Question 470
A support case documents the following situation: A company's fingerprint reader cannot enroll employees after a palm-rest assembly was replaced with a model lacking its sensor. Which response BEST addresses the actual cause or requirement?
- Verify the replacement assembly includes the supported biometric hardware and required firmware enrollment path.
- Reseat the approved NFC reader cable and verify the device in firmware or hardware inventory.
- Inspect the damaged hardware privacy switch before changing application permissions.
- Confirm the physical camera shutter and privacy switch position before reinstalling drivers.
Explanation
Correct Answer
A:Authentication setup cannot create a missing physical sensor through driver changes.
Incorrect Answers
B:Reseat the approved NFC reader cable and verify the device in firmware or hardware inventory would not verify the replacement assembly includes the supported biometric hardware and required firmware enrollment path.
C:Inspecting the damaged hardware privacy switch would not verify the replacement assembly includes the supported biometric hardware and required firmware enrollment path.
D:Confirming the physical camera shutter and privacy switch position would not verify the replacement assembly includes the supported biometric hardware and required firmware enrollment path.
Question 471
A device support specialist must respond to this request: A laptop's NFC badge reader is no longer detected after its top-cover wiring was disconnected for repair. Which next step MOST directly resolves the reported condition?
- Inspect the damaged hardware privacy switch before changing application permissions.
- Confirm the physical camera shutter and privacy switch position before reinstalling drivers.
- Verify the replacement assembly includes the supported biometric hardware and required firmware enrollment path.
- Reseat the approved NFC reader cable and verify the device in firmware or hardware inventory.
Explanation
Correct Answer
D:A near-field reader uses a dedicated interface that can be disturbed during chassis work.
Incorrect Answers
A:Software grants cannot override an independent physical circuit that disconnects the camera; a near-field reader uses a dedicated interface that can be disturbed during chassis work.
B:Hardware privacy covers or cutoffs can intentionally disable capture independently of software health; a near-field reader uses a dedicated interface that can be disturbed during chassis work.
C:Authentication setup cannot create a missing physical sensor through driver changes; a near-field reader uses a dedicated interface that can be disturbed during chassis work.
Question 472
An end user reports the following condition: An employee's laptop is dropped and the physical privacy switch is stuck on, but software camera permissions show allowed. What should the support specialist recommend FIRST within the stated limits?
- Reseat the approved NFC reader cable and verify the device in firmware or hardware inventory.
- Inspect the damaged hardware privacy switch before changing application permissions.
- Confirm the physical camera shutter and privacy switch position before reinstalling drivers.
- Verify the replacement assembly includes the supported biometric hardware and required firmware enrollment path.
Explanation
Correct Answer
B:Software grants cannot override an independent physical circuit that disconnects the camera.
Incorrect Answers
A:Reseat the approved NFC reader cable and verify the device in firmware or hardware inventory would not inspect the damaged hardware privacy switch.
C:Confirming the physical camera shutter and privacy switch position would not inspect the damaged hardware privacy switch. Software grants cannot override an independent physical circuit that disconnects the camera.
D:Verifying the replacement assembly includes the supported biometric hardware and required firmware enrollment path would not inspect the damaged hardware privacy switch.
Question 473
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A notebook's camera reports unavailable immediately after a privacy shutter was slid closed by the employee. A company's fingerprint reader cannot enroll employees after a palm-rest assembly was replaced with a model lacking its sensor. Which course of action addresses the stated issues?
- Confirm the physical camera shutter and privacy switch position before reinstalling drivers; verify the replacement assembly includes the supported biometric hardware and required firmware enrollment path.
- Reseat the approved NFC reader cable and verify the device in firmware or hardware inventory; verify the replacement assembly includes the supported biometric hardware and required firmware enrollment path.
- Confirm the physical camera shutter and privacy switch position before reinstalling drivers; inspect the damaged hardware privacy switch before changing application permissions.
- Reseat the approved NFC reader cable and verify the device in firmware or hardware inventory; inspect the damaged hardware privacy switch before changing application permissions.
Explanation
Correct Answer
A:For ticket (1), Hardware privacy covers or cutoffs can intentionally disable capture independently of software health. For ticket (2), Authentication setup cannot create a missing physical sensor through driver changes.
Incorrect Answers
B:For ticket 1, confirm the physical camera shutter and privacy switch position before reinstalling drivers. Hardware privacy covers or cutoffs can intentionally disable capture independently of software health.
C:For ticket 2, verify the replacement assembly includes the supported biometric hardware and required firmware enrollment path. Authentication setup cannot create a missing physical sensor through driver changes.
D:For ticket 1, confirm the physical camera shutter and privacy switch position before reinstalling drivers. Hardware privacy covers or cutoffs can intentionally disable capture independently of software health. For ticket 2, verify the replacement assembly includes the supported biometric hardware and required firmware enrollment path. Authentication setup cannot create a missing physical sensor through driver changes.
Question 474
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A notebook's camera reports unavailable immediately after a privacy shutter was slid closed by the employee. A laptop's NFC badge reader is no longer detected after its top-cover wiring was disconnected for repair. Which response best addresses these needs?
- Verify the replacement assembly includes the supported biometric hardware and required firmware enrollment path; inspect the damaged hardware privacy switch before changing application permissions.
- Confirm the physical camera shutter and privacy switch position before reinstalling drivers; Reseat the approved NFC reader cable and verify the device in firmware or hardware inventory.
- Verify the replacement assembly includes the supported biometric hardware and required firmware enrollment path; Reseat the approved NFC reader cable and verify the device in firmware or hardware inventory.
- Confirm the physical camera shutter and privacy switch position before reinstalling drivers; inspect the damaged hardware privacy switch before changing application permissions.
Explanation
Correct Answer
B:For ticket (1), Hardware privacy covers or cutoffs can intentionally disable capture independently of software health. For ticket (2), A near-field reader uses a dedicated interface that can be disturbed during chassis work.
Incorrect Answers
A:For ticket 1, confirm the physical camera shutter and privacy switch position before reinstalling drivers. Hardware privacy covers or cutoffs can intentionally disable capture independently of software health. For ticket 2, reseat the approved NFC reader cable and verify the device in firmware or hardware inventory. A near-field reader uses a dedicated interface that can be disturbed during chassis work.
C:For ticket 1, confirm the physical camera shutter and privacy switch position before reinstalling drivers. Hardware privacy covers or cutoffs can intentionally disable capture independently of software health.
D:For ticket 2, reseat the approved NFC reader cable and verify the device in firmware or hardware inventory. A near-field reader uses a dedicated interface that can be disturbed during chassis work.
Question 475
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A company's fingerprint reader cannot enroll employees after a palm-rest assembly was replaced with a model lacking its sensor. An employee's laptop is dropped and the physical privacy switch is stuck on, but software camera permissions show allowed. What is the most appropriate plan for this situation?
- Verify the replacement assembly includes the supported biometric hardware and required firmware enrollment path; Reseat the approved NFC reader cable and verify the device in firmware or hardware inventory.
- Confirm the physical camera shutter and privacy switch position before reinstalling drivers; Reseat the approved NFC reader cable and verify the device in firmware or hardware inventory.
- Verify the replacement assembly includes the supported biometric hardware and required firmware enrollment path; inspect the damaged hardware privacy switch before changing application permissions.
- Confirm the physical camera shutter and privacy switch position before reinstalling drivers; inspect the damaged hardware privacy switch before changing application permissions.
Explanation
Correct Answer
C:For ticket (1), Authentication setup cannot create a missing physical sensor through driver changes. For ticket (2), Software grants cannot override an independent physical circuit that disconnects the camera.
Incorrect Answers
A:For ticket 2, inspect the damaged hardware privacy switch before changing application permissions. Software grants cannot override an independent physical circuit that disconnects the camera.
B:For ticket 1, verify the replacement assembly includes the supported biometric hardware and required firmware enrollment path. Authentication setup cannot create a missing physical sensor through driver changes. For ticket 2, inspect the damaged hardware privacy switch before changing application permissions. Software grants cannot override an independent physical circuit that disconnects the camera.
D:For ticket 1, verify the replacement assembly includes the supported biometric hardware and required firmware enrollment path. Authentication setup cannot create a missing physical sensor through driver changes.
Question 476
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A laptop's NFC badge reader is no longer detected after its top-cover wiring was disconnected for repair. An employee's laptop is dropped and the physical privacy switch is stuck on, but software camera permissions show allowed. Which course of action addresses the stated issues?
- Reseat the approved NFC reader cable and verify the device in firmware or hardware inventory; verify the replacement assembly includes the supported biometric hardware and required firmware enrollment path.
- Confirm the physical camera shutter and privacy switch position before reinstalling drivers; verify the replacement assembly includes the supported biometric hardware and required firmware enrollment path.
- Reseat the approved NFC reader cable and verify the device in firmware or hardware inventory; inspect the damaged hardware privacy switch before changing application permissions.
- Confirm the physical camera shutter and privacy switch position before reinstalling drivers; inspect the damaged hardware privacy switch before changing application permissions.
Explanation
Correct Answer
C:For ticket (1), A near-field reader uses a dedicated interface that can be disturbed during chassis work. For ticket (2), Software grants cannot override an independent physical circuit that disconnects the camera.
Incorrect Answers
A:For ticket 2, inspect the damaged hardware privacy switch before changing application permissions. Software grants cannot override an independent physical circuit that disconnects the camera.
B:For ticket 1, reseat the approved NFC reader cable and verify the device in firmware or hardware inventory. A near-field reader uses a dedicated interface that can be disturbed during chassis work. For ticket 2, inspect the damaged hardware privacy switch before changing application permissions. Software grants cannot override an independent physical circuit that disconnects the camera.
D:For ticket 1, reseat the approved NFC reader cable and verify the device in firmware or hardware inventory. A near-field reader uses a dedicated interface that can be disturbed during chassis work.
Question 477
A service coordinator has THREE separate support tickets and needs the correct matching actions: A notebook's camera reports unavailable immediately after a privacy shutter was slid closed by the employee. A company's fingerprint reader cannot enroll employees after a palm-rest assembly was replaced with a model lacking its sensor. A laptop's NFC badge reader is no longer detected after its top-cover wiring was disconnected for repair. Which response best addresses these needs?
- Confirm the physical camera shutter and privacy switch position before reinstalling drivers; inspect the damaged hardware privacy switch before changing application permissions; and Reseat the approved NFC reader cable and verify the device in firmware or hardware inventory.
- Confirm the physical camera shutter and privacy switch position before reinstalling drivers; verify the replacement assembly includes the supported biometric hardware and required firmware enrollment path; and inspect the damaged hardware privacy switch before changing application permissions.
- Confirm the physical camera shutter and privacy switch position before reinstalling drivers; verify the replacement assembly includes the supported biometric hardware and required firmware enrollment path; and Reseat the approved NFC reader cable and verify the device in firmware or hardware inventory.
- Inspect the damaged hardware privacy switch before changing application permissions; verify the replacement assembly includes the supported biometric hardware and required firmware enrollment path; and Reseat the approved NFC reader cable and verify the device in firmware or hardware inventory.
Explanation
Correct Answer
C:For ticket (1), Hardware privacy covers or cutoffs can intentionally disable capture independently of software health. For ticket (2), Authentication setup cannot create a missing physical sensor through driver changes. For ticket (3), A near-field reader uses a dedicated interface that can be disturbed during chassis work.
Incorrect Answers
A:For ticket 2, verify the replacement assembly includes the supported biometric hardware and required firmware enrollment path. Authentication setup cannot create a missing physical sensor through driver changes.
B:For ticket 3, reseat the approved NFC reader cable and verify the device in firmware or hardware inventory. A near-field reader uses a dedicated interface that can be disturbed during chassis work.
D:For ticket 1, confirm the physical camera shutter and privacy switch position before reinstalling drivers. Hardware privacy covers or cutoffs can intentionally disable capture independently of software health.
Question 478
A support case documents the following situation: A notebook runs normally on AC but shuts off instantly when its charger is removed, even though the operating system shows 96 percent charge. Which response BEST addresses the actual cause or requirement?
- Halt installation and obtain a battery matching the manufacturer-specified electrical and physical requirements.
- Reseat the battery connector and verify recognition in firmware before assuming the replacement cells are defective.
- Test the battery health and connector, then replace the failed pack with a compatible approved part.
- Power down, stop charging, and arrange trained removal of the damaged battery without puncturing it.
Explanation
Correct Answer
C:A reported charge percentage does not establish that aging cells can deliver current under load.
Incorrect Answers
A:Halt installation and obtain a battery matching the manufacturer-specified electrical and physical requirements would not test the battery health and connector, then replace the failed pack with a compatible approved part.
B:Reseat the battery connector and verify recognition in firmware would not test the battery health and connector, then replace the failed pack with a compatible approved part.
D:Power down, stop charging, and arrange trained removal of the damaged battery without puncturing it would not test the battery health and connector, then replace the failed pack with a compatible approved part.
Question 479
A device support specialist must respond to this request: A swollen laptop battery lifts the trackpad assembly and prevents the bottom cover from sitting flush. Which next step MOST directly resolves the reported condition?
- Halt installation and obtain a battery matching the manufacturer-specified electrical and physical requirements.
- Reseat the battery connector and verify recognition in firmware before assuming the replacement cells are defective.
- Test the battery health and connector, then replace the failed pack with a compatible approved part.
- Power down, stop charging, and arrange trained removal of the damaged battery without puncturing it.
Explanation
Correct Answer
D:A physically swollen lithium-ion pack presents fire and injury risks that outweigh ordinary repair convenience.
Incorrect Answers
A:Connector fit alone does not prove a battery is safe or compatible with the charging circuitry; a physically swollen lithium-ion pack presents fire and injury risks that outweigh ordinary repair convenience.
B:Loose internal power or identification contacts can prevent battery enumeration without a cell failure; a physically swollen lithium-ion pack presents fire and injury risks that outweigh ordinary repair convenience.
C:A reported charge percentage does not establish that aging cells can deliver current under load; a physically swollen lithium-ion pack presents fire and injury risks that outweigh ordinary repair convenience.
Question 480
An end user reports the following condition: A new replacement battery is detected but its rated voltage and connector arrangement differ from the laptop service manual. What should the support specialist recommend FIRST within the stated limits?
- Halt installation and obtain a battery matching the manufacturer-specified electrical and physical requirements.
- Reseat the battery connector and verify recognition in firmware before assuming the replacement cells are defective.
- Test the battery health and connector, then replace the failed pack with a compatible approved part.
- Power down, stop charging, and arrange trained removal of the damaged battery without puncturing it.
Explanation
Correct Answer
A:Connector fit alone does not prove a battery is safe or compatible with the charging circuitry.
Incorrect Answers
B:Loose internal power or identification contacts can prevent battery enumeration without a cell failure; connector fit alone does not prove a battery is safe or compatible with the charging circuitry.
C:A reported charge percentage does not establish that aging cells can deliver current under load; connector fit alone does not prove a battery is safe or compatible with the charging circuitry.
D:A physically swollen lithium-ion pack presents fire and injury risks that outweigh ordinary repair convenience; connector fit alone does not prove a battery is safe or compatible with the charging circuitry.
CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests