Pass Your Juniper JN0-664 Exam Easy!

Juniper JN0-664 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

JN0-664 Premium VCE File

Juniper JN0-664 Premium File

96 Questions & Answers

Last Update: Oct 12, 2026

$69.99

JN0-664 Bundle gives you unlimited access to "JN0-664" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
JN0-664 Premium VCE File
Juniper JN0-664 Premium File

96 Questions & Answers

Last Update: Oct 12, 2026

$69.99

Juniper JN0-664 Exam Bundle gives you unlimited access to "JN0-664" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

Juniper JN0-664 Practice Test 13

Question 120

During a service-provider escalation, an HPE Juniper Networking engineer investigates this situation: Following a failure of the elected OSPF DR, the broadcast network experiences a prolonged outage because operators repeatedly clear all OSPF neighbors. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Include interface MTU parity and the neighbor Full state in standard link acceptance tests.
  2. Audit OSPF interface timers during template deployment and route maintenance.
  3. Monitor LSDB freshness and SPF processing during periods of churn.
  4. Test DR failure in maintenance windows and record preferred backup priorities.

Explanation

Correct Answer

D:

Test DR failure in maintenance windows and record preferred backup priorities. The control limits repetition of the described root condition: OSPF uses an elected backup designated router to support a controlled transition on broadcast segments. During audits, confirm: The former BDR assumes DR responsibility and eligible neighbors reach the expected Full state without widespread clearing.

Incorrect Answers

A:

Include interface MTU parity and the neighbor Full state in standard link acceptance tests. This is a plausible preventive practice for a different OSPF condition, specifically OSPF MTU adjacency ExStart. Inconsistent MTU handling can prevent successful OSPF database description exchange despite matching Hello parameters. In this scenario, however, the distinguishing issue is DR BDR transition on LAN and the confirming observation is: The former BDR assumes DR responsibility and eligible neighbors reach the expected Full state without widespread clearing.

B:

Audit OSPF interface timers during template deployment and route maintenance. This is a plausible preventive practice for a different OSPF condition, specifically Hello/dead timer mismatch. Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency. In this scenario, however, the distinguishing issue is DR BDR transition on LAN and the confirming observation is: The former BDR assumes DR responsibility and eligible neighbors reach the expected Full state without widespread clearing.

C:

Monitor LSDB freshness and SPF processing during periods of churn. This is a plausible preventive practice for a different OSPF condition, specifically LSDB sequence-age mismatch. Link-state routes depend on consistent current LSAs and completed SPF processing, not solely on neighbor Full status. In this scenario, however, the distinguishing issue is DR BDR transition on LAN and the confirming observation is: The former BDR assumes DR responsibility and eligible neighbors reach the expected Full state without widespread clearing.

Question 121

During a core-routing migration rehearsal, an HPE Juniper Networking engineer investigates this situation: An external LSA is present but an access node cannot use the path because the forwarding address contained in the advertisement is not reachable. Which targeted check most directly distinguishes the likely cause before a configuration change?

  1. Inspect the external LSA forwarding-address field and route resolution to that address.
  2. Inspect LSA sequence numbers, age and LSDB synchronization before adjusting interface bandwidth.
  3. Inspect the ABR's area range configuration and the origin of interarea summary LSAs.
  4. Compare the source route's active state with the OSPF export policy and resulting external LSAs.

Explanation

Correct Answer

A:

Inspect the external LSA forwarding-address field and route resolution to that address. This check examines the decisive condition for OSPF external forwarding address before any unrelated changes are made. The underlying mechanism is: An advertised external destination can require reachable resolution of a nonzero forwarding address before the path is usable. The confirming observation is: The forwarding address resolves through valid internal reachability and the external route becomes eligible.

Incorrect Answers

B:

Inspect LSA sequence numbers, age and LSDB synchronization before adjusting interface bandwidth. This is a plausible diagnostic check for a different OSPF condition, specifically LSDB sequence-age mismatch. Link-state routes depend on consistent current LSAs and completed SPF processing, not solely on neighbor Full status. In this scenario, however, the distinguishing issue is OSPF external forwarding address and the confirming observation is: The forwarding address resolves through valid internal reachability and the external route becomes eligible.

C:

Inspect the ABR's area range configuration and the origin of interarea summary LSAs. This is a plausible diagnostic check for a different OSPF condition, specifically Route summarization at ABR. Interarea aggregation is performed by a suitable ABR; setting an unrelated import filter does not itself produce the expected summary. In this scenario, however, the distinguishing issue is OSPF external forwarding address and the confirming observation is: The forwarding address resolves through valid internal reachability and the external route becomes eligible.

D:

Compare the source route's active state with the OSPF export policy and resulting external LSAs. This is a plausible diagnostic check for a different OSPF condition, specifically OSPF route export policy missing. Junos OSPF does not automatically redistribute arbitrary static prefixes; an export policy must explicitly permit the route. In this scenario, however, the distinguishing issue is OSPF external forwarding address and the confirming observation is: The forwarding address resolves through valid internal reachability and the external route becomes eligible.

Question 122

During a backbone POP acceptance review, an HPE Juniper Networking engineer investigates this situation: An external LSA is present but an access node cannot use the path because the forwarding address contained in the advertisement is not reachable. Which routing or service mechanism best explains the reported behavior?

  1. Link-state routes depend on consistent current LSAs and completed SPF processing, not solely on neighbor Full status.
  2. An advertised external destination can require reachable resolution of a nonzero forwarding address before the path is usable.
  3. Interarea aggregation is performed by a suitable ABR; setting an unrelated import filter does not itself produce the expected summary.
  4. Junos OSPF does not automatically redistribute arbitrary static prefixes; an export policy must explicitly permit the route.

Explanation

Correct Answer

B:

An advertised external destination can require reachable resolution of a nonzero forwarding address before the path is usable. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: The forwarding address resolves through valid internal reachability and the external route becomes eligible. The targeted correction is: Correct the internal forwarding-address reachability or external advertisement design.

Incorrect Answers

A:

Link-state routes depend on consistent current LSAs and completed SPF processing, not solely on neighbor Full status. This is a plausible protocol explanation for a different OSPF condition, specifically LSDB sequence-age mismatch. Link-state routes depend on consistent current LSAs and completed SPF processing, not solely on neighbor Full status. In this scenario, however, the distinguishing issue is OSPF external forwarding address and the confirming observation is: The forwarding address resolves through valid internal reachability and the external route becomes eligible.

C:

Interarea aggregation is performed by a suitable ABR; setting an unrelated import filter does not itself produce the expected summary. This is a plausible protocol explanation for a different OSPF condition, specifically Route summarization at ABR. Interarea aggregation is performed by a suitable ABR; setting an unrelated import filter does not itself produce the expected summary. In this scenario, however, the distinguishing issue is OSPF external forwarding address and the confirming observation is: The forwarding address resolves through valid internal reachability and the external route becomes eligible.

D:

Junos OSPF does not automatically redistribute arbitrary static prefixes; an export policy must explicitly permit the route. This is a plausible protocol explanation for a different OSPF condition, specifically OSPF route export policy missing. Junos OSPF does not automatically redistribute arbitrary static prefixes; an export policy must explicitly permit the route. In this scenario, however, the distinguishing issue is OSPF external forwarding address and the confirming observation is: The forwarding address resolves through valid internal reachability and the external route becomes eligible.

Question 123

During an overnight NOC investigation, an HPE Juniper Networking engineer investigates this situation: An external LSA is present but an access node cannot use the path because the forwarding address contained in the advertisement is not reachable. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?

  1. The intended device shows a higher eligible priority and is elected after an appropriate election event.
  2. Both routers hold the current LSA instance and SPF results match the intended next-hop behavior.
  3. The forwarding address resolves through valid internal reachability and the external route becomes eligible.
  4. Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy.

Explanation

Correct Answer

C:

The forwarding address resolves through valid internal reachability and the external route becomes eligible. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: An advertised external destination can require reachable resolution of a nonzero forwarding address before the path is usable.

Incorrect Answers

A:

The intended device shows a higher eligible priority and is elected after an appropriate election event. This is a plausible observed evidence for a different OSPF condition, specifically Broadcast DR election priority. DR election on broadcast networks considers eligible interface priority and uses router ID for priority ties; priority zero makes a router ineligible. In this scenario, however, the distinguishing issue is OSPF external forwarding address and the confirming observation is: The forwarding address resolves through valid internal reachability and the external route becomes eligible.

B:

Both routers hold the current LSA instance and SPF results match the intended next-hop behavior. This is a plausible observed evidence for a different OSPF condition, specifically LSDB sequence-age mismatch. Link-state routes depend on consistent current LSAs and completed SPF processing, not solely on neighbor Full status. In this scenario, however, the distinguishing issue is OSPF external forwarding address and the confirming observation is: The forwarding address resolves through valid internal reachability and the external route becomes eligible.

D:

Remote areas see the aggregate summary and no unwanted individual component advertisements under the defined policy. This is a plausible observed evidence for a different OSPF condition, specifically Route summarization at ABR. Interarea aggregation is performed by a suitable ABR; setting an unrelated import filter does not itself produce the expected summary. In this scenario, however, the distinguishing issue is OSPF external forwarding address and the confirming observation is: The forwarding address resolves through valid internal reachability and the external route becomes eligible.

Question 124

During a customer service restoration, an HPE Juniper Networking engineer investigates this situation: An external LSA is present but an access node cannot use the path because the forwarding address contained in the advertisement is not reachable. Which response or focused corrective action best addresses this situation without changing unrelated components?

  1. Normalize planned costs or explicitly accept asymmetry based on tested service requirements.
  2. Select a normal transit area or redesign physical backbone connectivity instead of placing the virtual link through the stub.
  3. Set consistent interface priorities, then conduct a controlled election reset rather than assuming an existing DR is preempted immediately.
  4. Correct the internal forwarding-address reachability or external advertisement design.

Explanation

Correct Answer

D:

Correct the internal forwarding-address reachability or external advertisement design. The change addresses the root behavior described here: An advertised external destination can require reachable resolution of a nonzero forwarding address before the path is usable. Verify success with: The forwarding address resolves through valid internal reachability and the external route becomes eligible.

Incorrect Answers

A:

Normalize planned costs or explicitly accept asymmetry based on tested service requirements. This is a plausible configuration or operational fix for a different OSPF condition, specifically SPF metric asymmetry. OSPF SPF uses each router's outbound link metrics, so directional cost differences can yield asymmetric paths. In this scenario, however, the distinguishing issue is OSPF external forwarding address and the confirming observation is: The forwarding address resolves through valid internal reachability and the external route becomes eligible.

B:

Select a normal transit area or redesign physical backbone connectivity instead of placing the virtual link through the stub. This is a plausible configuration or operational fix for a different OSPF condition, specifically Virtual-link transit eligibility. A virtual link needs a valid nonstub transit area between ABRs; a stub area cannot serve as the transit. In this scenario, however, the distinguishing issue is OSPF external forwarding address and the confirming observation is: The forwarding address resolves through valid internal reachability and the external route becomes eligible.

C:

Set consistent interface priorities, then conduct a controlled election reset rather than assuming an existing DR is preempted immediately. This is a plausible configuration or operational fix for a different OSPF condition, specifically Broadcast DR election priority. DR election on broadcast networks considers eligible interface priority and uses router ID for priority ties; priority zero makes a router ineligible. In this scenario, however, the distinguishing issue is OSPF external forwarding address and the confirming observation is: The forwarding address resolves through valid internal reachability and the external route becomes eligible.

Question 125

During an edge-to-core validation, an HPE Juniper Networking engineer investigates this situation: An external LSA is present but an access node cannot use the path because the forwarding address contained in the advertisement is not reachable. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Add forwarding-address resolution to external-route acceptance tests.
  2. Validate both forwarding routes and LSDB contents during policy design reviews.
  3. Require a backbone-continuity diagram and test reachability between nonbackbone areas during changes.
  4. Model forward and return paths after interface-cost maintenance.

Explanation

Correct Answer

A:

Add forwarding-address resolution to external-route acceptance tests. The control limits repetition of the described root condition: An advertised external destination can require reachable resolution of a nonzero forwarding address before the path is usable. During audits, confirm: The forwarding address resolves through valid internal reachability and the external route becomes eligible.

Incorrect Answers

B:

Validate both forwarding routes and LSDB contents during policy design reviews. This is a plausible preventive practice for a different OSPF condition, specifically Inbound OSPF route filtering scope. A local routing-table import decision is not necessarily an LSA flooding filter in a link-state area. In this scenario, however, the distinguishing issue is OSPF external forwarding address and the confirming observation is: The forwarding address resolves through valid internal reachability and the external route becomes eligible.

C:

Require a backbone-continuity diagram and test reachability between nonbackbone areas during changes. This is a plausible preventive practice for a different OSPF condition, specifically Backbone continuity through ABR. OSPF interarea routing normally depends on a continuous area 0 backbone reached through ABRs. In this scenario, however, the distinguishing issue is OSPF external forwarding address and the confirming observation is: The forwarding address resolves through valid internal reachability and the external route becomes eligible.

D:

Model forward and return paths after interface-cost maintenance. This is a plausible preventive practice for a different OSPF condition, specifically SPF metric asymmetry. OSPF SPF uses each router's outbound link metrics, so directional cost differences can yield asymmetric paths. In this scenario, however, the distinguishing issue is OSPF external forwarding address and the confirming observation is: The forwarding address resolves through valid internal reachability and the external route becomes eligible.

Question 126

During a multisite network cutover, an HPE Juniper Networking engineer investigates this situation: A stub access area accepts the expected default from its ABR but applications still fail whenever that ABR loses upstream connectivity. Which targeted check most directly distinguishes the likely cause before a configuration change?

  1. Identify which LSA type carries the prefixes and whether they originate at an ASBR rather than an ABR.
  2. Inspect backbone reachability and actual upstream service path behind the advertised default.
  3. Compare the area's stub configuration and its LSA types with the missing external destinations.
  4. Inspect NSSA configuration and the presence and translation of type 7 LSAs at its ABR.

Explanation

Correct Answer

B:

Inspect backbone reachability and actual upstream service path behind the advertised default. This check examines the decisive condition for OSPF ABR default-route validation before any unrelated changes are made. The underlying mechanism is: Receiving an OSPF default route only indicates a routing advertisement; it does not guarantee a healthy upstream service path. The confirming observation is: End-to-end checks through the ABR succeed while its advertised default is valid and failover behavior is documented.

Incorrect Answers

A:

Identify which LSA type carries the prefixes and whether they originate at an ASBR rather than an ABR. This is a plausible diagnostic check for a different OSPF condition, specifically ASBR external aggregation. AS-external advertisements have a different summarization control point from interarea type 3 summaries. In this scenario, however, the distinguishing issue is OSPF ABR default-route validation and the confirming observation is: End-to-end checks through the ABR succeed while its advertised default is valid and failover behavior is documented.

C:

Compare the area's stub configuration and its LSA types with the missing external destinations. This is a plausible diagnostic check for a different OSPF condition, specifically Stub-area external reachability. A stub area excludes AS-external type 5 LSAs and relies on ABR-supplied reachability rather than importing individual external routes. In this scenario, however, the distinguishing issue is OSPF ABR default-route validation and the confirming observation is: End-to-end checks through the ABR succeed while its advertised default is valid and failover behavior is documented.

D:

Inspect NSSA configuration and the presence and translation of type 7 LSAs at its ABR. This is a plausible diagnostic check for a different OSPF condition, specifically NSSA external redistribution. An NSSA can carry locally redistributed externals as type 7 LSAs, which an eligible ABR translates to type 5 outside the NSSA. In this scenario, however, the distinguishing issue is OSPF ABR default-route validation and the confirming observation is: End-to-end checks through the ABR succeed while its advertised default is valid and failover behavior is documented.

Question 127

During a metro aggregation incident, an HPE Juniper Networking engineer investigates this situation: A stub access area accepts the expected default from its ABR but applications still fail whenever that ABR loses upstream connectivity. Which routing or service mechanism best explains the reported behavior?

  1. AS-external advertisements have a different summarization control point from interarea type 3 summaries.
  2. A stub area excludes AS-external type 5 LSAs and relies on ABR-supplied reachability rather than importing individual external routes.
  3. Receiving an OSPF default route only indicates a routing advertisement; it does not guarantee a healthy upstream service path.
  4. A virtual link needs a valid nonstub transit area between ABRs; a stub area cannot serve as the transit.

Explanation

Correct Answer

C:

Receiving an OSPF default route only indicates a routing advertisement; it does not guarantee a healthy upstream service path. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: End-to-end checks through the ABR succeed while its advertised default is valid and failover behavior is documented. The targeted correction is: Tie default-origination behavior to the intended exit architecture and upstream monitoring where feasible.

Incorrect Answers

A:

AS-external advertisements have a different summarization control point from interarea type 3 summaries. This is a plausible protocol explanation for a different OSPF condition, specifically ASBR external aggregation. AS-external advertisements have a different summarization control point from interarea type 3 summaries. In this scenario, however, the distinguishing issue is OSPF ABR default-route validation and the confirming observation is: End-to-end checks through the ABR succeed while its advertised default is valid and failover behavior is documented.

B:

A stub area excludes AS-external type 5 LSAs and relies on ABR-supplied reachability rather than importing individual external routes. This is a plausible protocol explanation for a different OSPF condition, specifically Stub-area external reachability. A stub area excludes AS-external type 5 LSAs and relies on ABR-supplied reachability rather than importing individual external routes. In this scenario, however, the distinguishing issue is OSPF ABR default-route validation and the confirming observation is: End-to-end checks through the ABR succeed while its advertised default is valid and failover behavior is documented.

D:

A virtual link needs a valid nonstub transit area between ABRs; a stub area cannot serve as the transit. This is a plausible protocol explanation for a different OSPF condition, specifically Virtual-link transit eligibility. A virtual link needs a valid nonstub transit area between ABRs; a stub area cannot serve as the transit. In this scenario, however, the distinguishing issue is OSPF ABR default-route validation and the confirming observation is: End-to-end checks through the ABR succeed while its advertised default is valid and failover behavior is documented.

Question 128

During a managed service audit, an HPE Juniper Networking engineer investigates this situation: A stub access area accepts the expected default from its ABR but applications still fail whenever that ABR loses upstream connectivity. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?

  1. External summary behavior and routing-policy evidence show the intended external aggregate without an unrelated area-range effect.
  2. The local LSDB lacks type 5 LSAs while an ABR-provided default can still be installed.
  3. The virtual-link adjacency establishes through an eligible common transit area and backbone routes synchronize.
  4. End-to-end checks through the ABR succeed while its advertised default is valid and failover behavior is documented.

Explanation

Correct Answer

D:

End-to-end checks through the ABR succeed while its advertised default is valid and failover behavior is documented. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: Receiving an OSPF default route only indicates a routing advertisement; it does not guarantee a healthy upstream service path.

Incorrect Answers

A:

External summary behavior and routing-policy evidence show the intended external aggregate without an unrelated area-range effect. This is a plausible observed evidence for a different OSPF condition, specifically ASBR external aggregation. AS-external advertisements have a different summarization control point from interarea type 3 summaries. In this scenario, however, the distinguishing issue is OSPF ABR default-route validation and the confirming observation is: End-to-end checks through the ABR succeed while its advertised default is valid and failover behavior is documented.

B:

The local LSDB lacks type 5 LSAs while an ABR-provided default can still be installed. This is a plausible observed evidence for a different OSPF condition, specifically Stub-area external reachability. A stub area excludes AS-external type 5 LSAs and relies on ABR-supplied reachability rather than importing individual external routes. In this scenario, however, the distinguishing issue is OSPF ABR default-route validation and the confirming observation is: End-to-end checks through the ABR succeed while its advertised default is valid and failover behavior is documented.

C:

The virtual-link adjacency establishes through an eligible common transit area and backbone routes synchronize. This is a plausible observed evidence for a different OSPF condition, specifically Virtual-link transit eligibility. A virtual link needs a valid nonstub transit area between ABRs; a stub area cannot serve as the transit. In this scenario, however, the distinguishing issue is OSPF ABR default-route validation and the confirming observation is: End-to-end checks through the ABR succeed while its advertised default is valid and failover behavior is documented.

Question 129

During a network architecture troubleshooting workshop, an HPE Juniper Networking engineer investigates this situation: A stub access area accepts the expected default from its ABR but applications still fail whenever that ABR loses upstream connectivity. Which response or focused corrective action best addresses this situation without changing unrelated components?

  1. Tie default-origination behavior to the intended exit architecture and upstream monitoring where feasible.
  2. Apply ASBR-appropriate external aggregation or controlled redistribution for the external prefix set.
  3. Use a normal area if individual external LSAs are required, or explicitly design default-route reachability through the ABR.
  4. Use the appropriate totally-stubby no-summaries behavior consistently at the ABR while retaining a valid default.

Explanation

Correct Answer

A:

Tie default-origination behavior to the intended exit architecture and upstream monitoring where feasible. The change addresses the root behavior described here: Receiving an OSPF default route only indicates a routing advertisement; it does not guarantee a healthy upstream service path. Verify success with: End-to-end checks through the ABR succeed while its advertised default is valid and failover behavior is documented.

Incorrect Answers

B:

Apply ASBR-appropriate external aggregation or controlled redistribution for the external prefix set. This is a plausible configuration or operational fix for a different OSPF condition, specifically ASBR external aggregation. AS-external advertisements have a different summarization control point from interarea type 3 summaries. In this scenario, however, the distinguishing issue is OSPF ABR default-route validation and the confirming observation is: End-to-end checks through the ABR succeed while its advertised default is valid and failover behavior is documented.

C:

Use a normal area if individual external LSAs are required, or explicitly design default-route reachability through the ABR. This is a plausible configuration or operational fix for a different OSPF condition, specifically Stub-area external reachability. A stub area excludes AS-external type 5 LSAs and relies on ABR-supplied reachability rather than importing individual external routes. In this scenario, however, the distinguishing issue is OSPF ABR default-route validation and the confirming observation is: End-to-end checks through the ABR succeed while its advertised default is valid and failover behavior is documented.

D:

Use the appropriate totally-stubby no-summaries behavior consistently at the ABR while retaining a valid default. This is a plausible configuration or operational fix for a different OSPF condition, specifically Totally stubby interarea suppression. A normal stub excludes type 5 externals but still allows type 3 interarea summaries, whereas a totally stubby design suppresses nondefault type 3s. In this scenario, however, the distinguishing issue is OSPF ABR default-route validation and the confirming observation is: End-to-end checks through the ABR succeed while its advertised default is valid and failover behavior is documented.

Question 130

During an inter-POP failover test, an HPE Juniper Networking engineer investigates this situation: A stub access area accepts the expected default from its ABR but applications still fail whenever that ABR loses upstream connectivity. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Maintain an external-prefix inventory and validate reachable components before suppressing specifics.
  2. Test loss of upstream connectivity separately from loss of the local OSPF adjacency.
  3. Record permitted LSA types and verify the default route before converting an area to stub.
  4. Test both the NSSA LSDB and remote external route installation after a redistribution change.

Explanation

Correct Answer

B:

Test loss of upstream connectivity separately from loss of the local OSPF adjacency. The control limits repetition of the described root condition: Receiving an OSPF default route only indicates a routing advertisement; it does not guarantee a healthy upstream service path. During audits, confirm: End-to-end checks through the ABR succeed while its advertised default is valid and failover behavior is documented.

Incorrect Answers

A:

Maintain an external-prefix inventory and validate reachable components before suppressing specifics. This is a plausible preventive practice for a different OSPF condition, specifically ASBR external aggregation. AS-external advertisements have a different summarization control point from interarea type 3 summaries. In this scenario, however, the distinguishing issue is OSPF ABR default-route validation and the confirming observation is: End-to-end checks through the ABR succeed while its advertised default is valid and failover behavior is documented.

C:

Record permitted LSA types and verify the default route before converting an area to stub. This is a plausible preventive practice for a different OSPF condition, specifically Stub-area external reachability. A stub area excludes AS-external type 5 LSAs and relies on ABR-supplied reachability rather than importing individual external routes. In this scenario, however, the distinguishing issue is OSPF ABR default-route validation and the confirming observation is: End-to-end checks through the ABR succeed while its advertised default is valid and failover behavior is documented.

D:

Test both the NSSA LSDB and remote external route installation after a redistribution change. This is a plausible preventive practice for a different OSPF condition, specifically NSSA external redistribution. An NSSA can carry locally redistributed externals as type 7 LSAs, which an eligible ABR translates to type 5 outside the NSSA. In this scenario, however, the distinguishing issue is OSPF ABR default-route validation and the confirming observation is: End-to-end checks through the ABR succeed while its advertised default is valid and failover behavior is documented.


Service Provider Routing and Switching, Professional (JNCIP-SP) (JN0-664) Practice Tests

Purchase Individually

JN0-664 Premium File

Premium File
JN0-664 Premium File
96 Q&A
$76.99$69.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.