Question 370
A field technician verifies the following customer equipment condition: A high-end desktop shuts off only when the GPU and CPU both draw peak current, with normal temperatures recorded. Which response BEST addresses the actual cause or requirement?
- Replace the supported CMOS/RTC battery and reconfigure UEFI settings as needed.
- Connect the manufacturer's specified expansion-card power lead and verify the supply budget.
- Restore the known-good firmware settings and verify the storage controller/boot mode.
- Check PSU capacity and transient load behavior before replacing the CPU cooler.
Explanation
Correct Answer
D:Power demand may exceed the supply despite acceptable component temperatures.
Incorrect Answers
A:Replacing the supported CMOS/RTC battery and reconfigure UEFI settings as needed would not check PSU capacity and transient load behavior.
B:Connecting the manufacturer's specified expansion-card power lead and verifying the supply budget would not check PSU capacity and transient load behavior.
C:Restoring the known-good firmware settings and verifying the storage controller/boot mode would not check PSU capacity and transient load behavior.
Question 371
An IT support worker is asked to resolve this case: A computer loses firmware date and custom boot settings whenever it remains unplugged overnight. Which next step MOST directly resolves the reported condition?
- Check PSU capacity and transient load behavior before replacing the CPU cooler.
- Replace the supported CMOS/RTC battery and reconfigure UEFI settings as needed.
- Connect the manufacturer's specified expansion-card power lead and verify the supply budget.
- Restore the known-good firmware settings and verify the storage controller/boot mode.
Explanation
Correct Answer
B:The RTC battery maintains time and some firmware state when mains power is disconnected.
Incorrect Answers
A:Checking PSU capacity and transient load behavior would not replace the supported CMOS/RTC battery and reconfigure UEFI settings as needed.
C:Connecting the manufacturer's specified expansion-card power lead and verifying the supply budget would not replace the supported CMOS/RTC battery and reconfigure UEFI settings as needed.
D:Restoring the known-good firmware settings and verifying the storage controller/boot mode would not replace the supported CMOS/RTC battery and reconfigure UEFI settings as needed.
Question 372
A service bench observes this hardware or network symptom: A workstation intermittently resets after an expansion card was installed and its auxiliary power connector remains unplugged. What should the support specialist recommend FIRST within the stated limits?
- Connect the manufacturer's specified expansion-card power lead and verify the supply budget.
- Restore the known-good firmware settings and verify the storage controller/boot mode.
- Check PSU capacity and transient load behavior before replacing the CPU cooler.
- Replace the supported CMOS/RTC battery and reconfigure UEFI settings as needed.
Explanation
Correct Answer
A:Unpowered expansion devices can fail under load and trigger unstable system operation.
Incorrect Answers
B:Restoring the known-good firmware settings and verifying the storage controller/boot mode would not connect the manufacturer's specified expansion-card power lead and verify the supply budget.
C:Checking PSU capacity and transient load behavior would not connect the manufacturer's specified expansion-card power lead and verify the supply budget.
D:Replacing the supported CMOS/RTC battery and reconfigure UEFI settings as needed would not connect the manufacturer's specified expansion-card power lead and verify the supply budget.
Question 373
During a controlled office IT maintenance window, the technician notes: A technician changes several BIOS options at once and the PC stops detecting its boot disk although hardware tests pass. What is the MOST appropriate technician action?
- Connect the manufacturer's specified expansion-card power lead and verify the supply budget.
- Restore the known-good firmware settings and verify the storage controller/boot mode.
- Check PSU capacity and transient load behavior before replacing the CPU cooler.
- Replace the supported CMOS/RTC battery and reconfigure UEFI settings as needed.
Explanation
Correct Answer
B:Configuration changes can prevent an otherwise healthy installed OS from appearing bootable.
Incorrect Answers
A:Connecting the manufacturer's specified expansion-card power lead and verifying the supply budget would not restore the known-good firmware settings and verify the storage controller/boot mode.
C:Checking PSU capacity and transient load behavior would not restore the known-good firmware settings and verify the storage controller/boot mode.
D:Replacing the supported CMOS/RTC battery and reconfigure UEFI settings as needed would not restore the known-good firmware settings and verify the storage controller/boot mode.
Question 374
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A high-end desktop shuts off only when the GPU and CPU both draw peak current, with normal temperatures recorded. A computer loses firmware date and custom boot settings whenever it remains unplugged overnight. Which course of action addresses the stated issues?
- Check PSU capacity and transient load behavior before replacing the CPU cooler; restore the known-good firmware settings and verify the storage controller/boot mode.
- Connect the manufacturer's specified expansion-card power lead and verify the supply budget; restore the known-good firmware settings and verify the storage controller/boot mode.
- Check PSU capacity and transient load behavior before replacing the CPU cooler; replace the supported CMOS/RTC battery and reconfigure UEFI settings as needed.
- Connect the manufacturer's specified expansion-card power lead and verify the supply budget; replace the supported CMOS/RTC battery and reconfigure UEFI settings as needed.
Explanation
Correct Answer
C:For ticket (1), Power demand may exceed the supply despite acceptable component temperatures. For ticket (2), The RTC battery maintains time and some firmware state when mains power is disconnected.
Incorrect Answers
A:For ticket 2, replace the supported CMOS/RTC battery and reconfigure UEFI settings as needed. The RTC battery maintains time and some firmware state when mains power is disconnected.
B:For ticket 1, check PSU capacity and transient load behavior before replacing the CPU cooler. Power demand may exceed the supply despite acceptable component temperatures. For ticket 2, replace the supported CMOS/RTC battery and reconfigure UEFI settings as needed. The RTC battery maintains time and some firmware state when mains power is disconnected.
D:For ticket 1, check PSU capacity and transient load behavior before replacing the CPU cooler. Power demand may exceed the supply despite acceptable component temperatures.
Question 375
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A high-end desktop shuts off only when the GPU and CPU both draw peak current, with normal temperatures recorded. A workstation intermittently resets after an expansion card was installed and its auxiliary power connector remains unplugged. Which response best addresses these needs?
- Check PSU capacity and transient load behavior before replacing the CPU cooler; connect the manufacturer's specified expansion-card power lead and verify the supply budget.
- Replace the supported CMOS/RTC battery and reconfigure UEFI settings as needed; connect the manufacturer's specified expansion-card power lead and verify the supply budget.
- Check PSU capacity and transient load behavior before replacing the CPU cooler; restore the known-good firmware settings and verify the storage controller/boot mode.
- Replace the supported CMOS/RTC battery and reconfigure UEFI settings as needed; restore the known-good firmware settings and verify the storage controller/boot mode.
Explanation
Correct Answer
A:For ticket (1), Power demand may exceed the supply despite acceptable component temperatures. For ticket (2), Unpowered expansion devices can fail under load and trigger unstable system operation.
Incorrect Answers
B:For ticket 1, check PSU capacity and transient load behavior before replacing the CPU cooler. Power demand may exceed the supply despite acceptable component temperatures.
C:For ticket 2, connect the manufacturer's specified expansion-card power lead and verify the supply budget. Unpowered expansion devices can fail under load and trigger unstable system operation.
D:For ticket 1, check PSU capacity and transient load behavior before replacing the CPU cooler. Power demand may exceed the supply despite acceptable component temperatures. For ticket 2, connect the manufacturer's specified expansion-card power lead and verify the supply budget. Unpowered expansion devices can fail under load and trigger unstable system operation.
Question 376
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A computer loses firmware date and custom boot settings whenever it remains unplugged overnight. A technician changes several BIOS options at once and the PC stops detecting its boot disk although hardware tests pass. What is the most appropriate plan for this situation?
- Replace the supported CMOS/RTC battery and reconfigure UEFI settings as needed; restore the known-good firmware settings and verify the storage controller/boot mode.
- Check PSU capacity and transient load behavior before replacing the CPU cooler; restore the known-good firmware settings and verify the storage controller/boot mode.
- Replace the supported CMOS/RTC battery and reconfigure UEFI settings as needed; connect the manufacturer's specified expansion-card power lead and verify the supply budget.
- Check PSU capacity and transient load behavior before replacing the CPU cooler; connect the manufacturer's specified expansion-card power lead and verify the supply budget.
Explanation
Correct Answer
A:For ticket (1), The RTC battery maintains time and some firmware state when mains power is disconnected. For ticket (2), Configuration changes can prevent an otherwise healthy installed OS from appearing bootable.
Incorrect Answers
B:For ticket 1, replace the supported CMOS/RTC battery and reconfigure UEFI settings as needed. The RTC battery maintains time and some firmware state when mains power is disconnected.
C:For ticket 2, restore the known-good firmware settings and verify the storage controller/boot mode. Configuration changes can prevent an otherwise healthy installed OS from appearing bootable.
D:For ticket 1, replace the supported CMOS/RTC battery and reconfigure UEFI settings as needed. The RTC battery maintains time and some firmware state when mains power is disconnected. For ticket 2, restore the known-good firmware settings and verify the storage controller/boot mode. Configuration changes can prevent an otherwise healthy installed OS from appearing bootable.
Question 377
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A workstation intermittently resets after an expansion card was installed and its auxiliary power connector remains unplugged. A technician changes several BIOS options at once and the PC stops detecting its boot disk although hardware tests pass. Which course of action addresses the stated issues?
- Connect the manufacturer's specified expansion-card power lead and verify the supply budget; replace the supported CMOS/RTC battery and reconfigure UEFI settings as needed.
- Check PSU capacity and transient load behavior before replacing the CPU cooler; replace the supported CMOS/RTC battery and reconfigure UEFI settings as needed.
- Connect the manufacturer's specified expansion-card power lead and verify the supply budget; restore the known-good firmware settings and verify the storage controller/boot mode.
- Check PSU capacity and transient load behavior before replacing the CPU cooler; restore the known-good firmware settings and verify the storage controller/boot mode.
Explanation
Correct Answer
C:For ticket (1), Unpowered expansion devices can fail under load and trigger unstable system operation. For ticket (2), Configuration changes can prevent an otherwise healthy installed OS from appearing bootable.
Incorrect Answers
A:For ticket 2, restore the known-good firmware settings and verify the storage controller/boot mode. Configuration changes can prevent an otherwise healthy installed OS from appearing bootable.
B:For ticket 1, connect the manufacturer's specified expansion-card power lead and verify the supply budget. Unpowered expansion devices can fail under load and trigger unstable system operation. For ticket 2, restore the known-good firmware settings and verify the storage controller/boot mode. Configuration changes can prevent an otherwise healthy installed OS from appearing bootable.
D:For ticket 1, connect the manufacturer's specified expansion-card power lead and verify the supply budget. Unpowered expansion devices can fail under load and trigger unstable system operation.
Question 378
A service coordinator has THREE separate support tickets and needs the correct matching actions: A high-end desktop shuts off only when the GPU and CPU both draw peak current, with normal temperatures recorded. A computer loses firmware date and custom boot settings whenever it remains unplugged overnight. A workstation intermittently resets after an expansion card was installed and its auxiliary power connector remains unplugged. Which response best addresses these needs?
- Check PSU capacity and transient load behavior before replacing the CPU cooler; replace the supported CMOS/RTC battery and reconfigure UEFI settings as needed; and restore the known-good firmware settings and verify the storage controller/boot mode.
- Check PSU capacity and transient load behavior before replacing the CPU cooler; replace the supported CMOS/RTC battery and reconfigure UEFI settings as needed; and connect the manufacturer's specified expansion-card power lead and verify the supply budget.
- Restore the known-good firmware settings and verify the storage controller/boot mode; replace the supported CMOS/RTC battery and reconfigure UEFI settings as needed; and connect the manufacturer's specified expansion-card power lead and verify the supply budget.
- Check PSU capacity and transient load behavior before replacing the CPU cooler; restore the known-good firmware settings and verify the storage controller/boot mode; and connect the manufacturer's specified expansion-card power lead and verify the supply budget.
Explanation
Correct Answer
B:For ticket (1), Power demand may exceed the supply despite acceptable component temperatures. For ticket (2), The RTC battery maintains time and some firmware state when mains power is disconnected. For ticket (3), Unpowered expansion devices can fail under load and trigger unstable system operation.
Incorrect Answers
A:For ticket 3, connect the manufacturer's specified expansion-card power lead and verify the supply budget. Unpowered expansion devices can fail under load and trigger unstable system operation.
C:For ticket 1, check PSU capacity and transient load behavior before replacing the CPU cooler. Power demand may exceed the supply despite acceptable component temperatures.
D:For ticket 2, replace the supported CMOS/RTC battery and reconfigure UEFI settings as needed. The RTC battery maintains time and some firmware state when mains power is disconnected.
Question 379
An IT support worker is asked to resolve this case: A convertible laptop displays a clear image but ignores finger touches, while its external mouse works. Which next step MOST directly resolves the reported condition?
- Check the backlight and inverter circuitry using appropriate service methods.
- Confirm the actual panel/backlight design before ordering legacy inverter components.
- Calibrate the supported digitizer and verify its controller configuration before replacing the LCD.
- Diagnose the touch digitizer and its driver/connection independently of the image panel.
Explanation
Correct Answer
D:Displaying pixels and sensing touch are separate functions on many convertible assemblies.
Incorrect Answers
A:Failed backlighting can leave a faint LCD image that is only visible with external illumination; displaying pixels and sensing touch are separate functions on many convertible assemblies.
B:Modern LED backlights generally use different power-driving circuits from older fluorescent displays; displaying pixels and sensing touch are separate functions on many convertible assemblies.
C:Touch coordinate mapping can be incorrect even when the display image itself is sharp; displaying pixels and sensing touch are separate functions on many convertible assemblies.
Question 380
A service bench observes this hardware or network symptom: A CCFL-backlit legacy laptop screen becomes barely visible under a flashlight, although the computer still generates a video image. What should the support specialist recommend FIRST within the stated limits?
- Calibrate the supported digitizer and verify its controller configuration before replacing the LCD.
- Diagnose the touch digitizer and its driver/connection independently of the image panel.
- Check the backlight and inverter circuitry using appropriate service methods.
- Confirm the actual panel/backlight design before ordering legacy inverter components.
Explanation
Correct Answer
C:Failed backlighting can leave a faint LCD image that is only visible with external illumination.
Incorrect Answers
A:Touch coordinate mapping can be incorrect even when the display image itself is sharp; failed backlighting can leave a faint LCD image that is only visible with external illumination.
B:Displaying pixels and sensing touch are separate functions on many convertible assemblies; failed backlighting can leave a faint LCD image that is only visible with external illumination.
D:Modern LED backlights generally use different power-driving circuits from older fluorescent displays; failed backlighting can leave a faint LCD image that is only visible with external illumination.
CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests