Pass Your Fortinet NSE5_SSE_AD-7.6 Exam Easy!

Fortinet NSE5_SSE_AD-7.6 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

NSE5_SSE_AD-7.6 Premium VCE File

Fortinet NSE5_SSE_AD-7.6 Premium File

54 Questions & Answers

Last Update: Nov 08, 2026

$69.99

NSE5_SSE_AD-7.6 Bundle gives you unlimited access to "NSE5_SSE_AD-7.6" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
NSE5_SSE_AD-7.6 Premium VCE File
Fortinet NSE5_SSE_AD-7.6 Premium File

54 Questions & Answers

Last Update: Nov 08, 2026

$69.99

Fortinet NSE5_SSE_AD-7.6 Exam Bundle gives you unlimited access to "NSE5_SSE_AD-7.6" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

Fortinet NSE5_SSE_AD-7.6 Practice Test 5

Question 40

For this Fortinet incident, which observation should the engineer collect first to validate the suspected condition? A branch upgraded an ISP, yet the SLA interface health view still shows old packet-loss and jitter statistics from before the maintenance.

  1. Inspect whether the monitored service has sufficient real sessions to supply passive samples
  2. Examine loss percentages over probe intervals and compare with the accepted threshold
  3. Compare measured jitter for each member with the voice SLA target rather than only checking packet loss
  4. Inspect most recent probe measurements and sample timing on the affected member

Explanation

Correct Answer

D:

Inspect most recent probe measurements and sample timing on the affected member. This check isolates the relevant control before the change. Health dashboards display measured probe results, not a static certification that a line has been repaired.

Incorrect Answers

A:

Inspect whether the monitored service has sufficient real sessions to supply passive samples. It could be appropriate when a metered branch wants link-quality measurements without creating additional periodic probe traffic during normal use. However, that does not resolve the stated condition: a branch upgraded an ISP, yet the SLA interface health view still shows old packet-loss and jitter statistics from before the maintenance. A more direct answer is inspect most recent probe measurements and sample timing on the affected member.

B:

Examine loss percentages over probe intervals and compare with the accepted threshold. It addresses a remote kiosk experiences intermittent missing packets despite its interface staying up. In the reported environment, the missing behavior instead relates to a branch upgraded an ISP, yet the SLA interface health view still shows old packet-loss and jitter statistics from before the maintenance. The relevant choice is inspect most recent probe measurements and sample timing on the affected member.

C:

Compare measured jitter for each member with the voice SLA target rather than only checking packet loss. That is a useful action for a different circumstance: a voice application performs poorly with high jitter even though packet loss is low on both WANs. The present case is constrained by a branch upgraded an ISP, yet the SLA interface health view still shows old packet-loss and jitter statistics from before the maintenance; the targeted response is inspect most recent probe measurements and sample timing on the affected member.

Question 41

During implementation, the administrator observes: A company uses FortiManager for its FortiGate hub configurations and wants to prevent the SASE overlay settings from drifting across multiple sites. Which intervention targets the described fault rather than an adjacent workflow?

  1. Validate hub-specific route advertisement, preference and available SPA connectivity for both hubs
  2. Manage and verify the supported SD-WAN hub configuration objects through FortiManager with controlled deployment
  3. Use FortiSASE SPA PoP-to-FortiGate hub IPsec connectivity with specific private routing and access policies
  4. Keep secure Internet access and secure private access forwarding choices distinct in the policy and route design

Explanation

Correct Answer

B:

Manage and verify the supported SD-WAN hub configuration objects through FortiManager with controlled deployment. Centralized orchestration can standardize supported configuration across FortiGate hubs while preserving site-specific data. The acceptance check should show: Each approved hub has consistent overlay and routing settings after verified deployment.

Incorrect Answers

A:

Validate hub-specific route advertisement, preference and available SPA connectivity for both hubs. The outcome for that step belongs to an organization adds a second FortiGate hub for resilience but has not defined which private prefixes each hub advertises. Here the decisive requirement concerns a company uses FortiManager for its FortiGate hub configurations and wants to prevent the SASE overlay settings from drifting across multiple sites, so manage and verify the supported SD-WAN hub configuration objects through FortiManager with controlled deployment is the better fit.

C:

Use FortiSASE SPA PoP-to-FortiGate hub IPsec connectivity with specific private routing and access policies. That is a useful action for a different circumstance: a secure private access rollout uses a hub-and-spoke VPN topology and engineers expect private traffic to be accessible without exposing on-prem applications to the public Internet. The present case is constrained by a company uses FortiManager for its FortiGate hub configurations and wants to prevent the SASE overlay settings from drifting across multiple sites; the targeted response is manage and verify the supported SD-WAN hub configuration objects through FortiManager with controlled deployment.

D:

Keep secure Internet access and secure private access forwarding choices distinct in the policy and route design. It could be appropriate when fortiSASE remote clients reach SASE points of presence, yet office users need direct access to the Internet without unnecessarily hairpinning via a corporate hub. However, that does not resolve the stated condition: a company uses FortiManager for its FortiGate hub configurations and wants to prevent the SASE overlay settings from drifting across multiple sites. A more direct answer is manage and verify the supported SD-WAN hub configuration objects through FortiManager with controlled deployment.

Question 42

An acceptance test is needed after the change. Which measured outcome best confirms the described Fortinet issue has been resolved? A security team needs to determine whether a remote user's web traffic actually traverses a FortiSASE enforcement point rather than exiting locally.

  1. The user's test flow appears in FortiSASE policy and traffic logs for the expected PoP
  2. After an approved region or steering correction, affected users reach an appropriate PoP with improved path latency
  3. The audit record identifies the account and event corresponding to the deployed change
  4. A supported changed object appears in the FortiSASE tenant after successful synchronization

Explanation

Correct Answer

A:

The user's test flow appears in FortiSASE policy and traffic logs for the expected PoP. It demonstrates that the intended path or control is actually working, not merely configured.

Incorrect Answers

B:

After an approved region or steering correction, affected users reach an appropriate PoP with improved path latency. It addresses the SASE team receives reports that remote users in one region have unusually long service round trips despite healthy home broadband. In the reported environment, the missing behavior instead relates to a security team needs to determine whether a remote user's web traffic actually traverses a FortiSASE enforcement point rather than exiting locally. The relevant choice is the user's test flow appears in FortiSASE policy and traffic logs for the expected PoP.

C:

The audit record identifies the account and event corresponding to the deployed change. The outcome for that step belongs to an internal audit asks whether a just-deployed SASE policy was changed by an authorized operator during a specific window. Here the decisive requirement concerns a security team needs to determine whether a remote user's web traffic actually traverses a FortiSASE enforcement point rather than exiting locally, so the user's test flow appears in FortiSASE policy and traffic logs for the expected PoP is the better fit.

D:

A supported changed object appears in the FortiSASE tenant after successful synchronization. That is a useful action for a different circumstance: fortiSASE configuration is being centrally managed, but changes made in FortiManager do not appear in the remote tenant. The present case is constrained by a security team needs to determine whether a remote user's web traffic actually traverses a FortiSASE enforcement point rather than exiting locally; the targeted response is the user's test flow appears in FortiSASE policy and traffic logs for the expected PoP.

Question 43

At a FortiSASE/SD-WAN site, this issue is reported: A FortiSASE inspection policy protects web downloads but remote staff use encrypted traffic exempted from all deep inspection rules. What is the most direct technical change to address the stated requirement?

  1. Attach an appropriate web-filter category policy to the matching FortiSASE security profile group
  2. Review the exemption and narrow it to justified destinations before relying on content-based protection
  3. Use the supported inline-CASB application controls to target the specific file-transfer activity
  4. Apply an appropriately scoped IPS profile to the authorized traffic and review the resulting threat events

Explanation

Correct Answer

B:

Review the exemption and narrow it to justified destinations before relying on content-based protection. Content inspection of encrypted sessions requires decryptability, except where inspection capabilities specifically work without it. The acceptance check should show: Relevant test HTTPS downloads receive the intended malware or DLP inspection.

Incorrect Answers

A:

Attach an appropriate web-filter category policy to the matching FortiSASE security profile group. The outcome for that step belongs to employees visit known phishing categories, and the security lead wants to block those categories without relying on destination IP addresses alone. Here the decisive requirement concerns a FortiSASE inspection policy protects web downloads but remote staff use encrypted traffic exempted from all deep inspection rules, so review the exemption and narrow it to justified destinations before relying on content-based protection is the better fit.

C:

Use the supported inline-CASB application controls to target the specific file-transfer activity. That is a useful action for a different circumstance: a sanctioned collaboration app is allowed, but management wants to prevent an unapproved file transfer action within that SaaS application. The present case is constrained by a FortiSASE inspection policy protects web downloads but remote staff use encrypted traffic exempted from all deep inspection rules; the targeted response is review the exemption and narrow it to justified destinations before relying on content-based protection.

D:

Apply an appropriately scoped IPS profile to the authorized traffic and review the resulting threat events. It could be appropriate when a security operations team wants to detect exploit-pattern traffic directed at vulnerable services reached through FortiSASE. However, that does not resolve the stated condition: a FortiSASE inspection policy protects web downloads but remote staff use encrypted traffic exempted from all deep inspection rules. A more direct answer is review the exemption and narrow it to justified destinations before relying on content-based protection.

Question 44

Before changing the configuration, the team needs to isolate the problem. Which diagnostic check is most targeted here? Incident: An engineer added an SD-WAN steering rule but expected it to override a missing default route for general Internet traffic.

  1. Check the route table for 0.0.0.0/0 and the selected member's gateway
  2. Inspect the route lookup for a specific protected subnet and its policy match
  3. Inspect IPsec state, BGP neighbor status and advertised/received prefixes
  4. Run route lookup and firewall-policy matching against the new application address

Explanation

Correct Answer

A:

Check the route table for 0.0.0.0/0 and the selected member's gateway. The observed evidence guides the targeted repair: Provide an Internet default route that resolves through the SD-WAN design before testing policy steering.

Incorrect Answers

B:

Inspect the route lookup for a specific protected subnet and its policy match. That is a useful action for a different circumstance: following a tunnel migration, the interface is healthy but users cannot reach private subnets behind the SD-WAN hub. The present case is constrained by an engineer added an SD-WAN steering rule but expected it to override a missing default route for general Internet traffic; the targeted response is check the route table for 0.0.0.0/0 and the selected member's gateway.

C:

Inspect IPsec state, BGP neighbor status and advertised/received prefixes. It addresses remote users can reach an SASE security PoP, but the FortiGate SD-WAN hub never learns the private prefix it should send toward that PoP. In the reported environment, the missing behavior instead relates to an engineer added an SD-WAN steering rule but expected it to override a missing default route for general Internet traffic. The relevant choice is check the route table for 0.0.0.0/0 and the selected member's gateway.

D:

Run route lookup and firewall-policy matching against the new application address. The outcome for that step belongs to an existing site-to-site IPsec tunnel remains up but a private application is unreachable after an address change. Here the decisive requirement concerns an engineer added an SD-WAN steering rule but expected it to override a missing default route for general Internet traffic, so check the route table for 0.0.0.0/0 and the selected member's gateway is the better fit.

Question 45

The team is troubleshooting the following Fortinet 7.6 deployment: Two WANs both meet the application SLA, but the accounting team requires the cheapest acceptable link for everyday SaaS access. Which specific corrective action should be prioritized?

  1. Configure Lowest Cost (SLA) steering with real member costs and the SaaS SLA target
  2. Correct the SD-WAN rule's source criteria to the actual migrated subnet
  3. Move or refine the billing rule so the specific matching policy is considered before the broad catchall
  4. Narrow the broad rule's match conditions or change rule order so the SaaS exception can match

Explanation

Correct Answer

A:

Configure Lowest Cost (SLA) steering with real member costs and the SaaS SLA target. The policy uses member cost to choose among links that meet the required performance thresholds. The configuration alone must be followed by a functioning test: The selected path is the cheapest SLA-compliant member under the current measurements.

Incorrect Answers

B:

Correct the SD-WAN rule's source criteria to the actual migrated subnet. The outcome for that step belongs to fortiGate's traffic policy permits VoIP, but its SD-WAN rule is scoped to the wrong source network after a subnet migration. Here the decisive requirement concerns two WANs both meet the application SLA, but the accounting team requires the cheapest acceptable link for everyday SaaS access, so configure Lowest Cost (SLA) steering with real member costs and the SaaS SLA target is the better fit.

C:

Move or refine the billing rule so the specific matching policy is considered before the broad catchall. It addresses a configuration has one generic catchall rule and one narrowly matched billing rule; billing traffic uses the wrong member. In the reported environment, the missing behavior instead relates to two WANs both meet the application SLA, but the accounting team requires the cheapest acceptable link for everyday SaaS access. The relevant choice is configure Lowest Cost (SLA) steering with real member costs and the SaaS SLA target.

D:

Narrow the broad rule's match conditions or change rule order so the SaaS exception can match. That is a useful action for a different circumstance: a single high-priority SD-WAN rule is matching every WAN flow, preventing a later SaaS-specific rule from being used. The present case is constrained by two WANs both meet the application SLA, but the accounting team requires the cheapest acceptable link for everyday SaaS access; the targeted response is configure Lowest Cost (SLA) steering with real member costs and the SaaS SLA target.

Question 46

Before changing the configuration, the team needs to isolate the problem. Which diagnostic check is most targeted here? Incident: A private application behind the hub is routed correctly, but the security gateway denies the remote SASE user's source subnet.

  1. Inspect the connector's configured peer and IKE negotiation destination during connection attempts
  2. Inspect IPsec peers, route exchange and policies for the particular private service
  3. Inspect BGP neighbor state and the expected route in the routing table
  4. Inspect the denied session's source/destination and matching FortiGate policy ID

Explanation

Correct Answer

D:

Inspect the denied session's source/destination and matching FortiGate policy ID. This check isolates the relevant control before the change. Private access requires separate firewall authorization in addition to tunnel and route reachability.

Incorrect Answers

A:

Inspect the connector's configured peer and IKE negotiation destination during connection attempts. That is a useful action for a different circumstance: after a hub IP address changes, the FortiSASE connector still tries to establish an IPsec tunnel toward the old peer. The present case is constrained by a private application behind the hub is routed correctly, but the security gateway denies the remote SASE user's source subnet; the targeted response is inspect the denied session's source/destination and matching FortiGate policy ID.

B:

Inspect IPsec peers, route exchange and policies for the particular private service. It addresses a secure private access rollout uses a hub-and-spoke VPN topology and engineers expect private traffic to be accessible without exposing on-prem applications to the public Internet. In the reported environment, the missing behavior instead relates to a private application behind the hub is routed correctly, but the security gateway denies the remote SASE user's source subnet. The relevant choice is inspect the denied session's source/destination and matching FortiGate policy ID.

C:

Inspect BGP neighbor state and the expected route in the routing table. It could be appropriate when a service provider reuses a FortiGate SD-WAN hub for FortiSASE SPA and wants to confirm BGP is functioning, not only an IPsec phase-one tunnel. However, that does not resolve the stated condition: a private application behind the hub is routed correctly, but the security gateway denies the remote SASE user's source subnet. A more direct answer is inspect the denied session's source/destination and matching FortiGate policy ID.

Question 47

The team has applied the proposed fix. Which user-visible or logged result is the strongest validation for this case? A managed endpoint runs antivirus, yet it has stopped sending required endpoint telemetry to the FortiSASE management service.

  1. The pilot group enforces the new control without changing the nonpilot cohort's access
  2. A patched test endpoint receives the compliant tag while a deliberately vulnerable test endpoint receives the intended restriction
  3. Access follows the intended policy only after the agent reports both required posture conditions
  4. Updated endpoint state passes the required security check without weakening the baseline

Explanation

Correct Answer

C:

Access follows the intended policy only after the agent reports both required posture conditions. It demonstrates that the intended path or control is actually working, not merely configured.

Incorrect Answers

A:

The pilot group enforces the new control without changing the nonpilot cohort's access. It addresses an organization moves its endpoint compliance policy to a stricter baseline and wants to avoid unexpected denial for every remote user at once. In the reported environment, the missing behavior instead relates to a managed endpoint runs antivirus, yet it has stopped sending required endpoint telemetry to the FortiSASE management service. The relevant choice is access follows the intended policy only after the agent reports both required posture conditions.

B:

A patched test endpoint receives the compliant tag while a deliberately vulnerable test endpoint receives the intended restriction. The outcome for that step belongs to a remote fleet must reject endpoints with known high or critical vulnerabilities before they reach private applications. Here the decisive requirement concerns a managed endpoint runs antivirus, yet it has stopped sending required endpoint telemetry to the FortiSASE management service, so access follows the intended policy only after the agent reports both required posture conditions is the better fit.

D:

Updated endpoint state passes the required security check without weakening the baseline. It could be appropriate when a security analyst sees a compliant laptop marked as noncompliant even after remediation of its local antivirus settings. However, that does not resolve the stated condition: a managed endpoint runs antivirus, yet it has stopped sending required endpoint telemetry to the FortiSASE management service. A more direct answer is access follows the intended policy only after the agent reports both required posture conditions.

Question 48

For a change review, the team proposes to refresh endpoint posture reporting and verify the rule's effective match data before relaxing policy because: A security analyst sees a compliant laptop marked as noncompliant even after remediation of its local antivirus settings. Which explanation connects the change to the underlying behavior?

  1. Posture enforcement decisions depend on reported endpoint state; stale or mismapped data can cause incorrect classification
  2. Profiles must be scoped to their target populations to avoid unintended fleet-wide change
  3. Endpoint profiles are assigned to AD or non-AD groups based on their configured match conditions
  4. Targeted endpoint profile or compliance assignments support controlled policy changes

Explanation

Correct Answer

A:

Posture enforcement decisions depend on reported endpoint state; stale or mismapped data can cause incorrect classification. This is why the proposed repair addresses the reported behavior; confirm by checking: Updated endpoint state passes the required security check without weakening the baseline.

Incorrect Answers

B:

Profiles must be scoped to their target populations to avoid unintended fleet-wide change. It addresses an administrator copies a strict endpoint profile for a pilot but accidentally applies it to the whole tenant, disrupting unrelated teams. In the reported environment, the missing behavior instead relates to a security analyst sees a compliant laptop marked as noncompliant even after remediation of its local antivirus settings. The relevant choice is posture enforcement decisions depend on reported endpoint state; stale or mismapped data can cause incorrect classification.

C:

Endpoint profiles are assigned to AD or non-AD groups based on their configured match conditions. That is a useful action for a different circumstance: a sales employee installs FortiClient but remains assigned the Default endpoint profile rather than the required departmental protection profile. The present case is constrained by a security analyst sees a compliant laptop marked as noncompliant even after remediation of its local antivirus settings; the targeted response is posture enforcement decisions depend on reported endpoint state; stale or mismapped data can cause incorrect classification.

D:

Targeted endpoint profile or compliance assignments support controlled policy changes. The outcome for that step belongs to an organization moves its endpoint compliance policy to a stricter baseline and wants to avoid unexpected denial for every remote user at once. Here the decisive requirement concerns a security analyst sees a compliant laptop marked as noncompliant even after remediation of its local antivirus settings, so posture enforcement decisions depend on reported endpoint state; stale or mismapped data can cause incorrect classification is the better fit.

Question 49

Before changing the configuration, the team needs to isolate the problem. Which diagnostic check is most targeted here? Incident: A company must prevent employees from uploading a known sensitive document pattern into unapproved SaaS applications.

  1. Inspect the policy action and Profile Group selection for a representative allowed session
  2. Inspect deep-inspection mode, exemption entries and the affected SSO session failure
  3. Inspect inline-CASB application/action criteria and relevant security-event logs
  4. Inspect the DLP profile match rules and whether the application traffic is decryptable where required

Explanation

Correct Answer

D:

Inspect the DLP profile match rules and whether the application traffic is decryptable where required. This check isolates the relevant control before the change. Data loss prevention evaluates sensitive-data patterns or content conditions rather than just the site name.

Incorrect Answers

A:

Inspect the policy action and Profile Group selection for a representative allowed session. It could be appropriate when a remote-user security policy is set to Accept but the administrator expects an IPS profile to be active without having attached a profile group. However, that does not resolve the stated condition: a company must prevent employees from uploading a known sensitive document pattern into unapproved SaaS applications. A more direct answer is inspect the DLP profile match rules and whether the application traffic is decryptable where required.

B:

Inspect deep-inspection mode, exemption entries and the affected SSO session failure. It addresses an agentless SWG with SSO must inspect HTTPS but has a certificate-inspection exception for every authentication domain. In the reported environment, the missing behavior instead relates to a company must prevent employees from uploading a known sensitive document pattern into unapproved SaaS applications. The relevant choice is inspect the DLP profile match rules and whether the application traffic is decryptable where required.

C:

Inspect inline-CASB application/action criteria and relevant security-event logs. That is a useful action for a different circumstance: a sanctioned collaboration app is allowed, but management wants to prevent an unapproved file transfer action within that SaaS application. The present case is constrained by a company must prevent employees from uploading a known sensitive document pattern into unapproved SaaS applications; the targeted response is inspect the DLP profile match rules and whether the application traffic is decryptable where required.

Question 50

At a FortiSASE/SD-WAN site, this issue is reported: A branch was built with two SD-WAN members, but a team assumes this alone automatically adds application inspection to client sessions. What is the most direct technical change to address the stated requirement?

  1. Add both WAN interfaces as SD-WAN members in an appropriate zone before defining the steering rule
  2. Complete the backup interface's appropriate DHCP or static IP configuration and gateway settings
  3. Apply the required security profiles to the matching allow firewall policy independently of SD-WAN member setup
  4. Define traffic-matching SD-WAN steering rules, with relevant quality targets and the required firewall permissions

Explanation

Correct Answer

C:

Apply the required security profiles to the matching allow firewall policy independently of SD-WAN member setup. Path selection and security inspection are separate controls in FortiOS. The configuration alone must be followed by a functioning test: An allowed session uses an SD-WAN member while the relevant content/security event is logged by its profile.

Incorrect Answers

A:

Add both WAN interfaces as SD-WAN members in an appropriate zone before defining the steering rule. It could be appropriate when a new branch has two internet circuits configured as ordinary FortiGate interfaces, but no SD-WAN members exist; the owner wants policy-based path steering. However, that does not resolve the stated condition: a branch was built with two SD-WAN members, but a team assumes this alone automatically adds application inspection to client sessions. A more direct answer is apply the required security profiles to the matching allow firewall policy independently of SD-WAN member setup.

B:

Complete the backup interface's appropriate DHCP or static IP configuration and gateway settings. It addresses during branch turn-up, the backup ISP port shows link-up but has no assigned IP or gateway from its provider. In the reported environment, the missing behavior instead relates to a branch was built with two SD-WAN members, but a team assumes this alone automatically adds application inspection to client sessions. The relevant choice is apply the required security profiles to the matching allow firewall policy independently of SD-WAN member setup.

D:

Define traffic-matching SD-WAN steering rules, with relevant quality targets and the required firewall permissions. The outcome for that step belongs to an administrator plans to give video conferencing first priority over bulk patch downloads on a two-link branch. Here the decisive requirement concerns a branch was built with two SD-WAN members, but a team assumes this alone automatically adds application inspection to client sessions, so apply the required security profiles to the matching allow firewall policy independently of SD-WAN member setup is the better fit.


Fortinet NSE 5 - FortiSASE and SD-WAN 7.6 Core Administrator (NSE5_SSE_AD-7.6) Practice Tests

Purchase Individually

NSE5_SSE_AD-7.6 Premium File

Premium File
NSE5_SSE_AD-7.6 Premium File
54 Q&A
$76.99$69.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.