Pass Your Juniper JN0-664 Exam Easy!

Juniper JN0-664 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

JN0-664 Premium VCE File

Juniper JN0-664 Premium File

96 Questions & Answers

Last Update: Oct 12, 2026

$69.99

JN0-664 Bundle gives you unlimited access to "JN0-664" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
JN0-664 Premium VCE File
Juniper JN0-664 Premium File

96 Questions & Answers

Last Update: Oct 12, 2026

$69.99

Juniper JN0-664 Exam Bundle gives you unlimited access to "JN0-664" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

Juniper JN0-664 Practice Test 17

Question 160

During a high-availability validation, an HPE Juniper Networking engineer investigates this situation: During an upgrade, a Junos router's links are physically up but other routers deliberately avoid using it as a transit node. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Alert on low remaining LSP lifetime and repeated originator refresh failures.
  2. Validate NET area IDs and system-ID uniqueness during site changes.
  3. Enforce system-ID uniqueness checks in provisioning inventories.
  4. Pair overload-bit deployment with a documented recovery criterion.

Explanation

Correct Answer

D:

Pair overload-bit deployment with a documented recovery criterion. The control limits repetition of the described root condition: Setting the overload bit tells other routers not to use the node as a transit while maintaining some reachability during planned maintenance. During audits, confirm: The node is absent from selected transit paths while the overload state is asserted, then returns when cleared.

Incorrect Answers

A:

Alert on low remaining LSP lifetime and repeated originator refresh failures. This is a plausible preventive practice for a different IS-IS condition, specifically IS-IS LSP lifetime expiry. IS-IS link-state reachability requires periodic refresh before remaining lifetime expires. In this scenario, however, the distinguishing issue is IS-IS overload bit maintenance and the confirming observation is: The node is absent from selected transit paths while the overload state is asserted, then returns when cleared.

B:

Validate NET area IDs and system-ID uniqueness during site changes. This is a plausible preventive practice for a different IS-IS condition, specifically Level 1 area-address mismatch. Level 1 adjacencies require compatible common area identity, while Level 2 supports connectivity between areas. In this scenario, however, the distinguishing issue is IS-IS overload bit maintenance and the confirming observation is: The node is absent from selected transit paths while the overload state is asserted, then returns when cleared.

C:

Enforce system-ID uniqueness checks in provisioning inventories. This is a plausible preventive practice for a different IS-IS condition, specifically IS-IS NET system ID collision. The system ID must uniquely identify each IS-IS router; area equality does not make duplicate system IDs safe. In this scenario, however, the distinguishing issue is IS-IS overload bit maintenance and the confirming observation is: The node is absent from selected transit paths while the overload state is asserted, then returns when cleared.

Question 161

During a metro aggregation incident, an HPE Juniper Networking engineer investigates this situation: A multi-access IS-IS segment has an unexpected designated intermediate system after a new node joins, changing pseudonode advertisements. Which targeted check most directly distinguishes the likely cause before a configuration change?

  1. Compare IS-IS LAN priorities and the elected DIS at each supported level.
  2. Inspect enabled IS-IS address-family reachability and the IPv6 TLVs in LSPs.
  3. Inspect the ATT indication and default-route behavior originating from the L1/L2 boundary.
  4. Inspect the overload bit in the router's IS-IS LSP and the configured maintenance state.

Explanation

Correct Answer

A:

Compare IS-IS LAN priorities and the elected DIS at each supported level. This check examines the decisive condition for Designated IS election on LAN before any unrelated changes are made. The underlying mechanism is: IS-IS elects a DIS to represent the LAN as a pseudonode, with priority and tie-breaking rules that differ from OSPF DR behavior. The confirming observation is: The expected DIS originates the pseudonode LSP and the LAN neighbor set is stable.

Incorrect Answers

B:

Inspect enabled IS-IS address-family reachability and the IPv6 TLVs in LSPs. This is a plausible diagnostic check for a different IS-IS condition, specifically IPv6 IS-IS reachability absent. A healthy IS-IS adjacency for one protocol does not itself prove the relevant IPv6 reachability TLVs are being advertised. In this scenario, however, the distinguishing issue is Designated IS election on LAN and the confirming observation is: The expected DIS originates the pseudonode LSP and the LAN neighbor set is stable.

C:

Inspect the ATT indication and default-route behavior originating from the L1/L2 boundary. This is a plausible diagnostic check for a different IS-IS condition, specifically L1/L2 ATT default direction. The IS-IS attached bit advertises that an L1/L2 router can provide exit reachability for an L1 area when conditions are met. In this scenario, however, the distinguishing issue is Designated IS election on LAN and the confirming observation is: The expected DIS originates the pseudonode LSP and the LAN neighbor set is stable.

D:

Inspect the overload bit in the router's IS-IS LSP and the configured maintenance state. This is a plausible diagnostic check for a different IS-IS condition, specifically IS-IS overload bit maintenance. Setting the overload bit tells other routers not to use the node as a transit while maintaining some reachability during planned maintenance. In this scenario, however, the distinguishing issue is Designated IS election on LAN and the confirming observation is: The expected DIS originates the pseudonode LSP and the LAN neighbor set is stable.

Question 162

During a managed service audit, an HPE Juniper Networking engineer investigates this situation: A multi-access IS-IS segment has an unexpected designated intermediate system after a new node joins, changing pseudonode advertisements. Which routing or service mechanism best explains the reported behavior?

  1. The IS-IS attached bit advertises that an L1/L2 router can provide exit reachability for an L1 area when conditions are met.
  2. IS-IS elects a DIS to represent the LAN as a pseudonode, with priority and tie-breaking rules that differ from OSPF DR behavior.
  3. A healthy IS-IS adjacency for one protocol does not itself prove the relevant IPv6 reachability TLVs are being advertised.
  4. The system ID must uniquely identify each IS-IS router; area equality does not make duplicate system IDs safe.

Explanation

Correct Answer

B:

IS-IS elects a DIS to represent the LAN as a pseudonode, with priority and tie-breaking rules that differ from OSPF DR behavior. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: The expected DIS originates the pseudonode LSP and the LAN neighbor set is stable. The targeted correction is: Set the intended LAN DIS priority consistently for the planned level and verify election state.

Incorrect Answers

A:

The IS-IS attached bit advertises that an L1/L2 router can provide exit reachability for an L1 area when conditions are met. This is a plausible protocol explanation for a different IS-IS condition, specifically L1/L2 ATT default direction. The IS-IS attached bit advertises that an L1/L2 router can provide exit reachability for an L1 area when conditions are met. In this scenario, however, the distinguishing issue is Designated IS election on LAN and the confirming observation is: The expected DIS originates the pseudonode LSP and the LAN neighbor set is stable.

C:

A healthy IS-IS adjacency for one protocol does not itself prove the relevant IPv6 reachability TLVs are being advertised. This is a plausible protocol explanation for a different IS-IS condition, specifically IPv6 IS-IS reachability absent. A healthy IS-IS adjacency for one protocol does not itself prove the relevant IPv6 reachability TLVs are being advertised. In this scenario, however, the distinguishing issue is Designated IS election on LAN and the confirming observation is: The expected DIS originates the pseudonode LSP and the LAN neighbor set is stable.

D:

The system ID must uniquely identify each IS-IS router; area equality does not make duplicate system IDs safe. This is a plausible protocol explanation for a different IS-IS condition, specifically IS-IS NET system ID collision. The system ID must uniquely identify each IS-IS router; area equality does not make duplicate system IDs safe. In this scenario, however, the distinguishing issue is Designated IS election on LAN and the confirming observation is: The expected DIS originates the pseudonode LSP and the LAN neighbor set is stable.

Question 163

During a network architecture troubleshooting workshop, an HPE Juniper Networking engineer investigates this situation: A multi-access IS-IS segment has an unexpected designated intermediate system after a new node joins, changing pseudonode advertisements. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?

  1. The attached-bit signaling and the L1 default route track the intended L2 reachability.
  2. The neighboring L2 LSDB and IPv6 RIB contain the approved IPv6 prefixes once support is configured.
  3. The expected DIS originates the pseudonode LSP and the LAN neighbor set is stable.
  4. Unique system IDs produce distinct LSP originators and stable neighbor database entries.

Explanation

Correct Answer

C:

The expected DIS originates the pseudonode LSP and the LAN neighbor set is stable. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: IS-IS elects a DIS to represent the LAN as a pseudonode, with priority and tie-breaking rules that differ from OSPF DR behavior.

Incorrect Answers

A:

The attached-bit signaling and the L1 default route track the intended L2 reachability. This is a plausible observed evidence for a different IS-IS condition, specifically L1/L2 ATT default direction. The IS-IS attached bit advertises that an L1/L2 router can provide exit reachability for an L1 area when conditions are met. In this scenario, however, the distinguishing issue is Designated IS election on LAN and the confirming observation is: The expected DIS originates the pseudonode LSP and the LAN neighbor set is stable.

B:

The neighboring L2 LSDB and IPv6 RIB contain the approved IPv6 prefixes once support is configured. This is a plausible observed evidence for a different IS-IS condition, specifically IPv6 IS-IS reachability absent. A healthy IS-IS adjacency for one protocol does not itself prove the relevant IPv6 reachability TLVs are being advertised. In this scenario, however, the distinguishing issue is Designated IS election on LAN and the confirming observation is: The expected DIS originates the pseudonode LSP and the LAN neighbor set is stable.

D:

Unique system IDs produce distinct LSP originators and stable neighbor database entries. This is a plausible observed evidence for a different IS-IS condition, specifically IS-IS NET system ID collision. The system ID must uniquely identify each IS-IS router; area equality does not make duplicate system IDs safe. In this scenario, however, the distinguishing issue is Designated IS election on LAN and the confirming observation is: The expected DIS originates the pseudonode LSP and the LAN neighbor set is stable.

Question 164

During an inter-POP failover test, an HPE Juniper Networking engineer investigates this situation: A multi-access IS-IS segment has an unexpected designated intermediate system after a new node joins, changing pseudonode advertisements. Which response or focused corrective action best addresses this situation without changing unrelated components?

  1. Correct the L1/L2 area exit and attached-bit advertisement conditions rather than injecting unrelated host routes.
  2. Enable compatible IPv6 IS-IS reachability for the intended level and check end-to-end next hops.
  3. Enable supported dynamic hostname advertisement and maintain reliable naming inventory.
  4. Set the intended LAN DIS priority consistently for the planned level and verify election state.

Explanation

Correct Answer

D:

Set the intended LAN DIS priority consistently for the planned level and verify election state. The change addresses the root behavior described here: IS-IS elects a DIS to represent the LAN as a pseudonode, with priority and tie-breaking rules that differ from OSPF DR behavior. Verify success with: The expected DIS originates the pseudonode LSP and the LAN neighbor set is stable.

Incorrect Answers

A:

Correct the L1/L2 area exit and attached-bit advertisement conditions rather than injecting unrelated host routes. This is a plausible configuration or operational fix for a different IS-IS condition, specifically L1/L2 ATT default direction. The IS-IS attached bit advertises that an L1/L2 router can provide exit reachability for an L1 area when conditions are met. In this scenario, however, the distinguishing issue is Designated IS election on LAN and the confirming observation is: The expected DIS originates the pseudonode LSP and the LAN neighbor set is stable.

B:

Enable compatible IPv6 IS-IS reachability for the intended level and check end-to-end next hops. This is a plausible configuration or operational fix for a different IS-IS condition, specifically IPv6 IS-IS reachability absent. A healthy IS-IS adjacency for one protocol does not itself prove the relevant IPv6 reachability TLVs are being advertised. In this scenario, however, the distinguishing issue is Designated IS election on LAN and the confirming observation is: The expected DIS originates the pseudonode LSP and the LAN neighbor set is stable.

C:

Enable supported dynamic hostname advertisement and maintain reliable naming inventory. This is a plausible configuration or operational fix for a different IS-IS condition, specifically IS-IS hostname visibility. Dynamic hostname information can provide human-readable identifiers, but protocol reachability still uses system IDs. In this scenario, however, the distinguishing issue is Designated IS election on LAN and the confirming observation is: The expected DIS originates the pseudonode LSP and the LAN neighbor set is stable.

Question 165

During a control-plane reliability review, an HPE Juniper Networking engineer investigates this situation: A multi-access IS-IS segment has an unexpected designated intermediate system after a new node joins, changing pseudonode advertisements. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Audit pseudonode LSP origin after LAN membership changes.
  2. Monitor attached-bit and default-route behavior when L2 isolation is simulated.
  3. Track IPv4 and IPv6 reachability independently during routing expansions.
  4. Keep router IDs, system IDs and hostnames mapped in operations documentation.

Explanation

Correct Answer

A:

Audit pseudonode LSP origin after LAN membership changes. The control limits repetition of the described root condition: IS-IS elects a DIS to represent the LAN as a pseudonode, with priority and tie-breaking rules that differ from OSPF DR behavior. During audits, confirm: The expected DIS originates the pseudonode LSP and the LAN neighbor set is stable.

Incorrect Answers

B:

Monitor attached-bit and default-route behavior when L2 isolation is simulated. This is a plausible preventive practice for a different IS-IS condition, specifically L1/L2 ATT default direction. The IS-IS attached bit advertises that an L1/L2 router can provide exit reachability for an L1 area when conditions are met. In this scenario, however, the distinguishing issue is Designated IS election on LAN and the confirming observation is: The expected DIS originates the pseudonode LSP and the LAN neighbor set is stable.

C:

Track IPv4 and IPv6 reachability independently during routing expansions. This is a plausible preventive practice for a different IS-IS condition, specifically IPv6 IS-IS reachability absent. A healthy IS-IS adjacency for one protocol does not itself prove the relevant IPv6 reachability TLVs are being advertised. In this scenario, however, the distinguishing issue is Designated IS election on LAN and the confirming observation is: The expected DIS originates the pseudonode LSP and the LAN neighbor set is stable.

D:

Keep router IDs, system IDs and hostnames mapped in operations documentation. This is a plausible preventive practice for a different IS-IS condition, specifically IS-IS hostname visibility. Dynamic hostname information can provide human-readable identifiers, but protocol reachability still uses system IDs. In this scenario, however, the distinguishing issue is Designated IS election on LAN and the confirming observation is: The expected DIS originates the pseudonode LSP and the LAN neighbor set is stable.

Question 166

During a customer VPN change window, an HPE Juniper Networking engineer investigates this situation: Routers on a shared IS-IS Ethernet link see neighbors but topology calculations omit a network link when the LAN's pseudonode advertisement is missing. Which targeted check most directly distinguishes the likely cause before a configuration change?

  1. Compare each router's NET area addresses and the level-specific adjacency state.
  2. Examine the elected DIS and the pseudonode LSP in the level-specific link-state database.
  3. Inspect whether hostname information is advertised and resolvable for the participating IS-IS systems.
  4. Compare the six-byte system-ID portions of each router's ISO NET and origin IDs in the LSDB.

Explanation

Correct Answer

B:

Examine the elected DIS and the pseudonode LSP in the level-specific link-state database. This check examines the decisive condition for IS-IS pseudonode LSP missing before any unrelated changes are made. The underlying mechanism is: The DIS represents a multi-access LAN through a pseudonode LSP that helps other routers build the same graph. The confirming observation is: The pseudonode LSP is present and shortest-path calculations include the shared segment.

Incorrect Answers

A:

Compare each router's NET area addresses and the level-specific adjacency state. This is a plausible diagnostic check for a different IS-IS condition, specifically Level 1 area-address mismatch. Level 1 adjacencies require compatible common area identity, while Level 2 supports connectivity between areas. In this scenario, however, the distinguishing issue is IS-IS pseudonode LSP missing and the confirming observation is: The pseudonode LSP is present and shortest-path calculations include the shared segment.

C:

Inspect whether hostname information is advertised and resolvable for the participating IS-IS systems. This is a plausible diagnostic check for a different IS-IS condition, specifically IS-IS hostname visibility. Dynamic hostname information can provide human-readable identifiers, but protocol reachability still uses system IDs. In this scenario, however, the distinguishing issue is IS-IS pseudonode LSP missing and the confirming observation is: The pseudonode LSP is present and shortest-path calculations include the shared segment.

D:

Compare the six-byte system-ID portions of each router's ISO NET and origin IDs in the LSDB. This is a plausible diagnostic check for a different IS-IS condition, specifically IS-IS NET system ID collision. The system ID must uniquely identify each IS-IS router; area equality does not make duplicate system IDs safe. In this scenario, however, the distinguishing issue is IS-IS pseudonode LSP missing and the confirming observation is: The pseudonode LSP is present and shortest-path calculations include the shared segment.

Question 167

During a core-routing migration rehearsal, an HPE Juniper Networking engineer investigates this situation: Routers on a shared IS-IS Ethernet link see neighbors but topology calculations omit a network link when the LAN's pseudonode advertisement is missing. Which routing or service mechanism best explains the reported behavior?

  1. Level 1 adjacencies require compatible common area identity, while Level 2 supports connectivity between areas.
  2. Dynamic hostname information can provide human-readable identifiers, but protocol reachability still uses system IDs.
  3. The DIS represents a multi-access LAN through a pseudonode LSP that helps other routers build the same graph.
  4. The system ID must uniquely identify each IS-IS router; area equality does not make duplicate system IDs safe.

Explanation

Correct Answer

C:

The DIS represents a multi-access LAN through a pseudonode LSP that helps other routers build the same graph. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: The pseudonode LSP is present and shortest-path calculations include the shared segment. The targeted correction is: Restore healthy DIS LSP generation and synchronization before modifying metric policy.

Incorrect Answers

A:

Level 1 adjacencies require compatible common area identity, while Level 2 supports connectivity between areas. This is a plausible protocol explanation for a different IS-IS condition, specifically Level 1 area-address mismatch. Level 1 adjacencies require compatible common area identity, while Level 2 supports connectivity between areas. In this scenario, however, the distinguishing issue is IS-IS pseudonode LSP missing and the confirming observation is: The pseudonode LSP is present and shortest-path calculations include the shared segment.

B:

Dynamic hostname information can provide human-readable identifiers, but protocol reachability still uses system IDs. This is a plausible protocol explanation for a different IS-IS condition, specifically IS-IS hostname visibility. Dynamic hostname information can provide human-readable identifiers, but protocol reachability still uses system IDs. In this scenario, however, the distinguishing issue is IS-IS pseudonode LSP missing and the confirming observation is: The pseudonode LSP is present and shortest-path calculations include the shared segment.

D:

The system ID must uniquely identify each IS-IS router; area equality does not make duplicate system IDs safe. This is a plausible protocol explanation for a different IS-IS condition, specifically IS-IS NET system ID collision. The system ID must uniquely identify each IS-IS router; area equality does not make duplicate system IDs safe. In this scenario, however, the distinguishing issue is IS-IS pseudonode LSP missing and the confirming observation is: The pseudonode LSP is present and shortest-path calculations include the shared segment.

Question 168

During a backbone POP acceptance review, an HPE Juniper Networking engineer investigates this situation: Routers on a shared IS-IS Ethernet link see neighbors but topology calculations omit a network link when the LAN's pseudonode advertisement is missing. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?

  1. The Level 1 state comes up when compatible area identifiers are configured for routers expected to share an area.
  2. Neighbor output maps each system ID to the expected device name while link-state convergence remains unchanged.
  3. Unique system IDs produce distinct LSP originators and stable neighbor database entries.
  4. The pseudonode LSP is present and shortest-path calculations include the shared segment.

Explanation

Correct Answer

D:

The pseudonode LSP is present and shortest-path calculations include the shared segment. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: The DIS represents a multi-access LAN through a pseudonode LSP that helps other routers build the same graph.

Incorrect Answers

A:

The Level 1 state comes up when compatible area identifiers are configured for routers expected to share an area. This is a plausible observed evidence for a different IS-IS condition, specifically Level 1 area-address mismatch. Level 1 adjacencies require compatible common area identity, while Level 2 supports connectivity between areas. In this scenario, however, the distinguishing issue is IS-IS pseudonode LSP missing and the confirming observation is: The pseudonode LSP is present and shortest-path calculations include the shared segment.

B:

Neighbor output maps each system ID to the expected device name while link-state convergence remains unchanged. This is a plausible observed evidence for a different IS-IS condition, specifically IS-IS hostname visibility. Dynamic hostname information can provide human-readable identifiers, but protocol reachability still uses system IDs. In this scenario, however, the distinguishing issue is IS-IS pseudonode LSP missing and the confirming observation is: The pseudonode LSP is present and shortest-path calculations include the shared segment.

C:

Unique system IDs produce distinct LSP originators and stable neighbor database entries. This is a plausible observed evidence for a different IS-IS condition, specifically IS-IS NET system ID collision. The system ID must uniquely identify each IS-IS router; area equality does not make duplicate system IDs safe. In this scenario, however, the distinguishing issue is IS-IS pseudonode LSP missing and the confirming observation is: The pseudonode LSP is present and shortest-path calculations include the shared segment.

Question 169

During an overnight NOC investigation, an HPE Juniper Networking engineer investigates this situation: Routers on a shared IS-IS Ethernet link see neighbors but topology calculations omit a network link when the LAN's pseudonode advertisement is missing. Which response or focused corrective action best addresses this situation without changing unrelated components?

  1. Restore healthy DIS LSP generation and synchronization before modifying metric policy.
  2. Align the area portion of the NET for intended Level 1 neighbors or keep only correct interarea Level 2 operation.
  3. Disable the unneeded IS-IS level on the device or interface according to its network role.
  4. Enable supported dynamic hostname advertisement and maintain reliable naming inventory.

Explanation

Correct Answer

A:

Restore healthy DIS LSP generation and synchronization before modifying metric policy. The change addresses the root behavior described here: The DIS represents a multi-access LAN through a pseudonode LSP that helps other routers build the same graph. Verify success with: The pseudonode LSP is present and shortest-path calculations include the shared segment.

Incorrect Answers

B:

Align the area portion of the NET for intended Level 1 neighbors or keep only correct interarea Level 2 operation. This is a plausible configuration or operational fix for a different IS-IS condition, specifically Level 1 area-address mismatch. Level 1 adjacencies require compatible common area identity, while Level 2 supports connectivity between areas. In this scenario, however, the distinguishing issue is IS-IS pseudonode LSP missing and the confirming observation is: The pseudonode LSP is present and shortest-path calculations include the shared segment.

C:

Disable the unneeded IS-IS level on the device or interface according to its network role. This is a plausible configuration or operational fix for a different IS-IS condition, specifically Default dual-level operation. Junos can enable both IS-IS levels by default unless one level is explicitly disabled. In this scenario, however, the distinguishing issue is IS-IS pseudonode LSP missing and the confirming observation is: The pseudonode LSP is present and shortest-path calculations include the shared segment.

D:

Enable supported dynamic hostname advertisement and maintain reliable naming inventory. This is a plausible configuration or operational fix for a different IS-IS condition, specifically IS-IS hostname visibility. Dynamic hostname information can provide human-readable identifiers, but protocol reachability still uses system IDs. In this scenario, however, the distinguishing issue is IS-IS pseudonode LSP missing and the confirming observation is: The pseudonode LSP is present and shortest-path calculations include the shared segment.

Question 170

During a customer service restoration, an HPE Juniper Networking engineer investigates this situation: Routers on a shared IS-IS Ethernet link see neighbors but topology calculations omit a network link when the LAN's pseudonode advertisement is missing. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Add family iso configuration to validated IS-IS circuit templates.
  2. Monitor pseudonode LSP aging during DIS changes.
  3. Review level defaults in provisioning templates rather than assuming interfaces start at Level 1 only.
  4. Keep router IDs, system IDs and hostnames mapped in operations documentation.

Explanation

Correct Answer

B:

Monitor pseudonode LSP aging during DIS changes. The control limits repetition of the described root condition: The DIS represents a multi-access LAN through a pseudonode LSP that helps other routers build the same graph. During audits, confirm: The pseudonode LSP is present and shortest-path calculations include the shared segment.

Incorrect Answers

A:

Add family iso configuration to validated IS-IS circuit templates. This is a plausible preventive practice for a different IS-IS condition, specifically ISO family omission. Junos IS-IS control frames need ISO family support on participating interfaces independently of IPv4 addressing. In this scenario, however, the distinguishing issue is IS-IS pseudonode LSP missing and the confirming observation is: The pseudonode LSP is present and shortest-path calculations include the shared segment.

C:

Review level defaults in provisioning templates rather than assuming interfaces start at Level 1 only. This is a plausible preventive practice for a different IS-IS condition, specifically Default dual-level operation. Junos can enable both IS-IS levels by default unless one level is explicitly disabled. In this scenario, however, the distinguishing issue is IS-IS pseudonode LSP missing and the confirming observation is: The pseudonode LSP is present and shortest-path calculations include the shared segment.

D:

Keep router IDs, system IDs and hostnames mapped in operations documentation. This is a plausible preventive practice for a different IS-IS condition, specifically IS-IS hostname visibility. Dynamic hostname information can provide human-readable identifiers, but protocol reachability still uses system IDs. In this scenario, however, the distinguishing issue is IS-IS pseudonode LSP missing and the confirming observation is: The pseudonode LSP is present and shortest-path calculations include the shared segment.


Service Provider Routing and Switching, Professional (JNCIP-SP) (JN0-664) Practice Tests

Purchase Individually

JN0-664 Premium File

Premium File
JN0-664 Premium File
96 Q&A
$76.99$69.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.