Pass Your Juniper JN0-664 Exam Easy!

Juniper JN0-664 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

JN0-664 Premium VCE File

Juniper JN0-664 Premium File

96 Questions & Answers

Last Update: Oct 12, 2026

$69.99

JN0-664 Bundle gives you unlimited access to "JN0-664" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
JN0-664 Premium VCE File
Juniper JN0-664 Premium File

96 Questions & Answers

Last Update: Oct 12, 2026

$69.99

Juniper JN0-664 Exam Bundle gives you unlimited access to "JN0-664" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

Juniper JN0-664 Practice Test 49

Question 480

During a high-availability validation, an HPE Juniper Networking engineer investigates this situation: Two packets map into the same forwarding class but one should be discarded sooner during congestion because it carries a higher packet loss priority. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Validate control adjacency stability under full data-plane link utilization.
  2. Confirm on-wire markings rather than only local forwarding-class counters.
  3. Include classification-to-queue trace checks in CoS regression tests.
  4. Check loss-priority boundaries across trust domains and encapsulation changes.

Explanation

Correct Answer

D:

Check loss-priority boundaries across trust domains and encapsulation changes. The control limits repetition of the described root condition: Forwarding class chooses a queue while packet loss priority influences the packet's discard preference under congestion. During audits, confirm: High-PLP packets experience the expected early-drop tendency while low-PLP packets are better protected.

Incorrect Answers

A:

Validate control adjacency stability under full data-plane link utilization. This is a plausible preventive practice for a different Class of Service (CoS) condition, specifically Network control queue. Routing control traffic often needs distinct forwarding treatment to remain stable during forwarding congestion. In this scenario, however, the distinguishing issue is Loss priority distinction and the confirming observation is: High-PLP packets experience the expected early-drop tendency while low-PLP packets are better protected.

B:

Confirm on-wire markings rather than only local forwarding-class counters. This is a plausible preventive practice for a different Class of Service (CoS) condition, specifically DSCP rewrite at egress. A rewrite rule maps internal forwarding treatment back to a packet header field for the downstream domain. In this scenario, however, the distinguishing issue is Loss priority distinction and the confirming observation is: High-PLP packets experience the expected early-drop tendency while low-PLP packets are better protected.

C:

Include classification-to-queue trace checks in CoS regression tests. This is a plausible preventive practice for a different Class of Service (CoS) condition, specifically Forwarding class queue mapping. The forwarding class connects classification results to an output queue; correct DSCP alone does not guarantee that queue mapping. In this scenario, however, the distinguishing issue is Loss priority distinction and the confirming observation is: High-PLP packets experience the expected early-drop tendency while low-PLP packets are better protected.

Question 481

During a metro aggregation incident, an HPE Juniper Networking engineer investigates this situation: Traffic receives the correct internal forwarding class but downstream routers classify it as best effort because the outgoing packet still has its old DSCP value. Which targeted check most directly distinguishes the likely cause before a configuration change?

  1. Compare internal classification with the applied rewrite rules and on-wire DSCP markings.
  2. Inspect classifier results, forwarding-class-to-queue bindings and effective egress interface configuration.
  3. Inspect PLP classification and egress queue drop behavior for both packet types.
  4. Correlate queue occupancy, peak burst size and scheduler buffer allocation.

Explanation

Correct Answer

A:

Compare internal classification with the applied rewrite rules and on-wire DSCP markings. This check examines the decisive condition for DSCP rewrite at egress before any unrelated changes are made. The underlying mechanism is: A rewrite rule maps internal forwarding treatment back to a packet header field for the downstream domain. The confirming observation is: Packet capture on the egress wire contains the intended DSCP marking for correctly classified traffic.

Incorrect Answers

B:

Inspect classifier results, forwarding-class-to-queue bindings and effective egress interface configuration. This is a plausible diagnostic check for a different Class of Service (CoS) condition, specifically Forwarding class queue mapping. The forwarding class connects classification results to an output queue; correct DSCP alone does not guarantee that queue mapping. In this scenario, however, the distinguishing issue is DSCP rewrite at egress and the confirming observation is: Packet capture on the egress wire contains the intended DSCP marking for correctly classified traffic.

C:

Inspect PLP classification and egress queue drop behavior for both packet types. This is a plausible diagnostic check for a different Class of Service (CoS) condition, specifically Loss priority distinction. Forwarding class chooses a queue while packet loss priority influences the packet's discard preference under congestion. In this scenario, however, the distinguishing issue is DSCP rewrite at egress and the confirming observation is: Packet capture on the egress wire contains the intended DSCP marking for correctly classified traffic.

D:

Correlate queue occupancy, peak burst size and scheduler buffer allocation. This is a plausible diagnostic check for a different Class of Service (CoS) condition, specifically Scheduler queue buffer exhaustion. Scheduler settings govern buffer as well as bandwidth and priority, so transmit rate alone does not absorb short bursts. In this scenario, however, the distinguishing issue is DSCP rewrite at egress and the confirming observation is: Packet capture on the egress wire contains the intended DSCP marking for correctly classified traffic.

Question 482

During a managed service audit, an HPE Juniper Networking engineer investigates this situation: Traffic receives the correct internal forwarding class but downstream routers classify it as best effort because the outgoing packet still has its old DSCP value. Which routing or service mechanism best explains the reported behavior?

  1. The forwarding class connects classification results to an output queue; correct DSCP alone does not guarantee that queue mapping.
  2. A rewrite rule maps internal forwarding treatment back to a packet header field for the downstream domain.
  3. Forwarding class chooses a queue while packet loss priority influences the packet's discard preference under congestion.
  4. Scheduler settings govern buffer as well as bandwidth and priority, so transmit rate alone does not absorb short bursts.

Explanation

Correct Answer

B:

A rewrite rule maps internal forwarding treatment back to a packet header field for the downstream domain. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: Packet capture on the egress wire contains the intended DSCP marking for correctly classified traffic. The targeted correction is: Attach a suitable rewrite rule to the egress interface while respecting the agreed marking contract.

Incorrect Answers

A:

The forwarding class connects classification results to an output queue; correct DSCP alone does not guarantee that queue mapping. This is a plausible protocol explanation for a different Class of Service (CoS) condition, specifically Forwarding class queue mapping. The forwarding class connects classification results to an output queue; correct DSCP alone does not guarantee that queue mapping. In this scenario, however, the distinguishing issue is DSCP rewrite at egress and the confirming observation is: Packet capture on the egress wire contains the intended DSCP marking for correctly classified traffic.

C:

Forwarding class chooses a queue while packet loss priority influences the packet's discard preference under congestion. This is a plausible protocol explanation for a different Class of Service (CoS) condition, specifically Loss priority distinction. Forwarding class chooses a queue while packet loss priority influences the packet's discard preference under congestion. In this scenario, however, the distinguishing issue is DSCP rewrite at egress and the confirming observation is: Packet capture on the egress wire contains the intended DSCP marking for correctly classified traffic.

D:

Scheduler settings govern buffer as well as bandwidth and priority, so transmit rate alone does not absorb short bursts. This is a plausible protocol explanation for a different Class of Service (CoS) condition, specifically Scheduler queue buffer exhaustion. Scheduler settings govern buffer as well as bandwidth and priority, so transmit rate alone does not absorb short bursts. In this scenario, however, the distinguishing issue is DSCP rewrite at egress and the confirming observation is: Packet capture on the egress wire contains the intended DSCP marking for correctly classified traffic.

Question 483

During a network architecture troubleshooting workshop, an HPE Juniper Networking engineer investigates this situation: Traffic receives the correct internal forwarding class but downstream routers classify it as best effort because the outgoing packet still has its old DSCP value. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?

  1. Per-queue counters increment on the intended queue for representative classified packets.
  2. High-PLP packets experience the expected early-drop tendency while low-PLP packets are better protected.
  3. Packet capture on the egress wire contains the intended DSCP marking for correctly classified traffic.
  4. Burst tests show bounded occupancy and materially fewer drops without violating other class allocations.

Explanation

Correct Answer

C:

Packet capture on the egress wire contains the intended DSCP marking for correctly classified traffic. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: A rewrite rule maps internal forwarding treatment back to a packet header field for the downstream domain.

Incorrect Answers

A:

Per-queue counters increment on the intended queue for representative classified packets. This is a plausible observed evidence for a different Class of Service (CoS) condition, specifically Forwarding class queue mapping. The forwarding class connects classification results to an output queue; correct DSCP alone does not guarantee that queue mapping. In this scenario, however, the distinguishing issue is DSCP rewrite at egress and the confirming observation is: Packet capture on the egress wire contains the intended DSCP marking for correctly classified traffic.

B:

High-PLP packets experience the expected early-drop tendency while low-PLP packets are better protected. This is a plausible observed evidence for a different Class of Service (CoS) condition, specifically Loss priority distinction. Forwarding class chooses a queue while packet loss priority influences the packet's discard preference under congestion. In this scenario, however, the distinguishing issue is DSCP rewrite at egress and the confirming observation is: Packet capture on the egress wire contains the intended DSCP marking for correctly classified traffic.

D:

Burst tests show bounded occupancy and materially fewer drops without violating other class allocations. This is a plausible observed evidence for a different Class of Service (CoS) condition, specifically Scheduler queue buffer exhaustion. Scheduler settings govern buffer as well as bandwidth and priority, so transmit rate alone does not absorb short bursts. In this scenario, however, the distinguishing issue is DSCP rewrite at egress and the confirming observation is: Packet capture on the egress wire contains the intended DSCP marking for correctly classified traffic.

Question 484

During an inter-POP failover test, an HPE Juniper Networking engineer investigates this situation: Traffic receives the correct internal forwarding class but downstream routers classify it as best effort because the outgoing packet still has its old DSCP value. Which response or focused corrective action best addresses this situation without changing unrelated components?

  1. Correct the forwarding-class mapping to the supported target output queue.
  2. Configure consistent PLP classification and compatible drop-profile handling.
  3. Tune the supported queue buffer allocation for measured burst characteristics.
  4. Attach a suitable rewrite rule to the egress interface while respecting the agreed marking contract.

Explanation

Correct Answer

D:

Attach a suitable rewrite rule to the egress interface while respecting the agreed marking contract. The change addresses the root behavior described here: A rewrite rule maps internal forwarding treatment back to a packet header field for the downstream domain. Verify success with: Packet capture on the egress wire contains the intended DSCP marking for correctly classified traffic.

Incorrect Answers

A:

Correct the forwarding-class mapping to the supported target output queue. This is a plausible configuration or operational fix for a different Class of Service (CoS) condition, specifically Forwarding class queue mapping. The forwarding class connects classification results to an output queue; correct DSCP alone does not guarantee that queue mapping. In this scenario, however, the distinguishing issue is DSCP rewrite at egress and the confirming observation is: Packet capture on the egress wire contains the intended DSCP marking for correctly classified traffic.

B:

Configure consistent PLP classification and compatible drop-profile handling. This is a plausible configuration or operational fix for a different Class of Service (CoS) condition, specifically Loss priority distinction. Forwarding class chooses a queue while packet loss priority influences the packet's discard preference under congestion. In this scenario, however, the distinguishing issue is DSCP rewrite at egress and the confirming observation is: Packet capture on the egress wire contains the intended DSCP marking for correctly classified traffic.

C:

Tune the supported queue buffer allocation for measured burst characteristics. This is a plausible configuration or operational fix for a different Class of Service (CoS) condition, specifically Scheduler queue buffer exhaustion. Scheduler settings govern buffer as well as bandwidth and priority, so transmit rate alone does not absorb short bursts. In this scenario, however, the distinguishing issue is DSCP rewrite at egress and the confirming observation is: Packet capture on the egress wire contains the intended DSCP marking for correctly classified traffic.

Question 485

During a control-plane reliability review, an HPE Juniper Networking engineer investigates this situation: Traffic receives the correct internal forwarding class but downstream routers classify it as best effort because the outgoing packet still has its old DSCP value. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Confirm on-wire markings rather than only local forwarding-class counters.
  2. Include classification-to-queue trace checks in CoS regression tests.
  3. Check loss-priority boundaries across trust domains and encapsulation changes.
  4. Test microbursts with buffer and latency metrics rather than only averaged Mbps.

Explanation

Correct Answer

A:

Confirm on-wire markings rather than only local forwarding-class counters. The control limits repetition of the described root condition: A rewrite rule maps internal forwarding treatment back to a packet header field for the downstream domain. During audits, confirm: Packet capture on the egress wire contains the intended DSCP marking for correctly classified traffic.

Incorrect Answers

B:

Include classification-to-queue trace checks in CoS regression tests. This is a plausible preventive practice for a different Class of Service (CoS) condition, specifically Forwarding class queue mapping. The forwarding class connects classification results to an output queue; correct DSCP alone does not guarantee that queue mapping. In this scenario, however, the distinguishing issue is DSCP rewrite at egress and the confirming observation is: Packet capture on the egress wire contains the intended DSCP marking for correctly classified traffic.

C:

Check loss-priority boundaries across trust domains and encapsulation changes. This is a plausible preventive practice for a different Class of Service (CoS) condition, specifically Loss priority distinction. Forwarding class chooses a queue while packet loss priority influences the packet's discard preference under congestion. In this scenario, however, the distinguishing issue is DSCP rewrite at egress and the confirming observation is: Packet capture on the egress wire contains the intended DSCP marking for correctly classified traffic.

D:

Test microbursts with buffer and latency metrics rather than only averaged Mbps. This is a plausible preventive practice for a different Class of Service (CoS) condition, specifically Scheduler queue buffer exhaustion. Scheduler settings govern buffer as well as bandwidth and priority, so transmit rate alone does not absorb short bursts. In this scenario, however, the distinguishing issue is DSCP rewrite at egress and the confirming observation is: Packet capture on the egress wire contains the intended DSCP marking for correctly classified traffic.

Question 486

During a customer VPN change window, an HPE Juniper Networking engineer investigates this situation: Voice traffic leaves an MPLS ingress as a correctly prioritized internal class but transit LSRs see an unexpected MPLS traffic class marking. Which targeted check most directly distinguishes the likely cause before a configuration change?

  1. Correlate queue occupancy, peak burst size and scheduler buffer allocation.
  2. Inspect the MPLS label TC field and ingress rewrite behavior independently of the payload DSCP.
  3. Identify the actual congested output interface and its per-class latency/drop metrics.
  4. Inspect supported policer exceed actions and PLP marking on out-of-profile packets.

Explanation

Correct Answer

B:

Inspect the MPLS label TC field and ingress rewrite behavior independently of the payload DSCP. This check examines the decisive condition for MPLS traffic class rewrite before any unrelated changes are made. The underlying mechanism is: MPLS-classified transport forwarding can depend on the label TC bits rather than the IP payload DSCP inside the tunnel. The confirming observation is: On-wire MPLS packets carry the intended TC and transit queues respond according to the contract.

Incorrect Answers

A:

Correlate queue occupancy, peak burst size and scheduler buffer allocation. This is a plausible diagnostic check for a different Class of Service (CoS) condition, specifically Scheduler queue buffer exhaustion. Scheduler settings govern buffer as well as bandwidth and priority, so transmit rate alone does not absorb short bursts. In this scenario, however, the distinguishing issue is MPLS traffic class rewrite and the confirming observation is: On-wire MPLS packets carry the intended TC and transit queues respond according to the contract.

C:

Identify the actual congested output interface and its per-class latency/drop metrics. This is a plausible diagnostic check for a different Class of Service (CoS) condition, specifically Traffic priority at egress bottleneck. CoS decisions that influence transmission occur at the real bottleneck; accurate classification upstream cannot reserve service at a differently configured output. In this scenario, however, the distinguishing issue is MPLS traffic class rewrite and the confirming observation is: On-wire MPLS packets carry the intended TC and transit queues respond according to the contract.

D:

Inspect supported policer exceed actions and PLP marking on out-of-profile packets. This is a plausible diagnostic check for a different Class of Service (CoS) condition, specifically Policer PLP remark. A policer can, where supported, reclassify or mark packet loss priority instead of always discarding excess traffic. In this scenario, however, the distinguishing issue is MPLS traffic class rewrite and the confirming observation is: On-wire MPLS packets carry the intended TC and transit queues respond according to the contract.

Question 487

During a core-routing migration rehearsal, an HPE Juniper Networking engineer investigates this situation: Voice traffic leaves an MPLS ingress as a correctly prioritized internal class but transit LSRs see an unexpected MPLS traffic class marking. Which routing or service mechanism best explains the reported behavior?

  1. Scheduler settings govern buffer as well as bandwidth and priority, so transmit rate alone does not absorb short bursts.
  2. CoS decisions that influence transmission occur at the real bottleneck; accurate classification upstream cannot reserve service at a differently configured output.
  3. MPLS-classified transport forwarding can depend on the label TC bits rather than the IP payload DSCP inside the tunnel.
  4. A policer can, where supported, reclassify or mark packet loss priority instead of always discarding excess traffic.

Explanation

Correct Answer

C:

MPLS-classified transport forwarding can depend on the label TC bits rather than the IP payload DSCP inside the tunnel. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: On-wire MPLS packets carry the intended TC and transit queues respond according to the contract. The targeted correction is: Configure a supported MPLS TC rewrite profile at the relevant label-imposition boundary.

Incorrect Answers

A:

Scheduler settings govern buffer as well as bandwidth and priority, so transmit rate alone does not absorb short bursts. This is a plausible protocol explanation for a different Class of Service (CoS) condition, specifically Scheduler queue buffer exhaustion. Scheduler settings govern buffer as well as bandwidth and priority, so transmit rate alone does not absorb short bursts. In this scenario, however, the distinguishing issue is MPLS traffic class rewrite and the confirming observation is: On-wire MPLS packets carry the intended TC and transit queues respond according to the contract.

B:

CoS decisions that influence transmission occur at the real bottleneck; accurate classification upstream cannot reserve service at a differently configured output. This is a plausible protocol explanation for a different Class of Service (CoS) condition, specifically Traffic priority at egress bottleneck. CoS decisions that influence transmission occur at the real bottleneck; accurate classification upstream cannot reserve service at a differently configured output. In this scenario, however, the distinguishing issue is MPLS traffic class rewrite and the confirming observation is: On-wire MPLS packets carry the intended TC and transit queues respond according to the contract.

D:

A policer can, where supported, reclassify or mark packet loss priority instead of always discarding excess traffic. This is a plausible protocol explanation for a different Class of Service (CoS) condition, specifically Policer PLP remark. A policer can, where supported, reclassify or mark packet loss priority instead of always discarding excess traffic. In this scenario, however, the distinguishing issue is MPLS traffic class rewrite and the confirming observation is: On-wire MPLS packets carry the intended TC and transit queues respond according to the contract.

Question 488

During a backbone POP acceptance review, an HPE Juniper Networking engineer investigates this situation: Voice traffic leaves an MPLS ingress as a correctly prioritized internal class but transit LSRs see an unexpected MPLS traffic class marking. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?

  1. Burst tests show bounded occupancy and materially fewer drops without violating other class allocations.
  2. Latency improves when the bottleneck's queue allocation protects the approved traffic class.
  3. The intermediate hop assigns the expected forwarding class and the service no longer degrades at that link.
  4. On-wire MPLS packets carry the intended TC and transit queues respond according to the contract.

Explanation

Correct Answer

D:

On-wire MPLS packets carry the intended TC and transit queues respond according to the contract. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: MPLS-classified transport forwarding can depend on the label TC bits rather than the IP payload DSCP inside the tunnel.

Incorrect Answers

A:

Burst tests show bounded occupancy and materially fewer drops without violating other class allocations. This is a plausible observed evidence for a different Class of Service (CoS) condition, specifically Scheduler queue buffer exhaustion. Scheduler settings govern buffer as well as bandwidth and priority, so transmit rate alone does not absorb short bursts. In this scenario, however, the distinguishing issue is MPLS traffic class rewrite and the confirming observation is: On-wire MPLS packets carry the intended TC and transit queues respond according to the contract.

B:

Latency improves when the bottleneck's queue allocation protects the approved traffic class. This is a plausible observed evidence for a different Class of Service (CoS) condition, specifically Traffic priority at egress bottleneck. CoS decisions that influence transmission occur at the real bottleneck; accurate classification upstream cannot reserve service at a differently configured output. In this scenario, however, the distinguishing issue is MPLS traffic class rewrite and the confirming observation is: On-wire MPLS packets carry the intended TC and transit queues respond according to the contract.

C:

The intermediate hop assigns the expected forwarding class and the service no longer degrades at that link. This is a plausible observed evidence for a different Class of Service (CoS) condition, specifically BA mapping inconsistent across core. Each hop's classifier interprets the markings it receives, and inconsistent BA maps can break end-to-end class treatment. In this scenario, however, the distinguishing issue is MPLS traffic class rewrite and the confirming observation is: On-wire MPLS packets carry the intended TC and transit queues respond according to the contract.

Question 489

During an overnight NOC investigation, an HPE Juniper Networking engineer investigates this situation: Voice traffic leaves an MPLS ingress as a correctly prioritized internal class but transit LSRs see an unexpected MPLS traffic class marking. Which response or focused corrective action best addresses this situation without changing unrelated components?

  1. Configure a supported MPLS TC rewrite profile at the relevant label-imposition boundary.
  2. Apply coherent end-to-end queue treatment to the observed bottleneck interface.
  3. Tune the supported queue buffer allocation for measured burst characteristics.
  4. Align the intermediate classifier or rewrite contract with the provider's end-to-end marking profile.

Explanation

Correct Answer

A:

Configure a supported MPLS TC rewrite profile at the relevant label-imposition boundary. The change addresses the root behavior described here: MPLS-classified transport forwarding can depend on the label TC bits rather than the IP payload DSCP inside the tunnel. Verify success with: On-wire MPLS packets carry the intended TC and transit queues respond according to the contract.

Incorrect Answers

B:

Apply coherent end-to-end queue treatment to the observed bottleneck interface. This is a plausible configuration or operational fix for a different Class of Service (CoS) condition, specifically Traffic priority at egress bottleneck. CoS decisions that influence transmission occur at the real bottleneck; accurate classification upstream cannot reserve service at a differently configured output. In this scenario, however, the distinguishing issue is MPLS traffic class rewrite and the confirming observation is: On-wire MPLS packets carry the intended TC and transit queues respond according to the contract.

C:

Tune the supported queue buffer allocation for measured burst characteristics. This is a plausible configuration or operational fix for a different Class of Service (CoS) condition, specifically Scheduler queue buffer exhaustion. Scheduler settings govern buffer as well as bandwidth and priority, so transmit rate alone does not absorb short bursts. In this scenario, however, the distinguishing issue is MPLS traffic class rewrite and the confirming observation is: On-wire MPLS packets carry the intended TC and transit queues respond according to the contract.

D:

Align the intermediate classifier or rewrite contract with the provider's end-to-end marking profile. This is a plausible configuration or operational fix for a different Class of Service (CoS) condition, specifically BA mapping inconsistent across core. Each hop's classifier interprets the markings it receives, and inconsistent BA maps can break end-to-end class treatment. In this scenario, however, the distinguishing issue is MPLS traffic class rewrite and the confirming observation is: On-wire MPLS packets carry the intended TC and transit queues respond according to the contract.

Question 490

During a customer service restoration, an HPE Juniper Networking engineer investigates this situation: Voice traffic leaves an MPLS ingress as a correctly prioritized internal class but transit LSRs see an unexpected MPLS traffic class marking. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Trace classification and scheduling at every congested hop during service acceptance.
  2. Test CoS treatment on both labeled and unlabeled segments.
  3. Test microbursts with buffer and latency metrics rather than only averaged Mbps.
  4. Audit class mappings at inter-POP boundaries and after line-card replacements.

Explanation

Correct Answer

B:

Test CoS treatment on both labeled and unlabeled segments. The control limits repetition of the described root condition: MPLS-classified transport forwarding can depend on the label TC bits rather than the IP payload DSCP inside the tunnel. During audits, confirm: On-wire MPLS packets carry the intended TC and transit queues respond according to the contract.

Incorrect Answers

A:

Trace classification and scheduling at every congested hop during service acceptance. This is a plausible preventive practice for a different Class of Service (CoS) condition, specifically Traffic priority at egress bottleneck. CoS decisions that influence transmission occur at the real bottleneck; accurate classification upstream cannot reserve service at a differently configured output. In this scenario, however, the distinguishing issue is MPLS traffic class rewrite and the confirming observation is: On-wire MPLS packets carry the intended TC and transit queues respond according to the contract.

C:

Test microbursts with buffer and latency metrics rather than only averaged Mbps. This is a plausible preventive practice for a different Class of Service (CoS) condition, specifically Scheduler queue buffer exhaustion. Scheduler settings govern buffer as well as bandwidth and priority, so transmit rate alone does not absorb short bursts. In this scenario, however, the distinguishing issue is MPLS traffic class rewrite and the confirming observation is: On-wire MPLS packets carry the intended TC and transit queues respond according to the contract.

D:

Audit class mappings at inter-POP boundaries and after line-card replacements. This is a plausible preventive practice for a different Class of Service (CoS) condition, specifically BA mapping inconsistent across core. Each hop's classifier interprets the markings it receives, and inconsistent BA maps can break end-to-end class treatment. In this scenario, however, the distinguishing issue is MPLS traffic class rewrite and the confirming observation is: On-wire MPLS packets carry the intended TC and transit queues respond according to the contract.


Service Provider Routing and Switching, Professional (JNCIP-SP) (JN0-664) Practice Tests

Purchase Individually

JN0-664 Premium File

Premium File
JN0-664 Premium File
96 Q&A
$76.99$69.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.