Question 230
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: An upgraded desktop boots with half its installed capacity because one module is not recognized after transport. A server reports corrected ECC events increasing on a single DIMM while the application continues working. Which course of action addresses the stated issues?
- Explain and, if supported, install a matched module in the corresponding second channel; restore a supported memory speed and test stability before suspecting the power supply.
- Check socket population and reseat modules one at a time following the memory troubleshooting guide; correlate the ECC event logs to the affected module and plan supported replacement.
- Explain and, if supported, install a matched module in the corresponding second channel; correlate the ECC event logs to the affected module and plan supported replacement.
- Check socket population and reseat modules one at a time following the memory troubleshooting guide; restore a supported memory speed and test stability before suspecting the power supply.
Explanation
Correct Answer
B:For ticket (1), Missing capacity may reflect a poorly seated module or unsupported configuration, not a storage failure. For ticket (2), Correctable errors can warn of deteriorating memory before an uncorrectable outage occurs.
Incorrect Answers
A:For ticket 1, check socket population and reseat modules one at a time following the memory troubleshooting guide. Missing capacity may reflect a poorly seated module or unsupported configuration, not a storage failure. For ticket 2, correlate the ECC event logs to the affected module and plan supported replacement. Correctable errors can warn of deteriorating memory before an uncorrectable outage occurs.
C:For ticket 1, check socket population and reseat modules one at a time following the memory troubleshooting guide. Missing capacity may reflect a poorly seated module or unsupported configuration, not a storage failure.
D:For ticket 2, correlate the ECC event logs to the affected module and plan supported replacement. Correctable errors can warn of deteriorating memory before an uncorrectable outage occurs.
Question 231
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: An upgraded desktop boots with half its installed capacity because one module is not recognized after transport. A dual-channel workstation has one memory module and the owner expects dual-channel bandwidth with no second channel populated. Which response best addresses these needs?
- Check socket population and reseat modules one at a time following the memory troubleshooting guide; Explain and, if supported, install a matched module in the corresponding second channel.
- Correlate the ECC event logs to the affected module and plan supported replacement; Explain and, if supported, install a matched module in the corresponding second channel.
- Check socket population and reseat modules one at a time following the memory troubleshooting guide; restore a supported memory speed and test stability before suspecting the power supply.
- Correlate the ECC event logs to the affected module and plan supported replacement; restore a supported memory speed and test stability before suspecting the power supply.
Explanation
Correct Answer
A:For ticket (1), Missing capacity may reflect a poorly seated module or unsupported configuration, not a storage failure. For ticket (2), Multi-channel operation depends on populated memory channels rather than software configuration alone.
Incorrect Answers
B:For ticket 1, check socket population and reseat modules one at a time following the memory troubleshooting guide. Missing capacity may reflect a poorly seated module or unsupported configuration, not a storage failure.
C:For ticket 2, explain and, if supported, install a matched module in the corresponding second channel. Multi-channel operation depends on populated memory channels rather than software configuration alone.
D:For ticket 1, check socket population and reseat modules one at a time following the memory troubleshooting guide. Missing capacity may reflect a poorly seated module or unsupported configuration, not a storage failure. For ticket 2, explain and, if supported, install a matched module in the corresponding second channel. Multi-channel operation depends on populated memory channels rather than software configuration alone.
Question 232
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A server reports corrected ECC events increasing on a single DIMM while the application continues working. A desktop memory training loop occurs only after enabling an aggressive overclocked profile above the vendor-supported speed. What is the most appropriate plan for this situation?
- Check socket population and reseat modules one at a time following the memory troubleshooting guide; Explain and, if supported, install a matched module in the corresponding second channel.
- Correlate the ECC event logs to the affected module and plan supported replacement; restore a supported memory speed and test stability before suspecting the power supply.
- Check socket population and reseat modules one at a time following the memory troubleshooting guide; restore a supported memory speed and test stability before suspecting the power supply.
- Correlate the ECC event logs to the affected module and plan supported replacement; Explain and, if supported, install a matched module in the corresponding second channel.
Explanation
Correct Answer
B:For ticket (1), Correctable errors can warn of deteriorating memory before an uncorrectable outage occurs. For ticket (2), Excessive memory timing or frequency settings can prevent reliable initialization.
Incorrect Answers
A:For ticket 1, correlate the ECC event logs to the affected module and plan supported replacement. Correctable errors can warn of deteriorating memory before an uncorrectable outage occurs. For ticket 2, restore a supported memory speed and test stability before suspecting the power supply. Excessive memory timing or frequency settings can prevent reliable initialization.
C:For ticket 1, correlate the ECC event logs to the affected module and plan supported replacement. Correctable errors can warn of deteriorating memory before an uncorrectable outage occurs.
D:For ticket 2, restore a supported memory speed and test stability before suspecting the power supply. Excessive memory timing or frequency settings can prevent reliable initialization.
Question 233
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A dual-channel workstation has one memory module and the owner expects dual-channel bandwidth with no second channel populated. A desktop memory training loop occurs only after enabling an aggressive overclocked profile above the vendor-supported speed. Which course of action addresses the stated issues?
- Check socket population and reseat modules one at a time following the memory troubleshooting guide; restore a supported memory speed and test stability before suspecting the power supply.
- Explain and, if supported, install a matched module in the corresponding second channel; correlate the ECC event logs to the affected module and plan supported replacement.
- Check socket population and reseat modules one at a time following the memory troubleshooting guide; correlate the ECC event logs to the affected module and plan supported replacement.
- Explain and, if supported, install a matched module in the corresponding second channel; restore a supported memory speed and test stability before suspecting the power supply.
Explanation
Correct Answer
D:For ticket (1), Multi-channel operation depends on populated memory channels rather than software configuration alone. For ticket (2), Excessive memory timing or frequency settings can prevent reliable initialization.
Incorrect Answers
A:For ticket 1, explain and, if supported, install a matched module in the corresponding second channel. Multi-channel operation depends on populated memory channels rather than software configuration alone.
B:For ticket 2, restore a supported memory speed and test stability before suspecting the power supply. Excessive memory timing or frequency settings can prevent reliable initialization.
C:For ticket 1, explain and, if supported, install a matched module in the corresponding second channel. Multi-channel operation depends on populated memory channels rather than software configuration alone. For ticket 2, restore a supported memory speed and test stability before suspecting the power supply. Excessive memory timing or frequency settings can prevent reliable initialization.
Question 234
A service coordinator has THREE separate support tickets and needs the correct matching actions: An upgraded desktop boots with half its installed capacity because one module is not recognized after transport. A server reports corrected ECC events increasing on a single DIMM while the application continues working. A dual-channel workstation has one memory module and the owner expects dual-channel bandwidth with no second channel populated. Which response best addresses these needs?
- Check socket population and reseat modules one at a time following the memory troubleshooting guide; correlate the ECC event logs to the affected module and plan supported replacement; and restore a supported memory speed and test stability before suspecting the power supply.
- Check socket population and reseat modules one at a time following the memory troubleshooting guide; correlate the ECC event logs to the affected module and plan supported replacement; and Explain and, if supported, install a matched module in the corresponding second channel.
- Restore a supported memory speed and test stability before suspecting the power supply; correlate the ECC event logs to the affected module and plan supported replacement; and Explain and, if supported, install a matched module in the corresponding second channel.
- Check socket population and reseat modules one at a time following the memory troubleshooting guide; restore a supported memory speed and test stability before suspecting the power supply; and Explain and, if supported, install a matched module in the corresponding second channel.
Explanation
Correct Answer
B:For ticket (1), Missing capacity may reflect a poorly seated module or unsupported configuration, not a storage failure. For ticket (2), Correctable errors can warn of deteriorating memory before an uncorrectable outage occurs. For ticket (3), Multi-channel operation depends on populated memory channels rather than software configuration alone.
Incorrect Answers
A:For ticket 3, explain and, if supported, install a matched module in the corresponding second channel. Multi-channel operation depends on populated memory channels rather than software configuration alone.
C:For ticket 1, check socket population and reseat modules one at a time following the memory troubleshooting guide. Missing capacity may reflect a poorly seated module or unsupported configuration, not a storage failure.
D:For ticket 2, correlate the ECC event logs to the affected module and plan supported replacement. Correctable errors can warn of deteriorating memory before an uncorrectable outage occurs.
Question 235
An IT support worker is asked to resolve this case: A desktop monitor has one permanently bright dot that stays in place across different computers and cables. Which next step MOST directly resolves the reported condition?
- Evaluate pixel response behavior and suitable overdrive settings for the display.
- Calibrate the affected display and inspect its color-profile and panel settings.
- Reduce static imagery and follow the vendor's image-retention mitigation guidance.
- Check the manufacturer's pixel defect policy and replace the panel if service criteria are met.
Explanation
Correct Answer
D:A persistent fixed bright pixel usually originates within the display panel rather than the graphics driver.
Incorrect Answers
A:Pixel transition time affects motion blur separately from static resolution; a persistent fixed bright pixel usually originates within the display panel rather than the graphics driver.
B:Monitor calibration and panel state can alter color independently of the GPU output; a persistent fixed bright pixel usually originates within the display panel rather than the graphics driver.
C:Prolonged fixed content can cause uneven OLED pixel aging and visible burn-in; a persistent fixed bright pixel usually originates within the display panel rather than the graphics driver.
Question 236
A service bench observes this hardware or network symptom: A user sees motion smearing on a slow display panel during fast scrolling, but static text remains sharp. What should the support specialist recommend FIRST within the stated limits?
- Evaluate pixel response behavior and suitable overdrive settings for the display.
- Calibrate the affected display and inspect its color-profile and panel settings.
- Reduce static imagery and follow the vendor's image-retention mitigation guidance.
- Check the manufacturer's pixel defect policy and replace the panel if service criteria are met.
Explanation
Correct Answer
A:Pixel transition time affects motion blur separately from static resolution.
Incorrect Answers
B:Monitor calibration and panel state can alter color independently of the GPU output; pixel transition time affects motion blur separately from static resolution.
C:Prolonged fixed content can cause uneven OLED pixel aging and visible burn-in; pixel transition time affects motion blur separately from static resolution.
D:A persistent fixed bright pixel usually originates within the display panel rather than the graphics driver; pixel transition time affects motion blur separately from static resolution.
Question 237
During a controlled office IT maintenance window, the technician notes: A photo workstation shows a strong color cast even after a replacement GPU, but another display connected to the GPU looks correct. What is the MOST appropriate technician action?
- Check the manufacturer's pixel defect policy and replace the panel if service criteria are met.
- Evaluate pixel response behavior and suitable overdrive settings for the display.
- Calibrate the affected display and inspect its color-profile and panel settings.
- Reduce static imagery and follow the vendor's image-retention mitigation guidance.
Explanation
Correct Answer
C:Monitor calibration and panel state can alter color independently of the GPU output.
Incorrect Answers
A:A persistent fixed bright pixel usually originates within the display panel rather than the graphics driver; monitor calibration and panel state can alter color independently of the GPU output.
B:Pixel transition time affects motion blur separately from static resolution; monitor calibration and panel state can alter color independently of the GPU output.
D:Prolonged fixed content can cause uneven OLED pixel aging and visible burn-in; monitor calibration and panel state can alter color independently of the GPU output.
Question 238
A support case documents the following situation: An OLED kiosk displays permanent faint outlines of a menu that remains on screen every day. Which response BEST addresses the actual cause or requirement?
- Check the manufacturer's pixel defect policy and replace the panel if service criteria are met.
- Evaluate pixel response behavior and suitable overdrive settings for the display.
- Calibrate the affected display and inspect its color-profile and panel settings.
- Reduce static imagery and follow the vendor's image-retention mitigation guidance.
Explanation
Correct Answer
D:Prolonged fixed content can cause uneven OLED pixel aging and visible burn-in.
Incorrect Answers
A:A persistent fixed bright pixel usually originates within the display panel rather than the graphics driver; prolonged fixed content can cause uneven OLED pixel aging and visible burn-in.
B:Pixel transition time affects motion blur separately from static resolution; prolonged fixed content can cause uneven OLED pixel aging and visible burn-in.
C:Monitor calibration and panel state can alter color independently of the GPU output; prolonged fixed content can cause uneven OLED pixel aging and visible burn-in.
Question 239
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A desktop monitor has one permanently bright dot that stays in place across different computers and cables. A user sees motion smearing on a slow display panel during fast scrolling, but static text remains sharp. Which course of action addresses the stated issues?
- Calibrate the affected display and inspect its color-profile and panel settings; evaluate pixel response behavior and suitable overdrive settings for the display.
- Check the manufacturer's pixel defect policy and replace the panel if service criteria are met; Reduce static imagery and follow the vendor's image-retention mitigation guidance.
- Calibrate the affected display and inspect its color-profile and panel settings; Reduce static imagery and follow the vendor's image-retention mitigation guidance.
- Check the manufacturer's pixel defect policy and replace the panel if service criteria are met; evaluate pixel response behavior and suitable overdrive settings for the display.
Explanation
Correct Answer
D:For ticket (1), A persistent fixed bright pixel usually originates within the display panel rather than the graphics driver. For ticket (2), Pixel transition time affects motion blur separately from static resolution.
Incorrect Answers
A:For ticket 1, check the manufacturer's pixel defect policy and replace the panel if service criteria are met. A persistent fixed bright pixel usually originates within the display panel rather than the graphics driver.
B:For ticket 2, evaluate pixel response behavior and suitable overdrive settings for the display. Pixel transition time affects motion blur separately from static resolution.
C:For ticket 1, check the manufacturer's pixel defect policy and replace the panel if service criteria are met. A persistent fixed bright pixel usually originates within the display panel rather than the graphics driver. For ticket 2, evaluate pixel response behavior and suitable overdrive settings for the display. Pixel transition time affects motion blur separately from static resolution.
Question 240
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A desktop monitor has one permanently bright dot that stays in place across different computers and cables. A photo workstation shows a strong color cast even after a replacement GPU, but another display connected to the GPU looks correct. Which response best addresses these needs?
- Evaluate pixel response behavior and suitable overdrive settings for the display; Calibrate the affected display and inspect its color-profile and panel settings.
- Check the manufacturer's pixel defect policy and replace the panel if service criteria are met; Reduce static imagery and follow the vendor's image-retention mitigation guidance.
- Evaluate pixel response behavior and suitable overdrive settings for the display; Reduce static imagery and follow the vendor's image-retention mitigation guidance.
- Check the manufacturer's pixel defect policy and replace the panel if service criteria are met; Calibrate the affected display and inspect its color-profile and panel settings.
Explanation
Correct Answer
D:For ticket (1), A persistent fixed bright pixel usually originates within the display panel rather than the graphics driver. For ticket (2), Monitor calibration and panel state can alter color independently of the GPU output.
Incorrect Answers
A:For ticket 1, check the manufacturer's pixel defect policy and replace the panel if service criteria are met. A persistent fixed bright pixel usually originates within the display panel rather than the graphics driver.
B:For ticket 2, calibrate the affected display and inspect its color-profile and panel settings. Monitor calibration and panel state can alter color independently of the GPU output.
C:For ticket 1, check the manufacturer's pixel defect policy and replace the panel if service criteria are met. A persistent fixed bright pixel usually originates within the display panel rather than the graphics driver. For ticket 2, calibrate the affected display and inspect its color-profile and panel settings. Monitor calibration and panel state can alter color independently of the GPU output.
CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests