop popping can remove an outer transport label before the egress PE while retaining the service label for VPN context. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically LSP penultimate-hop pop effect. Penultimate-hop popping can remove an outer transport label before the egress PE while retaining the service label for VPN context. In this scenario, however, the distinguishing issue is VPN service egress CE next hop and the confirming observation is: The egress VRF FIB and CE neighbor entry point to a reachable customer attachment.

C:

A usable L3VPN data path requires provider transport reachability in addition to customer service route advertisements. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically MPLS transport label missing. A usable L3VPN data path requires provider transport reachability in addition to customer service route advertisements. In this scenario, however, the distinguishing issue is VPN service egress CE next hop and the confirming observation is: The egress VRF FIB and CE neighbor entry point to a reachable customer attachment.

Question 833

During an edge-to-core validation, an HPE Juniper Networking engineer investigates this situation: The remote PE receives a VPN packet and resolves the correct service label but cannot send to the CE because the VRF route points to a stale neighbor address. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?

  1. The egress VRF FIB and CE neighbor entry point to a reachable customer attachment.
  2. The destination PE resolves the inner service label to the correct customer forwarding context.
  3. The receiving PE resolves the remaining service label into the intended VRF forwarding path.
  4. The customer prefix appears only in the intended VRF table and not as an accidental global route.

Explanation

Correct Answer

A:

The egress VRF FIB and CE neighbor entry point to a reachable customer attachment. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: Successful MPLS service-label disposition does not guarantee the final customer next hop is reachable.

Incorrect Answers

B:

The destination PE resolves the inner service label to the correct customer forwarding context. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically VPN service label binding. L3VPN packet delivery commonly uses an outer transport label plus an inner service label to select the destination VRF or route. In this scenario, however, the distinguishing issue is VPN service egress CE next hop and the confirming observation is: The egress VRF FIB and CE neighbor entry point to a reachable customer attachment.

C:

The receiving PE resolves the remaining service label into the intended VRF forwarding path. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically LSP penultimate-hop pop effect. Penultimate-hop popping can remove an outer transport label before the egress PE while retaining the service label for VPN context. In this scenario, however, the distinguishing issue is VPN service egress CE next hop and the confirming observation is: The egress VRF FIB and CE neighbor entry point to a reachable customer attachment.

D:

The customer prefix appears only in the intended VRF table and not as an accidental global route. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically Customer CE interface mapped wrong VRF. L3VPN separation starts at the correct PE customer interface association with the VRF. In this scenario, however, the distinguishing issue is VPN service egress CE next hop and the confirming observation is: The egress VRF FIB and CE neighbor entry point to a reachable customer attachment.

Question 834

During a high-availability validation, an HPE Juniper Networking engineer investigates this situation: The remote PE receives a VPN packet and resolves the correct service label but cannot send to the CE because the VRF route points to a stale neighbor address. Which response or focused corrective action best addresses this situation without changing unrelated components?

  1. Correct service-label advertisement and VRF forwarding programming after verifying the transport path.
  2. Correct CE adjacency or the VRF next hop without changing healthy core VPN distribution.
  3. Accept valid penultimate-hop pop behavior and fix only missing required service-label handling.
  4. Attach the CE logical interface to the correct instance type and VRF.

Explanation

Correct Answer

B:

Correct CE adjacency or the VRF next hop without changing healthy core VPN distribution. The change addresses the root behavior described here: Successful MPLS service-label disposition does not guarantee the final customer next hop is reachable. Verify success with: The egress VRF FIB and CE neighbor entry point to a reachable customer attachment.

Incorrect Answers

A:

Correct service-label advertisement and VRF forwarding programming after verifying the transport path. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically VPN service label binding. L3VPN packet delivery commonly uses an outer transport label plus an inner service label to select the destination VRF or route. In this scenario, however, the distinguishing issue is VPN service egress CE next hop and the confirming observation is: The egress VRF FIB and CE neighbor entry point to a reachable customer attachment.

C:

Accept valid penultimate-hop pop behavior and fix only missing required service-label handling. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically LSP penultimate-hop pop effect. Penultimate-hop popping can remove an outer transport label before the egress PE while retaining the service label for VPN context. In this scenario, however, the distinguishing issue is VPN service egress CE next hop and the confirming observation is: The egress VRF FIB and CE neighbor entry point to a reachable customer attachment.

D:

Attach the CE logical interface to the correct instance type and VRF. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically Customer CE interface mapped wrong VRF. L3VPN separation starts at the correct PE customer interface association with the VRF. In this scenario, however, the distinguishing issue is VPN service egress CE next hop and the confirming observation is: The egress VRF FIB and CE neighbor entry point to a reachable customer attachment.

Question 835

During a Junos routing maintenance review, an HPE Juniper Networking engineer investigates this situation: The remote PE receives a VPN packet and resolves the correct service label but cannot send to the CE because the VRF route points to a stale neighbor address. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Check both transport and service label roles in VPN tracer and label-table reviews.
  2. Document expected label-stack depth at each monitored hop.
  3. Verify post-label customer delivery using CE-facing counters and neighbor tests.
  4. Include interface-to-tenant mapping validation in turn-up checklists.

Explanation

Correct Answer

C:

Verify post-label customer delivery using CE-facing counters and neighbor tests. The control limits repetition of the described root condition: Successful MPLS service-label disposition does not guarantee the final customer next hop is reachable. During audits, confirm: The egress VRF FIB and CE neighbor entry point to a reachable customer attachment.

Incorrect Answers

A:

Check both transport and service label roles in VPN tracer and label-table reviews. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically VPN service label binding. L3VPN packet delivery commonly uses an outer transport label plus an inner service label to select the destination VRF or route. In this scenario, however, the distinguishing issue is VPN service egress CE next hop and the confirming observation is: The egress VRF FIB and CE neighbor entry point to a reachable customer attachment.

B:

Document expected label-stack depth at each monitored hop. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically LSP penultimate-hop pop effect. Penultimate-hop popping can remove an outer transport label before the egress PE while retaining the service label for VPN context. In this scenario, however, the distinguishing issue is VPN service egress CE next hop and the confirming observation is: The egress VRF FIB and CE neighbor entry point to a reachable customer attachment.

D:

Include interface-to-tenant mapping validation in turn-up checklists. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically Customer CE interface mapped wrong VRF. L3VPN separation starts at the correct PE customer interface association with the VRF. In this scenario, however, the distinguishing issue is VPN service egress CE next hop and the confirming observation is: The egress VRF FIB and CE neighbor entry point to a reachable customer attachment.

Question 836

During a managed service audit, an HPE Juniper Networking engineer investigates this situation: A provider advertises one tenant's large aggregate to all regional PEs, but the aggregate contains prefixes not actually assigned to that customer. Which targeted check most directly distinguishes the likely cause before a configuration change?

  1. Compare RT namespaces and explicit import/export policies across both providers.
  2. Inspect the logical CE-facing interface's routing-instance membership and route table location.
  3. Trace the customer's default VRF route and next-hop path to the intended shared firewall service.
  4. Inspect the VRF export aggregate and contributing prefixes against tenant address ownership.

Explanation

Correct Answer

D:

Inspect the VRF export aggregate and contributing prefixes against tenant address ownership. This check examines the decisive condition for VRF export summary overscoped before any unrelated changes are made. The underlying mechanism is: VPN export summaries must respect each tenant's address scope; a broad aggregate can attract unrelated traffic even if RTs are correct. The confirming observation is: The aggregate advertises only assigned and reachable tenant prefixes and does not black-hole neighboring addresses.

Incorrect Answers

A:

Compare RT namespaces and explicit import/export policies across both providers. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically Inter-AS route target collision. Route targets have policy meaning across AS boundaries; overlapping assignment can connect unintended VPN memberships. In this scenario, however, the distinguishing issue is VRF export summary overscoped and the confirming observation is: The aggregate advertises only assigned and reachable tenant prefixes and does not black-hole neighboring addresses.

B:

Inspect the logical CE-facing interface's routing-instance membership and route table location. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically Customer CE interface mapped wrong VRF. L3VPN separation starts at the correct PE customer interface association with the VRF. In this scenario, however, the distinguishing issue is VRF export summary overscoped and the confirming observation is: The aggregate advertises only assigned and reachable tenant prefixes and does not black-hole neighboring addresses.

C:

Trace the customer's default VRF route and next-hop path to the intended shared firewall service. This is a plausible diagnostic check for a different Layer 3 VPNs condition, specifically L3VPN Internet breakout design. Internet access for L3VPN customers depends on explicit routing, route leaking or central breakout topology. In this scenario, however, the distinguishing issue is VRF export summary overscoped and the confirming observation is: The aggregate advertises only assigned and reachable tenant prefixes and does not black-hole neighboring addresses.

Question 837

During a network architecture troubleshooting workshop, an HPE Juniper Networking engineer investigates this situation: A provider advertises one tenant's large aggregate to all regional PEs, but the aggregate contains prefixes not actually assigned to that customer. Which routing or service mechanism best explains the reported behavior?

  1. VPN export summaries must respect each tenant's address scope; a broad aggregate can attract unrelated traffic even if RTs are correct.
  2. Route targets have policy meaning across AS boundaries; overlapping assignment can connect unintended VPN memberships.
  3. L3VPN separation starts at the correct PE customer interface association with the VRF.
  4. Internet access for L3VPN customers depends on explicit routing, route leaking or central breakout topology.

Explanation

Correct Answer

A:

VPN export summaries must respect each tenant's address scope; a broad aggregate can attract unrelated traffic even if RTs are correct. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: The aggregate advertises only assigned and reachable tenant prefixes and does not black-hole neighboring addresses. The targeted correction is: Constrain VPN route aggregation to the verified customer allocation.

Incorrect Answers

B:

Route targets have policy meaning across AS boundaries; overlapping assignment can connect unintended VPN memberships. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically Inter-AS route target collision. Route targets have policy meaning across AS boundaries; overlapping assignment can connect unintended VPN memberships. In this scenario, however, the distinguishing issue is VRF export summary overscoped and the confirming observation is: The aggregate advertises only assigned and reachable tenant prefixes and does not black-hole neighboring addresses.

C:

L3VPN separation starts at the correct PE customer interface association with the VRF. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically Customer CE interface mapped wrong VRF. L3VPN separation starts at the correct PE customer interface association with the VRF. In this scenario, however, the distinguishing issue is VRF export summary overscoped and the confirming observation is: The aggregate advertises only assigned and reachable tenant prefixes and does not black-hole neighboring addresses.

D:

Internet access for L3VPN customers depends on explicit routing, route leaking or central breakout topology. This is a plausible protocol explanation for a different Layer 3 VPNs condition, specifically L3VPN Internet breakout design. Internet access for L3VPN customers depends on explicit routing, route leaking or central breakout topology. In this scenario, however, the distinguishing issue is VRF export summary overscoped and the confirming observation is: The aggregate advertises only assigned and reachable tenant prefixes and does not black-hole neighboring addresses.

Question 838

During an inter-POP failover test, an HPE Juniper Networking engineer investigates this situation: A provider advertises one tenant's large aggregate to all regional PEs, but the aggregate contains prefixes not actually assigned to that customer. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?

  1. The customer prefix appears only in the intended VRF table and not as an accidental global route.
  2. The aggregate advertises only assigned and reachable tenant prefixes and does not black-hole neighboring addresses.
  3. Outbound customer traffic traverses the approved firewall and follows a valid return route.
  4. Every authorized site has the intended remote site routes without unwanted tenant routes.

Explanation

Correct Answer

B:

The aggregate advertises only assigned and reachable tenant prefixes and does not black-hole neighboring addresses. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: VPN export summaries must respect each tenant's address scope; a broad aggregate can attract unrelated traffic even if RTs are correct.

Incorrect Answers

A:

The customer prefix appears only in the intended VRF table and not as an accidental global route. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically Customer CE interface mapped wrong VRF. L3VPN separation starts at the correct PE customer interface association with the VRF. In this scenario, however, the distinguishing issue is VRF export summary overscoped and the confirming observation is: The aggregate advertises only assigned and reachable tenant prefixes and does not black-hole neighboring addresses.

C:

Outbound customer traffic traverses the approved firewall and follows a valid return route. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically L3VPN Internet breakout design. Internet access for L3VPN customers depends on explicit routing, route leaking or central breakout topology. In this scenario, however, the distinguishing issue is VRF export summary overscoped and the confirming observation is: The aggregate advertises only assigned and reachable tenant prefixes and does not black-hole neighboring addresses.

D:

Every authorized site has the intended remote site routes without unwanted tenant routes. This is a plausible observed evidence for a different Layer 3 VPNs condition, specifically Full-mesh VPN routing. A full-mesh L3VPN needs an appropriate route distribution relationship among all participating VRFs. In this scenario, however, the distinguishing issue is VRF export summary overscoped and the confirming observation is: The aggregate advertises only assigned and reachable tenant prefixes and does not black-hole neighboring addresses.

Question 839

During a control-plane reliability review, an HPE Juniper Networking engineer investigates this situation: A provider advertises one tenant's large aggregate to all regional PEs, but the aggregate contains prefixes not actually assigned to that customer. Which response or focused corrective action best addresses this situation without changing unrelated components?

  1. Coordinate unique RT conventions or explicit RT translation across the boundary.
  2. Attach the CE logical interface to the correct instance type and VRF.
  3. Constrain VPN route aggregation to the verified customer allocation.
  4. Implement the contracted centralized breakout with a controlled default and return-path architecture.

Explanation

Correct Answer

C:

Constrain VPN route aggregation to the verified customer allocation. The change addresses the root behavior described here: VPN export summaries must respect each tenant's address scope; a broad aggregate can attract unrelated traffic even if RTs are correct. Verify success with: The aggregate advertises only assigned and reachable tenant prefixes and does not black-hole neighboring addresses.

Incorrect Answers

A:

Coordinate unique RT conventions or explicit RT translation across the boundary. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically Inter-AS route target collision. Route targets have policy meaning across AS boundaries; overlapping assignment can connect unintended VPN memberships. In this scenario, however, the distinguishing issue is VRF export summary overscoped and the confirming observation is: The aggregate advertises only assigned and reachable tenant prefixes and does not black-hole neighboring addresses.

B:

Attach the CE logical interface to the correct instance type and VRF. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically Customer CE interface mapped wrong VRF. L3VPN separation starts at the correct PE customer interface association with the VRF. In this scenario, however, the distinguishing issue is VRF export summary overscoped and the confirming observation is: The aggregate advertises only assigned and reachable tenant prefixes and does not black-hole neighboring addresses.

D:

Implement the contracted centralized breakout with a controlled default and return-path architecture. This is a plausible configuration or operational fix for a different Layer 3 VPNs condition, specifically L3VPN Internet breakout design. Internet access for L3VPN customers depends on explicit routing, route leaking or central breakout topology. In this scenario, however, the distinguishing issue is VRF export summary overscoped and the confirming observation is: The aggregate advertises only assigned and reachable tenant prefixes and does not black-hole neighboring addresses.

Question 840

During a service-provider escalation, an HPE Juniper Networking engineer investigates this situation: A provider advertises one tenant's large aggregate to all regional PEs, but the aggregate contains prefixes not actually assigned to that customer. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Review route-target interest and scale during multi-tenant growth.
  2. Include interface-to-tenant mapping validation in turn-up checklists.
  3. Validate security inspection and symmetric routing for each tenant.
  4. Check aggregate coverage and negative reachability at the tenant boundary.

Explanation

Correct Answer

D:

Check aggregate coverage and negative reachability at the tenant boundary. The control limits repetition of the described root condition: VPN export summaries must respect each tenant's address scope; a broad aggregate can attract unrelated traffic even if RTs are correct. During audits, confirm: The aggregate advertises only assigned and reachable tenant prefixes and does not black-hole neighboring addresses.

Incorrect Answers

A:

Review route-target interest and scale during multi-tenant growth. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically Route-target constraint scale. Route-target-based distribution can limit which VPN routes are propagated toward routers that have corresponding VPN interests. In this scenario, however, the distinguishing issue is VRF export summary overscoped and the confirming observation is: The aggregate advertises only assigned and reachable tenant prefixes and does not black-hole neighboring addresses.

B:

Include interface-to-tenant mapping validation in turn-up checklists. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically Customer CE interface mapped wrong VRF. L3VPN separation starts at the correct PE customer interface association with the VRF. In this scenario, however, the distinguishing issue is VRF export summary overscoped and the confirming observation is: The aggregate advertises only assigned and reachable tenant prefixes and does not black-hole neighboring addresses.

C:

Validate security inspection and symmetric routing for each tenant. This is a plausible preventive practice for a different Layer 3 VPNs condition, specifically L3VPN Internet breakout design. Internet access for L3VPN customers depends on explicit routing, route leaking or central breakout topology. In this scenario, however, the distinguishing issue is VRF export summary overscoped and the confirming observation is: The aggregate advertises only assigned and reachable tenant prefixes and does not black-hole neighboring addresses.


Service Provider Routing and Switching, Professional (JNCIP-SP) (JN0-664) Practice Tests

Purchase Individually

JN0-664 Premium File

Premium File
JN0-664 Premium File
96 Q&A
$76.99$69.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.