Pass Your Juniper JN0-664 Exam Easy!

Juniper JN0-664 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

JN0-664 Premium VCE File

Juniper JN0-664 Premium File

96 Questions & Answers

Last Update: Oct 12, 2026

$69.99

JN0-664 Bundle gives you unlimited access to "JN0-664" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
JN0-664 Premium VCE File
Juniper JN0-664 Premium File

96 Questions & Answers

Last Update: Oct 12, 2026

$69.99

Juniper JN0-664 Exam Bundle gives you unlimited access to "JN0-664" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

Juniper JN0-664 Practice Test 10

Question 90

During a customer service restoration, an HPE Juniper Networking engineer investigates this situation: A provider path is unexpectedly asymmetric after one side of an OSPF transit pair changes its interface cost. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Document virtual links as a temporary remediation with a planned backbone simplification.
  2. Model forward and return paths after interface-cost maintenance.
  3. Require a backbone-continuity diagram and test reachability between nonbackbone areas during changes.
  4. Document OSPF network types for dedicated versus shared Ethernet circuits.

Explanation

Correct Answer

B:

Model forward and return paths after interface-cost maintenance. The control limits repetition of the described root condition: OSPF SPF uses each router's outbound link metrics, so directional cost differences can yield asymmetric paths. During audits, confirm: The calculated shortest paths match measured next hops after directional costs are accounted for.

Incorrect Answers

A:

Document virtual links as a temporary remediation with a planned backbone simplification. This is a plausible preventive practice for a different OSPF condition, specifically Virtual-link transit eligibility. A virtual link needs a valid nonstub transit area between ABRs; a stub area cannot serve as the transit. In this scenario, however, the distinguishing issue is SPF metric asymmetry and the confirming observation is: The calculated shortest paths match measured next hops after directional costs are accounted for.

C:

Require a backbone-continuity diagram and test reachability between nonbackbone areas during changes. This is a plausible preventive practice for a different OSPF condition, specifically Backbone continuity through ABR. OSPF interarea routing normally depends on a continuous area 0 backbone reached through ABRs. In this scenario, however, the distinguishing issue is SPF metric asymmetry and the confirming observation is: The calculated shortest paths match measured next hops after directional costs are accounted for.

D:

Document OSPF network types for dedicated versus shared Ethernet circuits. This is a plausible preventive practice for a different OSPF condition, specifically OSPF point-to-point on Ethernet. A point-to-point OSPF interface avoids broadcast DR/BDR election behavior when both sides use a consistent compatible type. In this scenario, however, the distinguishing issue is SPF metric asymmetry and the confirming observation is: The calculated shortest paths match measured next hops after directional costs are accounted for.

Question 91

During a Junos routing maintenance review, an HPE Juniper Networking engineer investigates this situation: Two valid same-cost OSPF routes exist toward a destination, but traffic uses one next hop because the configuration restricts installed ECMP paths. Which targeted check most directly distinguishes the likely cause before a configuration change?

  1. Inspect the ABR stub options and the type 3 summary LSAs accepted in this area.
  2. Compare directional interface costs and run shortest-path calculations from each router's own LSDB view.
  3. Inspect equal-cost route eligibility, the forwarding table and any multipath limit settings.
  4. Check the transit area's type and the endpoints' shared nonbackbone-area participation.

Explanation

Correct Answer

C:

Inspect equal-cost route eligibility, the forwarding table and any multipath limit settings. This check examines the decisive condition for OSPF equal-cost multipath before any unrelated changes are made. The underlying mechanism is: Equal-cost path computation and installing multiple usable forwarding next hops are distinct from merely having two neighbors. The confirming observation is: The forwarding entry contains the expected usable next hops after ECMP configuration is aligned.

Incorrect Answers

A:

Inspect the ABR stub options and the type 3 summary LSAs accepted in this area. This is a plausible diagnostic check for a different OSPF condition, specifically Totally stubby interarea suppression. A normal stub excludes type 5 externals but still allows type 3 interarea summaries, whereas a totally stubby design suppresses nondefault type 3s. In this scenario, however, the distinguishing issue is OSPF equal-cost multipath and the confirming observation is: The forwarding entry contains the expected usable next hops after ECMP configuration is aligned.

B:

Compare directional interface costs and run shortest-path calculations from each router's own LSDB view. This is a plausible diagnostic check for a different OSPF condition, specifically SPF metric asymmetry. OSPF SPF uses each router's outbound link metrics, so directional cost differences can yield asymmetric paths. In this scenario, however, the distinguishing issue is OSPF equal-cost multipath and the confirming observation is: The forwarding entry contains the expected usable next hops after ECMP configuration is aligned.

D:

Check the transit area's type and the endpoints' shared nonbackbone-area participation. This is a plausible diagnostic check for a different OSPF condition, specifically Virtual-link transit eligibility. A virtual link needs a valid nonstub transit area between ABRs; a stub area cannot serve as the transit. In this scenario, however, the distinguishing issue is OSPF equal-cost multipath and the confirming observation is: The forwarding entry contains the expected usable next hops after ECMP configuration is aligned.

Question 92

During a multisite network cutover, an HPE Juniper Networking engineer investigates this situation: Two valid same-cost OSPF routes exist toward a destination, but traffic uses one next hop because the configuration restricts installed ECMP paths. Which routing or service mechanism best explains the reported behavior?

  1. A normal stub excludes type 5 externals but still allows type 3 interarea summaries, whereas a totally stubby design suppresses nondefault type 3s.
  2. OSPF SPF uses each router's outbound link metrics, so directional cost differences can yield asymmetric paths.
  3. OSPF interarea routing normally depends on a continuous area 0 backbone reached through ABRs.
  4. Equal-cost path computation and installing multiple usable forwarding next hops are distinct from merely having two neighbors.

Explanation

Correct Answer

D:

Equal-cost path computation and installing multiple usable forwarding next hops are distinct from merely having two neighbors. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: The forwarding entry contains the expected usable next hops after ECMP configuration is aligned. The targeted correction is: Enable supported multipath handling and verify consistent next-hop resolution before load-sharing.

Incorrect Answers

A:

A normal stub excludes type 5 externals but still allows type 3 interarea summaries, whereas a totally stubby design suppresses nondefault type 3s. This is a plausible protocol explanation for a different OSPF condition, specifically Totally stubby interarea suppression. A normal stub excludes type 5 externals but still allows type 3 interarea summaries, whereas a totally stubby design suppresses nondefault type 3s. In this scenario, however, the distinguishing issue is OSPF equal-cost multipath and the confirming observation is: The forwarding entry contains the expected usable next hops after ECMP configuration is aligned.

B:

OSPF SPF uses each router's outbound link metrics, so directional cost differences can yield asymmetric paths. This is a plausible protocol explanation for a different OSPF condition, specifically SPF metric asymmetry. OSPF SPF uses each router's outbound link metrics, so directional cost differences can yield asymmetric paths. In this scenario, however, the distinguishing issue is OSPF equal-cost multipath and the confirming observation is: The forwarding entry contains the expected usable next hops after ECMP configuration is aligned.

C:

OSPF interarea routing normally depends on a continuous area 0 backbone reached through ABRs. This is a plausible protocol explanation for a different OSPF condition, specifically Backbone continuity through ABR. OSPF interarea routing normally depends on a continuous area 0 backbone reached through ABRs. In this scenario, however, the distinguishing issue is OSPF equal-cost multipath and the confirming observation is: The forwarding entry contains the expected usable next hops after ECMP configuration is aligned.

Question 93

During a metro aggregation incident, an HPE Juniper Networking engineer investigates this situation: Two valid same-cost OSPF routes exist toward a destination, but traffic uses one next hop because the configuration restricts installed ECMP paths. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?

  1. The forwarding entry contains the expected usable next hops after ECMP configuration is aligned.
  2. The area retains a default summary and no longer carries the unwanted individual interarea summaries.
  3. The calculated shortest paths match measured next hops after directional costs are accounted for.
  4. Neighbor LSDB inspection shows LSAs still flood even if local route installation differs.

Explanation

Correct Answer

A:

The forwarding entry contains the expected usable next hops after ECMP configuration is aligned. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: Equal-cost path computation and installing multiple usable forwarding next hops are distinct from merely having two neighbors.

Incorrect Answers

B:

The area retains a default summary and no longer carries the unwanted individual interarea summaries. This is a plausible observed evidence for a different OSPF condition, specifically Totally stubby interarea suppression. A normal stub excludes type 5 externals but still allows type 3 interarea summaries, whereas a totally stubby design suppresses nondefault type 3s. In this scenario, however, the distinguishing issue is OSPF equal-cost multipath and the confirming observation is: The forwarding entry contains the expected usable next hops after ECMP configuration is aligned.

C:

The calculated shortest paths match measured next hops after directional costs are accounted for. This is a plausible observed evidence for a different OSPF condition, specifically SPF metric asymmetry. OSPF SPF uses each router's outbound link metrics, so directional cost differences can yield asymmetric paths. In this scenario, however, the distinguishing issue is OSPF equal-cost multipath and the confirming observation is: The forwarding entry contains the expected usable next hops after ECMP configuration is aligned.

D:

Neighbor LSDB inspection shows LSAs still flood even if local route installation differs. This is a plausible observed evidence for a different OSPF condition, specifically Inbound OSPF route filtering scope. A local routing-table import decision is not necessarily an LSA flooding filter in a link-state area. In this scenario, however, the distinguishing issue is OSPF equal-cost multipath and the confirming observation is: The forwarding entry contains the expected usable next hops after ECMP configuration is aligned.

Question 94

During a managed service audit, an HPE Juniper Networking engineer investigates this situation: Two valid same-cost OSPF routes exist toward a destination, but traffic uses one next hop because the configuration restricts installed ECMP paths. Which response or focused corrective action best addresses this situation without changing unrelated components?

  1. Use the appropriate totally-stubby no-summaries behavior consistently at the ABR while retaining a valid default.
  2. Enable supported multipath handling and verify consistent next-hop resolution before load-sharing.
  3. Normalize planned costs or explicitly accept asymmetry based on tested service requirements.
  4. Add a narrow export policy for the correct source protocol and approved prefix.

Explanation

Correct Answer

B:

Enable supported multipath handling and verify consistent next-hop resolution before load-sharing. The change addresses the root behavior described here: Equal-cost path computation and installing multiple usable forwarding next hops are distinct from merely having two neighbors. Verify success with: The forwarding entry contains the expected usable next hops after ECMP configuration is aligned.

Incorrect Answers

A:

Use the appropriate totally-stubby no-summaries behavior consistently at the ABR while retaining a valid default. This is a plausible configuration or operational fix for a different OSPF condition, specifically Totally stubby interarea suppression. A normal stub excludes type 5 externals but still allows type 3 interarea summaries, whereas a totally stubby design suppresses nondefault type 3s. In this scenario, however, the distinguishing issue is OSPF equal-cost multipath and the confirming observation is: The forwarding entry contains the expected usable next hops after ECMP configuration is aligned.

C:

Normalize planned costs or explicitly accept asymmetry based on tested service requirements. This is a plausible configuration or operational fix for a different OSPF condition, specifically SPF metric asymmetry. OSPF SPF uses each router's outbound link metrics, so directional cost differences can yield asymmetric paths. In this scenario, however, the distinguishing issue is OSPF equal-cost multipath and the confirming observation is: The forwarding entry contains the expected usable next hops after ECMP configuration is aligned.

D:

Add a narrow export policy for the correct source protocol and approved prefix. This is a plausible configuration or operational fix for a different OSPF condition, specifically OSPF route export policy missing. Junos OSPF does not automatically redistribute arbitrary static prefixes; an export policy must explicitly permit the route. In this scenario, however, the distinguishing issue is OSPF equal-cost multipath and the confirming observation is: The forwarding entry contains the expected usable next hops after ECMP configuration is aligned.

Question 95

During a network architecture troubleshooting workshop, an HPE Juniper Networking engineer investigates this situation: Two valid same-cost OSPF routes exist toward a destination, but traffic uses one next hop because the configuration restricts installed ECMP paths. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Check ABR summarization settings against the site's failover and reachability requirements.
  2. Model forward and return paths after interface-cost maintenance.
  3. Test failure behavior for each ECMP member rather than assuming hashing guarantees perfect per-flow balance.
  4. Audit passive-interface exceptions to prevent unintended neighbor formation.

Explanation

Correct Answer

C:

Test failure behavior for each ECMP member rather than assuming hashing guarantees perfect per-flow balance. The control limits repetition of the described root condition: Equal-cost path computation and installing multiple usable forwarding next hops are distinct from merely having two neighbors. During audits, confirm: The forwarding entry contains the expected usable next hops after ECMP configuration is aligned.

Incorrect Answers

A:

Check ABR summarization settings against the site's failover and reachability requirements. This is a plausible preventive practice for a different OSPF condition, specifically Totally stubby interarea suppression. A normal stub excludes type 5 externals but still allows type 3 interarea summaries, whereas a totally stubby design suppresses nondefault type 3s. In this scenario, however, the distinguishing issue is OSPF equal-cost multipath and the confirming observation is: The forwarding entry contains the expected usable next hops after ECMP configuration is aligned.

B:

Model forward and return paths after interface-cost maintenance. This is a plausible preventive practice for a different OSPF condition, specifically SPF metric asymmetry. OSPF SPF uses each router's outbound link metrics, so directional cost differences can yield asymmetric paths. In this scenario, however, the distinguishing issue is OSPF equal-cost multipath and the confirming observation is: The forwarding entry contains the expected usable next hops after ECMP configuration is aligned.

D:

Audit passive-interface exceptions to prevent unintended neighbor formation. This is a plausible preventive practice for a different OSPF condition, specifically Passive interface on OSPF LAN. A passive interface can contribute reachability without initiating routing adjacencies on a nontransit segment. In this scenario, however, the distinguishing issue is OSPF equal-cost multipath and the confirming observation is: The forwarding entry contains the expected usable next hops after ECMP configuration is aligned.

Question 96

During a service-provider escalation, an HPE Juniper Networking engineer investigates this situation: A dedicated Ethernet pair experiences unnecessary DR-related behavior even though there are only two routers and no shared third-party devices. Which targeted check most directly distinguishes the likely cause before a configuration change?

  1. Compare the area's stub configuration and its LSA types with the missing external destinations.
  2. Compare the received Hello and dead intervals on both ends of the same segment.
  3. Inspect external route types and compare the internal cost to each advertising ASBR.
  4. Inspect both peers' OSPF interface network type and resulting designated-router state.

Explanation

Correct Answer

D:

Inspect both peers' OSPF interface network type and resulting designated-router state. This check examines the decisive condition for OSPF point-to-point on Ethernet before any unrelated changes are made. The underlying mechanism is: A point-to-point OSPF interface avoids broadcast DR/BDR election behavior when both sides use a consistent compatible type. The confirming observation is: The pair reaches Full without a broadcast-segment DR/BDR election under the point-to-point design.

Incorrect Answers

A:

Compare the area's stub configuration and its LSA types with the missing external destinations. This is a plausible diagnostic check for a different OSPF condition, specifically Stub-area external reachability. A stub area excludes AS-external type 5 LSAs and relies on ABR-supplied reachability rather than importing individual external routes. In this scenario, however, the distinguishing issue is OSPF point-to-point on Ethernet and the confirming observation is: The pair reaches Full without a broadcast-segment DR/BDR election under the point-to-point design.

B:

Compare the received Hello and dead intervals on both ends of the same segment. This is a plausible diagnostic check for a different OSPF condition, specifically Hello/dead timer mismatch. Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency. In this scenario, however, the distinguishing issue is OSPF point-to-point on Ethernet and the confirming observation is: The pair reaches Full without a broadcast-segment DR/BDR election under the point-to-point design.

C:

Inspect external route types and compare the internal cost to each advertising ASBR. This is a plausible diagnostic check for a different OSPF condition, specifically External E1 versus E2 selection. An external E2 metric primarily represents the advertised external cost, whereas E1 accounts for internal cost toward the ASBR plus external cost. In this scenario, however, the distinguishing issue is OSPF point-to-point on Ethernet and the confirming observation is: The pair reaches Full without a broadcast-segment DR/BDR election under the point-to-point design.

Question 97

During a new PE-router service turn-up, an HPE Juniper Networking engineer investigates this situation: A dedicated Ethernet pair experiences unnecessary DR-related behavior even though there are only two routers and no shared third-party devices. Which routing or service mechanism best explains the reported behavior?

  1. A point-to-point OSPF interface avoids broadcast DR/BDR election behavior when both sides use a consistent compatible type.
  2. A stub area excludes AS-external type 5 LSAs and relies on ABR-supplied reachability rather than importing individual external routes.
  3. Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency.
  4. An external E2 metric primarily represents the advertised external cost, whereas E1 accounts for internal cost toward the ASBR plus external cost.

Explanation

Correct Answer

A:

A point-to-point OSPF interface avoids broadcast DR/BDR election behavior when both sides use a consistent compatible type. This is the causal rule that fits the observed state, not just a correlated symptom. To distinguish it from other failures, look for: The pair reaches Full without a broadcast-segment DR/BDR election under the point-to-point design. The targeted correction is: Use point-to-point OSPF interface operation consistently on the dedicated link.

Incorrect Answers

B:

A stub area excludes AS-external type 5 LSAs and relies on ABR-supplied reachability rather than importing individual external routes. This is a plausible protocol explanation for a different OSPF condition, specifically Stub-area external reachability. A stub area excludes AS-external type 5 LSAs and relies on ABR-supplied reachability rather than importing individual external routes. In this scenario, however, the distinguishing issue is OSPF point-to-point on Ethernet and the confirming observation is: The pair reaches Full without a broadcast-segment DR/BDR election under the point-to-point design.

C:

Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency. This is a plausible protocol explanation for a different OSPF condition, specifically Hello/dead timer mismatch. Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency. In this scenario, however, the distinguishing issue is OSPF point-to-point on Ethernet and the confirming observation is: The pair reaches Full without a broadcast-segment DR/BDR election under the point-to-point design.

D:

An external E2 metric primarily represents the advertised external cost, whereas E1 accounts for internal cost toward the ASBR plus external cost. This is a plausible protocol explanation for a different OSPF condition, specifically External E1 versus E2 selection. An external E2 metric primarily represents the advertised external cost, whereas E1 accounts for internal cost toward the ASBR plus external cost. In this scenario, however, the distinguishing issue is OSPF point-to-point on Ethernet and the confirming observation is: The pair reaches Full without a broadcast-segment DR/BDR election under the point-to-point design.

Question 98

During a customer VPN change window, an HPE Juniper Networking engineer investigates this situation: A dedicated Ethernet pair experiences unnecessary DR-related behavior even though there are only two routers and no shared third-party devices. After the appropriate response, which observation would best confirm that the stated service condition is handled correctly?

  1. The local LSDB lacks type 5 LSAs while an ABR-provided default can still be installed.
  2. The pair reaches Full without a broadcast-segment DR/BDR election under the point-to-point design.
  3. The Hello parameter mismatch is absent and the neighbor remains stable across several dead intervals.
  4. The calculated path ranking changes as predicted when an E1 policy considers internal cost to each exit.

Explanation

Correct Answer

B:

The pair reaches Full without a broadcast-segment DR/BDR election under the point-to-point design. This observation directly tests the fault hypothesis rather than simply showing that a session or interface exists. The underlying reason is: A point-to-point OSPF interface avoids broadcast DR/BDR election behavior when both sides use a consistent compatible type.

Incorrect Answers

A:

The local LSDB lacks type 5 LSAs while an ABR-provided default can still be installed. This is a plausible observed evidence for a different OSPF condition, specifically Stub-area external reachability. A stub area excludes AS-external type 5 LSAs and relies on ABR-supplied reachability rather than importing individual external routes. In this scenario, however, the distinguishing issue is OSPF point-to-point on Ethernet and the confirming observation is: The pair reaches Full without a broadcast-segment DR/BDR election under the point-to-point design.

C:

The Hello parameter mismatch is absent and the neighbor remains stable across several dead intervals. This is a plausible observed evidence for a different OSPF condition, specifically Hello/dead timer mismatch. Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency. In this scenario, however, the distinguishing issue is OSPF point-to-point on Ethernet and the confirming observation is: The pair reaches Full without a broadcast-segment DR/BDR election under the point-to-point design.

D:

The calculated path ranking changes as predicted when an E1 policy considers internal cost to each exit. This is a plausible observed evidence for a different OSPF condition, specifically External E1 versus E2 selection. An external E2 metric primarily represents the advertised external cost, whereas E1 accounts for internal cost toward the ASBR plus external cost. In this scenario, however, the distinguishing issue is OSPF point-to-point on Ethernet and the confirming observation is: The pair reaches Full without a broadcast-segment DR/BDR election under the point-to-point design.

Question 99

During a core-routing migration rehearsal, an HPE Juniper Networking engineer investigates this situation: A dedicated Ethernet pair experiences unnecessary DR-related behavior even though there are only two routers and no shared third-party devices. Which response or focused corrective action best addresses this situation without changing unrelated components?

  1. Use a normal area if individual external LSAs are required, or explicitly design default-route reachability through the ABR.
  2. Align Hello and dead timer values on the adjacency while keeping the network's planned convergence budget.
  3. Use point-to-point OSPF interface operation consistently on the dedicated link.
  4. Use an E1 policy when internal path cost to an external exit must influence the selection.

Explanation

Correct Answer

C:

Use point-to-point OSPF interface operation consistently on the dedicated link. The change addresses the root behavior described here: A point-to-point OSPF interface avoids broadcast DR/BDR election behavior when both sides use a consistent compatible type. Verify success with: The pair reaches Full without a broadcast-segment DR/BDR election under the point-to-point design.

Incorrect Answers

A:

Use a normal area if individual external LSAs are required, or explicitly design default-route reachability through the ABR. This is a plausible configuration or operational fix for a different OSPF condition, specifically Stub-area external reachability. A stub area excludes AS-external type 5 LSAs and relies on ABR-supplied reachability rather than importing individual external routes. In this scenario, however, the distinguishing issue is OSPF point-to-point on Ethernet and the confirming observation is: The pair reaches Full without a broadcast-segment DR/BDR election under the point-to-point design.

B:

Align Hello and dead timer values on the adjacency while keeping the network's planned convergence budget. This is a plausible configuration or operational fix for a different OSPF condition, specifically Hello/dead timer mismatch. Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency. In this scenario, however, the distinguishing issue is OSPF point-to-point on Ethernet and the confirming observation is: The pair reaches Full without a broadcast-segment DR/BDR election under the point-to-point design.

D:

Use an E1 policy when internal path cost to an external exit must influence the selection. This is a plausible configuration or operational fix for a different OSPF condition, specifically External E1 versus E2 selection. An external E2 metric primarily represents the advertised external cost, whereas E1 accounts for internal cost toward the ASBR plus external cost. In this scenario, however, the distinguishing issue is OSPF point-to-point on Ethernet and the confirming observation is: The pair reaches Full without a broadcast-segment DR/BDR election under the point-to-point design.

Question 100

During a backbone POP acceptance review, an HPE Juniper Networking engineer investigates this situation: A dedicated Ethernet pair experiences unnecessary DR-related behavior even though there are only two routers and no shared third-party devices. Which operational control would best prevent a recurrence of this exact failure mode?

  1. Record permitted LSA types and verify the default route before converting an area to stub.
  2. Audit OSPF interface timers during template deployment and route maintenance.
  3. Test external metric-type assumptions after an ASBR topology or cost change.
  4. Document OSPF network types for dedicated versus shared Ethernet circuits.

Explanation

Correct Answer

D:

Document OSPF network types for dedicated versus shared Ethernet circuits. The control limits repetition of the described root condition: A point-to-point OSPF interface avoids broadcast DR/BDR election behavior when both sides use a consistent compatible type. During audits, confirm: The pair reaches Full without a broadcast-segment DR/BDR election under the point-to-point design.

Incorrect Answers

A:

Record permitted LSA types and verify the default route before converting an area to stub. This is a plausible preventive practice for a different OSPF condition, specifically Stub-area external reachability. A stub area excludes AS-external type 5 LSAs and relies on ABR-supplied reachability rather than importing individual external routes. In this scenario, however, the distinguishing issue is OSPF point-to-point on Ethernet and the confirming observation is: The pair reaches Full without a broadcast-segment DR/BDR election under the point-to-point design.

B:

Audit OSPF interface timers during template deployment and route maintenance. This is a plausible preventive practice for a different OSPF condition, specifically Hello/dead timer mismatch. Neighbors must agree on key OSPF Hello parameters, including timing intervals, to maintain adjacency. In this scenario, however, the distinguishing issue is OSPF point-to-point on Ethernet and the confirming observation is: The pair reaches Full without a broadcast-segment DR/BDR election under the point-to-point design.

C:

Test external metric-type assumptions after an ASBR topology or cost change. This is a plausible preventive practice for a different OSPF condition, specifically External E1 versus E2 selection. An external E2 metric primarily represents the advertised external cost, whereas E1 accounts for internal cost toward the ASBR plus external cost. In this scenario, however, the distinguishing issue is OSPF point-to-point on Ethernet and the confirming observation is: The pair reaches Full without a broadcast-segment DR/BDR election under the point-to-point design.


Service Provider Routing and Switching, Professional (JNCIP-SP) (JN0-664) Practice Tests

Purchase Individually

JN0-664 Premium File

Premium File
JN0-664 Premium File
96 Q&A
$76.99$69.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.