Pass Your CompTIA 220-1201 Exam Easy!

CompTIA 220-1201 Exam Questions & Answers, Accurate & Verified By IT Experts

Instant Download, Free Fast Updates, 99.6% Pass Rate

220-1201 Premium Bundle

$79.99

CompTIA 220-1201 Premium Bundle

220-1201 Premium File: 527 Questions & Answers

Last Update: Oct 05, 2026

220-1201 Training Course: 106 Video Lectures

220-1201 PDF Study Guide: 2615 Pages

220-1201 Bundle gives you unlimited access to "220-1201" files. However, this does not replace the need for a .vce exam simulator. To download VCE exam simulator click here
CompTIA 220-1201 Premium Bundle
CompTIA 220-1201 Premium Bundle

220-1201 Premium File: 527 Questions & Answers

Last Update: Oct 05, 2026

220-1201 Training Course: 106 Video Lectures

220-1201 PDF Study Guide: 2615 Pages

$79.99

220-1201 Bundle gives you unlimited access to "220-1201" files. However, this does not replace the need for a .vce exam simulator. To download your .vce exam simulator click here

CompTIA 220-1201 Practice Test 85

Question 840

An end user reports the following condition: A new access point restarts whenever two radios are heavily loaded and the switch's PoE budget is nearly exhausted. What should the support specialist recommend FIRST within the stated limits?

  1. Confirm the AP's bridge mode and a working upstream router/default gateway.
  2. Connect through a compatible PoE switch port with sufficient power budget.
  3. Install an appropriate rated PoE injector between the switch and the camera.
  4. Check required PoE class and available switch power budget before changing Wi-Fi channels.

Explanation

Correct Answer

D:

Insufficient PoE power allocation can cause resets when a device draws near its specified maximum.

Incorrect Answers

A:

Confirming the AP's bridge mode and a working upstream router/default gateway would not check required PoE class and available switch power budget.

B:

Connecting through a compatible PoE switch port with sufficient power budget would not check required PoE class and available switch power budget.

C:

Installing an appropriate rated PoE injector between the switch and the camera would not check required PoE class and available switch power budget.

Question 841

A help desk receives a support ticket with this evidence: A user plugs an Ethernet-only desktop into a wireless access point and expects the access point's SSID alone to supply routing to the ISP. What is the MOST appropriate technician action?

  1. Install an appropriate rated PoE injector between the switch and the camera.
  2. Check required PoE class and available switch power budget before changing Wi-Fi channels.
  3. Confirm the AP's bridge mode and a working upstream router/default gateway.
  4. Connect through a compatible PoE switch port with sufficient power budget.

Explanation

Correct Answer

C:

Access points usually bridge wireless clients to a wired LAN; routing and ISP access may require other devices.

Incorrect Answers

A:

Installing an appropriate rated PoE injector between the switch and the camera would not confirm the AP's bridge mode and a working upstream router/default gateway.

B:

Checking required PoE class and available switch power budget would not confirm the AP's bridge mode and a working upstream router/default gateway.

D:

Connecting through a compatible PoE switch port with sufficient power budget would not confirm the AP's bridge mode and a working upstream router/default gateway.

Question 842

A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A ceiling-mounted wireless access point has an Ethernet uplink but no nearby power outlet, and the switch supports PoE. An existing network switch provides no PoE, but a single compatible IP camera requires power through its Ethernet drop. Which course of action addresses the stated issues?

  1. Connect through a compatible PoE switch port with sufficient power budget; confirm the AP's bridge mode and a working upstream router/default gateway.
  2. Check required PoE class and available switch power budget before changing Wi-Fi channels; confirm the AP's bridge mode and a working upstream router/default gateway.
  3. Connect through a compatible PoE switch port with sufficient power budget; install an appropriate rated PoE injector between the switch and the camera.
  4. Check required PoE class and available switch power budget before changing Wi-Fi channels; install an appropriate rated PoE injector between the switch and the camera.

Explanation

Correct Answer

C:

For ticket (1), Power over Ethernet delivers electrical power and data over the same supported cable run. For ticket (2), A PoE injector adds power without replacing all non-PoE switching hardware.

Incorrect Answers

A:

For ticket 2, install an appropriate rated PoE injector between the switch and the camera. A PoE injector adds power without replacing all non-PoE switching hardware.

B:

For ticket 1, connect through a compatible PoE switch port with sufficient power budget. Power over Ethernet delivers electrical power and data over the same supported cable run. For ticket 2, install an appropriate rated PoE injector between the switch and the camera. A PoE injector adds power without replacing all non-PoE switching hardware.

D:

For ticket 1, connect through a compatible PoE switch port with sufficient power budget. Power over Ethernet delivers electrical power and data over the same supported cable run.

Question 843

A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A ceiling-mounted wireless access point has an Ethernet uplink but no nearby power outlet, and the switch supports PoE. A new access point restarts whenever two radios are heavily loaded and the switch's PoE budget is nearly exhausted. Which response best addresses these needs?

  1. Connect through a compatible PoE switch port with sufficient power budget; confirm the AP's bridge mode and a working upstream router/default gateway.
  2. Install an appropriate rated PoE injector between the switch and the camera; confirm the AP's bridge mode and a working upstream router/default gateway.
  3. Connect through a compatible PoE switch port with sufficient power budget; check required PoE class and available switch power budget before changing Wi-Fi channels.
  4. Install an appropriate rated PoE injector between the switch and the camera; check required PoE class and available switch power budget before changing Wi-Fi channels.

Explanation

Correct Answer

C:

For ticket (1), Power over Ethernet delivers electrical power and data over the same supported cable run. For ticket (2), Insufficient PoE power allocation can cause resets when a device draws near its specified maximum.

Incorrect Answers

A:

For ticket 2, check required PoE class and available switch power budget before changing Wi-Fi channels. Insufficient PoE power allocation can cause resets when a device draws near its specified maximum.

B:

For ticket 1, connect through a compatible PoE switch port with sufficient power budget. Power over Ethernet delivers electrical power and data over the same supported cable run. For ticket 2, check required PoE class and available switch power budget before changing Wi-Fi channels. Insufficient PoE power allocation can cause resets when a device draws near its specified maximum.

D:

For ticket 1, connect through a compatible PoE switch port with sufficient power budget. Power over Ethernet delivers electrical power and data over the same supported cable run.

Question 844

A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: An existing network switch provides no PoE, but a single compatible IP camera requires power through its Ethernet drop. A user plugs an Ethernet-only desktop into a wireless access point and expects the access point's SSID alone to supply routing to the ISP. What is the most appropriate plan for this situation?

  1. Install an appropriate rated PoE injector between the switch and the camera; confirm the AP's bridge mode and a working upstream router/default gateway.
  2. Connect through a compatible PoE switch port with sufficient power budget; confirm the AP's bridge mode and a working upstream router/default gateway.
  3. Install an appropriate rated PoE injector between the switch and the camera; check required PoE class and available switch power budget before changing Wi-Fi channels.
  4. Connect through a compatible PoE switch port with sufficient power budget; check required PoE class and available switch power budget before changing Wi-Fi channels.

Explanation

Correct Answer

A:

For ticket (1), A PoE injector adds power without replacing all non-PoE switching hardware. For ticket (2), Access points usually bridge wireless clients to a wired LAN; routing and ISP access may require other devices.

Incorrect Answers

B:

For ticket 1, install an appropriate rated PoE injector between the switch and the camera. A PoE injector adds power without replacing all non-PoE switching hardware.

C:

For ticket 2, confirm the AP's bridge mode and a working upstream router/default gateway. Access points usually bridge wireless clients to a wired LAN; routing and ISP access may require other devices.

D:

For ticket 1, install an appropriate rated PoE injector between the switch and the camera. A PoE injector adds power without replacing all non-PoE switching hardware. For ticket 2, confirm the AP's bridge mode and a working upstream router/default gateway. Access points usually bridge wireless clients to a wired LAN; routing and ISP access may require other devices.

Question 845

A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A new access point restarts whenever two radios are heavily loaded and the switch's PoE budget is nearly exhausted. A user plugs an Ethernet-only desktop into a wireless access point and expects the access point's SSID alone to supply routing to the ISP. Which course of action addresses the stated issues?

  1. Check required PoE class and available switch power budget before changing Wi-Fi channels; confirm the AP's bridge mode and a working upstream router/default gateway.
  2. Connect through a compatible PoE switch port with sufficient power budget; confirm the AP's bridge mode and a working upstream router/default gateway.
  3. Check required PoE class and available switch power budget before changing Wi-Fi channels; install an appropriate rated PoE injector between the switch and the camera.
  4. Connect through a compatible PoE switch port with sufficient power budget; install an appropriate rated PoE injector between the switch and the camera.

Explanation

Correct Answer

A:

For ticket (1), Insufficient PoE power allocation can cause resets when a device draws near its specified maximum. For ticket (2), Access points usually bridge wireless clients to a wired LAN; routing and ISP access may require other devices.

Incorrect Answers

B:

For ticket 1, check required PoE class and available switch power budget before changing Wi-Fi channels. Insufficient PoE power allocation can cause resets when a device draws near its specified maximum.

C:

For ticket 2, confirm the AP's bridge mode and a working upstream router/default gateway. Access points usually bridge wireless clients to a wired LAN; routing and ISP access may require other devices.

D:

For ticket 1, check required PoE class and available switch power budget before changing Wi-Fi channels. Insufficient PoE power allocation can cause resets when a device draws near its specified maximum. For ticket 2, confirm the AP's bridge mode and a working upstream router/default gateway. Access points usually bridge wireless clients to a wired LAN; routing and ISP access may require other devices.

Question 846

A service coordinator has THREE separate support tickets and needs the correct matching actions: A ceiling-mounted wireless access point has an Ethernet uplink but no nearby power outlet, and the switch supports PoE. An existing network switch provides no PoE, but a single compatible IP camera requires power through its Ethernet drop. A new access point restarts whenever two radios are heavily loaded and the switch's PoE budget is nearly exhausted. Which response best addresses these needs?

  1. Connect through a compatible PoE switch port with sufficient power budget; install an appropriate rated PoE injector between the switch and the camera; and check required PoE class and available switch power budget before changing Wi-Fi channels.
  2. Confirm the AP's bridge mode and a working upstream router/default gateway; install an appropriate rated PoE injector between the switch and the camera; and check required PoE class and available switch power budget before changing Wi-Fi channels.
  3. Connect through a compatible PoE switch port with sufficient power budget; confirm the AP's bridge mode and a working upstream router/default gateway; and check required PoE class and available switch power budget before changing Wi-Fi channels.
  4. Connect through a compatible PoE switch port with sufficient power budget; install an appropriate rated PoE injector between the switch and the camera; and confirm the AP's bridge mode and a working upstream router/default gateway.

Explanation

Correct Answer

A:

For ticket (1), Power over Ethernet delivers electrical power and data over the same supported cable run. For ticket (2), A PoE injector adds power without replacing all non-PoE switching hardware. For ticket (3), Insufficient PoE power allocation can cause resets when a device draws near its specified maximum.

Incorrect Answers

B:

For ticket 1, connect through a compatible PoE switch port with sufficient power budget. Power over Ethernet delivers electrical power and data over the same supported cable run.

C:

For ticket 2, install an appropriate rated PoE injector between the switch and the camera. A PoE injector adds power without replacing all non-PoE switching hardware.

D:

For ticket 3, check required PoE class and available switch power budget before changing Wi-Fi channels. Insufficient PoE power allocation can cause resets when a device draws near its specified maximum.

Question 847

A device support specialist must respond to this request: A long carrier fiber link needs a narrow optical core and long-reach transceivers, but the installer orders a multimode short-range patch. Which next step MOST directly resolves the reported condition?

  1. Match supported single-mode fiber and optical transceivers for the link budget.
  2. Match multimode fiber type and transceiver specification to the existing link.
  3. Choose a compatible LC-to-LC assembly or approved optical adapter matched to the panel.
  4. Identify the ST connector and match its bayonet coupling to the correct port.

Explanation

Correct Answer

A:

Single-mode fiber generally supports longer links with appropriate optical equipment.

Incorrect Answers

B:

Matching multimode fiber type and transceiver specification to the existing link would not match supported single-mode fiber and optical transceivers for the link budget.

C:

Choosing a compatible LC-to-LC assembly or approved optical adapter matched to the panel would not match supported single-mode fiber and optical transceivers for the link budget.

D:

Identifying the ST connector and matching its bayonet coupling to the correct port would not match supported single-mode fiber and optical transceivers for the link budget.

Question 848

An end user reports the following condition: An office backbone uses short-range multimode optics and a technician buys a single-mode assembly with incompatible transceivers. What should the support specialist recommend FIRST within the stated limits?

  1. Match supported single-mode fiber and optical transceivers for the link budget.
  2. Match multimode fiber type and transceiver specification to the existing link.
  3. Choose a compatible LC-to-LC assembly or approved optical adapter matched to the panel.
  4. Identify the ST connector and match its bayonet coupling to the correct port.

Explanation

Correct Answer

B:

Fiber cabling and optical modules must agree on media, wavelength and optical link characteristics.

Incorrect Answers

A:

Matching supported single-mode fiber and optical transceivers for the link budget would not match multimode fiber type and transceiver specification to the existing link.

C:

Choosing a compatible LC-to-LC assembly or approved optical adapter matched to the panel would not match multimode fiber type and transceiver specification to the existing link.

D:

Identifying the ST connector and matching its bayonet coupling to the correct port would not match multimode fiber type and transceiver specification to the existing link.

Question 849

A help desk receives a support ticket with this evidence: A patch panel uses small duplex LC optical connectors but the replacement cable has larger square SC connectors. What is the MOST appropriate technician action?

  1. Match supported single-mode fiber and optical transceivers for the link budget.
  2. Match multimode fiber type and transceiver specification to the existing link.
  3. Choose a compatible LC-to-LC assembly or approved optical adapter matched to the panel.
  4. Identify the ST connector and match its bayonet coupling to the correct port.

Explanation

Correct Answer

C:

LC and SC have different physical connector housings and cannot be forced together.

Incorrect Answers

A:

Single-mode fiber generally supports longer links with appropriate optical equipment; lC and SC have different physical connector housings and cannot be forced together.

B:

Fiber cabling and optical modules must agree on media, wavelength and optical link characteristics; lC and SC have different physical connector housings and cannot be forced together.

D:

ST uses a round twist-lock coupling rather than the push-pull housings of SC or LC; lC and SC have different physical connector housings and cannot be forced together.

Question 850

A field technician verifies the following customer equipment condition: A technician is handed a fiber connector with a bayonet twist-lock design and mistakes it for a rectangular push-pull SC. Which response BEST addresses the actual cause or requirement?

  1. Identify the ST connector and match its bayonet coupling to the correct port.
  2. Match supported single-mode fiber and optical transceivers for the link budget.
  3. Match multimode fiber type and transceiver specification to the existing link.
  4. Choose a compatible LC-to-LC assembly or approved optical adapter matched to the panel.

Explanation

Correct Answer

A:

ST uses a round twist-lock coupling rather than the push-pull housings of SC or LC.

Incorrect Answers

B:

Matching supported single-mode fiber and optical transceivers for the link budget would not identify the ST connector and match its bayonet coupling to the correct port.

C:

Matching multimode fiber type and transceiver specification to the existing link would not identify the ST connector and match its bayonet coupling to the correct port.

D:

Choosing a compatible LC-to-LC assembly or approved optical adapter matched to the panel would not identify the ST connector and match its bayonet coupling to the correct port.


CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests

Purchase Individually

220-1201 Premium File

Premium File
220-1201 Premium File
527 Q&A
$76.99$69.99

220-1201 Training Video Course

Training Course
220-1201 Training Video Course
106 Lectures
$27.49$24.99

220-1201 Study Guide

Study Guide
220-1201 Study Guide
2615 PDF Pages
$27.49$24.99

Site Search:

 

VISA, MasterCard, AmericanExpress, UnionPay

SPECIAL OFFER: GET 10% OFF

ExamCollection Premium

ExamCollection Premium Files

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads
Enter Your Email Address to Receive Your 10% Off Discount Code
A Confirmation Link will be sent to this email address to verify your login
We value your privacy. We will not rent or sell your email address

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Next

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.